I'm trying to migrate my emails and (at least) account settings from Thunderbird 2 that is installed on my main machine here, and move them to another Windows-based installation of Thunderbird.
I tried searching here and Mozilla.org, but can find no answer. Since the source Thunderbird installation is the one installed on my Ubuntu machine, I thought I'd start here. (plus, I get better answers here)
I have recently tried to migrate to kubuntu. I am reading manuals and studying the matter right now, trying to find help via googling and stuff, but for some (i suppose, trivial) matters i just cannot seem to get help and reading manuals leads me nowhere.I am sorry if my questions seem trivial or are answered in manpages or on this forum, i tried searching and didnt found...
1) how to correctly install something, for which a "Stable Source Release" is provided. Especially when options are to be set
2) how to get knowledge about what version of something (in this case, ntfs-3g) is installed in my system, and what kind of options were set when it was installed
3) what exactly happens when i type "make" withing a folder i just extracted my "stable source release" gzip to?
4) what exactly happens when i type "make install", how does it know where to put what files, make changes to my system etc...
5) how to undo what it (make install) has done (because i had already corrupted one installation of kubuntu by simply doing an unsuccessfull make install of an x-fi driver package and then an alsa package)
6) when i install something with "apt-get install <packagename>" does the downloading of "source stable" happens and "make install" is ran for me, or something else?
7) Do gui package managers just do the "apt-get install <package name> " for me when i check to install something or do they do something extra aside from that? Like synaptic?
8) when i install something with the same name, but different version, what happens? like if i do an "apt-get install XYZ" of version 2.0 when i already have XYZ of version 1.0 installed, will 1.0 get overwritten by 2.0 or will i have both installed in my system?
9) how do i know which "options" are used when i do apt-get install of a package? for example, if package says "build with this option to achieve this result" how do i know if this option is on or off or can i control it when i apt-get install this package?
10) if i installed something with "make install" - can i later uninstal if with apt-get uninstall package or i have to somehow manually remove files? what is the common procedure?
11) if i installed something with "make install" - can i later upgrade it with "apt-get"?
12) why i read in books, like for example here (http://rute.2038bug.com/index.html.gz), that i should partition my disk in multiple partitions:
- one for swap
- one for / file system
- one for /usr
- one for /tmp
- one for /var
- remaining space goes for /home
because then if one gets overflown, full or broken, it wont affect the others, and you can afford to loose some and it eases the recovery of system in case of a fault
but then, kubuntu installs itself just in two partitions, swap and the rest? Is multiple partitions scheme outdated or?
13) Why if i ctrl-alt-f1 out of my KDE and run kate (any gui program), it says "cannot connect to X server" while xserver is indeed running on my pc (otherwise how would kde work?)
14) what is under ctrl-alt-f12, f11 etc, it is a blank screen with a cursor in top-left
15) is there a way to set the vga mode for tty's that are accessible with ctrl+alt+f(1-6) to 80x50 (i prefer that over the 80x25 that is set by default there)
i've read that you could do that in lilo config files you just do vga=extended
but now kubuntu uses grub so... how do i do that?
16) i've read that "linux is good because you can shut down an app that hangs your pc by going to terminal and sending a kill signal, something you cannot do in windows because windows has no way to escape a frozen gui"
But when i had a way to test that in practice (today i tried some decoration scheme for my KDE and it froze my desktop) i found out i have a freaking lot of processes running (with ps -A) and.... well, what should i have done to unfreeze my desktop? And how do i know what exactly hangs my PC in order to terminate it? (like in windows - you very frequently have a nearly dead non-responding pc, but doing CtRL-ALT-DEL shows that "system idle" has about 3/4 of your processor time and there is no problem with memory consumtion either, yet system barely can respond to your input")
17) i've heard and read about "linux needs no reboot" but in practice, installing nvidia drivers requires reboot, for example. So, is it really true or there is a way to make those drivers go without rebooting, they just tell me to reboot because i'm considered a newbie who doesnt know that "linux does not need reboot"?
18) KDE is very annoyingly preventing me from doing anything in "LEAVE" menu without a 30second-confirmation box (shutting down in 30 s...)... and i dont seem to see any settings for that in the gui... same goes for asking me to close my tty's - can it do it by itself? what config file should i edit?
