I've stored 3 images to home partition on Debian machine, now I'm trying to restore image from Debian machine to usb hdd, and there is no option to restore from image. The version of clonezilla that I'm using is clonezillla-live-maverick.
View 6 RepliesHow can i take a image of my Ubuntu machine. I have used Norton Ghost to take image of my C drive (that contains windows XP). Is there any software available that can do the same for my Ubuntu machine?
View 3 Replies View RelatedI have a Debian Jessie 32 bits machine with standard partitions : one EFI, one for the root system and a swap.
I did a dd image backup of it hard drive thinking i would be easy to restore it or clone to another device... but it seems it is not that simple ! My PC won't boot : no bootable drive found !
I did the same once with a 64 bit Debian Jessie which i fixed using an ubuntu live CD with boot-repair, but here with the 32 bits version it doesn't work : it keeps saying i have an EFI incompatible partition and i should use a 64 bits linux...
Note : i boot-repair from a 64 bits ubuntu live cd. Should i use a 32 bits version ? Because i can"t make a 32 bits Debian live CD to boot, usb key won't show up in boot options (32 bits install CD works fine)
I ha read some things and tried some others but nothing works
Grub and EFI are really obscure for me...
How could i fix my debian 32 boot ?
Or how can i properly clone my debian 32 on other PC ? am i missing something using dd ? should i use another tool ?
If i have 10 GB partition of '/'. Now i took the image of it for backup purpose. Now lets say my HD failed. I replaced the HD, and this time i created '/' partition of 20 GB. Can i restore the previous image of 10 GB over 20 GB ?
View 2 Replies View Relateddear sirs, i have taken image of 1 machine using acronis ver9.0 which has3gb swap /sda1
25gb /slash /sda2108gb /oracle /sda3so on another machine when i restore everything restore and data i can see, but boot, MBR not working.it just come written on screen "GRUB"i try to reinstall grub not workingbooth rhel cdthen type >linux rescue> chroot /mnt/sysimage>/sbin/grub-install /dev/sda2it give me error does not work and i reboot the machine.can someone teach or guide how to restore,repair, or fixed MBR
Image Hard drive Ubuntu Operating system 9.10 Complete back up and restore. Changing over Hard Drives need a complete back up not just save files. So the image can be restored on any hard drive that restores the computer to its original state before it was imaged.
View 14 Replies View RelatedI lost the password for root on a ubuntu virtual machine. Is there any way to restore it or I need to install a new virtual machine with ubuntu again?
View 2 Replies View RelatedI'm know very little about Linux but decided to set up a machine running Drupal CMS on a Debian machine and it won't go. The folks at Drupal have tried to help but it seems the Debian OS won't do it's PHP thing for Drupal.
That means i'll have to start at the START I guess.
how to become a master of Linux if one is starting from ABC (I can add and subtract, that's what it feels like)
I mount a few locations from a VMware virtual machine, but currently every time I start up VMware I need to re-mount the locations once the VMware image has started up fully, which gets tedious. I'd like to be able to mount them automatically when VMware is started.
I generally double-click the .VMX file (which is associated with VMware Player) to launch the virtual machine, but once it has finished loading I would need to run the mount commands manually or execute a bash script that does it.
Is there any way you can think of to have it done automatically? One way I can think of is to start my virtual machine by running a script that starts VMware player, sleeps for a minute or so, then runs the mount command - but setting the right sleep interval would be difficult because this varies a fair bit - and overall, it's a solution that's kinda icky and that I'd like to avoid if there's some better option.
I have 4 different servers with exactly the same hardware. I set up one of them to have a centos install with all the basic stuff I'd like running on each one. I then created an image of the harddrive with the operating system, and stored it on an external drive. I used dd to copy the external image to one of the new machines. It worked fine, everything booted up as normal and with a few tweaks everything was great. The problem is that the drive is rather large (500gb) and it takes days for dd to copy it over. I decided to try a different route, I booted to a usb (using the linux distro on the ultimate boot cd pre-loaded with gparted). There are two partitions on the external drive, a small (100mb) partition which can easily be copied over with gparted, and the larger 480+gb lvm partition.
Gparted doesn't support lvm, so I used fdisk to create a new lvm partition on the new machine, and then pvcreate/vgcreate/lvcreate to re-create the same volume groups/logical volumes that are in the image on the external harddrive. I rsync'ed all the information over from LogVol00, and made the same swap partition LogVol01 (which took WAY less time). I disconnected the hard drive and renamed the volume group to VolGroup00 (initiall I named it differently, since linux doesn't like having the volume groups named the same). I can mount the LogVol00 partition and see all the files as they should be. But when I try and boot up, it doesn't even go to grub, I just end up with a blank screen and blinking cursor. How to make the drive bootable? Alternatively, a better strategy than using dd to restore this image??
