Ubuntu Installation :: Belkin Usb Hub Not Working With 11.04?
Jul 15, 2011
I have a dell desktop using 9.04 version before when belkin 4 port usb hub was working with keyboard, mouse, printer, webcam connected on it. I upgraded system to 11.04 when again USB hub was working. Recently certain upgrades happened on my system and USB hub stopped working. If I connect mouse, keyboard directly to usb port they are working but not when connected with usb hub. Present kernel version is 2.6.38.10. Since USB ports are limited so i have to use mouse, keyboard, printer, webcam through usb hub.
View 1 Replies
ADVERTISEMENT
Mar 11, 2011
I'm looking at buying one of the above cards, and was wondering if anyone knew if they worked in master mode (e.g. as an access point). According to the Aircrack-ng site, they support packet injection and monitor mode. Is master mode support solely up to the driver used with the card, or does the card have to physically support it?
View 2 Replies
View Related
Mar 26, 2010
I have a belkin n wireless net card its model # f5d8053 v3 tring to get this card to work. have done some looking around and some of the places where i have looked they said DID work but are no longer working...the os on the computer i am trying to install this on is a 64 bit ubuntu
View 2 Replies
View Related
May 2, 2010
I've got an old IBM Thinkpad T41 that I just play around with Ubuntu on. The internal Wireless card is broken, so I bought a Belkin F5D8013 PCMCIA Wireless N card a while ago. It worked fine with Ubuntu 8.04-9.10, but it will not work with 10.04. It sees the networks just fine and will let me type in the network password, but it will not connect. Everything else in my house connects without a hitch, so I know it is Ubuntu causing the problem.
View 1 Replies
View Related
Jun 30, 2010
I have a Compaq AMD64 that has ubuntu 9.04 on one HD that works great. I've installed 10.04 on a separate HD and had problems installing it. I have 10.04 running now but I can't get my wireless card to work. During installation I skipped setting up the wireless network. Now when I boot into the 10.04 partition I cannot get the nm-applet to work. I can't get it onto the task bar and I don't see it anywhere else.
I checked to see what drivers are installed, and since I have no connection with that OS I can't update or DL drivers for it. I'm pretty sure that it is because I skipped setting it up during installation. What do I need to do to get the wireless working now? I checked other threads and none seem to pertain to my situation. Since I have to log into the 9.04 partition, I can't copy/paste outputs very easily.
View 3 Replies
View Related
Jan 3, 2011
i am complitly new in Ubuntu and the world of Linux in general, so i said to my self its better late then never, i installed the last one 10.10. but i am having trouble with my wifi usb adapter (BelkinF5D7050 v 1000), the same adapter works perfect under XP in the same PC. when i go to NM i dont see it in the list of network cards "i see just my two other normal network cards + loopback" and i have permanent small "x" on the icon of NM up in the task bar, even if check or uncheck "Enable Networking", it alwayes show a info bubble "you are now offline", here is the result of all the command line that can help getting better view on my problem
[Code]....
View 1 Replies
View Related
Sep 27, 2010
Last night I jumped into the linux world and finally installed Ubuntu in a dual boot system with XP on board as well (eventually I want to get rid of this). How can I get my wireless Belkin F5D8233-4 router working. I put the install disk in and it shows on the desktop but unable to execute - keep getting an error message. Getting frustrated...
View 6 Replies
View Related
Jan 19, 2010
I have just installed Ubuntu 9.10 alongside Windows 7 and it is not picking up my Belkin N wireless adapter?? So I went to go and download the Windows Wireless Drivers (ndiswrapper) software so I can install my adapter and the download center just says "Not available in the current data" and wont let me download it? Also I tried to download my nVidia drivers from software center and it said the same thing?
Never before have I had a problem with Ubuntu until now So can anyone point me in any directions as to how to get these installed???
View 5 Replies
View Related
Oct 23, 2010
I'm trying to get internet set up on my grandad's laptop (sony pcg-f590), which has a fairly old pcmcia belkin 54g wireless card. I've installed the relevant bcmwl5a.inf driver through ndiswrapper, and for a time wireless worked so I installed updates through update manager. however after restarting the network manager menu comes up with "wireless networks disconnected" and no list of networks (I know there are because my laptop works and his is sitting next to the router!). The light is on on the network card so I know the laptop is talking to it. Unplugging and replugging the card does nothing, and neither does restarting again.
View 1 Replies
View Related
May 2, 2011
Installed F14 on my daughters HP Pavilion a131On. I rebooted multiple times. Do I need to activate something? I'm new to all of this but read through many threads to do as much as I could myself. I used the GUI to load the rt3070 drivers rather than rpm. The GUI is easier I think and should be equivalent. Please let me know what else I need to do. Fedora has been great on my Lenovo but this usb wlan stuff has been a pain.
