Ubuntu Installation :: Upgrade 9.1 To 64bit
Jan 25, 2010
i have a question about upgrading Ubuntu 9.1 32 bit to 64 bit. 32 bit is installed (triple booted ) and working fine, but i would like to upgrade to the 64 bit version. Is there a way to do this without re-installing the entire operating system? I downloaded the 64 bit version and i made a disk out of it. when i insert the disk (while booted in ubuntu) i get the message A distribution volume with software packages has been detected and i can choose from start package manager or run upgrade. when i pick upgrade, it starts to do its thing, but then fails with the message 'Unable to locate any package files, perhaps this is not a Ubuntu Disc or the wrong architecture?'. i booted from the disk and checked it, it says there are no problems with it.
is it even possible to do this without re-installing ubuntu completely?
View 2 Replies
ADVERTISEMENT
Apr 21, 2011
I'd like to upgrade from 32 bit to 64 bit ubuntu. Is it possible without reinstalling the whole system?
View 4 Replies
View Related
Mar 22, 2010
Short of the story is I have an AMD64bit system for my 'server'. I find that there is lacking package support for ubuntu 64bit. Some apps I want to install work fine on 32bit ubuntu but not in 64bit ubuntu. More importantly the 64bit package for my ati drivers don't work, however they do on a 32bit version of ubuntu.
It would make sense to do a fresh install of ubuntu 32bit to avoid problems like this in the future. However my server has been running for years.. since ubuntu6. And it is highly customized. It would take too long to configure my server from scratch, I really want to avoid that. So I'm wondering, next time I do a dist upgrade.. say from 9.10 to 10.04. Is there a way I could trick the update manager in to upgrading to 32bit packages/kernel etc?
View 2 Replies
View Related
Apr 11, 2010
I've just upgraded my 9.4 to 9.10 on my 64bit desktop PC. Shortly afterwards I noticed that MySQL had gone away. There was no mysqld running. I tried a restart to no effect. So tried an un-install and re-install with the Package Manager. This failed! There was quite an extensive message in details, which started:-
invoke-rc.d initscript mysql, action "start" failed
dpkg: error processing mysql-server-5.1 (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent prevent configuration of mysql-server
And it goes on, but that's the essence of it. I subsequently tried a complete removal and re-install, to no avail.I notice that /var/log/messages contains:
Apr 12 01:10:15 Mintaka kernel: [ 2538.821153] type=1505 audit(1271031015.407:259): operation="profile_replace" pid=9328 name=/usr/sbin/mysqld
Followed by many:
Apr 12 01:10:15 Mintaka kernel: [ 2538.885370] type=1503 audit(1271031015.477:260): operation="open" pid=9355 parent=9354 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
View 1 Replies
View Related
May 28, 2010
After upgrading to 10.04LTR 64bit I encountered this problem below... I have already tried -f / --configure to no avail.
@ASUS-AMD64:~$ sudo apt-get upgrade Reading package lists. Building dependency tree Reading state information Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Do you want to continue [Y/n]? y
Setting up python-lazr.uri (1.0.2-1) dpkg (subprocess): unable to execute installed post-installation script: Exec format error dpkg: error processing python-lazr.uri (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: python-lazr.uri E: Sub-process /usr/bin/dpkg returned an error code (1)
View 6 Replies
View Related
Sep 12, 2010
im having a 64 bit ubuntu karmic koala version , i am thinking to upgrade to 10.04 (lucid lynx) , is it possible to upgrade to 32 bit version of lucid lynx ?
View 1 Replies
View Related
Aug 18, 2010
I currently have Ubuntu running in 32 bit with pae but I now want to switch to 64 bit. all of my hardware supports it. Is there an easer way to switch without needing to install Ubuntu all over again? It's such a haste to copy all of my files and reinstall programs and there settings manually.
View 9 Replies
View Related
Oct 10, 2010
wanted to ask-should i make auto update to 10.10? Does it work out of the box? Of course, i would wait final release, but just have no time to make clean install. Anyone knows if auto upgrade works fine?
View 3 Replies
View Related
Apr 2, 2011
Can I 'upgrade' from 10.4 32bit to 64bit without reinstall?
View 4 Replies
View Related
Jun 21, 2009
I'm running now fedora 6 in my laptop and i will like to upgrade to F11; i understand that the upgrade can be done only from F10 to F11;
Can anyone tell me the best way for me to upgrade from F6 to F11.
View 4 Replies
View Related
Jun 19, 2009
Firefox 3.5 Beta4 is completely unstable, once I open 2 or 3 tabs my entire laptop freezes. There is no control +alt combination that will take it off of it. I need to press the power button 10 seconds to reboot. I have done all updates. removed all add-ons from firefox. and still not working.I have never seen a linux machine completely lock up, even caps lock wont work
Any ideas? I saw that Firefox 3.5RC1 is out. HOw do I upgrade the 3.5Beta4?OR how do I downgrade to 3.0.11. I did download those versions, but I ran them out of their folders and not really upgraded the installed firefox.
View 16 Replies
View Related
Nov 19, 2009
I just upgraded from F11 to F12 and get this error:
[drm] nouveau 0000:01:00.0 GPU lockup - switching to software fbcon
With Ctl-F2 I can switch to console and login, so the system is running.
"ps -ef | grep Xsession" shows constant changing pid for Xsession, so I guess Xsession is continuously being restarted for some reason.
View 4 Replies
View Related
Sep 27, 2010
Is it possible to upgrade from F12 32bit to F13 64bit? The hardware would support 64bit.
View 1 Replies
View Related
Apr 27, 2011
Is there an easy way to upgrade kernel to 2.6.38?
Or do i have to compile a custom kernel?
View 3 Replies
View Related
Nov 17, 2009
Just started to use Fedora and version 11 a couple of months ago. Is it safe to use preupgrade to do an upgrade to version 12 or is it better to do a fresh install?
View 2 Replies
View Related
Apr 2, 2010
I am running fedora 12, x64. How can I upgrade fed12 as such? (apart from compiling the kernel myself)
View 3 Replies
View Related
Sep 30, 2010
I upgraded my F13 kernel from 2.6.33 to 2.6.34. But, the newer kernel isn't booting. It starts the booting process and then goes idle. how shall I troubleshoot?
View 2 Replies
View Related
Oct 29, 2009
I've just upgraded from FC10 to FC11 (x86_64). Before the upgrade Firefox worked fine (it used a fair amount of ram but I typically have loads of tabs open :P ) but since the upgrade running Firefox maxes out my cpu. The whole system runs unusably slow if I have Firefox running now. I switched from KDE to LXDE and just ran Firefox to see if I could free up enough memory to save some tabs as bookmarks and close them but it's impossible (and not a permanent solution anyway). Konqueror runs blisteringly fast but with a cpu monitor running I can see starting Firefox just maxes out the cpu and it stays there, it's not just a heavy load at startup.I have 3GB ram and it's a dual core Centrino 2GHz so it's not an old system running out of resources and FF ran perfectly well under FC10.
View 5 Replies
View Related
Dec 8, 2009
The -162 kernel upgrade just released failed to boot in my x86-64 system. Additionally, both previous kernels failed in (probably) the same way. The progress icon proceeded all the way to its 'f' image, and then hung. I touched escape key, and found several disturbing messages among a dozen or so lines --
mdadm: No arrays found in config file or automatically. A dynamic linking error occurred: /lib64/multipath/libcheckdirectio.so: no such file or directory awk: cmd. line:1: fatal: cannot open file `/etc/inittab` for reading (Invalid Argument). Init: rcS post-stop process (807) terminated with status 2s. I got into rescue mode with my install disk, then looked for libcheckdirectio.so in /mnt/sysimage/lib64 but it was not there. Also, locate -d /mnt/sysimage/mlocate/mlocate.db/libcheckdirectio.so found nothing.
Ran chroot and executed the fakd diagnostic (which I had not seen before) and rebooted. Same problem - although now the screen is telling me SELinux is requiring a targeted policy relabel. My dual-boot-to-vista system has been erratic (requiring fsck several times, and confounding the Vista partition to require file checks), primarily since a large install of Eclipse and multiple plug-ins AFAICR.
View 14 Replies
View Related
Dec 13, 2009
I upgraded from F11 to F12 and since then the light of the floppy drive stays on. Is this a known bug or should I report this?
View 7 Replies
View Related
May 17, 2010
I have this 11.0 64bit workstation here. It has been running flawlessly for the longest time. It is setup really nicely for this particular job.Anyways, I would to upgrade it to 11.2 64bit without starting from scratch. What would be the best, simplest way to do this?
View 9 Replies
View Related
Aug 2, 2011
I just got the upgrade for the Linux Kernel version 2.6.40-4 on my Fedora 15 x86-64 box today, and the installation completed with no problems. However when I rebooted after doing the upgrade, I noticed that I had no sound. I use an ATI Radeon HD 4350 video card, and the opensource ATI driver, and use the HDMI audio from it for sound, since my monitor has a sound output jack on it. I've booted into the previous kernel (2.6.38.8-35), and sound works fine. I've tried with the new kernel in both KDE (my default desktop environment) and XFCE to get sound, and it does not work in either one. I've tried installing the VLC Phonon Backend instead of the GStreamer Backend, reinstalling Pulseaudio, reinstalling Alsa, modprobing the necessary modules needed for the card, checking all configurations with the available Pulseaudio tools (paprefs, pavumeter, pavucontrol), checked the volumes using alsamixer, and reinstalling the ALSA Pulseaudio plugin. After trying all of these, I can still get no sound out of any application, and I also noticed that Flash video plays at 2-3 times it's normal speed after the upgrade. Again, these problems do not occur on my previous kernel. Did I maybe overlook something, or can anyone else think of something I could try?
View 14 Replies
View Related
Jan 20, 2010
I'm trying to install Kubuntu 9.10 on my machine (I had the same problem with Kubuntu 9.04). The machine is:
- Core 2 Quad 6600
- Nvidia 7600 GS
- Two disk seagate 500 in mirroring raid software
When I try to install Kubuntu, after disk partition, my system dosn't see the CD. He tell me to insert disk into drive but I doesn't touch it. I resolved this mounting an external hard disk into /cdrom. After this, the installation continues until the step "select and install software". At this step, the installation procedure tell me an error. During this error, in the other console, I've this:
Code:
Jan 19 21:58:09 in-target: Alcuni pacchetti non possono essere installati. Questo può voler dire
Jan 19 21:58:09 in-target: che è stata richiesta una situazione impossibile oppure, se si sta
Jan 19 21:58:09 in-target: usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
[Code]....
View 3 Replies
View Related
Feb 12, 2011
I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
View 1 Replies
View Related
Apr 23, 2010
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
These errors with USB stick:
View 9 Replies
View Related
Jun 1, 2010
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies
View Related
Mar 4, 2009
Can you give me a step by step screenshot procedure in installing Fedora Version 8 64bit?
View 6 Replies
View Related
Apr 16, 2010
I am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.
View 2 Replies
View Related
Mar 29, 2010
I'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
View 1 Replies
View Related
Dec 28, 2010
I'm using couple of Intel Core i7 based workstations. Here is one such example:Processor: Core i7-870 (Lynfield) Motherboard: Gigabyte P55A-UD6RAM: Corsair DDR3-1600 - 8GB (4 sticks). Graphics: Sapphire Toxic ATI 5850 - 2GB - DDR5Am always used to 32-bit Linux installation. Now I would like to go with the FC14 64-bit on this workstation. My question is:a) How different would be a FC 64-bit compared to 32-bit (8GB RAM issues I faced in Windows 7 32-bit)b) What would be potential problems during the installation and/or post installation. I get these questions in my mind because of Motherboard and Graphics card support and also thinking about applications (issues) on FC14.
View 4 Replies
View Related
