I was wondering if I can tri boot Win 7, ubuntu, and fedora. I installed windows7 first, then ubuntu 10.10, and thinking of ferdora. I am and using the windows boot manager at the start up. So, do you think I could just install fedora and my system will be fine?
View 6 RepliesI have installed fedora 12, now(after one week) I updated fedora 12 using the command, ' yum update'. Its updated when I restart it is showing two fedora 12 booting option along with windos7. how to remove one. But all the options are working, I am pasting the menu.lst file below.
Lokesh
[root@Lokesh Lokesh]# cat /boot/grub/menu.lst
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, e.g.
# root (hd0,4)
# kernel /vmlinuz-version ro root=/dev/sda6
# initrd /initrd-[generic-]version.img
# boot=/dev/sda .....
I cannot get windows 7 to install with my DVD its damaged, I have an iso downloaded and was wondering if there any tools that I can use from inside ubuntu 10.04 to get it onto and boot from a usb?
View 10 Replies View RelatedI successfully installed windows 7 and ubuntu 9.10 and both working great together, after a while and installing some programs in ubuntu like pysdm and ntfs-3g. I even logged out and in several time successfully. But when I shut down the pc and open it again, the following two errors show up:
init failed to spawn mountall-shell post-stop process:unable to execute permission denied.
init:job-process.c 529: unhandled error from job-process-spawn permission denied.
My windows 7 still working but what about ubuntu. My volumes are Ext4.
Until very recently I was running Ubuntu 9.10 (Karmic Koala) installed on a 20 GB hard disk and Windows XP (SP3) installed on RAID 1 array of 2 x 250 GB disks, very happily along side each other and using GRUB as the bootloader installed on the smaller 20 GB drive.
I have decided to upgrade to Windows 7, and was struggling with the installation failing with the seemingly quite common "Setup was unable to create a new system partition or locate and existing partition" error. Google seaching suggested unplugging my Ubuntu drive and then installing Win 7. This worked fine with the Ubuntu drive unplugged, however with the 20 GB plugged back in I can boot to GRUB, but it still has XP in the menu, and no option for Win 7.
I think I could get around the issue by re-installing Ubuntu, which would place GRUB on the MBR which is now on the 250 GB RAID 1 array, but I would rather have the system as it was before with GRUB and Ubuntu on the 20 GB drive.
I know I need to edit GRUB to remove the XP entry from the menu, but I have no idea how I would get Win 7 into GRUB, and what to do about the MBR which Win 7 put onto the RAID 1 array.
I can dual-boot on my PC by using my SATA drive for Windows & a second IDE (PATA) one for Ubuntu.However when I try to install both OS's on the Primary SATA drive side by side only one is detected (and I have no option to boot the other).
I have a friend with the same problem who is trying to boot Win7 and Ubuntu off the same SATA drive and the same issue occurs on his (He doesn't have the second drive as an option as I do).
Does anyone know a way to get side by side installation to work on one (SATA) drive? Failing this is it possible to boot Ubuntu off and External hard drive and still be able to dual boot Windows & Ubuntu?
Just installed Ubuntu 10.10 onto my new netbook from a USB stick. The laptop came with Win7 Starter, which I kept on a small partition. Installation was apparently successful, but when I start up the computer, it will go straight to Win7 and GRUB doesn't appear.
View 9 Replies View RelatedI had vista installed, then I installed Win7 on a dif. partition. Then I installed Ubuntu 11.4 over the vista partition (formatted first), and now I can't get into Win7. I'm really at a loss. I've tried the Win7 disk, and it doesn't detect the Win7 installation. I've also tried sudo update-grub, and it doesn't seem to detect the win7 install either. I've tried making the Win7 partition bootable using gpart as well. I'd like to dual boot Win7 and Ubuntu, however I need to do that.
View 9 Replies View RelatedI had reinstalled ubuntu 10.10. When opening computer grub menu load and i can boot ubuntu and windows 7 listed on grub but when i tried to boot show me a black screen and showing grub menu again. I can't open Windows.
View 6 Replies View RelatedI have windows7 installed on a single partition 500 gb hd. i want to install ubuntu as dual boot. (i have done this before but not with win7.) can i go into disk management and reduce the win 7 volume by say 50 gb. format it fat32 and install ubuntu. and still have dual-boot? thanks in advance. i plan on using either ubuntu 9.04 or 9.10.
View 2 Replies View Relatedi installed ubuntu after windows 7 but now i cant boot windows 7 i tried the start up repair and I've read through some questions answered on here and int figure out the problem i don't want to uninstall ubuntu unless it's my only option
View 9 Replies View RelatedGot a HP dv6-3019wm laptop yesterday and my attempt to dual boot has gone up in flames. I first followed the tutorial [URL]
I might have gone wrong by accidentally making the hard disk 'dynamic' after shrinking the windows partition. Upon booting the computer up after the 11.04 installation, Win7 gave me a 0xc0000225 error. The built in hard drive recovery didn't work and neither have multiple win7 64b recovery disks I have downloaded. A gparted live cd wouldn't boot. On attempting to reinstall 11.04 (so I can just get rid of win7), the installation freezes when it tries to recognize the state of my hard drive.
I've basically turned to dban, but that won't even work. The latest version gives me an error of "no configuration file found" and 1.0.7 give me "non-fatal error", even when I attempt to auto-nuke.
Am I out a hard drive?
I m duel booting slack and kubntu. and i want to install win7 for my internet connection conflagration. i fist installed slack on my 160 hdd and then i installed kubuntu, and that was easy cause ubuntu offered me to choose how much i space i want for it and thats it! it installed autometically. but now i want to install win 7 any idea how i m gonna do this ?
View 7 Replies View RelatedI just installed win 7 and now can't install fedira 13 on the partition that i made for it on the same drive. The problem is that after installation of win 7 i lost the ability to boot form cd. In bios i still have cd set up to boot first and drive second, but win 7 did something that overrides bios set up. I even tried Esc for boot menu, then i select to boot form cd, but it still boots in windows.
View 1 Replies View RelatedI just installed Win7 (I need it for work -.-") and, of couse, it installed its boot loader and I can't boot F13 any longer. The question is, how do I restore GRUB from a F13 live installation media without destroying Win7?
I remeber trying something like that a couple of years before when I had the same issue:
Unfortunatelly, that doesn't work and at the next boot I am stuck with Windows again how to restore grub from a F13 live CD?
I installed Fedora13 to dualboot w/ my windows 7. I quickly found out that I don't care for fedora. I was referred to Ubuntu, and put Ubuntu 10.04 on in VirtualBox. Lo and behold, I like Ubuntu a WHOLE lot more! So, I promptly went to Disk Manager (in win7) and deleted the Fedora partitions (told you i'm a noob). Of course that was a poor choice, and I was only able to get my computer to boot again by reinstalling f13. neat.
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
SO what i was thinking is go back to Disk Manager, delete partitions sda 3,4, & 5 (the linux ones), then reboot from the Ubuntu live disk? But I don't know what the sdb1 partition is?
I'm not exactly a newb (anymore), but I'm trying to get F11 to install in a virtual PC environment on Win7.
I'm installing on a tablet PC, so I want to do the virtual thing first, to see if Linux can handle the touch screen the way I need it to before I put only Linux on here. The problem I'm running into is that the install wants to default to "text mode", which isn't really a problem, but upon the first reboot, the graphics are all messed up, and I can't get the install to continue.
Is there a command line I can modify to use standard VGA settings during the install, but "redetect" the display settings when the install is complete and I'm ready to use F11?
I am a linux newbie, I have messed with it some (backtrack) but I don't know a whole lot. I am going to networking security and I am in a linux class now. We are using fedora. On my laptop, I want to triple boot. Right now I have just 1 partition, with windows 7 ultimate x64 installed. I want to triple boot windows 7, windows xp x64, and fedora 12 x64. I am getting ready to format my laptop now with xp installing first. Then I will do windows 7, and then lastly fedora. Do I need to do anything special while installing fedora last? I have a 300gb hard drive, and I plan on having 100 for xp, 150 for 7, and the remainder for fedora.
View 2 Replies View Relatedhow do i correct my boot loader after installing Win7 on the free space available. i still have my fedora 13 partition intact. but of course, fedora option is not available. how do i re-install grub using the rescue dvd? tried alrerady.
View 1 Replies View RelatedI am a major noob to FC12. I need to install Windows 7 Pro and FC12 dual boot. I first used the windows CD to create 1 250 Gig partition on my 500 Gig HD. Of course windows created the 100 MB system partition. I left the rest unpartitioned. Windows installed okay. I then booted to the KDE FC12 Live CD and installed FC12. I specified to use the Free Space remaining on the HD. The installation finished but now only boots into FC12 and does not prompt me for the OS I want to boot.
View 3 Replies View RelatedI have read a number of threads relating to the bootmgr missing issue but I can't seem to apply the fixes to my specific situation, any assistance is most welcome; my details below. I have two HDDs
1 x IDE HDD running Fedora 12 which is allowing me to write this,
1 x SATA HDD which has win7 premium 64-bit, and up until the Fedora 12 instal, was the only OS.
Grub gives me two options for boot, they are: Fedora Other When I select 'Other' I get hte message :BOOTMGR MISSING My assumption is WIn7 located on my SATA HDD = Other what I might do to allow Win7 to boot.
[Code]....
Im a newbie having the opposite issue that seems that everyone is having for what Ive seen, I have Grub on the MBR, showing the splash screen fine (the background image also), and allowing me to boot Windows 7, but I get a cursor blinking for the eternity when trying to boot Fedora 13.My hardware is:
Quote:
-ASUS M4A89GTD PRO (AMD 890 FX AM3 Chipset).
-Phenom 965 BE.
-4Gb RAM.
-3 x 250 Gb SATA Hard disks, first one alone for OS, and the other two in fake RAID1.
-1 x 80 Gb IDE hard drive containing trash.
-RADEON HD 4870 1Gb Graphic Card.
-RME HDSP 9632 Soundcard
[Code]...
I'm trying to dual boot F14 along side of Win7 and I'm running into partitioning errors - "Could not allocate requested partitions: not enough free space on disks" I used the Win7 Disk Management to shrink the C: drive by 100G, and the Disk Utility in F14 shows the unallocated space. Here is what the current layout looks like:
--210Mb bootable (sda1)
--168Gb (sda2) --Win7
--105Gb unallocated -- Future home to F14
--31Gb extended (sda 3) -- not sure what this is used for
--31Gb (sda 5) -- Lenovo drivers
--16Gb (sda 4) -- Lenovo restore
Am I running into the partition limit I have been reading about? If so, is there a way to get around this? I really don't want to delete the partitions yet.
I had a dual boot working fine with XP and F12 on two physical drives, all was well. Last night my friend helped upgrade my system, I now have 3 drives (20gig F12) (60gig XP) and (320gig Win7) now the PC only loads Win7 as I think my friend told bios to boot from 320gig. Has anybody here got experience with triple boot from 3 drives? Here is my guess, tell bios to boot from other drive and add Win7 to grub. Not sure how but that's my guess. Also what worries me is that win7 does not "see" the other two drives.
View 5 Replies View RelatedI just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code:
fdisk -ls
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....
I have Dell Laptop 1545 which already installed windows 7 home premium which is also having two partitions one is reserved by the oem and another is for recovery partition and another 200gb i am using for windows 7 now i have left only 80gb hard disk. So I started to install the Fedora 12 in my laptop every thing is going fine but
at the time of creating the partitions iam unable to allocate the partitions the left 80gb i tried to select and tried for custom partition but to my surprise it is giving the following message "Could not allocate requested partitions: not enough free space on disks"
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I downloaded the minimal boot image and installation CDs for F12 i386. On booting either I get the following messages:
Code:
This kernel requires the following features not present on the CPU:
cmov
Unable to boot - please use a kernel appropriate for your CPU
Looks to me like the installation media for i386 doesn't have an i386 kernel! I'm trying to install to an i586 CPU.
I try to install Fedora 11 from DVD BUT after installation system is not booting. Windows XP is a 1st OS is already installed in my system.
View 1 Replies View Related