Ubuntu Installation :: Cannot Read From CDROM Error During USB Install
Jun 6, 2010
I downloaded the Ubuntu Server 10.04 64bit ISO and the universal USB installer, created a USB install disk and booted from it. I started the installation and right after keyboard setup I got an error saying Unable to read from CD-ROM, retry/abort. Looking at the alt-f4 log it was unable to find a file, fs-secondary.udeb I hit alt-f2 and cd'd to /cdrom/pool/main/l/linux (I think, this is all from memory) and found that file, almost. The file there was fs-secondaryblahblahblah.ude, no b on the end. I tried renaming it but the filesystem was mounted read-only.
So, cd back to /
Type mount and hit enter.
Take note of the cdrom entry, at the beginning of that line it will say /dev/? Mine was like /dev/svd0 or something like that. Remember whatever that is.
Then type umount /cdrom
Then type mount -t vfat /dev/????? (whatever your device was from earlier) /cdrom
That will mount the cdrom rw so you can rename the file to .udeb
Then press alt-F1 and press enter to retry and the installation will continue like normal.
View 4 Replies
ADVERTISEMENT
Jul 16, 2010
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg
Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
View 1 Replies
View Related
Mar 16, 2010
I can NOT mount my CDROM. I see several under the /dev folder cdrom, cdrw, dvd, scd0, src, how do I kow which drive to mount? I would like to load KDE fom a slackware disk,
View 1 Replies
View Related
Feb 19, 2011
I have XP installed with a wubi installation of 10.04. My CDROM is shot so I'm using Unetbootin to install from XP to a new partition.
[URL]
During installation it stops with error message that a mount point could not be unmounted /cdrom.
View 7 Replies
View Related
Mar 19, 2010
I am running Karmic x64 on a HP laptop that has a cd/dvd burner. I have a r/w cd with files on it and I wish to add/remove files to it. After it mounts automatically on insertion, I unmount it and remount with:
sudo mount /dev/sr0 -t iso9660 -w /media/cdrom
(I tried assorted other hare-brained things also) but it always says that the filesystem is read only. Do I need to use a different device than sr0? Is it even possible under Ubuntu?
View 1 Replies
View Related
Aug 12, 2010
My fstab is basic,
Code:
/dev/cdrom /media/cdrom auto ro,user,exec 0 0
I've tried commenting out the line and mounting directly, and have also tried using
[code]...
View 3 Replies
View Related
Jul 30, 2010
I managed to boot from hard disk, everything works ok. But Gparted has a bug, it works in Live Hard Disk, but not when I click the install icon because it can't umount /cdrom. But I solved that by formatting ext4 and swap area from gnome-panel Live Hard Disk and only put mount point / after click on install.But problem stroked back: install is not possible because it wants to umount itself before installing, wich cannot be possible. I'm installing it in a new place /dev/sda5. Live Hard Disk is booting from /dev/sda3.
ubuntu@ubuntu:~$ df -h | grep sda
/dev/sda3 2.0G 726M 1.3G 36% /cdrom
/dev/sda1 43G 17G 26G 41% /media/Windows
[code]....
View 1 Replies
View Related
Sep 12, 2010
I accidentally deleted my mahjongg game from ubuntu 10.04.Now when iam trying to install it from software center or synaptic, half way through it's asking for ubuntu cd.Eventhough i insert the original ubuntu 10.04 cd,it's not taking it.it keeps asking for the cd.It is same whenever i try to install any more game from synaptic or software center.
View 2 Replies
View Related
Jul 11, 2010
I downloaded and burned the Fedora-13-x86_64-dvd iso to install on my shiny new box (MSI NF980-G65 MB, AMD Phenom II x4 945 CPU, 8GB Corsair DDR3 memory, generic ATAPI DVD drive, 2 500GB SATA drives, 2 1.5TB SATA drives). I boot from the DVD and and take the default install/upgrade option on the menu. I've tried with the default boot options and with about a dozen different options, all give the the same thing.
Looking console 3, shows the following:
ERROR loader: removing ddmode.conf failed
ERROR loader: got to setupCdrom without a CD device
It can't find the CD/DVD drive that it booted from. The install on console 1 is prompting for a driver to load. Do I need to download a driver for a generic ATAPI/IDE CD/DVD drive?
