Ubuntu Installation :: Installer Can't Find Partitions And XP-installation
Mar 15, 2010
The instaler doesnt find my partitions and the XP that is installed too! For some reasons i cannot delete the whole hdd... if i format the partition, where (i want to install ubuntu) with fat, the pc crashes during the installing process after the tastaturlayout question! if i try some other formats, the installer tells me, that there are no Operating Systems installed and the hdd is unpartitioned!
if i start ubuntu live from the cd, the system finds all partitions, but if i run cfdisk in a terminal, i get a fatal error (cannot open disk space)... My machine is a acer aspire 1694 WLMi (pretty old, but should be no problem), bios is up to date, Windows is XP home edition with SP3.
View 6 Replies
ADVERTISEMENT
Mar 22, 2011
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
[Code]....
View 9 Replies
View Related
Feb 14, 2011
I try to install Ubuntu 10.10 on HP notebook G62 (Intel-i3, 64-bit). It have a 320GB hdd with my laptop which now consists of:
1) SYSTEM volume
2) (C: ) volume with windows 7
3) RECOVERY (D: ) volume
4) HP_TOOLS volume
1 to 4 are originally there. And now I shrink (C: ) by 50GB to get a unallocated space in which I decide to install ubuntu: First I try to shrink by Windows7 tools, but installer did not see unallocated space (but shows list of my volumes). Then I install Acronis disk director and made 50GB unallocated space by Acronis. After this Ubuntu installer does not see any volumes on my HDD Windows7 boots had works normally. I try to restore ALL from image by HP TOOLS but without result - installer doesn't see any volumes. I try boot from CD, remove dmraid and all raid package and try run installer - no result.
View 9 Replies
View Related
Jun 5, 2010
I have windows installed in c drive and there are 3 other partitions namely e,d,f.I booted kubuntu/ubuntu live cd.The installer doesnt show any partitions.This is my windows:- http://imagebin.ca/view/Uj-KB26v.html
This is at kubuntu at installer step:- (Same is the case with ubuntu)http://imagebin.ca/view/wZBYBV.html
fdisk -l report:- http://imagebin.ca/view/CH8fiE6r.html
I tried alternate cd also...no change!
View 4 Replies
View Related
Nov 28, 2010
I'm trying to install Ubuntu 10.10 from my live USB disk. In My computer, it is showing all drives correctly, but when I try to install using the installer on desktop, it is showing the whole hard disk as free space and no partitions at all.
when I tried 'sudo parted' and then print command, I got the below error message.
Error: Can't have a partition outside the disk!
I formatted the C drive from linux using ext4 filesystem.
How can I make the ubuntu installer recognize my partitions?
View 3 Replies
View Related
May 5, 2010
When trying to install Ubuntu 10.04 desktop from USB pendrive I can't see the sda partitions in the manual partition editor.I have a dual boot PC with Windows XP Pro and Ubuntu 8.10 running (see below for more details). Using the 10.04 Ubuntu desktop edition on a USB stick (pendrivelinux), I can boot without a problem and everything works fine: mount/unmount of all my drives, read data, etc. But I can't install the 10.04!When running the installer, at the point where the partition is selected, I choose "manual" as option. On the next screen I only see the drives/partitions starting from /dev/sdb1... to sde, but NOT /dev/sda. The "Add" button is greyed out, I can only edit the existing partitions. When I edit and press forward I get an error telling me that the SWAP partition is missing. I already HAVE a swap on sda.
I also tried booting Ubuntu 10.04 and then running the installer - no difference. I also remove the plug from one of the drives (sde) - still the installer doesn't show me sda.I would like to install 10.04 without messing up my Windows XP Pro and without messing up my /home partition or any other partitions that are non-Ubuntu stuff.In former years this used to be the easiest part, now it looks like a challenge. Any help is appreciated. System and background info:Hardware: Desktop PC with Intel Core 2, Nvidia graphics card, 5 SATA hard drives hooked to Gigabyte mother board, two network cards (only one in use)Current OSes: Windows XP Pro on sda1, Ubuntu 8.10 on sda and sdb
View 9 Replies
View Related
May 10, 2010
When I tried to install Ubuntu 9.10 or 10.04 (from CD or USB drive), and selected manual partitioning, the installer would not show all my drives.
However, when booting the life CD/USB, gparted or the Disk Utility did recognize all drives and partitions.
It turned out that one of my drives was marked as RAID partition, although I never used RAID!
Here the symptom:
When you run the installer and select "manual partitioning", the resulting list of drives and partitions is incomplete. In my example it was:
sda
- sda1
sdc
- sdc1
[Code]....
You may have multiple drives with the RAID metadata on it. In that case you need to repeat the above command for all those drives. Just make sure you don't wipe out your existing RAID, if you have one.
Reboot the system and see if it works.
P.S.: Also check your BIOS settings - do you have drives configured as RAID?
View 5 Replies
View Related
May 22, 2010
I'm trying to install ubuntu 10.04 on an old computer, but the installer doesn't have any listed partitions and I can't go any further. The hard drive I'm trying to install it to was just formated in Windows 7, it's a clean hard drive. Uh, how am I supposed to install it?
View 1 Replies
View Related
Jul 2, 2010
HDD with four partitions: Three DOS bootable primary partitions are located in the head, and the residual extended partition is divided into several logical drives.
1st trial: 10.04 installer recognized the last largest logical drive for system installation, but installer truncated the extended partition, and created the "terrible" 5th primary partition at the end of the HDD. GParted and other utilities cannot access to this 5th primary partition. (So, I restored the lost partition table on the HDD manually by MBM. But several OS were broken.)
2nd trial: To avoid making this "terrible" 5th primary partition, I located the largest logical drive for installation at not of the end.10.04 installer recognized this logical drive, but failed again.I tried GParted. but also failed to formating to ext4.Maybe, 10.04 installer failed at this formating step. Logical drives are not supported in 10.04 ?
View 9 Replies
View Related
Sep 3, 2010
I have two hard disks, the one that I work with and another one for backups. The main HD had an OS (Ubuntu) partition, a partition for /home and a lot of free space.I installed latest Mandriva creating a new partition. Everything OK. But it overwrote GRUB and I couldn't boot into Ubuntu, so I reinstalled GRUB from the Ubuntu live CD. I got my Ubuntu back, but then it wouldn't boot into Mandriva. Well, I didn't care. But now the problem comes.
Right now, if I try to install Ubuntu from live CD, the installer won't see the partitions in my main drive. It sees the partitions in the backup drive, but the main drive appears as empty, no Ubuntu, no Mandriva, and no /home. Debian testing installer did just the same. Those partitions are there and I can boot into them and see them; it's only the installer that does not see them.
View 2 Replies
View Related
Apr 11, 2011
Wanting to dual boot XP with UBUNTU. Live CD verified good.
ran df in terminal:
Ran sudo fdisk -lu in terminal:
Partition table entries are not in disk order
Originally I had two partitions for Windows xp of 100 gig each. I cleared / backed up the second partition and created two 50 gig partitions, splitting the second into two linux (using Gparted) partitions labelled root and swap.
Disk Utility sees this hdd as a RAID component. It is connected through a RAID controller.
The installer (in allocate drive space step) doesn't see them for some reason.
Hardware:
AMD Athlon 64+clawhammer processor
Asus A8N-SLI mobo
hdd as above
2 Gig RAM
DVD / CD Burner
View 5 Replies
View Related
Jun 20, 2011
I am having trouble with the advanced partitioning, I dont know what any of the mount points are for. I have a 64GB SSD which I want to use only for the boot files, and I have a 640GB which I want to place everything else on, as to preserve the life of the SSD. How should I configure my mount points/partitions in the ubuntu 11.04 installer?
View 6 Replies
View Related
Apr 17, 2011
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
View 2 Replies
View Related
Apr 4, 2010
I am booting from a USB stick live CD image of Kubuntu 10.04 Beta. When I run the installer, and choose the "manual select partitons" option, it lists only my full hardisk, whereas I have atleast 5 partitions on it, and none are shown. Could anybody help me with this? I want to install on one of the partitions and leave the rest intact. I am dual-booting BTW.
View 4 Replies
View Related
Sep 9, 2010
I went to install Ubuntu 10.04 on my home pc last night but I couldn't. The installers could not see my raid and even though I wished to install to a seperate HDD windows is installed to my raid. The windows MBR always overtook the Grub and whenever I start grub up it cannot find an OS or Kernel.
I have got an ASUS Rampage 3 Extreme [URL] and on it there are two 6.0 sata Marvell connectors: [URL]
In these two Marvell connectors are two WD velociraptor 10,00 rpm Raid 0 drives. On these two drives is installed Windows 7. The ubuntu installer cannot seem to see the raid pair and so does not install Grub correctly.
