I'm trying to install ubuntu Linux on a Pentium 3 computer which does not support booting to the CD-ROM drives. What are my options on other ways to install? Could I either use a 3.5inch floppy disk to get it started or install on another computer and just switch the disk back over right before configuring all the hardware?
View 6 Replies
i just downloaded Ubuntu10.10,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
View 8 Replies View Relatedi just downloaded openSUSE 11.4,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
View 6 Replies View Relatedi'm currently using windows vista and want to boot opensuse11.4 from my usb drive but my BIOS doesn't support it. please explain steps to install it on vista hard-disk,i'm getting confused following steps posted on theris website
View 4 Replies View RelatedI'm trying to boot an SD card on a notebook that does not have BIOS support for booting from the SD slot. Using various how-to's I've figured out how to add additional SD card modules to the initrd.img file on a bootable USB drive such that I can boot Linux installed on the SD card.
However, best I can tell, it loads the kernel and initrd.img from the USB and everything else from the SD card. What I really want is to load the necessary SD modules from the USB and then chainload the SD card such that whatever kernel is on the SD card is loaded instead. Is it possible to chainload to another bootable device after the kernel (with the SD module additions) has already been loaded?
I've been trying to get lucid to work on my gateway netbook. The major problem I've seen is that it would overheat (to about 63 C or a little higher, and then the display would go crazy and crash. My BIOS doesn't support cpu scaling. Somewhere in a google search, someone mentioned the 2.6.34 kernel. I had no ideal what I was doing, and I installed this kernel. (could not install headers -- a dependency issue I didn't understand). Tried it, and it booted.
Saw some errors, like timer or something not found and something about a soft reset. However, it boots, and it works, and the temperature is much better (at least for the last 42 minutes: I've not been able to run it that long before). Are those errors likely to cause problems? Are there any issues I should be aware of using a non-standard kernel like this? I am dual booting with 9.10, which works well, and all my serious work is on the 9.10 partitions.
HID compliant mouse
Synaptics PS/2 Port touchPad
Generic PnP Monitor
Atheros AR5B95 Wireless Network Adapter
Realtek PCIe FE Family Controller
AMD Athlon(tm) Processor L110
Realtgek High Definition Audio
Microsoft iSCISI Initator
Gateway LT3103u
As I write, temp is still at 56, but I am getting some intermittent display problems. Should I give up on lucid?
Is there a way to install Linux over the network without support in the BIOS (PXE if I'm not mistaking)? Something like the USB thing (boot from CD for drivers and after that the USB). 10x!
View 1 Replies View RelatedI was wondering to restore on old laptop to working order. This laptop is an old early 2000's Sony Viao, which I found in the trash. Still powers on, and can boot the latest Ubuntu LiveCD. The issue is that it did not have a harddrive in it, and I really do not want to shell out money for a drive for a laptop this old, but would still like to bring it back into service as a thin client or general purpose web/email terminal. The BIOS does NOT have a USB boot option, and every tutorial I have seen requires that in order to boot Ubuntu from a USB stick (which is what I do have). What I am wondering is, is there any way to just keep the LiveCD in the drive and use that to boot the kernel, etc, and then have it look for the rest of the filesystem on the USB stick?
View 6 Replies View RelatedWell, after installing the 64-bit RTM release of Windows 7, I finally became too fed up to stand it anymore. My BIOS does not recognize more than 3 GBs of RAM and therefore even my 64-bit Operating Systems (Windows 7 and Fedora 11) can't see or use the extra gig. Is there any way to get another BIOS or to add the support to my existing BIOS?
Oh, before I forget, I am using an Acer Aspire 5630 incase the model is required.
I donwload the Ubuntu 10.04 *32bits ISO image, and i burned each image with diferent speeds. Then, i tried to install, appears the Language Selection screen, all good. then, the Localization screen, I select Colombia (I'm from Colombia), clic on forward and the mouse shows the "loading animation", but the PC doesn't do anything (I let it for 30 minutes). I tried with the 2 CD, but ever the same result. And in some times when I try to out and reboot appears an error, so I have to reboot manually (with a button ).
And other problem, is that my BIOS doesn't let me boot form USB, so I can't install form USB. The last opportunity, and tried to install it, upgrading from Ubuntu 9.10, but in the instalation it gave me some errors, and in the 80% (or something like that), appears a window asking me to install GRUB AND EVERYTHING FREEZES, so I had to rebbot manually, and reinstall Ubuntu 9.10.
I'm doing a fresh install of xubuntu 11.04 x86 32bit via the Alternative CD. My computer has two 2TB drives and I want to mirror the partitions for redundancy For the Linux partitions (ie root and swap) I'll be creating raid partitions on each drive and using software RAID 1 to create md partitions of type ext4 and swap.