My laptop is Windows XP Fedora 11 dual boot. I am replacing it because of a defect. The original laptop is fairly new so I could simply start from scratch and setup everything again. But I was thinking there might be a way to do an image backup and restore. My new laptop will be identical to the old one
View 1 Replies View RelatedI am having a problem finding a piece of software. I've searched a lot and still have not come up with an answer. My situation is as follows: I have an image file the I wish to restore to my USB flash drive but so far I've had no luck doing this. I was wondering if there was a program/command that could help me restore the disk image.
View 4 Replies View RelatedI have recently setup a dual boot system that consist of Windows Vista and Fedora 12, I am looking for a solution that will allow me to create an entire restore image for both OS's on an external hard drive. I am looking for something that is easy to use, stable, and free. I have looked at clonezilla and have used Norton ghost 2003 in the past which is not supported with Windows Vista.
View 3 Replies View RelatedI'd like to create a boot floppy or CD to restore an image from a harddisk over the network, and it should work possibly automatically.
A normal, non-IT user should be able to do it in our branch abroad.
If I partition and install Ubuntu on part of my pc's hardrive, would the digital image factory-settings restore feature still be available? If so, and if used, would a factory restore use 100% of the hardrive and erase the Ubuntu install?
View 3 Replies View RelatedI used Clonezilla an older version not the latest to backup an entire NTFS Windows XP drive to DVD last year. I have a series of three (3) of these DVD's but now cannot restore the backup image back to the same PC. The problem is that when booting with Clonezilla I don't have an option to restore from a CD or DVD drive since the computer comes with two working CD/DVD drives that are detected by the BIOS when the POST is displayed. I used one of these drives to boot with Clonezilla and the other one containing the backup image Disk 1 of Disk 3. Clonezilla only detects the two hard drives and a USB drive which is removable. Is there a bug in the restore process because it allowed me to backup the entire image of the hard drive onto a DVD last year but this time around there are no CD or DVD drive options available to choose other then the CD drive Clonezilla was used to boot up.
View 8 Replies View RelatedI'm trying to use this tutorial (URL...) to backup my Ubuntu 10.10 (ext3) operating system. I've successfully gotten it into a TAR file on my external hard-drive, but inside the archive are 2 folders: sda5 and media (/media/sda5/), sda5 ofcourse containing my operating system.
I run VMWare as my virtual machine software, but I could easily run Virtual Box if the situation calls for it. On my virtual machine I created an Extended partition, made a 2GB swap space and the rest is ext3 (ext3 space is mounted as sda1) (at this point, Swap is OFF) here is what I've tried to do inside the virtual machine to restore:
Code:
sudo -s
mkdir /media/FROM/
mkdir /media/TO/
mount /dev/sdb1 /media/FROM/
[Code]...
but instead it just creates the directory sda5 under media of the live ubuntu cd Do I need to CHRoot in these conditions? AFTER I get the files successfully into the virtual machine, how do I go about restoring the grub2 bootloader? Right now I haven't tried to restore grub on my hardware, but I would be interested in doing so. There are a vast immense amount of forum posts about this subject, but all are to mixed results. Can anybody tell me the absolute definite way to restore grub2 successfully, I don't want to try something if it's going to mess up my install, whether I've backed up or not.
for further reference, here is a link to the previous (failed) thread I made about this same subject:
[URL]...
i want to know whether there is any module to restore my linux machine before 5 days as like in windows
View 1 Replies View RelatedI do computer forensics here in Afghanistan and I am trying to keep a clean image of a dual bootable hard drive. Here is what I try to do...
1. Boot into UbuntuLiveCD
2. I run "sudo dd if=/dev/zero of=/dev/sda conv=sync,notrunc bs=64K" to wipe the drive with all zeros.
3. I then install Windows by creating a new partician about 50GB.
4. I then install Linux by creating a partician in ext4 mounting it at '/' in addition I create a swap partician.
5. Next configure everything just the way I want it. I install all the drivers and software I need for my windows partician and build out the remaining part of the disc as a "data drive."
6. Then I use "dd" again to try to image my "clean slate" of a system. Remember I am dual booting. I dd the /dev/sda and gzip it.
7. When I go to restore it, I boot from the live CD again and unzip ig and "dd" it back onto /dev/sda.
8. I run fdisk -l and I get:/dev/sda1 * 1 6375 5120000000 7 HPFS/NTFS/dev/sda2 6376 11724 42965842+ 83 Linux/dev/sda3 11725 12453 ...... 82 Linux swap / Solaris.This means to me that it can "understand the file system"
9. But then when I take out the Live boot CD and try to get my "clean slate" machine back, the system goes into Grub Rescue mode with a grub command line "grub rescue>"
10. I tried using the tutorial on Grub2, but...
a. It would not understand the command "linux"
b. When I try to do insmod, it says it doesn't recognize the file system.
i'm wondering if it's possible to restore the original image file that you have hidden data in with steghide. The basic Idea is you have a photo using gpg sign it and then embed the signature. then remove the signature at a later time and check it with the signature. I hope another "inverse" algorithm doesn't need to be written to undo the first (if a "inverse algorithm is possible). This assume you already have the pass phrase or that there is no pass phrase. I already know how to retrieve the original file just want to remove the hidden data from the Image and restore it's attributes.
