I've just install Ubuntu 10.04 on my machine and I have a problem with apache, when i try to browse localhost I get this error
Quote:
Forbidden
You don't have permission to access / on this server. Apache/2.2.14 (Ubuntu) Server at localhost Port 80
I now that is an old problem, but i didn't find a working solution on web.
I changed my motherboard battery last night, and now get "Read Error" on booting to Ubuntu, on dual boot system. This is the most frustrating thing in an otherwise great operating system. It is the second time I have encountered this issue (last time was a change of power supply). I fixed it last time after three days of re-loading Grub2 and playing around Grub 2 updates, etc. Fixed it eventually, but as usual, no idea of what eventuality fixed it. I think I found a web page buried deep in the 'net, which talked about device.map. Do you think I can find it again - not yet - day 2 searching for the answer... This is what the grub script tells us:
[Code]....
I have just installed Ubuntu 10.04LTS however when I attempt to boot the HDD I get the following error message
Read Error
Thats it nothing else, I am able to boot a USB installed version of Ubuntu 10.04LTS no proble. I can boot a Live CD of the same version no problem but when I installed it to the hard drive it just seems to fall over. I've tried adjusting the boot order, putting the HDD first and removing everything else but no joy. Im a linux n00b so no idea what to do next apart from go back to windows.
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg
Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
I downloaded the Ubuntu Server 10.04 64bit ISO and the universal USB installer, created a USB install disk and booted from it. I started the installation and right after keyboard setup I got an error saying Unable to read from CD-ROM, retry/abort. Looking at the alt-f4 log it was unable to find a file, fs-secondary.udeb I hit alt-f2 and cd'd to /cdrom/pool/main/l/linux (I think, this is all from memory) and found that file, almost. The file there was fs-secondaryblahblahblah.ude, no b on the end. I tried renaming it but the filesystem was mounted read-only.
So, cd back to /
Type mount and hit enter.
Take note of the cdrom entry, at the beginning of that line it will say /dev/? Mine was like /dev/svd0 or something like that. Remember whatever that is.
Then type umount /cdrom
Then type mount -t vfat /dev/????? (whatever your device was from earlier) /cdrom
That will mount the cdrom rw so you can rename the file to .udeb
Then press alt-F1 and press enter to retry and the installation will continue like normal.
I'm having real issues installing 10.04 to an SSD - I had one SSD fail, and have replaced it with a brand new one, but the 10.04 installer fails at beginning to write files to the disk with this error:
[Errno 30] Read-only file system: '/target/bin'.
Curiously:
* Windows XP will install to this SSD with no issues
* I can install 10.04 to a standard HDD with no errors.
What is happening that is stopping me from installing 10.04 to this drive? I am fairly sure that there is no issue with the SSD (I have two brand new, identical OCZ Vertex II 60gb drives which both encounter this error.)
I have tried partitioning the drive using gparted on another machine, leaving 5mb free at the start of the drive, and having a single partition for /, and a 1gb swap partition. "Round to cylinders" was unchecked. The partitioning was successful, and the drives can be mounted on my other machine, but the 10.04 installer encounters the same error.
I'm trying to install Kubuntu on an old Windows system. I am getting tons of errors such as:
I/O error
SQUASHFS error:unable to read page, block XXXXXX
SQUASHFS error: unable to read fragment cache block
It then reports that it's loading ACPI modules and starting the ACPI services, starting the system log daemon, doing Wacom setup, starting kernel log daemon.....and then it reads sb_bread failed reading block umptysquat.I have a feeling that this hard drive is toast. I can't get it to install Windoze or Linux. I can't even get a prompt so I can do a low-level format. Unfortunately, I'm not super savvy with Linux and don't know what to do next.
[code]...
Failed to read mirror file. it eventually shuts down saying "reverting to original state"?
I am running into a strange problem where kickstart installation fails with Error failed to read Rpm header, This happens when installation starts formatting of disk is also completed some of the rpms installed and then suddenly installer stalls with failed to read rpm header.
I have kept kickstart and install media on same host. I have changed the install media from http/nfs/ftp just to check is there any problem with the media but no luck.
However same installation with the same kickstart file works fine when both install media and ks file is kept on another linux host.