View 10 Replies
View Related
Jan 31, 2016
I am attempting to install debian for the first time on my pc that has no cdrom drive. I downloaded the Jessie CD image and wrote it to a 4GB stick, it didnt work. Then tried the netinstall image but face the same issue.
To write the usb stick I used unetbooting first, then tried win32diskimager and finally tried DD while stick was not mounted
Code: Select alldd if=debian.iso of=/dev/sdb BS=4MB; sync
Issue is still the same: I boot from the usb and after selecting language and keyboard it fails to detect cdrom drive (no drive at all in my pc). Same behavior using normal or expert mode.
Im also unable to manually specify the drive (it looks at /cdrom and I wanted to change it to the usb stick itself or mount usb to /cdrom but I cant find my stick in /dev)
View 14 Replies
View Related
Dec 2, 2010
I changed my motherboard battery last night, and now get "Read Error" on booting to Ubuntu, on dual boot system. This is the most frustrating thing in an otherwise great operating system. It is the second time I have encountered this issue (last time was a change of power supply). I fixed it last time after three days of re-loading Grub2 and playing around Grub 2 updates, etc. Fixed it eventually, but as usual, no idea of what eventuality fixed it. I think I found a web page buried deep in the 'net, which talked about device.map. Do you think I can find it again - not yet - day 2 searching for the answer... This is what the grub script tells us:
[Code]....
View 7 Replies
View Related
May 3, 2011
I'm running Fedora x86_64. I need to setup a virtual machine to do some work on ARM platform. Thus, I've installed QEMU.
Code:
qemu --version
QEMU emulator version 0.13.0 (qemu-kvm-0.13.0), Copyright (c) 2003-2008 Fabrice Bellard
Then, I have dowloaded an ISO image of Debian 6.0 armel.Following instructions on official wiki, I have first created an empty disk image,
Code:
qemu-img create -f qcow debian-armel.img 650M
then I have attempted to boot from ISO image;
Code:
qemu -m 512 -hda debian-armel.img -cdrom debian-6.0.1a-armel-CD-1.iso -boot d
Boot process hangs with the message:
Code:
Booting from cdrom...
639 medium detected
Boot failed: Could not read from CDROM (code 0004)
No bootable device
link refers to Fedora 12, but it seems still unresolved...
View 4 Replies
View Related
May 24, 2009
I am trying to dual boot Vista and F10 and I have 2 different 400GB hard drives to do it on. On the first HD, I have Vista installed but when I try to install F10 on the second, I get this error message:
Quote: Error: Unable to read group information from repositories. this is a problem with the generation of your install tree. I've looked it up and found some forums but none answer how to "fix" it (if it is indeed something that you fix).
View 10 Replies
View Related
May 7, 2011
I have had a dual boot on my system since first trying Ubuntu a few months ago.I had a few problems when i upgraded to 11.04 (mainly due to the new desktop Unity), but after some great help here, we had the old desktop running again.I have Windows running on my spare Computer in case i should need it for any reason, though can not think of one lol Now i am used to Ubuntu (from the using side, get lost in terminal etc so here i come if i need help) i decided i would totally commit my main computer to Ubuntu.I downloaded the latest iso from the Ubuntu site, and burnt it to CD, inserted in my main computer & rebooted. It goes past the first purple ubuntu page (hit a key to choose language & also get a selection Menu) then goes to black screen and i get:
BusyBox v1.17.1 (ubuntu 1:1.17.1-10ubuntu1) built-in shell (ash)Enter 'help' for a list of built-in commands.(initramfs) mount: mounting /dev/loop0 on //silesystem.squashfs failed: Input/output errorCan not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs(hope i typed that i correctly)I have burnt the iso image numerous times, using different disks, speed (from x4 - x52) and burning programs
View 2 Replies
View Related
Jun 19, 2009
I'm doing a Kickstart install of Fedora 11 with a DVD ISO as the installation source and the ks.cfg file in the root folder of the DVD. The error message I get is: "Unable to read group information from repositories. This is a problem with the generation of your install tree."