19) As i read, linux filesystem philosophy is that settings go into /etc and that everything is a file, so, in order to change anything in my system it boils down to editing a file. Now, why do the files are so scattered? For example, why does alsa config file live as a hidden file (starts with .) in my home, and a file to set up mounting behavior lies in /var/lib/polkit-1/localauthority/10-vendor.d/com.ubuntu.desktop.pkla or /usr/share/polkit-1/actions/org.freedesktop.udisks.policy.
Do only system apps like mount use /etc for their configs, and how do i generally know where to look if i want to change something (like in windows, i'd go look in the application path, in my user folder's corresponding folders - my documents, application data etc and in registry).
20) As i read, linux ideology is about program scattering istelf all over the file system. Countrary to windows where program occupies a folder in which it nests its own folder tree (like data, sound, themes), a linux is said to put binaries into /bin, configs into /etc and so on. What happens if programs are called the same or use same files? For example, if two people make a program with a same name or use same file (for example, alot of windows programs used to use settings.ini to store user settings, if that would be in a same folder...?) or make a same short name for their program (like a long program name abbreviated to three letters for simplicity, but what if two programs have same abbreviations?).
How to refresh and reload the list of email into MUTT ? Which key?
Additional: how to go to folder SENT of gmail ? and configureation eventually?
I'm just trying to migrate to Ubuntu 10 Beta from Gentoo. One option in the installer intrigued me. It said something like (from memory) "Use password to log in and decrypt my home directory".
What happens behind the scenes when I choose this? (How) can I enable this later on? (I didn't activate it because I wanted to migrate my Gentoo user's home as painless as possible.)
I am currently running 10.10 Merekat as 11.04 will use the horrid unity enviroment i am looking into ways to have the next version work how iI want not how cannonical want therefore i ask the following What is the best way to 'migrate' to 11.04 xubuntu from 10.10 ubuntu? Is it just a case of re-pointing the repo's towards xubuntu.org & then removing Gnome?
I know this is probably an odd question but i seriously cannot live with unity as my desktop & just do not want it installed even if i wont use it! If this change is too big then i may move away from ubuntu altogether but as i have used it since warty warthog i am obviously reluctant
How do I migrate my user list to a new server installation? I thought that just copying /etc/passwd and /etc/shadow would be enough. I recently tried upgrading a lightweight bazaar server to 11.04, and the upgrade crashed. I had to perform a new installation of Ubuntu to recover operation of the system. I installed on a different hard drive. I had a dozen other people with user logins, so that they can get or modify bazaar repositories.
The new installation is running, and I can read all of the files on my old system's / drive. I tried copying the /etc/passwd and /etc/shadow files onto my new /etc -- but that did not seem to work. (When I looked using the System->Administration->Users-and-Groups GUI tool, there were no users visible, so I restored the old files.) What I intended to do was to clone the /etc and /home trees over to the new system. What am I missing?
I was using a Sony laptop with Ubuntu 10.04 installed on the machine. I have just bought a Mac and I will be using Ubuntu 10.04 as my primary development OS by virtualizing it using VirtualBox.Now, my requirement is, I had a near perfect development environment setup on my Ubuntu box and I don't want to install the packages, apps, setting etc again on my VirtualBox VM.
I know there are ways to export apps, setting etc, but is there some app which will actually create a VDI disk for my VirtualBox which, when I plug in to my VirtualBox, I will get the old Ubuntu on my VM.
how to migrate my whole server to larger hard drives (i.e. I'd like to replace my four 1TB's with four 2TB's, for a new total of 4TB instead of 2TB)... I'll post the output from everything (relevant) that I can think of in code tags below.
I'd like to end up with much larger /home and /public partitions. When I first set up raid and then LVM it seemed like it wouldn't be too hard once this day arrived, but I've had little luck finding help online for upgrades and resizing versus simply rebuilding from a failure. Specifically, I figure I have to mirror the data over to the new drives one at a time, but I can't figure out how to build the raid partitions on the new disks in order to have more space (yet mirror with the old drive that has a smaller partition)... don't the raid partitions have to be the same size to mirror?