I am using RHEL 4 ,I do checked /var/log/messages it does not give any information on the failure and this started happening recently till that i was using the same server for my linux deployment.
Note: pxe setup, boot server ,install media and ks file all are in same server.
I am trying to install Ubuntu on a nvidia board which, based on the forums I have perused, is a FAKERaid chipset. Originally I tried to install according to https://help.ubuntu.com/community/FakeRaidHowto to no avail. I gave up and am resorting to breaking down my raid setup (thus losing my Windows XP installation) and using Linux's software raid (which seems to be the recommended method) with the Alternate CD install.
I went in to the bios and completely disabled my board's RAID function. I then followed the instructions here: https://help.ubuntu.com/community/In...n/SoftwareRAID , except it popped up with a window advising me "one or more serial ATA RAID configurations have been found. Do you wish to activate these RAID devices?" which that page didn't mention. I believe I selected "Yes". Setting up the partitions I made (from beginning of disk to end of disk) a RAID1 200MB /boot partition, a RAID0 / partition (90GB?), free space not set up in RAID (approx 20GB for each SATA drive to later install Windows on [if that's even possible]) & then the SWAP partition 2GB at the end of one of the disks (is it OK that this one wasn't in RAID?).
The installation completed, as far as I can tell, without a hitch. Except also of note: my network card doesn't work in the installer (gives an error message about unable to configure dhcp) so i'm not connected to the internet. Then I restart and the following appears: grub loading: error: biosdisk read error. Followed by what appears to be the Ubuntu loading splash (just a small white shape in the middle of the screen), and then:
[Code]....
This is what writes when I enter localhost in browser and press Enter.
It works!
This is the default web page for this server.
The web server software is running but no content has been added, yet.
http://localhost/~david/baby.php
Not Found
The requested URL /~david/baby.php was not found on this server.
Apache/2.2.19 (Debian) Server at localhost Port 80
So , I copied file directly into /var/www folder, entered /localhost/baby.php and get this :
Server error The website encountered an error while retrieving http://localhost/baby.php. It may be down for maintenance or configured incorrectly. Here are some suggestions: Reload this webpage later. HTTP Error 500 (Internal Server Error): An unexpected condition was encountered while the server was attempting to fulfill the request.
So , it's not 'bout path or server .. or about php file (I tried few). I don't know what to do
I've been trying to figure out what Apache directive is causing this:
Code:
[Thu Nov 11 15:00:00 2010] [info] [client x.x.x.x] Request header read timeout
My apache version is:
Apache/2.2.14 (Ubuntu)
I have google searched for this error but cannot seem to find any matches or information.
I am trying to set up an ampache server using apache as the webserver. The instructions have the following line as one of the requirments: Your webserver has read access to the /sql/ampache.sql file and the /config/ampache.cfg.php.dist file..I have essentially zero experience with apache, and I'm not sure how to grant read access to a file.
View 1 Replies View Relatedrunning 11.0,Linux 2.6.25.20-0.5-paeusing a 3ware 9500 adapter - raid 5 array with hot sparethe system is only 6 weeks old.several days ago, apache would stop responding. trying a restart gives:
/etc/init.d/apache2 start
/bin/mktemp: failed to create file via template `/tmp/apache2.nb6xHyzlga2e': Read-only file system
[code]....
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
I am trying to setup my webserver and I am trying to make a website to run under suexec but somehow I cannot start my apache it directly fails and SELinux is giving me errors and don't really know what to do with it, it is giving me some command to type but not sure if this will make my server less secure. The SELinux error is as follow:
Code:
Summary:
SELinux prevented httpd reading and writing access to http files.
Detailed Description:
SELinux prevented httpd reading and writing access to http files. Ordinarily httpd is allowed full access to all files labeled with http file context. This machine has a tightened security policy with the httpd_unified turned off, this requires explicit labeling of all files. If a file is a cgi script it needs to be labeled with httpd_TYPE_script_exec_t in order to be executed. If it is read-only content, it needs to be labeled httpd_TYPE_content_t, it is writable content. it needs to be labeled httpd_TYPE_script_rw_t or httpd_TYPE_script_ra_t. You can use the chcon command to change these contexts. Please refer to the man page "man httpd_selinux" or FAQ [URL] "TYPE" refers to one of "sys", "user" or "staff" or potentially other script types.
