I am running Suse 11.1 on a netbook that I would like to free up for work. Since I would like to keep the existing setup on the new machine, I was wondering if there was a process for copying an exisiting installation to new hardware. This will be a desktop system ( Cheapie PIV most likely )
View 6 Replies
i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
Caution to all using ati graphics download repository. I have been using SUSE 11.4 after an upgrade from 11.3 through zypper for months. I added ati graphics as a update repository. Software update installed two ati files. I did not notice their names.
Upon installation my graphics was acting funny so I uninstalled the two ati-files figuring I'd be back to where I was. Now I can only get into terminal window after reboot at both runlevel 3 and 5; no graphics at all. I keep getting message re: display 'null' I wish to return to original graphics configuration prior to ati downloads which, I believed used xorg drivers.
I believe I either need to revise xorg.conf file back to original which was overwritten by ati process or reinstall xorg/X11 related files. I have an ati radeon HD 3450 agp card. 32 bit SUSE w/11.4 installed and running. Anyone have a sample xorg.conf that might work or some other ideas of how to get back to where I was.
As a related question, if I do a fresh reinstall of SUSE 11.4 using dvd can I save my /home files and any /filesystem files that my special software created in root directories.
Im quite new to Linux so im trying to learn as i go along.
I currently have Redhat 5.2 installed on a server and this has been setup with Oracle 10g Applications installed and configured by the developers at my company.
I have now been asked to install Redhat 5.4 so we can move onto Oracle 11g.
The question i need help with is... Can i update my current Redhat 5.2 with Redhat 5.4 without losing my current setup and configurations?
I have had a search around and found a command called 'yum' but this looks like it is only used to install packages and security updates etc.
I need to set up a domain controller that can communicate with windows machines as well as be accessable by the domain name and allow me to log in to the domain from my windows machines. i do have the novells guide to compTIA linux+ book but i cant figure out what i need to do to set up this server in the way i described above.
View 4 Replies View Relatedasus K60IJ intel 4400 dual-core 4gb ram trying to setup suse 11.2 64bit as dual boot. works fine with win7 in dual boot and system boots great. been following forums to setup wireless. after doing all term commands, it see's both built in wireless (atheros ar9285) on the pci-e and the usb verizon broadband modem as (curitel brand modem). after checking kernal dmesg, it see's devices but looking at usr/sbin/iwconfig, it see's no eth0. checked at the asus website and see nothing on getting any kind of ethernet drivers.
View 7 Replies View RelatedI'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
I am running ubuntu 10.10 on a drive with 3 partitions. 1 windows and 2 ubuntu partitions.
The ubuntu that I am running right now is on a partition that is too small. I need to either expand it to include the other ubuntu partition or reinstall 10.10 and copy my existing partition to it. Can this be down?
I have this version working the way I like it and have tried 11.04 and am holding of for now. Still the fact remains that my working copy is on a partition that is really too small I only have 2 gig free space on a drive that is a 500gig.
I'm trying to copy some files via terminal because i had some issues with nautilus crashing in the middle of the operation. So how can i copy files recursively while skipping existing ones?
View 7 Replies View RelatedDue to a problem I had with a 10.10 upgrade [URL] and the need to access data on the pc I upgraded, I downloaded the live CD and installed on the same pc. Now I have two versions of 10.10 on the same pc but in different partitions. Is there any way I can copy my settings from the partition that is not working (the upgraded one) to the one that is working?
View 1 Replies View RelatedOn my Desktop I am experiencing a very weird behavior. First of all, I would like to mention that I am posting from the very same machine...just under Windows (which tends me to roll our hardware issues).
Next, a short history I installed 11.2 on my machine when it came out last year. I upgraded my hardware (new mainboard, cpu, ...) without reinstalling. Everything went fine I upgraded to KDE 4.4...still everything ok I did a system upgrade to 11.3 final using zypper And there it starts. After the upgrade, the first boot didnt work as expected (the system just hang). So I just did a restart and 11.3 was up and running. Now, since last week, I cannot boot my system at all. The screen just shows me the boot-splash but the progress bar isnt moving a thing. So I started with the option splash=verbose which did not show me a single line of output. The system just hangs right after the GRUB selection occured. So I decided to download 11.3, burn it to a disc and reinstall it. Well...this doesnt work either At least it shows me some lines of output, which look fine, but some lines after starting KDM the screen goes black and thats it. The only way I got something was when I started the installation in Textmode. I was able to log in but I dont know what to do then. I ran yast2 but it didnt look like I could install the system that way.It would be nice to get it running with my home-partition still in place.
