I'm having two distinct Grub boot errors with Ubuntu 9.10, stemming from two different setups. Anticipating that I'll be asked I ran BootInfoScript on both setups. This is the first setup, where I put a Flash ROM card in the Flash ROM port in front of the computer. This setup will not boot at all, and I get a message something like "Insert appropriate media and try again."
[Code]....
I installed and then reinstalled UBUNTU 11.04 /x86 server into clean HDD1. It was done however with errors and boots in console tty mode
After the last installation there was message regarding 4 errors
Then login prompt.
Configuration:
Intel Pentium 4/2,4 MHz, 512 RAM
Graphic card GeForce 4 MX440 /AGP8
2 HDD (HDD0- 230 GB Windows XP+GRUB, HDD1-180 GB UBUNTU 11.04)
CD ROM Plextor, FDD
GRUB boot to UBUNTU
I've had a lot of success over the past year with Ubuntu 10.4; however, recently I've been experiencing nothing but problems. It all started with an upgrade a month ago that caused me to experience a boot error. Now every time I re-install the system, I will have a random boot error. I have been trying to install the system on a friend's computer and getting the same thing. I've tried a different download and burned different discs, but I am still experiencing problems with the system having a boot error. Sometimes it is immediate after installation and other times it might boot fine for a day or two and then suddenly it will no longer boot. Is there some kind of bug with 10.4 now? I never, never had this hard of a time with Ubuntu. I've installed it on several computers for myself and other people.
View 1 Replies View Relatedi'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.
the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.
I'm trying to create a dual-boot system, and have been following the instructions here. However my hard disk has bad sectors, and GParted won't let me resize the Windows partition. It tells me to use ntfsresize with --bad-sectors as an option, after having done some checks, all of which I've done. I've successfully shrunk the NTFS volume in this way -
when I boot into Windows, it says the hard drive is the size I set it at. However, the Ubuntu installer and Gparted still see the Windows partition taking up the entire hard drive. So, for the installation, do I have to set the size of the volumes manually, or is there a way to make Ubuntu see what ntfsresize has done?
New to Linux and am wanting to install ubuntu 9.10 or 10.04 on a single separate 80gb drive. I have Windows installed on 2 80gb drives in Raid0 (nvidia controller) .I have installed 9.10 but Win7 will not load from the bootloader : gives me the error invalid signature. I've looked around and tried a few things to get it to load with no success.. is the Raid0 the issue?
If I try to install 10.04 it will hang and eventually errors out, I believe on the raid drive because it comes up with dev/mapper/nvidia_hhfbdccf1..
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
I've installed Debian Lenny from USB with the small 8MB netboot image. I only chose "Standard system" in Tasksel during install, to get a clean, minimal install. I also chose for LVM and a separate partition for /home. I have one 1.5TB SATA drive in this machine.
Now everything seems to install just fine, but when I reboot I get the following error:
fsck.ext2: No such file or directory while trying to open /dev/sdb1
I get offered to enter a maintenance shell, or press CTRL-D to resume booting. When I do, the system boots fine and nothing seems wrong. But it is inconvenient, because I can't reboot the machine without physically going to it to press CTRL-D on the keyboard
I have googled for this error and it is mentioned on several forums, but they were all related to other things specific to their installs/machines.
(ps. the only slightly strange thing during install is that the Debian installer included my 1GB USB thumbdrive when it shows all the drives and the partitions before formatting. I removed the USB thumbdrive directly after install, but if I plug it in, I still get the error)
These are the errors during boot:
code....
I've only installed Debian on my laptops, which never had any problems.
I have a 10-year-old desktop computer with Windows XP on one drive and Ubuntu 10.4 on the second drive. The first is an old IDE disk, the second a more modern SATA drive. Tried to boot Ubuntu, and got a lot of arcane i/o errors that I am sorry I can't repeat verbatim but there was something about unable to read sector this or sector that, among other things. I thought maybe the drive was hosed. Tried booting into recovery mode to see if I could figure anything out but it was too geeky for me. Then I tried rebooting Ubuntu to see if I could look at the errors again but now the system insists on going into recovery mode.
Then I tried booting windows, which as I mentioned is on a different physical drive. The MS logo comes up and then it reboots spontaneously and we're back where we started. Any ideas? Should I suspect the second drive is seriously damaged, or could there be some problem with the motherboard?