Allowing Access:
Changing the "httpd_unified" boolean to true will allow this access: "setsebool
-P httpd_unified=1"
Fix Command:
setsebool -P httpd_unified=1
I will write down how I did setup my server so maybe you can see a mistake I did. First I changed my Apache httpd.conf I added the following to it:
Code:
NameVirtualHost 192.168.1.2:80
<VirtualHost 192.168.1.2:80>
ServerName localhost
DocumentRoot /var/www/html
DirectoryIndex index.html index.html index.shtml index.php
</VirtualHost>
<VirtualHost 192.168.1.2:80>
SuexecUserGroup ulyaoth ulyaoth
ServerAdmin webmaster@ulyaoth.org
ServerName test.ulyaoth.org
DocumentRoot /var/www/ulyaoth/www/html
ErrorLog /var/www/ulyaoth/logs/error_log
CustomLog /var/www/ulyaoth/logs/access_log common
DirectoryIndex index.html index.htm index.shtml index.php
ScriptAlias /cgi-bin/ /var/www/ulyaoth/www/cgi-bin/
<Directory /var/www/ulyaoth/www/cgi-bin/>
AllowOverride none
Order allow,deny
Allow from all
Options +execCGI
AddHandler cgi-script .cgi .pl
</Directory>
</VirtualHost>
Then I created the username "ulyaoth" with the group "ulyaoth" as I specified with my suexec, then I created all the directories as specified in my httpd.conf and "chown ulyaoth:ulyaoth (dirname)" them to the right group and username.
I am using lucid. it works fine for some day & suddenly freezes .then on rebooting it shows "read error" . if tried to boot from live cd it just stuck on blinking cursor. but if i removed "battery cell" from motherboard & then rebooted after some time sometime I can boot again. Is this due to wrong bios configuration or it is related to dependency or broken packages or something else. due to same error I have 3 reinstallation in this week . I am using lucid for last 10 months without any problem but last months grub rescue error changed things dramatically. on boot it shows " S.M.R.T. Ultra D.M.A. mode capable but disabled "
View 1 Replies View RelatedHere's some drive info:
partition labels & uuid
Code:
Windows /dev/sdb3 (hd0,3) 5450F91950F90312
/ /dev/sdb1 (hd0,1) 72c730c7-1aa5-46cb-8957-d309de430502
/boot /dev/sdc1 (hd1,1) 3fe937cb-aa77-4516-a911-3da514d21aae
There's other partitions, but I don't think they're referenced in any of the boot files and my grub.cfg menu entries:
Code:
Ubuntu:
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
[Code].....
This problem originated when I moved XP from sdc to sdb using clonezilla. I installed Ubuntu after that, however, and I have since run update-grub, so the menu entries should reflect that move. Also, all drives are set to IDE in BIOS.
However, I can mount the windows partition in Ubuntu and read all the files fine.
I have a laptop set up for dual-boot with Ubuntu and Win7. I also have a shared partition which I mounted as the /home directory in Ubuntu. The problem occurred as I was upgrading Ubuntu from 10.10 to 11.04. In the middle of the install, my computer froze for some reason and ultimately I had to shut the computer off and restart. When I restarted the linux would freeze half-way through boot-up with a message saying that the drive was mounted. Before the message saying the drive is not mounted it gave the following error: Can not read 'etc/udev_rule.d/z80_user.rules'
When I boot up Win7 it is unable to mount the shared partition and says that the drive is not formatted. I am also unable to run the ubuntu recovery option from GRUB. It asks me to give the "root password for maintenance," but it won't accept my root password. Would the upgrade have wiped my partition??? Or am I just locked out somehow because it was in the process of changing config files?
I got this error message when installing Fedora 11 by an installlation DVD (download from [URL]) Unable to read group information from repositories. This is a problem with the generation of your install tree. This error message appeared after the step that the installer asked me to choose where to install boot loader and configure the GRUB boot menu. The error message came with two button: [Retry] and [Exit installer].
View 8 Replies View RelatedI don't know the format of these old floppie disks, ive tried
Code:
PC8-248suse:~ # file -s /dev/fd0
/dev/fd0: ERROR: cannot read `/dev/fd0' (Input/output error)
how i can go about reading this data?