[Code]...
View 2 Replies
View Related
May 13, 2010
I tried getting a Belkin USB Wireless adapter:N150 to work in a fresh installation of 10.4 with no success. After reading several forum posts I tried both solutions with ndiswrapper and the XP driver and with the Ralink native driver with no luck.
Code:
lsusb
Bus 005 Device 008: ID 050d:935a Belkin Components
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
View 9 Replies
View Related
Jan 3, 2011
i have ubuntu 10.04 i believe and i cant connect to the intenret i guess its not detecting my wireless adapter. i cant try ethernet cord which prolly would work because i cant move pc to another room....is there any fix for this? i googled linux drivers but i cant find any...i do have the cd that came with the adapter.
View 1 Replies
View Related
Sep 29, 2010
I have a Belkin F5D6050 adapter, which (despite being only 11b) was working better than my 11n adapter on 11.1 [The 11n stopped working today after I ran an upgrade; I have got it working - in a fashion under 11.3 - see RTL819SU not working with ifup (needs ifup-dhcp first)] I can't connect to my AP. The significant output from dmesg appears to be:
Code:
[19991.327361] wlan1: authenticate with 1c:af:f7:26:01:bc (try 1)
[19991.524037] wlan1: authenticate with 1c:af:f7:26:01:bc (try 2)
[19991.724034] wlan1: authenticate with 1c:af:f7:26:01:bc (try 3)
[19991.924031] wlan1: authentication with 1c:af:f7:26:01:bc timed out
FYI the info from
[Code]...
View 2 Replies
View Related
Jul 18, 2009
I'm trying to set up a new Dell machine with openSUSE 11.1 and KDE 4. For the rest of my PCs I use a Belkin kvm that connects the mouse and keyboard into PS/2 ports and it works. However, the new Dell doesn't have PS/2 ports and I can't get the machine to detect the mouse and keyboard (at all) unless I plug them in directly.
I'm using a Belkin four-port kvm, model number F1DJ104P. Does anyone know of a driver I could download to my Dell PC that would detect the devices via the kvm? The Belkin web site seems to be in pieces and is absolutely no use.
Alternatively, since I'm not particularly attached to the kvm, can anyone suggest a kvm switch that I could buy instead? It would have to have a minimum of four ports and be able to handle both Windows and Linux (all flavours with both OSs) machines, with both usb and PS/2 ports for mouse and keyboard. If it could handle audio, then that would be an improvement on what I've got already.
View 4 Replies
View Related
Jun 27, 2011
very new to using fedora and trying to install my belkin wireless adaptor is not working at all. It reads the disk but says there is an error.it still works fine on windows so i'm not sure how to fix this.
View 1 Replies
View Related
May 23, 2010
Belkin does not have a driver for linux, need a driver.
View 6 Replies
View Related
Jul 26, 2010
im downloading ubuntu for m desktop...my question is how do i listin to my music..and can i use m belkin usb wireless adapter??? does ubuntu have drivers for such things?
View 4 Replies
View Related
May 15, 2011
I want to use a Belkin fsd8063 v6 with 10.10 how do i make it work .
View 9 Replies
View Related
Jun 23, 2010
I have a new belkin N1 router which I tested in somebody else's flat. It worked fine. When I got home I reset it by pushing a paperclip in the hole for 10+ seconds to erase this flat's internet connection settings (username and password and stuff). After this I plugged it the computer and tried to connect to it (wired connection) using 192.168.2.1 (this is correct for that router, it is not 192.168.0.1). But the browser says it is offline and cannot connect. The lights of the router cycle, the "modem router" light blinks continuously and the others briefly come on and go off again, every few seconds. I tried resetting it again, several times, leaving it off for a few hours, leaving it on for a few hours, etc.
View 2 Replies
View Related
Sep 14, 2010
I've had a quick Google around, but everything I find seems to be a bit out of date (from over 2 years ago). I'm running Ubuntu 10.04 and have tried to use a Belkin N USB Wireless adapter but it doesn't recognise it, nor can I find any drivers. Is there a way to get the laptop to recognise the Belkin adapter?
View 9 Replies
View Related
Oct 30, 2010
I am new to Linux and use Xubuntu 10.10, but the usb wireless adapter won't run. I followed the instructions on [URL], but nothing happens.