View 5 Replies
View Related
Jan 8, 2010
I'm trying to set up a dual boot of Ubuntu & Windows XP.I have two hard disks installed - sda is 80GB and has an existing Windows setup on it, sdb is my 160GB data storage disk.When I have installed Ubuntu on other machines, it has detected any exisiting OS's and offered to install Ubuntu alongside them.
However, this time Windows doesn't seem to be detected - it says 'no other operating systems found' and wants to install to my second (i.e. sdb) disk. I was intending for Ubuntu & Windows to sit side-by-side on the first hard disk.Although I've installed Ubuntu before, I'm a bit of a novice and I'm not sure how to achieve this - where am I going wrong?
View 4 Replies
View Related
Sep 3, 2010
The Fedora installer won't display my two SATA hard drives. I've tried both the x86_64 live CD and DVD. On the live CD, fdisk -l displayed nothing. However, if I click "Specialized Storage Devices" a devices shows up as "BIOS RAID set (stripe)" with a capacity equal to both my hard drives. I don't even have RAID enabled in BIOS - it is set to AHCI. Other os installers display the hard drive correctly.
Specs:
2x 640GB western digital caviar blacks
ASUS M4A78T-E 790GX motherboard
View 2 Replies
View Related
Aug 28, 2010
I try to install linux on hpc mini. Let's crack some keyboards. I have just bought a new pc: hpc mini compaq! I find windows Xp rather fine; but let's try linux. The PC has no cdrom, so, I cannot boot from any ISO of debian. I choosed testing netinstall, and followed the how to given on the debian website from another PC using knoppix iso cdrom. I did placed five files as shown here onto my pendrive as followed in one howto: I found 5 files for testing:
Code:
debian-testing-i386-businesscard.iso initrd.gz vmlinuz
and
Code:
26644480 Aug 28 17:44 ../squeeze-debian-testing-i386-businesscard.iso
with :
[Code]....
View 2 Replies
View Related
Nov 11, 2010
I am using my flashdrive to install. I allocated 200gb for window 7 ult and used partition magic to format the rest to ext3 and swap for DISK 1. But when I try to install Ubuntu, installation can't seem to find the ext3 or the swap. It only sees my other drive in RAID 1.
My harddrive setup
Disk 1(RAID ready)
NTFS 100 mb - System
NTFS 195.21 GB
EXT3 253.88
Linux Swap 16.46 GB
DISK 2 (RAID 1)
NTFS931.31
View 8 Replies
View Related
Jan 1, 2011
Im trying to do a frugal install off the hard drive (no usb,cdrom) with unetbootin. It installs grub and then will boot the installer but is still tries to find the removable media. Whats going on????
View 2 Replies
View Related
Sep 11, 2010
I've decided to give ubuntu another test drive now that I got a bigger and better desktop. I downloaded the latest version of ubuntu, loaded it into my usb stick and booted from it. I then clicked on the install icon on the desktop to start the installation. Everything was going ok, until I came to the partitioning part. I had already (on windows 7) created a separate partition for ubuntu which is 56GB. So I chose "manual partitioning" and selected the ubuntu partition as /home and began the installation.
Everything seemed to have went well, the window suddenly closed and then nothing happened. I waited for 15mins and still nothing happened. I decided to restart and see what happened, but I discovered that I couldn't boot into windows anymore. It said something about intel boot manager cannot find filesystem. So I decided to boot back from the usb and see if I can reinstall ubuntu, I came to the partitioning part and all the drives were gone, I couldn't see anything, it was blank.
View 4 Replies
View Related
Feb 27, 2011
I have already read the related threads but unfortunately, none of the solutions works/ applies to my problem: Having Ubuntu 10.10 as bootable DVD, I am trying to upgrade from Jaunty. When I do so however, after selcting "Install Ubuntu 10.10" in the installer menu I get the "unable to find medium containing live file system" error. I already installed grub2 and set acpi=off, my DVD is on primary master and, obviously boots as well.
View 9 Replies
View Related
Apr 23, 2010
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
These errors with USB stick:
View 9 Replies
View Related
Mar 3, 2010
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
Code:
sudo fdisk -lu
sudo sfdisk -d
sudo parted /dev/sda print
and have received the following output:
Code:
ubuntu@ubuntu:/mnt$ sudo fdisk -lu
omitting empty partition (5)
Disk /dev/sda: 60.0 GB, 60011642880 bytes
[code]....
