I'd like to create a boot floppy or CD to restore an image from a harddisk over the network, and it should work possibly automatically.
A normal, non-IT user should be able to do it in our branch abroad.
If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
I am having a problem finding a piece of software. I've searched a lot and still have not come up with an answer. My situation is as follows: I have an image file the I wish to restore to my USB flash drive but so far I've had no luck doing this. I was wondering if there was a program/command that could help me restore the disk image.
View 4 Replies View Relatedis there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
View 2 Replies View RelatedI have an Ubuntu server and i've installed drbl-clonezilla to clone and restore pc, I have a 40 gigabyte image to be deployed on other pc's with larger hard drive ex. 160 GB or 240giga, my problem is that when I deploy the image on a larger disk I end up with a disk with a partition of 40 GB and the rest unallocated, how can i restore the the disk and use full disk space, the goal is to automate the process. In clonezilla-drbl there is the possibility to start a "prerun" and "postrun" fonction that could help complete the deployment process.
View 2 Replies View RelatedImage Hard drive Ubuntu Operating system 9.10 Complete back up and restore. Changing over Hard Drives need a complete back up not just save files. So the image can be restored on any hard drive that restores the computer to its original state before it was imaged.
View 14 Replies View RelatedAfter completing the installation of Fedora-FEL edition, I cant boot from my hard disk. "No bootable device found " error appears.
I have one Windows XP & 2 Linux installation in my disk.
I tried to restore grub using "setup (...)" command.but same error repeats.
Even I cant restore Windows XP using "fxmbr" command in... recovery console .
But I can boot from that drive by "chainloader" command in grub. code...
Running above command in grub terminal boots my hard disk ("hd1" is my "unbootable disk")
I set my bios with AHCI, and plugged my external e-sata disk but i can't see it so far in dolphin . i also changed the policykit.conf to the following :
cat /etc/PolicyKit/PolicyKit.conf
<?xml version="1.0" encoding="UTF-8"?> <!-- -*- XML -*- -->
<!DOCTYPE pkconfig PUBLIC "-//freedesktop//DTD PolicyKit Configuration 1.0//EN"
"http://hal.freedesktop.org/releases/PolicyKit/1.0/config.dtd">
[code]....
How come the partition table is not read ?
This is a good way to backup my current system:
How to backup your system to restore your server incase the hard disk is damaged.
I am new to the Linux world and I am not sure if what I am trying to do is achievable or not. I am trying to make an image of my existing drives running Linux on a USB and I want to use the same image off the USB to clone more bootable hard drives. Something like what Ghost does in windows. The problem is using 'dd' the image is too big ( I have 1tb drives ) and then I am not sure how to convert these images back on to new drives so that they boot in the OS as well. i am not sure if there is a utility that would let you do that?
View 2 Replies View RelatedHow to boot an iso image from hard disk. I have created a linux live cd with remastersys. I want to test it. So I want to boot it from my hard disk.
View 3 Replies View RelatedAfter I burn the DVD image, I put the disc on the computer and boot. The installation screen appears, the acknowledgement screen appears, then the installation checks my system and gives me a yast window with an error about something related to URLs and repositories. I cannot continue with the installation.
I am 100% new at this and thought it would be as easy as installing ubuntu (which I installed on a laptop and works flawlessly).I am trying distros and opensuse is compatible with my video card right out of the box apparently, so that's why I chose it for my desktop.Do I need to copy the dvd image to the hard disk of the computer I want to install opensuse on, and use the dvd to boot as well?
I just invested nearly 12 hours configuring a CCTV system using CentOS 5.5 Server and Zoneminder. I have it setup just the way I want it. I would like to make a clone image of the drive just in case disaster strikes (lightning strike, failed hard disk, etc). In the Windows PC world, I use a program called Ghost to make a mirror image of a hard disk. I power the computer down, run Ghost to make a block level clone of the drive, then power it back up. Can I assume that will work with CentOS without problem?
In the computer now is a 320GB SATA drive. One partition on it is swap, and the other is ext3. There is no raid setup on the drive. I have an identical 320GB drive I could use and keep it in the computer unplugged from the power and not spinning. That way if anything ever happens, I can power down, move the power and data cable to the new drive and power it back up. Granted, I will lose any new config and database changes, but it will be a lot better than starting back at square 1 and reconfiguring the entire OS and software.
this is in the wrong section, but I wasn't sure where to put it. Since the background to my problem is kind of long winded I've split this post into two sections: Short version of problem
I have a PC that has two internal drives: one drive (drive A) is empty, and the other (drive B) has a copy of windows vista installed. At the moment the PC boots from drive A. I'd like to transfer everything from drive A to drive B, so that this new disk will boot and behave nicely and windows will still function.
Is there any easy way to do this in ubuntu? I'm guessing I can use something like dd, but will this copy the boot sector and will I have to mess around with the partition table? Long version of the problem
Today I built a new PC for my dad with two internal drives. He was previously using vista on a laptop which died a few days ago, and I'd like to install vista on one disk of the new PC, and ubuntu on the other disk.