View 9 Replies
View Related
Nov 4, 2010
It worked in 10.04 using ndiswrapper, but the connection was very weak (In Windows, it works perfectly). I blame ndiswrapper and the windows driver for the connection issues.In 10.10 x64, using ndiswrapper does not work. It says hardware present, but iwconfig shows no wlan0 adapter. I downloaded the driver from RealTek's website (rtl8192su) and compiled it. It gave a lot of warnings about integers being out of range, but I ignored them and went on anyway. If you want the exact warnings, I can put them on a pastebin and post the link tonight when I get home from work.
After doing a make install, I plugged in my adapter. As soon as it kicked on, the light on the adapter would blink and the screen would go black with a lone cursor in the top left corner of the screen. The drivers are obviously suspect, since I can make uninstall, plug in the adapter, and continue on with no network.Has anyone gotten this adapter/other adapters with the rtl8192su firmware working in 10.10 using a stock x64 install? It has to be stock or using packages available on the disk since without using the adapter, I have no internet.Maybe I'll try the drivers on 10.04 and see if they're just not compatible with 10.10.
View 1 Replies
View Related
Dec 8, 2010
I am having trouble with getting my desktop to connect to my wireless router.
Here are the specs I currently have:
WIreless Brand: Belkin
Wireless Model: F5D8055 v1
Wireless Chipset: 050d:825a
Ubuntu Version: 10.04.01 LTS
Machine Brand: PC
Kernal Architecture: 2.6.32-24-generic x86_64
I really am having a problem. I can see wireless networks, but when i try to connect to one, even unsecured, the icon just keeps acting like it is searching for a wifi spot. Im really confused.
View 9 Replies
View Related
Mar 5, 2011
I'm having a slight problem with my new wireless card that I purchased. I installed the firmware and the like and it does work, my computer recognizes it and I can search through my available networks, only thing is though.I cannot connect to any of them. I'm fairly sure it's a problem with it obtaining an ip address though.because it does connect briefly and I read the status and it shows no IP address, but when I connect through wired internet all that information is available. I tried setting my network configuration to static and that didn't help at all. I'm only a week into Ubuntu so this is all still fairy confusing for me.
View 1 Replies
View Related
Jun 20, 2011
I have just installed 11.04 alongside windows vista. I have been trying to connect my router but it keeps saying disconnected from network. I have ran all of the troubleshooting tips in ubuntu its self and everthing seems in order. is there any settings i need to change on my router or in ubuntu's edit connections programe? I managed to connect to the router once to upgrade from 10.10 to the 11.04 but even before upgrading to 11.04 i had problems connecting to the router.
View 6 Replies
View Related
Jul 27, 2011
I have a belkin n150 usb wireless adapter that doesn't seem to work. I have searched for a solution on this and other forums, but the advice is either too confusing/long for my noob brain, or applies to older versions and no longer works.
I am running ubuntu 11.04, the usb device shows up on lsusb so I know it's there, but I can't get it to work. I have installed ndiswrapper and put in the driver from the cd, didn't work. I downloaded the RT2870 linux drivers, tried sudo make and sudo make install and that didn't work (I probably didn't install correctly).
View 4 Replies
View Related
Jun 18, 2011
I joined this forum so I can say my experience with the crappy belkin N150 router. It appears you need to run the setup cd under windows to make the router 'see' the modem. Under linux as someone pointed out you can easily enter the router setup from a browser ( enter 192.168.2.1 ) and connect to the router only (wired or wireless connection) but not the internet. Does anyone have any idea what the windows setup is doing to connect the router to the modem and how to do it under linux in the browser?
View 9 Replies
View Related
Jan 25, 2010
I recently purchased a belkin f6d4050 usb adapter. install in on linux ubuntu 8.04
View 2 Replies
View Related
Feb 13, 2010
How do I get my ubuntu 9.04 computer to recognise the USB wireless stick and then connect to my wireless d_link router?
View 1 Replies
View Related
Feb 14, 2010
I've been having one hell of a time getting my old computer back up and running for my son. A year ago I had this computer running with Ubuntu despite it's connection to our local wireless with a Belkin N1 F5D8001. Now I've got the newest version of Ubuntu installed on his computer and I'm trying to go through the same steps that I went through in the past. I've managed to get the NetMW14x.inf file downloaded and I've used the new GUI for windows drivers to install the .inf but it's showing no Hardware loaded.
Also, in the past, there was at least recognition of the existence of the card if I did an ifconfig, it was just a matter of assigning a driver to it, etc. Now, if I do an ifconfig, I get the ethernet (disconnected) and lo (loopback). So it's as if the card's dead, but it isn't because I just wiped XP off it this morning. What the heck is going on with this thing? I could swear I've done everything I've read and everything I recalled doing in the past to make this work, but I'm mostly hosed by the fact that it's as if the system doesn't give a crap that the card is inserted at all.
View 1 Replies
View Related