View 2 Replies View RelatedI have an Ubuntu server and i've installed drbl-clonezilla to clone and restore pc, I have a 40 gigabyte image to be deployed on other pc's with larger hard drive ex. 160 GB or 240giga, my problem is that when I deploy the image on a larger disk I end up with a disk with a partition of 40 GB and the rest unallocated, how can i restore the the disk and use full disk space, the goal is to automate the process. In clonezilla-drbl there is the possibility to start a "prerun" and "postrun" fonction that could help complete the deployment process.
View 2 Replies View RelatedAm quite new to Ubuntu (10.04) and have recently reinstalled XP. I want to make an image of my windows partition to save time and effort when wanting to restore this. I read the Ubuntu documentation on Drive Imaging [URL]..community/DriveImaging and am wondering if I've done things ok?
I've booted using the Live CD. Windows is on sda1 and is a 50GB partition. I have a hidden ntfs partition on the same hard drive at sda9 of 10GB. The first time I tried this I got an error regarding my output file saying "Not a directory". I'm assuming that was because I hadn't mounted sda9. It also reported an error saying permission denied on sda1. I then mounted sda9
Code:
sudo mount /dev/sda9 /mnt
I then changed to root as I thought not being in that was why I was getting the permissions error.
Code:
sudo -s
I've then done the following;
Code:
dd if=/dev/sda1 bs=1024 | gzip > /mnt/sda1.bin.gz
The terminal window is just showing a flashing cursor in the bottom left corner under the above command line input. Is the fact that my mount partition being smaller than my windows partition going to cause a problem or will gzip solve that? My Windows install occupies about 7.5GB of the 50GB partion.
I'm not sure if dd is just taking a long time to complete the task???
I'm working directly in an Ubuntu Virtual Machine (VM). Some updates (like kernel) were available at the update manager.If I weren't using a VM, I wouldn't update it since it's a risk to break something. Since it's a VM, you can create a Snapshot or export an appliance and restore if something goes wrong.Suppose I'm not using a VM with a Debian/Ubuntu installation. Is there a install-restore approach that doesn't depend in a VM configuration to restore your system exactly before an upgrade (Like a "Restore Point" in Windows), being easy to restore like a VM appliance?
View 8 Replies View RelatedDo i have any chances to restore my windows partition table after tried to install debian and i used the entire disk instead of the free space i had alocated for this
after i figured out what i did i stoped the installation but was to late ... i answered yes at write partition table changes on disk question
i tried win7 automate recovery tool from dvd and manual install of mbr with no successful result
I have a Canon iR3570/iR4570 PXL, and installed the driver CQue 1.0 TCP/IP Queue from Canon webpage.
The problem:
- if i try to print an OpenOffice or LibreOffice Calc with an image and text, the image is not printed (the space is blank).
- if i try to print an OpenOffice or LibreOffice Calc with just an image, it's printed great.
- if i try to print an OpenOffice or LibreOffice Impress, the images are not printed but the text is printed great.
[Code]..
this is a procedure that was put in place before i got here. We basically just install windows and then use this command to create the image
dd if=/dev/sda | gzip -c | split -b 2000m /mnt/foldername/filename.img.gz.
i have been using this for a close to 2 years but have recently run into a problem where i am only getting part of the image. This is the first windows 7 64 bit machine that i have done it on so im not sure if that has to do with it.
the error im getting is dd: reading '/dev/sda' : input/output error
it is erroring out at the exact same point everytime i try it.
How do you create an image of an installed linux system and use it to build other desktops or servers.
View 6 Replies View Relatedwhenever I run my winxp VM image, I will still see the BIOS, but as soon as it begin to boot the hard disk, a black screen will just stay there and nothing else happens. Maybe I was too harsh on my virtual machine and it decided to break down. anyway, Im running on fedora 11 leonidas.Is there any way for me to repair my winxp.img file? or is there any way I can rescue the current situation
View 10 Replies View RelatedI had set up 4 virtual machines on centos 5.5 system where I directed the image locations to an external storage. I have lost the image files in the storage, but I have the image files that were copied from the virtual machine image location. I want to put up the same system on the same computer by copying these backup images. However, when I copy the image file to the same exact location and start the corresponding virtual machine I get "no bootable disk" error. When I increase the size of the image using "qemu-img" commands, I can get rid of this error, but get "error reading disk" error. Is there a way to overcome these problems, or is it not possible to restore a virtual machine by copying the machine image file under ..../xen/images?
View 1 Replies View RelatedI couldn't find a clear answer to this, but is the linux-image-virtual package for host machines that will contain VMs, or a VM-oriented kernel for guest OS (ubuntu)? I have some guest VMs running on Microsoft's Hyper-V, and was looking for some further optimizations.
View 3 Replies View Related