For the GPT's bios boot partition, am I also meant to use software raid ? Ie create a raid partition on each drive and use software RAID 1 to create a md partition of type bios boot ? Or am I meant to not use raid partitions and just create a bios boot partition directly on each drive ? In this case, will xubuntu's install process and grub tools ensure that both partitions contain the relevant grub files or do I have to explicetly do somthing to ensure that ?
Is it possible that grub can load usb driver because BIOS of my computer is 10 or more years older. Currently in grub if I run
root (<press tab>
I get
fd0 hd0
meaning so far floppy & hard disk can be accessed. I am using ubuntu 8.04 .
I reinstalled XP to do a dualboot with 10.10 yesterday. All was fine. Today I went through and installed everything windows needed, and everything seemed fine. Then I upgraded the BIOS on my motherboard, and suddenly everything isn't fine. I can boot to Ubuntu just fine. But when I select Windows from the GRUB menu, it just sits there with a cursor on the screen now.
View 1 Replies View RelatedI recently started to build a new box based on this board: [URL] All is going well enough except for very poor sound, and before I go any further trying to sort it out,it seems smart to update the bios as I am 5 or so releases back. The readme with the bios flash utility/file says to use a win98 boot disk + bios/utility floppy but the bios file itself is much too big to fit on a floppy anyway so I haven't been able to create a floppy-emulating cd as most discussions seem to suggest doing. I'm sure I'm missing something, but there has to be a way to take a win98 boot disk image, plus 2 files and get that to either boot from cd or better yet usb drive.
View 5 Replies View RelatedI'm about to install the Smart Boot Manager rpm so that I will be able to boot from my usb. My bios doesn't support booting up from the usb port. Will this cause conflict with grub?I currently have Fedora 14 installed and about to install CentOS 5.5.
View 10 Replies View Relatedi am using an USB keyboard and mouse. This is awkward because I cannot select which OS to boot from, etc.Also, cannot access BIOS to potentially turn on the legacy USB function. We do not have a ps/2 keyboard, and believe me, I looked. I acquired a usb to ps/2 adaptor: Still no joy. Also, the keyboard doesn't work within the virtual Ubuntu, while it did when connected without the adaptor. Getting my hands on a ps/2 keyboard is not an option. To get into Ubuntu, I had to, within Windows, tell the computer that the Live CD was a bootable drive, so that it would be the first option over Windows, and therefore the automatic selection when I didn't (couldn't) make one.
[Code]...
This leads me into the Ubuntu 9.10 install, where I am told Ubuntu is already on the computer (half of the hard drive, with Windows XP on the 2nd half), and I can either install 9.10 beside it, or replace it. If I choose to replace it, 9.10 takes over the entire 40 GB. Part of the problem is that the partition that Ubuntu is apparently on is /dev/sda1, and Windows XP is /dev/sda2, but within the Palimpsest Disk Utility:
20 GB File System
NTFS File System
Partition 1 (HPFS/NTFS (0x07))
/dev/sda1
20 GB File Unrecognized
Unrecognized
Partition 2 (Linux (0x83))
/dev/sda2
So I'm worried that if I install 9.10 in /dev/sda1 like it wants me to, I'll be losing XP.
I have a new machine arriving tomorrow and plan on installing ubuntu 10.04 x64 and windows 7 professional. I've only ever had a single HDD before, but now I have 2 * 640GB drives.Does it matter what OS I install first?Will I have to change anything relating to the HDDs boot order in the BIOS?I only got 2 HDDs so in the event of needing to reinstall one of the OS's they're on completely different drives. Also, in the eventuality I need to reinstall one of the OSs is it simply a normal reinstall procedure, or because they're on two seperate drives will I need to do anything different?
View 7 Replies View Relateddebian 8 64bit
Should bios setting be eufi or legacy?
Should secure boot be enabled?
I recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies View RelatedI currently have a Windows XP OS which i want to dual-boot with Ubuntu Linux 10.10 . I put the disk in the drive and chose the option to install Linux through Windows. But it hangs in the middle. I am also unable to change my BIOS settings due to which i can"t change my boot preference. My first Boot is the HDD. I want to change it to CD-ROM. Any suggestion? I also have another PC where i can boot through the CD...I tried installing there by booting from the CD but i get this error message after seeing the purple Linux screen with the loading dots. "(Process:286):Glib warning**:getpwuid:failed due to unknown user id (0)
P.S.- I am not able to see any options while the boot is going on
do you have any suggestions how I can install Ubuntu netbook edition on an old Laptop (Fujitsu-Siemens Lifebook 2131) currently running Windows 2000 with all servicepacks (if I recall correctly it is SP5) without boot-support for USB-Stick/Media, CD-ROM, PXE/netboot; booting is only supported from builtin harddisk and from floppy-disk drive, which is definitely broken. (with working floppy disk drive all would be fine). I also installed WUBI, but the harddisk is only 4 GB, so I had to use the USB-Stick as the Ubuntu install partition and this is not supported by the Laptop as it cannot boot from it.
Has anybody an idea, is it viable to online-resize an NTFS-partition to create a small linux-partition for bootstrapping the install?? I do not want to, it's still useful, so when crashing the NTFS-filesystem is likely I prefer not to take this route and leave the laptop with Win2k installed.
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies View RelatedWell today I decided that I couldn't wait for the offical release of 10.04 LTS, so I upgraded from 9.10 to 10.04 LTS Beta 2. After realizing that many problems had come with that update, I decided to just format my Ubuntu partition and reinstall it. Somehow my GRUB stopped working from when I formatted Ubuntu, so I whipped out the old Toshiba recovery disk for Windows Vista 32bit. After many attempts to have the recovery portion of the disk fix all of my problems and seeing no results, I decided that reinstalling Ubuntu (and GRUB) might make everything all better. Well it didn't. Grub shows my Windows partition but fails to boot it. After selecting it, it goes to a blank screen and stops responding. And to add to all of my problems, my BIOS has changed slightly. It no longer shows/or responds to F2 or F12 when I tried to give another try at that Toshiba recovery disk. That kinda sucks since I can't choose what to boot. Please help me!! I really don't want to have to format my entire hard drive and try to install Windows Vista again (Not that Vista is anything anyone should love) I have many expensive programs that can only be activated a certain amount of times. I don't even think that I could reinstall Vista since my BIOS won't let me boot the CD/DVD drive.
View 7 Replies View RelatedI have installed Ubuntu 10.10 Minimal on a 2GB USB using CLI and it is working very well after adding a few applications. But this USB will be used only on machines other than my own - likely with Windows as the only OS. And it is not comfortable for me to go into the BIOS of a strange machine to change the order of booting and afterwards go back to reset the order , especially with the owner looking on, obviously worried, and wandering whether his machine will still be working!
So my question: Is there any way to boot from a USB without having to go into the BIOS? code...
im on an old (8 years?) hp that doesnt support booting from usb. will a bios upgrade change that?
View 1 Replies View RelatedI understand this is not directly an ubuntu issue, but this arose as I was trying to install ubuntu, so I'm hoping some kind souls on here would be good enough to help anyway.
I've in the past installed ubuntu on to my PC using a CD, but this time I thought I'd try creating a USB startup disk.
I was required to set up the BIOS to change the boot order so I can boot from the USB flash drive.
The problems arose when I pushed the 'DEL' key (the correct key for my motherboard) to access the BIOS setup. When doing this the computer completely froze and would not progress any further to boot. It would still boot normally from the HDD provided I didn't try to enter the BIOS.
Looking on the internet for a solution I tried using the motherboard jumper to reset the CMOS. Now I can't boot up the computer at all. I get a message saying 'CMOS checksum error - Defaults loaded' then it asks me to press F1 to continue. I try this, but nothing happens. Clearing the CMOS has made things worse as now I can't get the computer to boot at all.
Have I killed my motherboard somehow? I've tried using a different keyboard (one USB and the other a USB keyboard but with an adaptor to connect it to the P/S2 port).
On further investigation any key press from the keyboard is enough to freeze the computer at whatever point.
My motherboard is an WinFast NF4SK8AA with AMD Athlon processor and 4Gb of mem.
i have ubuntu 10.04 server on a usb (it is an .img file) , and i.m trying to install it on an ancient machine (64mb of ram to be exact), and it has no usb option in the bios menu.
View 8 Replies View RelatedI have a 7 port USB hub, and have more than 2 usb storage devices, but in BIOS it only allows me to run off of e:/ f:/ and h:/ (h:/ is my built-in card reader) I want to be able to add new boot options, or at least 1 more for G:/, is this possible?
View 3 Replies View RelatedI have a recent ACER laptop that I used to use with Ubuntu only, but Ubuntu has crashed and won't boot anymore. I tried booting it via the live CD to try and recover my files before re-installing everything, but the CD won't run automatically.
View 3 Replies View RelatedMy laptop is windows xp pro, I need to install ubuntu, so I kept Ubuntu CD into my lap and restart, again it shows windows xp, some body told "BIOS is not set to boot from CD or DVD drive".
View 2 Replies View Related