I am trying to install debian 6.0.1a in an old COMPAQ 1255 (amd-k6, 160 MB ram, 4.3 Gbyte AT33.33 MB/s Cyl 6568 Heads 6 bytes per sector 512 HardDisk). I am using the netinstall CD_ROM , I just want the base system (the last option in the list you are presented) I got installed debian 5.0.8 , base package plus fluxbox plus a light browser plus a light pdfviewer, and I got really surprised what an useful system I got from such and old hardware.
With 6.0.1a everything goes well during the install process, the net is recognized, also the disk, formatting an partitions are created, apt-get configured, repositories contacted, etc. I only select base system (may be I am confused with the name, it is the last option in the list), and I select the install using the whole hard disk (i also tryed the install using a separated home partition but I had the same problem). I am installing the system in spanish, using latinamerican keyboard layout.
the installer then asks to take away the CD-ROM, I do, I reboot and then I got "GRUB Read Error Operating System not found". Just before the message, the machine search the floppy. If I press a key, I got the same behaviour, noise in the floppy, error message.
I can boot the CD_ROM in rescue mode, and I can select /dev/hda1 and get a console. i can do ls and cd and navigate the tree. It looks like everything is there, the /etc, the /home, all of the directories. if I do fdisk /dev/hda i got a warning because dos compatible mode is deprecated with option p of fdisk i got:
15 heads, 63 sectors/track 8944 cylinders. (different of the specifications?)
device boot Id system
/dev/hda1 * 83 Linux
[code].....
i can do less grub.cfg, and I got lot of information. I think this part could be relevant to the problem
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid
I am trying to dual boot Vista and F10 and I have 2 different 400GB hard drives to do it on. On the first HD, I have Vista installed but when I try to install F10 on the second, I get this error message:
Quote: Error: Unable to read group information from repositories. this is a problem with the generation of your install tree. I've looked it up and found some forums but none answer how to "fix" it (if it is indeed something that you fix).
OpenSUSE 11.3, openssl was just updated with YAST (to see if there is any fix available but not)
# openssl version
OpenSSL 1.0.0 29 Mar 2010
# openssl -genrsa -des3 -out ca.key 4096
[code]....
I'm doing a Kickstart install of Fedora 11 with a DVD ISO as the installation source and the ks.cfg file in the root folder of the DVD. The error message I get is: "Unable to read group information from repositories. This is a problem with the generation of your install tree."
View 3 Replies View RelatedI am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
I'm moving a few computers around and recently installed via USB drive 10.04LTS onto a machine (Dell Vostro 220 with 1TB hard drive) that previously had mythbuntu and Vista dual booting. I'm still dual booting to Vista.Since installing 10.04 I've been getting an error in the boot that drops me to a shell from grub. After working my way into the painfully slow system. I get this with update-grub:
Code:
Generating grub.cfg ...
error: cannot read from `/dev/sda'.
error: cannot read from `/dev/sda'.
Found linux image: /boot/vmlinuz-2.6.32-28-generic
[code]....
I am unable to run perl script.When i am trying to run it.It shows following error in Apache error log- [Wed Jun 22 14:05:11 2011] [error] [client 172.16.237.128] Premature end of script headers: webrebase101.cgi
Below is the script which i am trying to run:
#!/usr/bin/perl
use Restrictionmap;
use Rebase;
use SeqFileIO;
[Code]...
I've had this happen twice. I get this after the grub screen (after I select which mode), it hangs, then says "error: can't read from file .... press any key to continue". I press a key, and it just sits there. I've tried two installs, it booted after the second, but once I activated the broadcom driver, it did it again. So I had to re-install, again.how to prevent that from failing again?
View 5 Replies View RelatedI've rebooted my system like 30 minutes ago...and all the sudden I get the error related the that program in ubuntu 8.04 that checks the disk after reboot for bugs an stuff like that. The error is caused by "read only system" mode. It can't write anything onto the HDD. I can't even change /etc/fstab file with nano or anything else. Btw is server edition. I mean when I want to save the file (fstab) same damn thing read-only system how can I change that?
View 2 Replies View Related