If I partition and install Ubuntu on part of my pc's hardrive, would the digital image factory-settings restore feature still be available? If so, and if used, would a factory restore use 100% of the hardrive and erase the Ubuntu install?
View 3 Replies
How can i take a image of my Ubuntu machine. I have used Norton Ghost to take image of my C drive (that contains windows XP). Is there any software available that can do the same for my Ubuntu machine?
View 3 Replies View RelatedMy laptop is Windows XP Fedora 11 dual boot. I am replacing it because of a defect. The original laptop is fairly new so I could simply start from scratch and setup everything again. But I was thinking there might be a way to do an image backup and restore. My new laptop will be identical to the old one
View 1 Replies View RelatedI do computer forensics here in Afghanistan and I am trying to keep a clean image of a dual bootable hard drive. Here is what I try to do...
1. Boot into UbuntuLiveCD
2. I run "sudo dd if=/dev/zero of=/dev/sda conv=sync,notrunc bs=64K" to wipe the drive with all zeros.
3. I then install Windows by creating a new partician about 50GB.
4. I then install Linux by creating a partician in ext4 mounting it at '/' in addition I create a swap partician.
5. Next configure everything just the way I want it. I install all the drivers and software I need for my windows partician and build out the remaining part of the disc as a "data drive."
6. Then I use "dd" again to try to image my "clean slate" of a system. Remember I am dual booting. I dd the /dev/sda and gzip it.
7. When I go to restore it, I boot from the live CD again and unzip ig and "dd" it back onto /dev/sda.
8. I run fdisk -l and I get:/dev/sda1 * 1 6375 5120000000 7 HPFS/NTFS/dev/sda2 6376 11724 42965842+ 83 Linux/dev/sda3 11725 12453 ...... 82 Linux swap / Solaris.This means to me that it can "understand the file system"
9. But then when I take out the Live boot CD and try to get my "clean slate" machine back, the system goes into Grub Rescue mode with a grub command line "grub rescue>"
10. I tried using the tutorial on Grub2, but...
a. It would not understand the command "linux"
b. When I try to do insmod, it says it doesn't recognize the file system.
I plan on creating a backup of my Windows installation using DriveImage XML (unless you have a better idea ) then wiping my hard drive clean, creating a new partition for the backup install to live, and then installing Ubuntu on another partition. Is there a method of restoring my Windows backup to partition 1 by using the live cd? Then of course I can install ubuntu to partition 2.
View 2 Replies View RelatedI got a nice Christmas gift, a Westinghouse 42" TV/Monitor, and it works great with Ubuntu 10.10. The one problem I have is watching Hulu movies on it. When I go to full screen mode, the digital image slows and get blocky. When I check the settings, it is telling me I have a 32" not a 42" and there is no way to change it. It does tell me I have a Westinghouse. I also have a Roku and I believe it has a Linux OS on it and it works great
View 4 Replies View RelatedI'm looking to partition HD to place Ubuntu 11, and not destroy Windows Vista, here's what I see, Allocate drive space,
/dev/sda
/dev/sda1 ntfs 310641 MB unknown
/dev/sda2 ntfs 9428 MB 8346 MB
below that,
Device for boot loader installation
/dev/sda ATA ST3320820AS (320.1GB)
what to do next? *UPDATE: I think my HD is bad, I went ahead with the full install and get; Error: Input/output error during read on/dev/sda. The reason I started this was problems with HD and Vista OS, but after running Ubuntu live CD and being able to see the HD contents which showed Main partition with a boot exclamation and the recovery partition I thought it might be OK still.