He has a licensed copy of Vista for his laptop, but it came as a "system restore" disk, and so I can't install vista directly onto the new PC. I have an identical laptop to his, so I took out the drive from his laptop, put it in my laptop, and did a "system restore" from the disk that came with the laptop. I then took out the drive from my laptop, and put this inside the new PC. It boots up fine, and I installed all the necessary drivers and etc to make windows work.
Now instead of using a slow/small laptop drive inside the new PC, I'd like to be able to clone the data on laptop disk and this onto one of the bigger/faster internal drives of the new PC. How can I do this from ubuntu, so that the new drive will boot windows?
I'm fairly certain it can be done using dd, but how do I make sure the information in the boot sector (or partition table) is correct for the new drive? I'm asking this because when I put my laptop drive into the new PC initially, I had connected it as an external drive, and when I tried booting from this there was an error, something like "Invalid partition table" (I think). I figured that when I did a "system restore" on my laptop, the drive was the only drive available, so this would be HDA, or SDA in the boot record of that disk. But when I added it to a system where other drives were available, it was no longer at that same location, so the boot loader couldn't find the data it was looking for to load the system.
I want to delete the KVM created hard disk image file, so I would like to know where it is located .
View 6 Replies View RelatedI'm trying to install debian-6.0.2.1 from hard diskand it can't find my iso image wich is on the slackware partition.i downloaded initrd.gz an vmlinuz,added some lines to lilo.conf so that i can boot but then when it searches for the iso image doesn't find it .
View 6 Replies View RelatedI have a dvd I want to boot from, on a certain laptop. The problem is this:
DVD will NOT boot in laptop [1] with this DVD.
DVD WILL boot ok in laptop [2] with this DVD.
- Conclusion, DVD is ok.
* laptop [1] and laptop [2] boots other media in the cd/dvd drive ok.
I can see all files on DVD in both laptops. As a workaround I copied the DVD image off the DVD drive to internal hard disk with following command and the result was as follows:
- result of dd command
# dd if=/dev/sr0 of=/dev/sda4
6298816+0 records in
6298816+0 records out
3224993792 bytes (3.2 GB) copied, 473.18 s, 6.8 MB/s
How do I make that partition [/dev/sda4] bootable ?
I am looking for an Open Source software making it possible to make a disk image of an Ubuntu installation as well as a Windows XP installation.I have checked out Clonezilla which almost solved the problem. However, the disk to which you restore needs to be the same size or bigger. I want to restore the whole thingo a smaller disk than the original.I am considering getting myself an SSD disk which will be considerably smaller than the 160 gb disk I have right now. I need it to work for Windows as well. Unfortunately I can't get rid of Windows quite yet I often participate in webinars on GotoWebinar and they do not support Linux ...
View 9 Replies View RelatedI would like to build a bootable system image on an attached hard disk on a running CentOS machine.The hard disk would be moved to a headless server, where only SSH access would be available. It seems that all the documented install methods assume that the installation runs on the taget machine. In this case, I would like to create a bootable system image of CentOS on a running host system. The new install mage would generally have a newer version of CentOS than the running host system where the image is created. Also, I would prefer
to do a text-based install.
The reason for all this is that I have network access to several remote machines. I can ask disks to be moved between machines, but I have no physical access. In order to do software testing, I would like to have several system disks with different installed CentOS versions. It would be easer if I could build the system disks on one single machine. The hardware an all machines is very nearly identical.
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedI want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
I'm trying to share a hard disk in my Ubuntu machine with the rest of my network (Windows machines) using Samba. I can share files and folders on the file system drive just fine, but whenever I try it on the seperate disk the other machines can see the share but they can't access it.
The hard disk consistently gets mounted in /media/4050E5EB50E5E81C but well I can't share anything in the way I normally would.
Does anyone know what to do? I've spent hours on this and it's getting quite frustrating.
mount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies View RelatedI need little help on live disk creation and disk image backup.
Can I create live disk using my hard drive installation? If yes then, can I restore the fedora from the live disk to the hard drive. I mean to say that from that live disk can I install fedora again in my hard drive.
Second question is, if I create the disk image of my hard drive( including ntfs & FAT32 partition) , can I restore it in a blank drive. If so , then can os will be restored also?
I need to know how and what to use to format a USB external Hard disk with linux as i dont want anything that can be read with windows.
View 1 Replies View RelatedTo use squid i want to install linux in my 200 GB hard disk. I need guidance regarding to installation phase.A server which will be dedicated for squid proxy what things should I keep while installing my red hat linux operating system.I mean the partition sizes for swap ,root ,boot and any partion for squid cache should I need during making partitions ?
View 2 Replies View RelatedI'll be away from home for the following weeks (and perhaps months). I want to use the Internet with confidence, so I have setup an old computer with SSH and I'll be tunneling to that (from a netbook).I haven't remote-managed a computer for such a long time and I want to be sure that even if I do a mistake remotely, I can bring the computer back to a good known state.The home computer will reside inside my aunt's house and she knows very few about computers.
I've been thinking about burning a bootable DVD containing a tarball of a freshly configured Slackware. If I mess up, I can phone my aunt and tell her to simply put the DVD inside the drive and press ctrl-alt-del. The DVD boots, un-tars (the fresh Slackware), ejects the CD-tray, waits for her to press Enter, closes the tray, and finaly reboots to my good old known fresh Slackware.