I have a relatively new computer that won't boot Win 7. After going through a lot of tries, I got a suggestion that I try to boot using Ubuntu from a USB flash drive ( since I can't burn a CD).
I followed the procedure to put the necessary files (Version 10.04 64 bit if I recall correctly) on the drive and tried to boot using it.
I got this message:
When I tried to boot again (from the above) I just got the second message (No DEFAULT etc.)
i just built a new ubuntu 10.04 system for my mother because her windows machine died. I was wondering is there anyway i can get here email address and stuff from outlook onto Evolution. i have the old harddrive in a external box via usb, so i can get to the files. i can not boot from that drive because windows has seriouse errors in it.
View 1 Replies View RelatedI have several NFS entries in my /etc/fstab file. Each entry generates an error during boot (from /var/log/boot.log):mount.nfs: DNS resolution failed for macpro.dpc: Name or service not known mountall: mount /mnt/BaseLines [656] terminated with status 32
This occurs even if I specify an IP address in fstab rather than a host name. I was really surprised by that. The odd thing is that by the time the system is up, not only is DNS working as expected, but the NFS shares are mounted as expected. I'd just ignore it for now, accept that it prevents Apache from starting since some of the server's files live on the NFS shares (this is a development system). It appears that the DNS resolver isn't running when the mounts are attempted and that they are attempted again later, after the resolver is running.
I did an
$ sudo apt-get update
$ sudo apt-get upgrade....
What would prompt this? i shut off teh computer and turned it back on , didnt press any buttons and it started checking my drives, so i pressed C and cancelled it.
View 1 Replies View RelatedI have partitioned my HDD to three parts and installed Windows 7 and then Ubuntu 11.04. After a while I installed Hackinosh Snow Leopard grub was not there and whenever I tried to boot to ubuntu from Chameleon bootloader it showed an error and told to press Ctrl+Alt+Delete to restart! I have already tried to restore grub from a Live CD but nothing!
View 2 Replies View RelatedThis is what my computer looks like while it's booting. Gdm pops up shortly, and I can use my computer with no problems. More recently, I screwed up something in gdm, so I can't do anything with my ubuntu computer.
View 3 Replies View RelatedSince installing debian 8.2 I have had a list of errors appear during the boot, I get the usual Loading, please wait message then a series of random errors.I think I am stuck in initramfs, then typing exit resumes boot. Should I be concerned and can I jump straight into the login screen without typing exit each time?
Here's a photo [URL]
I installed Virtualbox ose on fedora 14 I686 latest version. then when I rebooted the computer,I see 2 errors that Virtual box client not found.
Then Fedora will not even get to the login screen.it hangs at ada.
Do you know a way to know what's up at boot time?? Before that the sistem is ready to "be used" there are some "errors" I would like to solve. Besaides, the "/var/log/boot" file is empty.
View 2 Replies View RelatedI've made a CentOS 5 x86_64 setup last year, around november/december.This system is supposed to operate as a home router/gateway, firewall, nas, small intranet/extranet server and media center.I've previously built a system using older parts (Pentium III 866MHz), and had on it CentOS 5 x86.It successfully served the same purpose (except nas and media center) for quite some time, about 1-2years, until i felt i needed better hardware (more memory, speed and disk space mainly) and 64-bit support.
Part of this intended setup isn't finished (router/gateway, firewall, media center), partially because i'm still lacking a good 1000mbps switch and a supported wireless n 3-antenna card in AP/server mode.In the previous setup, i had router/gateway, firewall and small intranet/extranet server working, with a crappy 100mbps switch (the switch is broken now).the new setup has run pretty well, it had been upgraded 2 times, etc...But since it has been installed, even before any updates, upgrades or repo additions, there has been always warnings/errors during kernel boot.I'm listing my specs, configs, versions and logs bellow. all the partitions, RAID and LVM were created during CentOS initial setup.
Hardware:
Case:1x Cooler-Master CM-690 II Advanced (RC-692-KKN2)
PSU:1x Corsair VX450W (CMPSU-450VX)
[code]....