Debian Wheezy upgraded to Jessie. I can't install my grsec kernel. I did everything exactly like they say on website: [URL] ....
patching: grsecurity-3.0-3.2.66-201502180830.patch and linux-3.2.66 -o.k
then ''make menuconfig'': Configuration Method - Automatic (for virtualbox hosting) -o.k
compiling the kernel: 'fakeroot make deb-pkg' -o.k
and last step, installing new kernel : ''dpkg -i *.deb'' -not o.k
Below is the output from executing command : dpkg -i *.deb which supposed to install 3.2.66-grsec linux-image:
root@debian:/home/userone/Downloads/grsecurity.net/1# ls
grsecurity-3.0-3.2.66-201502180830.patch
linux-3.2.66
linux-firmware-image_3.2.66-grsec-1_amd64.deb
linux-headers-3.2.66-grsec_3.2.66-grsec-1_amd64.deb
[Code] ....
After restarting, old kernel is booting, however from booting menu under advanced GNU/Linux options i can choice 3.2.66-grsec linux-image to boot, unfortunately it 'panics' (kernel panic - not syncing: grsec: halting the system due to suspicious kernel crash caused by root) and only way to turn off the computer is to hold down power button.
I am having a problem finding a piece of software. I've searched a lot and still have not come up with an answer. My situation is as follows: I have an image file the I wish to restore to my USB flash drive but so far I've had no luck doing this. I was wondering if there was a program/command that could help me restore the disk image.
View 4 Replies View RelatedIf i have 10 GB partition of '/'. Now i took the image of it for backup purpose. Now lets say my HD failed. I replaced the HD, and this time i created '/' partition of 20 GB. Can i restore the previous image of 10 GB over 20 GB ?
View 2 Replies View RelatedI have 4 different servers with exactly the same hardware. I set up one of them to have a centos install with all the basic stuff I'd like running on each one. I then created an image of the harddrive with the operating system, and stored it on an external drive. I used dd to copy the external image to one of the new machines. It worked fine, everything booted up as normal and with a few tweaks everything was great. The problem is that the drive is rather large (500gb) and it takes days for dd to copy it over. I decided to try a different route, I booted to a usb (using the linux distro on the ultimate boot cd pre-loaded with gparted). There are two partitions on the external drive, a small (100mb) partition which can easily be copied over with gparted, and the larger 480+gb lvm partition.
Gparted doesn't support lvm, so I used fdisk to create a new lvm partition on the new machine, and then pvcreate/vgcreate/lvcreate to re-create the same volume groups/logical volumes that are in the image on the external harddrive. I rsync'ed all the information over from LogVol00, and made the same swap partition LogVol01 (which took WAY less time). I disconnected the hard drive and renamed the volume group to VolGroup00 (initiall I named it differently, since linux doesn't like having the volume groups named the same). I can mount the LogVol00 partition and see all the files as they should be. But when I try and boot up, it doesn't even go to grub, I just end up with a blank screen and blinking cursor. How to make the drive bootable? Alternatively, a better strategy than using dd to restore this image??
I've stored 3 images to home partition on Debian machine, now I'm trying to restore image from Debian machine to usb hdd, and there is no option to restore from image. The version of clonezilla that I'm using is clonezillla-live-maverick.
View 6 Replies View Relateddear sirs, i have taken image of 1 machine using acronis ver9.0 which has3gb swap /sda1
25gb /slash /sda2108gb /oracle /sda3so on another machine when i restore everything restore and data i can see, but boot, MBR not working.it just come written on screen "GRUB"i try to reinstall grub not workingbooth rhel cdthen type >linux rescue> chroot /mnt/sysimage>/sbin/grub-install /dev/sda2it give me error does not work and i reboot the machine.can someone teach or guide how to restore,repair, or fixed MBR
I have a Debian Jessie 32 bits machine with standard partitions : one EFI, one for the root system and a swap.
I did a dd image backup of it hard drive thinking i would be easy to restore it or clone to another device... but it seems it is not that simple ! My PC won't boot : no bootable drive found !
I did the same once with a 64 bit Debian Jessie which i fixed using an ubuntu live CD with boot-repair, but here with the 32 bits version it doesn't work : it keeps saying i have an EFI incompatible partition and i should use a 64 bits linux...
