I've been trying to figure out what Apache directive is causing this:
Code:
[Thu Nov 11 15:00:00 2010] [info] [client x.x.x.x] Request header read timeout
My apache version is:
Apache/2.2.14 (Ubuntu)
I have google searched for this error but cannot seem to find any matches or information.
I'm running Fedora Core 8 (fc8) and when i make ping to that server, sometimes i get time request timeout and i don't know why...
I have the CPU of this picture and the network device is integrated look my CPU
[url]
I am trying to rearrange header in apache but i have run into some problems. i was able to write some with mod_header but i cannot set some headers like last modified and content length. this is what i want to do,
Firstly we have a company that can only read our xml request if the headers are in a certain order and our application doesnt send the headers in that order.
This is how the headers should look like:
And this is how it is right now:
I have used the apache to unset and set most of the but i cannot get all of them to work.
When I boot, after startup and before I log on, an error icon appears. I click - it shows a summary of the material that normally rolls by on a unix startup. One item is checked. It says:
Code:
Enabling /etc/fstab swaps: swapon: /dev/mapping/vg_knox-lv_swap:
read swap header failed: invalid argument
I have 1 disk - it has 2 partitions - one an 83 type with a file system in it, holds the kernel, mounts at /boot.
The second partition is an 8e type contains a volume group logically split between lv_root and lv_swap and physically located on sda2. As I understand it, the system is having trouble processing the commands for lv_swap. I am tempted to mess with these commands, but don't have enough know how to do so and am short on the time required to learn enough to master this subject.
*Am trying to configure on machine ?MyServer.net? apache on port 8586. *Two applications run on same machine on different ports Jenkins on 8081 and Hudson on 8080.*Request coming to 8586 port should redirect to either 8080 or 8081 on one condition. *The request from client machine coming to MyServernet:8586 looks something like this ?MyServer.net/job/<JOBNAME>/build?token=TOKEN?.
Condition
If <JOBNAME> is ?naveen? apache should redirect to 8081.
If <JOBNAME> is not ?naveenn? apache should redirect to 8080.
[code]...
I'm having some basic doubt! Consider 5 virtual domains has configured under a same server. I mean 5 different domains under same IP. Eg. mydomain1.com and mydomain2.com have IP 208.27.1.89. So when web browser request for mydomain1.com name server return IP address 208.27.1.89. Then browser contact IP 208.27.1.89 on port 80. Here comes my question how does apache know that the browser is looking for mydomain1.com not mydomain2.com. How apache differentiate the request for it's virtual hosts? By the way, what is a virtualhost ?
View 1 Replies View RelatedHow does the read & write request from a command prompt go to usb & retrieve the file ? When a read request is given , I/O manger sends the request to file system manager (FSM) and from FSM to mass storage device drivver and from there to mass storage , is this right in Linux ?
View 1 Replies View RelatedI am running into a strange problem where kickstart installation fails with Error failed to read Rpm header, This happens when installation starts formatting of disk is also completed some of the rpms installed and then suddenly installer stalls with failed to read rpm header.
I have kept kickstart and install media on same host. I have changed the install media from http/nfs/ftp just to check is there any problem with the media but no luck.
However same installation with the same kickstart file works fine when both install media and ks file is kept on another linux host.
I am using RHEL 4 ,I do checked /var/log/messages it does not give any information on the failure and this started happening recently till that i was using the same server for my linux deployment.
Note: pxe setup, boot server ,install media and ks file all are in same server.
I installed fresh installation of F15 and I've allways used Evolution as my mailclient. There was in older Evolution versions option "Mark message as read in X secs" I set that to zero to read emails smoothly, now I have to wait after every message that it's got "as read" and that's really annoying especially if it's automatically sent message from server that I don't really have to "check" it just click it to get it as read. I've been gone thru all the settings of current Evolution in F15 and haven't found anymore that option. Maybe there's conf file somewhere that I can put that? That "Help" page for Evolution is kinda outdated.
View 3 Replies View Relatedmy server into the public internet and must have my webserver [2.2.9 (Debian)] act secure. But this does not look very easy [I am searching, reading and working on it already the whole day ]. I read the apache docs, but there is a lot of stuff, which is different in Debian [lenny, 5.0.6]. Apache ignores the host-header given by the browser: [URL] are all served, but should be blocked. I new new to apachy, but on my IIS this works as expected. All browsers act equal [so no browser header problem].I configured two VirtualHosts, an excerpt:
NameVirtualHost hugo:80
<VirtualHost hugo:80>
DocumentRoot /usr/share/doc
[code]....