View 3 Replies
View Related
May 10, 2010
I have just installed Ubuntu 10.04LTS however when I attempt to boot the HDD I get the following error message
Read Error
Thats it nothing else, I am able to boot a USB installed version of Ubuntu 10.04LTS no proble. I can boot a Live CD of the same version no problem but when I installed it to the hard drive it just seems to fall over. I've tried adjusting the boot order, putting the HDD first and removing everything else but no joy. Im a linux n00b so no idea what to do next apart from go back to windows.
View 9 Replies
View Related
May 4, 2010
I've just install Ubuntu 10.04 on my machine and I have a problem with apache, when i try to browse localhost I get this error
Quote:
Forbidden
You don't have permission to access / on this server. Apache/2.2.14 (Ubuntu) Server at localhost Port 80
I now that is an old problem, but i didn't find a working solution on web.
View 2 Replies
View Related
Jan 13, 2010
to install rssowl visit this web site , theres a link to install the repo for ubuntu[URL]..i have had rssowl running for a few days now and today my pc locked up hard i had no choice but to hit the reset button
upon restart rssowl refused to start kept giving me an error that it could not starts cos it was trying to read past end of file lucky for me i back up my rss feed list every now and then i went to $ home/.rssowl2
and delete this directory fully now when restart rssowl it start up like a new install and ask for my *.opml file it loaded up and all good again
View 1 Replies
View Related
May 25, 2010
I have double boot (windows7 and Opensuse) on my laptop.
My problem is when try to login Opensuse says Read only file system.(While booting a lot of things FAILS(written red) because of Read only file system). So i can't login.
Cause of this problem is want to reach my Opensuse filesystem from windows7.I installed Ext2fsd software to windows7.After installed software can see my opensuse filesystem.But it looks empty from windows7.So uninstalled the software.
After that day try to login my Opensuse.While booting alot of thing fails to load it says "FAILED".and when entered my password after entering my username cant login it says ..... Read Only File System.
How can i make the filesystem Read/write permissions to my opensuse operating system.
I can't use any command beceause can't login. (I will try to boot with Opensuse Dvd)
View 9 Replies
View Related
Nov 28, 2010
I'm having real issues installing 10.04 to an SSD - I had one SSD fail, and have replaced it with a brand new one, but the 10.04 installer fails at beginning to write files to the disk with this error:
[Errno 30] Read-only file system: '/target/bin'.
Curiously:
* Windows XP will install to this SSD with no issues
* I can install 10.04 to a standard HDD with no errors.
What is happening that is stopping me from installing 10.04 to this drive? I am fairly sure that there is no issue with the SSD (I have two brand new, identical OCZ Vertex II 60gb drives which both encounter this error.)
I have tried partitioning the drive using gparted on another machine, leaving 5mb free at the start of the drive, and having a single partition for /, and a 1gb swap partition. "Round to cylinders" was unchecked. The partitioning was successful, and the drives can be mounted on my other machine, but the 10.04 installer encounters the same error.
View 1 Replies
View Related
Apr 8, 2011
I have multi-version Kernels on a Dual Boot WinXP / openSUSE 11,3 box. It's been a LONG time since I needed to boot to Win XP and now that I find that I can't get to it, I can not say for sure what I did to break it. Looking back, I suspect that the method I used for the recent removal of one of the Kernel versions may have been innappropiate. Rather than unchecking in versions/package groups I may have just removed the unwanted kernel in the package list. Not sure. I've tried dinking around with menu.lst and Yast Boot Loader to no success. I get errors depending on what I messed with. Didn't try to reinstall grub until I checked here for help with a fix.
Here's some info:
Code:
View 9 Replies
View Related
Apr 5, 2010
I'm trying to install Kubuntu on an old Windows system. I am getting tons of errors such as:
I/O error
SQUASHFS error:unable to read page, block XXXXXX
SQUASHFS error: unable to read fragment cache block
It then reports that it's loading ACPI modules and starting the ACPI services, starting the system log daemon, doing Wacom setup, starting kernel log daemon.....and then it reads sb_bread failed reading block umptysquat.I have a feeling that this hard drive is toast. I can't get it to install Windoze or Linux. I can't even get a prompt so I can do a low-level format. Unfortunately, I'm not super savvy with Linux and don't know what to do next.
View 2 Replies
View Related
Apr 22, 2010
[code]...
Failed to read mirror file. it eventually shuts down saying "reverting to original state"?
View 1 Replies
View Related
Feb 21, 2010
Formated new drive with ext3 on external drive on Suse 11.1 When upgraded to 11.2, drive was not connected... Could not get mounted after that... Set up another boot drive, could not get to mount. Found post with following:
>cryptsetup luksOpen /dev/sde1 restore
>mkdir /restore
>mount /dev/sde1 /restore
Error as follows: mount: unknown filesystem type 'crypto_LUKS' Have also got to another point where superblock was incorrect. I can use terminal, but am not a linux guru... Have looked at other posts under luks, but can not find a solution.
View 6 Replies
View Related
Dec 16, 2010
I am running into a strange problem where kickstart installation fails with Error failed to read Rpm header, This happens when installation starts formatting of disk is also completed some of the rpms installed and then suddenly installer stalls with failed to read rpm header.
I have kept kickstart and install media on same host. I have changed the install media from http/nfs/ftp just to check is there any problem with the media but no luck.
However same installation with the same kickstart file works fine when both install media and ks file is kept on another linux host.
I am using RHEL 4 ,I do checked /var/log/messages it does not give any information on the failure and this started happening recently till that i was using the same server for my linux deployment.
Note: pxe setup, boot server ,install media and ks file all are in same server.
View 2 Replies
View Related
Jun 7, 2011
I tried to install skype: apt-get install skype but I got the following error: Failed to fetch cdrom:[Debian GNU/Linux 6.0.1a _Squeeze_ - Official i386 DVD Binary-1 20110322-15:11]/pool/main/q/qt4-x11/libqtgui4_4.6.3-4_i386.deb Hash Sum mismatch
View 2 Replies
View Related
Jan 13, 2010
I am trying to install Ubuntu on a nvidia board which, based on the forums I have perused, is a FAKERaid chipset. Originally I tried to install according to https://help.ubuntu.com/community/FakeRaidHowto to no avail. I gave up and am resorting to breaking down my raid setup (thus losing my Windows XP installation) and using Linux's software raid (which seems to be the recommended method) with the Alternate CD install.
I went in to the bios and completely disabled my board's RAID function. I then followed the instructions here: https://help.ubuntu.com/community/In...n/SoftwareRAID , except it popped up with a window advising me "one or more serial ATA RAID configurations have been found. Do you wish to activate these RAID devices?" which that page didn't mention. I believe I selected "Yes". Setting up the partitions I made (from beginning of disk to end of disk) a RAID1 200MB /boot partition, a RAID0 / partition (90GB?), free space not set up in RAID (approx 20GB for each SATA drive to later install Windows on [if that's even possible]) & then the SWAP partition 2GB at the end of one of the disks (is it OK that this one wasn't in RAID?).
The installation completed, as far as I can tell, without a hitch. Except also of note: my network card doesn't work in the installer (gives an error message about unable to configure dhcp) so i'm not connected to the internet. Then I restart and the following appears: grub loading: error: biosdisk read error. Followed by what appears to be the Ubuntu loading splash (just a small white shape in the middle of the screen), and then:
[Code]....
View 9 Replies
View Related
Oct 28, 2010
[URL]..86.iso.torrent I must install/run this CD, for 32bit ubuntu 10.4 TO upgrade, PLEASE NOTE IS INSTALLED ALONG VISTA?
View 5 Replies
View Related
Jan 29, 2010
using comapq proliant 8500
tested
8.04LTS
9.10
none of them coud find cd rom (then hove the F it can even get till detection ???)
not in /dev/cdrom only cdrom i coud filnd using # ls / was ls /cdrom and it just not working too so what can i do ??
View 3 Replies
View Related
Sep 30, 2010
Wehn I enter the command mkdir /mnt/cdrom, I get the message "Cannot create: Permission Denied". How do I fix this?
View 2 Replies
View Related