I'm having some (well, a lot actually) of problems trying to get OpenSUSE 11.2 installed on my home PC. I am attempting to set up a dual boot configuration with Windows 7 installed on an bios Nvidia RAID 0.I was able to shrink the partition in Windows, and rebooted onto the net install for OpenSUSE (the MD5 validated DVD install failed multiple burns with "Repository not found"). I get into the graphical installer portion with no problems off the net install CD. However, the installer is not recognizing that there is an existing RAID 0. It lists the 2 SATA disks in the RAID separately. I can click on SDA1, and both SDB and SDB1 and it shows the disks, but does not recognize any existing partitions. If I click on SDA I get an immediate segfault in YaST and drop back to the text mode installer menu. It is loading the nv_sata module just fine.
From forum searches and google it seems that this is not usually a problem. My motherboard is a Gigabyte GA-M57SLI-S4 with the Nvidia Nforce 570 chipset running an AMD X2 64 3800+. Removing the stripeset and redoing it as Linux software RAID is not an option, I do not have enough space for a total backup/restore. Anything I do has to be nondestructive to the existing Windows installation.I really want to have a linux installation but between the DVD installer failing and now this issue I am about ready to give up on it.
In the near future I will be obliged to change my computer. Currently, my system is OpenSuse 11.2 with KDE 4.5.3 on a dual-boot (with WinVista) laptop. I plan to have the new machine again be dual-boot (Win7).
First question: Is there a way to "describe" the current system in a way that, after the initial partitioning and probably a basic installation of OpenSuse 11.2, makes it easy to reproduce the current OpenSuse 11.2 installation (i.e., installed packages, profiles; more?) on the new machine? This would reduce manual work to copying some system files (e.g., /etc/csh.cshrc and similar) and of course /home/username etc.
Second question: Same as first, but this time with a change to OpenSuse 11.3 or the soon to come OpenSuse 11.4. A potential initial installation of OpenSuse 11.2 would be possible.
As every time when a new OpenSuse Version arrives, I tried to install 11.4 (I have 11.2 ans 11.3 on separate partitions, + a Windows 7 that already was there when I bought my computer). Previous versions always recognized existing installations and added them to the Grub list, 11.4 doesen't... it merely recognizes the Windows. This is blocking me from testing it before adopting, as I always do, as I don't know how to add these entries manually; I'm too afraid not to be able to add the entries once installed, and not being able to use my older versions in case I have troubles. What went wrong in this release that developers forgot this important part? How I could manually add my entries for 11.2 and 11.3?
View 6 Replies View RelatedI have a Ubuntu server with encrypted LVM2 (logical volumes - /, /var,/tmp,/home etc.). I need to migrate this to an OpenSUSE 11.2 server (cannot use a later version due to the availability of a binary-only module - that is just the way it is). When I fire up the installer, I cannot seem to find an option to mount the encrypted disk (/dev/sda) which has the LVM2 structure. I do not want to lose /home (logical LVM2 volume), so a clean blank slate install is not an option.
View 2 Replies View Relatedi tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
What just happened was that I was experiencing some serious blue screen errors in Windows all of a sudden, so I loaded up my recovery partition for windows, and ran the "Restore complete system function". At some point, it had to restart, and I got the BIOS error "Unable to detect operating system". Eventually I got openSUSE to work again by reinstalling it using my DVD. However, now, whenever I load my windows partition, I get a windows error that says it cannot configure Windows on my hardware! The furthest it gets is a blue Windows screen that says "Please wait while Windows continues to configure your hardware."
My windows version is Vista, and I use openSUSE 11.3 as my primary partition. My question is this: How can I re-install Windows onto my partition? I have a recovery partition setup still, but I'm afraid that the Restore Complete System function will mess with my linux partitions again!
All I want Windows for is to play WoW! Running WoW through Wine is fail on my laptop for some reason, its far too slow and problematic. Please help me... some Linux forums just trashed me for using Windows at all, but its my only option available for my particular spec of computer to play this game, so that type of advice doesn't help me much. Feasible alternatives to a Windows partition would be nice, but Wine clearly doesn't work for me like I desire.
Howto start an already installed Debian Lenny using setup CD/DVD, for example if GRUB won't to start it?
View 8 Replies View RelatedI have an existing OpenSuse 11.3 (64 bit) box serving a couple of websites. I would like to enable Xen. Question - If I install Xen through Yast, will my existing configurations be reset and will I loose my existing data? Does Xen have to be installed on a clean system?
View 3 Replies View RelatedHaving read several threads and received excellent previous advice there are just a couple of points I want to check please before proceeding on laptop. I want to upgrade to 11.4 from 11.2. My disk setup is as follows:-
Disk /dev/sda: 120.0 GB, 120034123776 bytes
240 heads, 63 sectors/track, 15505 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x462d462c
[Code]..