The I go to my hosts file on any box, and add hugo's ip-address under the new name x. Then, x is served, although the host-header in apache Every user coming from the internet could make the same!
Anyone know what this signifies in the Apache logs files:
Code:
[Tue May 04 20:56:06 2010] [error] [client *******] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 20:56:06 2010] [error] [client *********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
where can i get socket.h header file? will copy pasting this header file in 'incl' directory allow me to use it in the my program?
View 1 Replies View RelatedI wanted to know how can I set a period of time to a tcp connection to wait for request or respond for tcp block read. which system call or function I can use? Does any body know a very simple quick and easy reference on web for socket programing that has lots of socket programing examples in it?
View 1 Replies View RelatedMy server gets ddos attacks. I dig into access logs and I saw that attacker ips doesn't have valid requests headers, like their browser application info or requested url info.I want to close those connections immediately, and if it's possible block those ips for a time period.Can I do that with Apache and iptables?I searched on the internet but couldn't find useful results. Probably couldn't search for the right words.
View 2 Replies View Relatedsimple bash code:
Code:
#!/bin/bash
trap "echo 'you got me'" SIGINT SIGTERM # to trap ctrl+c
echo "Press ctrl+c during 5 sec loop"
for ((i=0;i<5;i++)); do
[Code]...
How come code behaves normally and stops when ctrl+c signal is caught and resumes, but after I use at least one timeout read in the code it looks like, if signal is caught again it doesn't pause the execution but skips the loop. If you remove -t (timeout) option from the read, both loops look the same!
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies View Relatedhow to redirect all client http request to https request in squid
View 1 Replies View RelatedI've just install Ubuntu 10.04 on my machine and I have a problem with apache, when i try to browse localhost I get this error
Quote:
Forbidden
You don't have permission to access / on this server. Apache/2.2.14 (Ubuntu) Server at localhost Port 80
I now that is an old problem, but i didn't find a working solution on web.
This is what writes when I enter localhost in browser and press Enter.
It works!
This is the default web page for this server.
The web server software is running but no content has been added, yet.
http://localhost/~david/baby.php
Not Found
The requested URL /~david/baby.php was not found on this server.
Apache/2.2.19 (Debian) Server at localhost Port 80
So , I copied file directly into /var/www folder, entered /localhost/baby.php and get this :
Server error The website encountered an error while retrieving http://localhost/baby.php. It may be down for maintenance or configured incorrectly. Here are some suggestions: Reload this webpage later. HTTP Error 500 (Internal Server Error): An unexpected condition was encountered while the server was attempting to fulfill the request.
So , it's not 'bout path or server .. or about php file (I tried few). I don't know what to do
I am trying to set up an ampache server using apache as the webserver. The instructions have the following line as one of the requirments: Your webserver has read access to the /sql/ampache.sql file and the /config/ampache.cfg.php.dist file..I have essentially zero experience with apache, and I'm not sure how to grant read access to a file.
View 1 Replies View Relatedwhen I try to access any page even small html pages it stays like 3 seconds in HTTP request sent; waiting for response. state..even when I use Lynx locally on the server..bypassing any possible network issues..logs dont show a thing..the server itself is a high end server with nothing running on it apart from apache which is not serving anny clients now, firewall is disabled and hostnamelookups are set to OFF.
View 1 Replies View Relatedrunning 11.0,Linux 2.6.25.20-0.5-paeusing a 3ware 9500 adapter - raid 5 array with hot sparethe system is only 6 weeks old.several days ago, apache would stop responding. trying a restart gives:
/etc/init.d/apache2 start
/bin/mktemp: failed to create file via template `/tmp/apache2.nb6xHyzlga2e': Read-only file system
[code]....
I am trying to setup my webserver and I am trying to make a website to run under suexec but somehow I cannot start my apache it directly fails and SELinux is giving me errors and don't really know what to do with it, it is giving me some command to type but not sure if this will make my server less secure. The SELinux error is as follow:
Code:
Summary:
SELinux prevented httpd reading and writing access to http files.