Note : i boot-repair from a 64 bits ubuntu live cd. Should i use a 32 bits version ? Because i can"t make a 32 bits Debian live CD to boot, usb key won't show up in boot options (32 bits install CD works fine)
I ha read some things and tried some others but nothing works
Grub and EFI are really obscure for me...
How could i fix my debian 32 boot ?
Or how can i properly clone my debian 32 on other PC ? am i missing something using dd ? should i use another tool ?
I have recently setup a dual boot system that consist of Windows Vista and Fedora 12, I am looking for a solution that will allow me to create an entire restore image for both OS's on an external hard drive. I am looking for something that is easy to use, stable, and free. I have looked at clonezilla and have used Norton ghost 2003 in the past which is not supported with Windows Vista.
View 3 Replies View RelatedI'd like to create a boot floppy or CD to restore an image from a harddisk over the network, and it should work possibly automatically.
A normal, non-IT user should be able to do it in our branch abroad.
i'm wondering if it's possible to restore the original image file that you have hidden data in with steghide. The basic Idea is you have a photo using gpg sign it and then embed the signature. then remove the signature at a later time and check it with the signature. I hope another "inverse" algorithm doesn't need to be written to undo the first (if a "inverse algorithm is possible). This assume you already have the pass phrase or that there is no pass phrase. I already know how to retrieve the original file just want to remove the hidden data from the Image and restore it's attributes.
View 2 Replies View RelatedI have an Ubuntu server and i've installed drbl-clonezilla to clone and restore pc, I have a 40 gigabyte image to be deployed on other pc's with larger hard drive ex. 160 GB or 240giga, my problem is that when I deploy the image on a larger disk I end up with a disk with a partition of 40 GB and the rest unallocated, how can i restore the the disk and use full disk space, the goal is to automate the process. In clonezilla-drbl there is the possibility to start a "prerun" and "postrun" fonction that could help complete the deployment process.
View 2 Replies View RelatedI used Clonezilla an older version not the latest to backup an entire NTFS Windows XP drive to DVD last year. I have a series of three (3) of these DVD's but now cannot restore the backup image back to the same PC. The problem is that when booting with Clonezilla I don't have an option to restore from a CD or DVD drive since the computer comes with two working CD/DVD drives that are detected by the BIOS when the POST is displayed. I used one of these drives to boot with Clonezilla and the other one containing the backup image Disk 1 of Disk 3. Clonezilla only detects the two hard drives and a USB drive which is removable. Is there a bug in the restore process because it allowed me to backup the entire image of the hard drive onto a DVD last year but this time around there are no CD or DVD drive options available to choose other then the CD drive Clonezilla was used to boot up.
View 8 Replies View RelatedAm quite new to Ubuntu (10.04) and have recently reinstalled XP. I want to make an image of my windows partition to save time and effort when wanting to restore this. I read the Ubuntu documentation on Drive Imaging [URL]..community/DriveImaging and am wondering if I've done things ok?
I've booted using the Live CD. Windows is on sda1 and is a 50GB partition. I have a hidden ntfs partition on the same hard drive at sda9 of 10GB. The first time I tried this I got an error regarding my output file saying "Not a directory". I'm assuming that was because I hadn't mounted sda9. It also reported an error saying permission denied on sda1. I then mounted sda9
Code:
sudo mount /dev/sda9 /mnt
I then changed to root as I thought not being in that was why I was getting the permissions error.
Code:
sudo -s
I've then done the following;
Code:
dd if=/dev/sda1 bs=1024 | gzip > /mnt/sda1.bin.gz
The terminal window is just showing a flashing cursor in the bottom left corner under the above command line input. Is the fact that my mount partition being smaller than my windows partition going to cause a problem or will gzip solve that? My Windows install occupies about 7.5GB of the 50GB partion.
I'm not sure if dd is just taking a long time to complete the task???
Image Hard drive Ubuntu Operating system 9.10 Complete back up and restore. Changing over Hard Drives need a complete back up not just save files. So the image can be restored on any hard drive that restores the computer to its original state before it was imaged.
View 14 Replies View RelatedI have just installed my first Ubuntu. While installing it, I have checked the box "Install with other OS". The next step was to choose partition where to install Ubuntu. There I checked "whole partition", because I wanted Ubuntu on the same partition where my Win7 was, and I thought that it will save all the data because in previous step I checked that box. However, it didn't saved anything. My hard disk is formatted and I didn't saved any data Is there any way that I can restore my system to previous state, or at least to retrieve some data?
View 5 Replies View RelatedI want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View Relatedmy question is quite simple and at the same time should even sound weird for people that is used to use raids... but here we go! I have got 2 hard disks that do match in space. I'd like to use mdadm to create a raid 1, the mirror one. Since I don't want to format / erase / delete what's in my primary hard disk (/dev/sda, 3 partitions), how can I replicate its content into /dev/sdb and mirror it with the raid tool? Does something like this work?
- install madam
- fdisk /dev/sdb and replicate sda's partitions (using as filesystem "fd");
- sudo mdadm --create --verbose /dev/md0 --level=mirror --raid-devices=2 /dev/sda1 /dev/sdb1
- sudo mdadm --create --verbose /dev/md1 --level=mirror --raid-devices=2 /dev/sda2 /dev/sdb2
sudo mdadm --create --verbose /dev/md2 --level=mirror --raid-devices=2 /dev/sda3 /dev/sdb3
Do you have any page to point, with the right documentation to achieve a replication of the hard disk without a format of the source disk?
i want to restore grub after installing xp my ubuntu version is 9.10 i had used this find /boot/grub/stage1 . with the previous versions but it didn't work with 9.10 what can i do ??
View 5 Replies View RelatedI've been backing up a lot of my computer data for 2 years now and it has added up to a terabyte, so I went to bestbuy and bought a 1.5 terabyte external hard drive. I went home and I moved all my data on to it.Now it is starting to fail! As soon as I heard clicking noises I copied all the files over back to my original hard drive.
I had alot of personal information on the 1.5 TB hard drive that is failing(it is still working though), and incase when I try to take it back and they restore it, I do not want them looking through my stuff. I have tried the shred command but thats going to take forever just to overwrite one terabyte once.Will a format remove all my personal files from recovery? What are some other things I could try?
While making sure that vmware used runlevel 5, I did not realize to simply check/uncheck radial buttons at bottom of frame because I first saw numbers across the top of the frame; checking, unchecking these seems to apply run levels to all services; since I may have disrupted default settings for some services, I am not sure I did this, but I may have done so before I saw what I should have done, two questions:
(1) Does it matter?
(2) How would I restore defaults with re-installing OS?
have an Intel Core2 Duo system that would dual boot via GRUB between Windows Vista and Fedora 10. I recently attempted to upgrade from Vista to Windows 7, however because the version of Vista I had would not upgrade to Windows7. This has removed the ability to boot into my Fedora 10 installation. After some brief research on the Internet, I created a Live CD of Fedora 12, and booted into that. Accessing the terminal I tried typing:
[liveuser@localhost ~]$ su root
[root@localhost liveuser]# grub
Probing devices to guess BIOS drives. This may take a long time.
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
[code]....
Error 15: File not found
What is needed so I can restore GRUB on my system and boot into Fedora again?`
I'm looking for a script that can look for illegal scripts/services that are being run on OpenVZ VPS from the host node. Things like IRC, EggDrop, Brute Force scripts and such.
View 7 Replies View RelatedWhat I want to do is force my DVD burner to use full writing power on the entire surface of a DVD. This should be able to invisibly damage the contained data, and should work on CDs, DVDs and BRDs too (in theory). I don't want to write data over it, so it's not a matter of having a RW disc or a R one. The result I want to obtain is simply an unreadable disc that does not look damaged. Do you know if there's a program able to ignore a disc being already full and perform this task?
View 2 Replies View Related