Ubuntu Server (karmic) 2.6.31-22-server #65-Ubuntu SMP; fully updated
Code:
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md5 : active raid1 sdd5[1] sdc5[0]
968952320 blocks [2/2] [UU]
[Code].....
Can we migrate to make version 3.81 in Fedora 14? make 3.82 is made available in make Fedora 14 which has compatibility issues with make files of 3.81 version.
View 3 Replies View RelatedI want to do an apparently simple task but since I migrated to Opensuse I found no way to do it. I have an enhanced install of Opensuse 11.3, where I added softwares from different sources according to my needs. Now that it's working fine I would like to make the same kind of install for two friends of mine and for a virtual machine on Virtualbox. In Ubuntu I used remastersys and in few minutes it created a live DVD with all the content of my system, and all of this offline, without downloading anything else. In Opensuse the only resources that most resemble that are Kiwi and Suse Studio.
But it seems that in both the softwares must be downloaded from repositories online. That would not work for me because it would take a very long time to find out all the packages I installed, from what repositories and my internet connection is very slow so I could not do it all at once. I tried Clonezilla but I was not able to restore the content of my Opensuse partition to a different machine. It gave me error messages, didn't make the restore and I didn't find a solution anywhere online. How can I transfer the content of my Opensuse installation to another computer without having to use online resources?
I have just had an auto-update, and the process has stopped with the warning above. The full error message is given below. I had already had problems (not sure if they're somehow resolved or related to this) with updating [URL]. Tests have determined that problems in the boot system exist which prevent migration to dependency-based boot sequencing:
package virtualbox-ose removed but not purged, insserv: warning: script 'K20acpi-support' missing LSB tags and overrides, insserv: warning: script 'usplash' missing LSB tags and overrides, insserv: warning: script 'hwclock-save' missing LSB tags and overrides, insserv: warning: script 'acpid' missing LSB tags and overrides, insserv: warning: script 'gdm' missing LSB tags and overrides, insserv: warning: script 'failsafe-x' missing LSB tags and overrides, insserv: warning: script 'acpi-support' missing LSB tags and overrides, insserv: warning: script 'udevmonitor' missing LSB tags and overrides, insserv: warning: script 'hwclock' missing LSB tags and overrides, insserv: warning: script 'rsyslog-kmsg' missing LSB tags and overrides, insserv: script virtualbox-ose: service vboxdrv already provided!, insserv: script virtualbox-ose: service virtualbox-ose already provided!, insserv: warning: script 'dmesg' missing LSB tags and overrides, insserv: warning: script 'procps' missing LSB tags and overrides, insserv: warning: script 'atd' missing LSB tags and overrides, insserv: warning: script 'avahi-daemon' missing LSB tags and overrides, insserv: warning: script 'udevtrigger' missing LSB tags and overrides, insserv: warning: script 'apport' missing LSB tags and overrides, insserv: warning: script 'udev' missing LSB tags and overrides, insserv: warning: script 'ufw' missing LSB tags and overrides, insserv: warning: script 'rsyslog' missing LSB tags and overrides, insserv: warning: script 'anacron' missing LSB tags and overrides, insserv: warning: script 'network-manager' missing LSB tags and overrides, insserv: warning: script 'dbus' missing LSB tags and overrides, insserv: warning: script 'udev-finish' missing LSB tags and overrides, insserv: warning: script 'module-init-tools' missing LSB tags and overrides, insserv: warning: script 'hal' missing LSB tags and overrides, insserv: warning: script 'cron' missing LSB tags and overrides,
To reattempt the migration process after the problems have been fixed, run "dpkg-reconfigure sysv-rc".
This may sound dumb but if I upgrade from 8.10 to 9.04 will I lose all of my emails addresses, bookmarks, etc?
View 1 Replies View RelatedWhat is the easiest and/or safest way to migrate my Wubi 10.04 install to a full install? Currently, my Dell XPS M1530 is currently dual-booting Ubuntu 10.04 LTS and Windows Vista Home Premium, and I've decided after using Windows a total of around 4 hours over the past 6 months that I can probably let it go. So, I don't need Windows anymore and I believe I'm ready for a full install of Ubuntu. Though, I probably will wait for 11.04 to come out first.
A few ways I've thought of already are: 1) Find an external hard drive to put the Wubi files on. 2) Upload files to an storage website. 3) Temporarily put the Wubi files onto another computer (Windows). All these meaning I would then wipe my harddrive and install Ubuntu from a CD. And by "files", I mean Documents, Pictures, Downloads, etc.
EDIT: deleting all my applications, because OpenOffice.org won't reinstall on my computer due to dependency issues while attempting to install LibreOffice. So a fresh install would be nice.
I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
I upgraded from Karmic to Lucid (Ubuntu 10.04) a few days ago (without backing up any data first). At first everything seemed fine but yesterday three things happened:
1. All my emails and address book have disappeared in Thunderbird. When I started Thunderbird, it took me through the wizard and seems to have overwritten my profile with a new one. There is only one profile in the Thunderbird folder and it seems to contain no emails and only a new, blank address book (the small size of the folder backs this up. I searched the hard drive but found no other emails or address book files.
2. My bookmarks have disappeared from Google Chrome. Again, it seems to have created a new, blank bookmark file. The bookmark.bak file is similarly blank and when I search I can find no other bookmark files.
3. The Pictures folder (in the home folder) is now empty; suggesting that ubuntu has either overwritten the Pictures folder with a new blank folder or deleted all the files in it. Again, when I search the hard drive for jpg files, it doesn't find any of the pictures that were in the Pictures folder.
It's me again, I wish to be a little more organized. I incidentally installed Ubuntu on the same partition as my main Windows 7.
Is there a possible way to "migrate" this Ubuntu OS to another partition, keeping all of the settings. Also, would "migrating" the OS interfere with GRUB2?
I'm running Ubuntu 10.10 x64 and have been using an encrypted ext3 setup (created with the alternative installer CD) ever since Hardy or so. Is it possible to migrate my partitions to ext4 without formatting/reinstalling ?
View 1 Replies View RelatedI have used Ubuntu for 4 years. I'm thinking of trying Fedora. I have a 1TG HD with three partitions(/,/ home, swap).Any suggestions about how to migrate? Do I clean /home of programs files? Just my personal files? Etc.
View 4 Replies View RelatedI was not sure if Desktop meant 'Desktop vs Server', or Desktop as in relation to Windows Managers.
I want to move a domain from one web host to another. I also want to preserve my email. Does anyone have a recommendation for software which will allow me to:
(1) Copy current web host email locally
(2) Switch web hosts
(3) Populate new web host with local copy
I've looked at imapcopy and imapsync. Unfortunately, both want Server -> Server. I briefly looked at setting up a local IMAP server (dovecot-imap), but it is clear that this is more ISP-grade. I did not see a quick example of user management in [URL], and I don't really want to spend days working on the configuration.
Any recommendations for software that allows me to 'backup' and 'restore' to/from a local file store?
I'm moving a user from an old 8.x Xubuntu install to a different machine with 10.04 installed. I want to migrate all the user's files and settings to the new machine. I see Ubuntu has a migration assistant, but the limited documentation I've found on it talks about using for in-place upgrades from older/other OSes.
Ideally, something like this would work like the Apple Migration Assistant or Windows Easy Transfer. If so, how do I access this? Anyone have a tutorial? If not, can someone point me to instructions to move the proper folders, create the user, assign permissions, etc.?
I want to change my partition configuration, and migrate my install to a drive I haven't used in a while.I've followed the steps which I have seen in several locations, but for some reason I can't boot into it (hopefully it's something simple )Here's what I've done so far:Deleted all of the partitions on the drivecreated a new EXT4 and swap partition on the drive (and others that are currently unused)mounted the new drive, and rsynced the old drive with this command:
Code:
sudo rsync -va --exclude=/media --exclude=/proc --exclude=/lost+found --exclude=/mnt --exclude=/sys --progress / /media/ubuntu
[code]....
I'm about to migrate from a single 1TB drive on my Mythbuntu system to a two-disk setup with a 500GB drive for boot, root, home, etc. and the entire 1TB drive reserved for MythTV and shared videos.
In addition to being on a different hard drive than now, the partition numbers are somewhat wonky currently; I originally dual-booted Windows on sda1, which will no longer be the case. sda2 is the current myth partition and is the back half of the drive for some reason I won't go into here. Partitions 3 through 7 work all right now as root, swap, home, and space reserved for a virtual machine, but I'd like them to be 1 through whatever just for keeping me sane.
Is there a good way to do this? I was going to use remastersys to install my current install there, but I'm not certain all the data I need for a seamless install will fit on the 4 GB jump drive I have. I can mount the old partitions and copy some stuff over afterwards, but it would be nice if there were a way to just dump it on and have it mostly work. I've had to jump through some hoops to get it working the way it is now (which is quite well) and I'd like to avoid doing that again. Plus, with MythTV, there's a lot of setup involved after installation which I'd like to avoid since it's correct now.
If there is a good way to clone the partitions to the new drive, a big thing would be that the boot sector has to come over too, or can be rebuilt without needing an install. I've had a situation where that didn't happen, and the result was a lot of wasted time and effort.
I am a brand new ubuntu user, heard lots of good things about it so thought I would give it a go on my laptop. However, I have tried installations of Ubuntu 10.04 (notebook version) and Xubuntu. Yet on both attempts to install the OS it has stalled at the "Setting up the clock" dialogue box, it just sits at 0% and remains frozen (mouse still moves etc but nothing happens).
I really want to give Ubuntu / Xubuntu a go and my forum trawling has brought nothing to light so far.
How do I migrate a system from one machine to another. By this I mean install a new system on a new machine then have a copy of all the settings etc from the old one copied to the new one.
View 5 Replies View RelatedUbuntu 10.04 64 bit
I ran following command to change username;
# usermod -c "Real name" -l new_username old_username
but forgot adding -m option to move the contents of the old home directory to the new home directory.
Therefore;
# ls /home
old_user_directory
how to fix it. /home is on partition /dev/sda3 NOT on root directory
I'm running Ubuntu 10.10
I have been running a dual boot system for a while now and I haven't logged onto the Windows side for quite a while. I'm ready to whack it.
What I want to do is get rid of sda1, sda2, sda3 partitions(all Windows related) - migrate my Linux install(sda5) to a Primary partition, migrate the swap out of the extended partition, and then make everything else my "data"(ext4) partition...so basically go to 2 primary partitions and a swap.
I know how to ultimately get to my one big "data" partition, but the part I'm not so sure or comfortable with is whacking the current Primary partitions and migrating the Ubuntu install to the new primary partition.
Device Boot Start End Blocks Id System
/dev/sda1 1 13 102400 de Dell Utility
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 13 1926 15360000 7 HPFS/NTFS
[Code]....
Since it has been announced that 11.10 will likely ship with thunderbird instead of evolution, I now am wondering how i am going to migrate my mail spool to the new application.
Is there a migration/import utility to transfer mail/contact/settings from evolution to thunderbird?
I currently use Xubuntu on a dual boot system, a laptop. The hard drive is to small (30 GB shared between Xubuntu and windows), so I want to clone the existing drive, but I do not want to clone windows.
I bought a 120 GB hard drive, and want to dump windows totally. If I download clonezilla and burn it to a cd, can I instruct it to only clone the Xubuntu system? I think I would run clonezilla from a cd, download everything to my USB drive, then remove the small hard drive. Then, install the bigger drive and restore everything to the newer and larger drive. Will this work??
Is there any means of converting a VMware VM into a KVM VM? If there is no direct way is there a KVM tool that will convert a running system into a KVM VM like VMware has? If that exists it would be possible to run it on a VMware VM to produce a KVM VM?
View 14 Replies View RelatedI have Fedora on SATA HDD 80Gb.Now I want to move all partitions to the 500Gb one.Some of partitions will remain the same size, some will increase. I tried that with Paragon Hard Disk Manager,but after it was done I found a problem, that they can't pass fsck checkup.It says something about cross linked files and on the root partition it failed at all with warning something about bad superblock.what is the easiest way to move to the big HDD? What soft should I use? Maybe it's sufficient to boot from CD, create new partitions and copy all files from source partitions to destination ones?
View 3 Replies View Related