Detailed Description:
SELinux prevented httpd reading and writing access to http files. Ordinarily httpd is allowed full access to all files labeled with http file context. This machine has a tightened security policy with the httpd_unified turned off, this requires explicit labeling of all files. If a file is a cgi script it needs to be labeled with httpd_TYPE_script_exec_t in order to be executed. If it is read-only content, it needs to be labeled httpd_TYPE_content_t, it is writable content. it needs to be labeled httpd_TYPE_script_rw_t or httpd_TYPE_script_ra_t. You can use the chcon command to change these contexts. Please refer to the man page "man httpd_selinux" or FAQ [URL] "TYPE" refers to one of "sys", "user" or "staff" or potentially other script types.
Allowing Access:
Changing the "httpd_unified" boolean to true will allow this access: "setsebool
-P httpd_unified=1"
Fix Command:
setsebool -P httpd_unified=1
I will write down how I did setup my server so maybe you can see a mistake I did. First I changed my Apache httpd.conf I added the following to it:
Code:
NameVirtualHost 192.168.1.2:80
<VirtualHost 192.168.1.2:80>
ServerName localhost
DocumentRoot /var/www/html
DirectoryIndex index.html index.html index.shtml index.php
</VirtualHost>
<VirtualHost 192.168.1.2:80>
SuexecUserGroup ulyaoth ulyaoth
ServerAdmin webmaster@ulyaoth.org
ServerName test.ulyaoth.org
DocumentRoot /var/www/ulyaoth/www/html
ErrorLog /var/www/ulyaoth/logs/error_log
CustomLog /var/www/ulyaoth/logs/access_log common
DirectoryIndex index.html index.htm index.shtml index.php
ScriptAlias /cgi-bin/ /var/www/ulyaoth/www/cgi-bin/
<Directory /var/www/ulyaoth/www/cgi-bin/>
AllowOverride none
Order allow,deny
Allow from all
Options +execCGI
AddHandler cgi-script .cgi .pl
</Directory>
</VirtualHost>
Then I created the username "ulyaoth" with the group "ulyaoth" as I specified with my suexec, then I created all the directories as specified in my httpd.conf and "chown ulyaoth:ulyaoth (dirname)" them to the right group and username.
I want my samba to keep my windows attributes exactly what the user setted in windows I mean if it has read only file in win box and copy it to samba share ,samba keep it read only and same for other attributes but it does not do it now with my configuration:Quote:
[global]
workgroup = DOMAIN
server string = File Server
[code]...
I use Ubuntu, and Google Chrome mostly. How can I kill these HTTP headers, so that my browser caches this data? I believe it is XHR. Here are the relevant HTTP response headers:Cache-Control:no-cache, no-store, must-revalidate Pragma:no-cache.I also have Firefox, is there a plugin or something I can use to not respect "no-cache"?
View 1 Replies View RelatedI'm trying to add a header to many .cpp files in a directory (or directory tree).
My attempt was:
Code:
If I put part of the command inside quotes the substitution occurs, but then I get other errors like:
Code:
cat:
No such file or directory
I could just write a small program to do it.
I'm trying to install vmware tools in mint.
All goes well until I get to this -
What is the location of the directory of C header files that match your running kernel? [usr/src/linux/include]
When installing the vmware tools it says to just hit enter and the default will be used.
Hitting enter just keeps giving me the error message- The path "usr/src/linux/include" is not an existing directory.
I have a web application that runs through thousands of IP addresses and checks if they're online. Basically, if a server uses more than 250ms to respond, it's considered offline in our case. It would be an enormous timesaver if we could get the ping command to give up after about 300 ms, instead of what seems to be the minimum value of the -W parameter, 1 second.
View 2 Replies View Relatedsend pings test for hours to my router 10.0.1.1 and the ping test is perfect, never fail. 8024 send packages, 8024 packages received.
Now but when make the same ping tests for hours to my linux CPU, i saw that sometimes the ping test say timeout Whan can i do? Can i edit the timeout value for in my linux cpu? what you think? This is making me crazy because me linux cpu is loosing packages..
Code:
[root@TornadoR3 ~]# ifconfig
eth1 Link encap:Ethernet HWaddr 00:08:02:F9:AB:FF[code].....
I am geting a bit confused regarding the autologin of a user , and in need of help desperately. Could anybody please help me with the below queries :
How can we set autologin for any normal user in RHEL5 ? Also, How can we then logout such a user later, as we can't logout such user normally ? How to set timeout for such autologin users ?