View 3 Replies
View Related
Feb 9, 2011
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies
View Related
May 3, 2010
I have three physical drives:
Drive 0: Used for paging file in windows and general temp file storage
Drive 1: Media storage
Drive 2: Windows installation
When booting off the Ubuntu 10.04 disc and running the installer, it gets up to the partition step and doesn't find my Windows installation (for the automatic partitioning and such) and lists Drive 0 as the drive it will install to. I really want it to see my Windows install and create a partition on that same drive. Can anyone help me in getting the installer to see the Windows installation?
View 5 Replies
View Related
Feb 18, 2010
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
View 4 Replies
View Related
Sep 27, 2010
Please bear with me as I'm incredibly new to Linux and shell scripting and all that good stuff. This will be a fairly lengthy post, as I don't really know which information is pertinent to the problem at hand and which is irrelevant. I installed Ubuntu on my Macbook following the instructions on this page: [URL].. At step 7, /dev/sda3 was not in the dropdown menu of options, so I picked...I can't remember. Either /dev/sda or /dev/sda2. I think this may be the beginning of the root of my problems. Step 8 is where it all falls apart. I get the following error message: "Status: MBR partition table is invalid, partitions overlap. Status: GPT partition of type 'Unknown' found, will not touch this disk."
Sooo since I can't sync the partitions, I can't get Linux to load unless I'm loading it from the LiveCD. I've tried steps 1-10 on this page:[URL].. However, under step 4, I could either "Save" the file randomly, without actually saving it to /mnt/root, or I could just open it and run the installer. I think I went into FF preferences and changed it to let me pick where each download would be saved, but when I actually clicked on the download link and then "Save", after finding the folder and clicking the final button (Which I think actually said "Open" instead of "Save"), nothing happened. I tried running the rest of the steps after just opening the installer on its own, but of course just got error messages. I hate not being able to troubleshoot this on my own!
View 4 Replies
View Related
Dec 22, 2014
After a fresh install of 7.7.0 (amd64), I'm unable to boot into Debian. I get the following error constantly when booting in recovery mode:
(snip) [drm] nouveau (snip) PMC - unhandled INTR 0x44000000
A bit of Googling seems to indicate that this is due to my video card (Geforce GTX 750Ti). Unfortunately, my motherboard doesn't have any monitor ports, so I'm forced to use a video card in order to use a monitor. Something I didn't foresee being an issue, but what can you do. How should I resolve this? Is there an ISO that has the (presumably non-free) drivers included? A way I can add the drivers during boot (I am able to boot into my Windows partition by changing the boot order, don't know if I can do anything useful from here)? Or do I have to do something crazy like buy/borrow an older video card just so I can properly boot into Debian, and then install the drivers?
I've got a secondary problem: GRUB has my Debian install as the only option, even though I had Windows 8.1 installed first. I don't know if this is related to the problem above, or it's a known problem with newer versions of Debian and/or Windows (and I have to update the menu.lst or whatever myself), or if it's due to the way I set up partitions. My current setup is:
SSD:
- Windows boot partition
- Windows main partition
- Debian / partition
- Debian swap partition
HDD:
- Debian EFI partition
- Debian /home partition
- Unallocated space (will eventually be a NTFS partition for shared storage)
This is the first time I'm using a motherboard with EFI/UEFI. It's also the first time I have an OS taking up partitions on multiple physical devices. I don't know if either is the cause of GRUB not detecting Windows.
View 2 Replies
View Related
Jan 25, 2010
I recently obtained a new computer from my brother, and after putting the old one away (which had Ubuntu on it), I began the search for my disk. I found it, and installed Ubuntu, but I did something in the partitions, as the Linux partition now has 3.3 GB of space, thus being full from the start. What I did was pick the option to manage the partitions manually, as I didn't want to use the whole HD (too many important things on Windows), and when I hit "use largest available space" and slide the slider on the partition bar (or didn't), it kept coming up with errors. So I edited the partitions manually. It's roughly a 120 GB HD, and I separated it into four partitions: one 50 GB one (with Windows on it), one 70 GB one, one 7 MB one for swap space, and then the root file system. I think what I did wrong was the 3 GB one; and now I'm guessing that the root filesystem was the partition Linux was installed on, which I had forgotten since my first install. Is there anything I can do short of reinstalling?
View 3 Replies
View Related