If I select existing /home root and swap partitions, format root but prevent formatting of /home and use a different user ID I believe that will leave my existing data intact and will allow me to trial new os. Is this correct approach? If all goes well and when I have new system working correctly, what is best way make old user id date accessible. Can I simply create my old id on new system and will that allow me to access data when I log on with that id?
Second question; at present I have the ability to boot to openSUSE, OS/2 and windoze. (It used to be done entirely by Boot Manager but during my last Linux installation I messed this up a bit so now machine boots to grub and this offers all three operating systems but chain loads Boot Manager if I select OS/2)
When I do the new installation what should I select to retain this setup so that I still have access to windoze and OS/2 but when selecting linux have new 11.4 system run.
I am working on setting up some networking connections here. [URL]. Depending on your router make and model. You can disable the dhcp server on the router if you go to advanced setup and in the dhcp option You should find two radio buttons off and on click off and you will disable the dhcp server on the router refer to your router documentations. I do not wish to disable the DHCP on my router (2wire). I have fixed the router so it assigns static IP addresses - by following the Management and Console Diagnostic" portion on this page: [URL]. There are 7 machines getting IP addresses from the 2wire router. Of the 7, I have configured 4 to have static IP addresses allocated to them by the router.
For example, the domain here is : 2wire.gateway.net
If I have a host named "zazu", and I ping zazu.2wire.gateway.net, I get the right IP address.
I am working with a product (ZIMBRA) that
-> requires for the host to "have MX records".
-> that you get a FQDN when typing "hostname"
-> that you get a FQDN when typing "hostname -f"
Basically, the way it is supposed to be set up is:
ZIMBRA (internal) <----> Kerio Mail Server (Windows) <---> email from the outside world
So, in a sense, the Kerio Mail Server is to forward mail received from the outside world to ZIMBRA and ZIMBRA is to send mail to the Kerio Mail Server to send it to the outside world. From what I see at these links: [URL] And [URL]. You have to set up some kind of DNS server? Why? Don't both the DHCP server and DNS server serve the same thing? How can I incorporate a DNS server into my setup when the 2wire (with DHCP) is working just fine?
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedI have recently been given the task of setting up some thirty odd netbooks with F10 and i was wondering if there is a way to generate a kickstart file from the first netbook (my one lol ) that i have setup to our needs so as to use it to create the same install on the rest of the netbooks. i had thought that i could use the anaconda-ks.cfg file in root's home dir but it is not at all representative of the custom package list i chose during the install.
View 8 Replies View RelatedI am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedI have Win XP installed on one hard disk drive (HDD1) and Ubuntu 9.10 installed on another hard disk drive (HDD2). Win XP was installed first then Unbuntu 9.10 which set up a dual boot menu. Win XP will no longer boot because I changed the BIOS setting from IDE to AHCI. The problem this causes is described at [URL]. The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled. I have read that Win 7 supports AHCI "out of the box" so instead of re-installing Win XP I want to install Win 7 to replace it. I would like to know in advance what installing Win 7 will do to the dual boot menu?
View 3 Replies View RelatedCurrently I am working on one project in which I am transferring existing setup to Open Source platform. I am having brand new IBM server with two NIC card and want to setup Firewall. I am searching for good solution which suits to me. Which firewall system I should go for? I am thinking of IPCop.
1) Firewall should support OpenVPN
2) Easy to manage for Resident technician
3) Should be block streaming, facebook and others sites.
I have a Centos 5.6 Linux Server configured as Router with NAT for my LAN. There are currently 2 NIC's on my server. One is connected to WAN , a PPOE connection (eth0) and eth1 is connected to a switch which supports my LAN. I have enabled NAT and configured iptables on my server and I am able to access internet from LAN and everything is working fine.I have a Belkin F5D8233-4v3 Wireless router and I need to configure wireless on my network so that I can access internet from my Laptop. The issue is that I have only 2 NIC's on my server, one Gigabit NIC integrated with my motherboard and another NIC which I am currently using for WAN access and LAN. I need to setup the Belkin as an wireless Access Point.
Can I connect my Belkin to my switch and set it up as a Wireless Access Point?? I have read about setup using 3 Nic's.Any ideas on how to configure my Belkin as Wireless Access Point with my existing setup? Is Belkin F5D8233-4v3 supported on Linux.
I have a cd of new fonts that I would like to install into the fonts folder.
How do I copy over the contents of the cd into the fonts folder?
I am using 11.3 Gnome 32bit
I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies View Related