I have updated to ubuntu 10 and with it the new version of grub. My windows is not booting up , when i select windows xp from the menu i get a black screen and nothing ever happens, no errors , no mesages. I found this problem a lot on the internet but i no solution yet.
View 8 Replies View RelatedMy problem, GRUB loader appears when it normally did not and Ubuntu fails to boot. My story, I installed ubuntu on a HP Touchsmart laptop a month ago because I was having troubles with Windows and... well I just wanted to install ubuntu. All goes well until a week ago when my sound was permanently muted through a hardware switch and ubuntu was not detecting it. I tried hitting the button on my laptop but nothing worked. Soo... I tried resetting my BIOS in hopes that it would fix it. I set the bios to its defaults and booted. This is where it got weird. the GRUB loader appeared when it normally did not and upon booting, a black screen with flashing cursor would show up and then... nothing. I changed the bios settings back to what they were and still nothing.
I have removed the silent boot from the GRUB boot line and can see whats going on... a little, the last thing it shows is "Running /scripts/init-bottom ... done." annnd nothing else. When booting in recovery mode it stops after 30 or so seconds on...
Code:
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp
and just ends on that line. the previous line shows closing the Lid as a button.
I have tried booting into a live USB (as the laptop has no cd drive) and everything works fine.
how the BIOS would be related to GRUB/booting..
Debian 8 faild to boot normally, thowing several screens of error messages. Then it suggested to enter root pw and do some maintenance, and upon accepting my root pw it booted me into command line.I guess, those screens of errors are saved to some log files - if this is the case, in which files shall find it?I tried:
/var/log/syslog - an endless file, yet the records end at 28/12/2015
/var/log/dmesg - same
/var/log/boot.log - not there
I've run today command: "sudo yum update"
and I've noticed that the new kermel have been installed (2.6.31.12-174.2.3.fc12.x86_64).
After that installation .. my camputer has several errors while booting and it doesn't want to start. So while booting I can see Code...
I get heaps of errors from Okular saying that /tmp/kde-luke/* cannot be opened. I think it is doing this because I downloaded files from Firefox and opened them then closed firefox before closing the pdf files. I have tried uninstalling a purging Okular deleting the applications stuff in my home directory but it is still obsessed with these files. The only way I have been able to stop these annoying pop ups is by having the application uninstalled or running a starup script that will create these files on boot.
View 2 Replies View Relatedi upgraded my netbook to slack-current (32bit) and now When booting up dmesg shows these errors:
Code:
[ 10.770199] [drm] detected 63M stolen memory, trimming to 32M
[ 10.770267] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 10.770280] [drm] set up 32M of stolen space
[ 10.770468] [drm:init_ring_common] *ERROR* render ring head not reset to zero ctl 00000000 head 02001000 tail 00000000 start 02001000
[Code]....
This happened with generic stock kernel and is also happening with 2.6.36.2 zen kernel. Is it something serious? Kde compositing still works, except it locked up few times when i was testing how windows wobble in kde, but not recently.
My box is centos 5.3 x86. At booting, ipsec_setup messages are coming as attached picture.
And dhcpd also comes "failed".
Not sure on what is going on here. The server is RAID1 through hardware RAID. It was running an unusual high load so I rebooted it. Now it won't boot up. I am getting these errors after the CentOS boot screen:sda: Current [descriptor]: sense key: Medium ErrorAdd.Sense: Address mark not found for data field
end_request: I/O error, dev sda, sector 3040555357
device-mapper: raid1: A read failure occurred on a mirror device.
device-mapper: raid1: All sides of mirror have failed.
[code]....
I',m executing ping, but it didn't work, in order to find the mistake in my network I would like to know how to see the errors:
Code:
18 packets transmitted, 0 received, +12 errors, 100% packet loss, time 17038ms, pipe 4 I want to see this +12 errors. Could I do that?
I'm having some problems with errors reported by fsck on my EXT4 root partition on my Ubuntu 10.10 installation... If I run fsck I get the following output:
Code:
# fsck -n /dev/sda1
fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
Attenzione! /dev/sda1 montato.
[Code]....
Every time I boot 10.04 on my laptop, the file ~/.xsession-errors is created.
I post here the content of my ~/.xsession-errors and the output of dmesg:
NB: I'm running 10.04 on a Dell laptop m101z.
~/.xsession-errors: