I'm trying to perform an install of F14 (fresh install over F13), and it has been showing "running post-installation scripts" for 1 1/2 hours now. I am wondering if this is unusual and what the implications might be of power-cycling and rebooting. I'd note this is a fairly fast machine with 2 quad-core Xeons (I forget their model number).
View 1 RepliesI'm using couple of Intel Core i7 based workstations. Here is one such example:Processor: Core i7-870 (Lynfield) Motherboard: Gigabyte P55A-UD6RAM: Corsair DDR3-1600 - 8GB (4 sticks). Graphics: Sapphire Toxic ATI 5850 - 2GB - DDR5Am always used to 32-bit Linux installation. Now I would like to go with the FC14 64-bit on this workstation. My question is:a) How different would be a FC 64-bit compared to 32-bit (8GB RAM issues I faced in Windows 7 32-bit)b) What would be potential problems during the installation and/or post installation. I get these questions in my mind because of Motherboard and Graphics card support and also thinking about applications (issues) on FC14.
View 4 Replies View RelatedI am trying to install fedora 10 kickstart on my server.But I can't, because my kickstart installation hangs at post install scripts.It is not showing any message & stopped.
View 1 Replies View RelatedI put a script into the post installation of kickstart and the log showed that the yum that is started in the script had to wait for yum to finish. I understand I can (and will) put this package in the packages section, but isn't it bad that yum is still finishing up when the post installation is initialized? Has anyone else noticed this?
View 2 Replies View RelatedStill having problems with the locked black screen freezing a couple of minutes in. I've done everything anyone has recommended on the other threads but nothing and it is driving me crazy. Please, does anyone have any ideas? I tried to install xfce4 but of course, screen froze and went black before I could fully download the software! I've tried the nomodeset but can't save it before doing a reboot (then went via terminal as quick as I could on start up to edit grub, but then... yes, it fell over and froze before I could hit save). So I'm giving this a lot of time I really don't have... such a shame I upgraded, 9.10 was working so well... alternatively,
View 1 Replies View RelatedI just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
Being a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
I get this error whenever trying to update or install applications:
Quote:
E: sun-java6-plugin: subprocess installed post-installation script returned error exit status 2
What can I do here?
Everytime I attempt to install anything, in any way, I'm given the following error message:
E: lib32nss-mdns: subprocess installed post-installation script returned error exit status 2
E: wine1.2: dependency problems - leaving unconfigured
I went into Synaptics Package Manager and told it to uninstall WINE in case that was what was causing the problems. It sort of half-uninstalled-it then gave me that exact same error message.I have two threads currently open on the forums - adjusting laptop brightness and flashing BIOS - and both problems hit a brick wall because of this same error message.
i am trying to dual install fedora 14 alongside my current windows 7 home premium 64-bit. the main issue that i am having is when running the DVD you cannot see anything on the screen during the installation process so i can't see what i'm doing. other than that the DVD works correctly as far as i know. i have downloaded the iso twice and burned two separate disks and have had the same problem with both disks.
View 2 Replies View RelatedI installed Fedora on IBM desktop PC with 40 GB. During installation I only created Boot and swap partitions and remain 30 GB as free space and now I want to create partitions from 30 GB free of Harddisk and I do in Windows XP and use Administration TOOL and create an other partition. so How I can create partitions on fedora after completed installation of Fedora Desktop. Need steps of post harddisk partition tool in Fedora.
View 5 Replies View RelatedMy system is Dell 4300S with 1.4 GHz Pentium processor, recently upgraded to 1 GB RAM,120 GB WDC1200JB hard drive Sony DRU-720A DVD/RW drive, ATT plugandshare wireless adapter with Atheros AR5001X chip, ATI Rage 128 Pro Ultra TF video card, and Actiontec V90, and 56KFlex modem (Agere System Venus). I attempted to use preupgrade to upgrade from Fedora 12 to 14 using wireless connection. It seems, that upgrade finished successfully, except I am not unable to get to a GDM login. I updated SElinux to selinux-policy-3.9.7-10 and selinux-policy-targeted-3.9.7-10, and touch /.autorelabel overnight, I was able to login using GDM once. And that is all. After I boot, after Ctrl+Alt+F4, I can login to terminal.
[Code].....
I recently upgraded to Fedora 14 from F13 using Yum, it worked to my amazement except now yum appears to be broken because of a massive amount of dependency issues. It appears the old F13 packages are still around and yum is unable to get ride of them because their dependency with F14 packages of the same name. I tried yum distro-sync, and I tried yum resolvedep $(package-cleanup --orphans) --skip-broken but to no avail. Package--cleanup--orphans identifies all of the left over F13 packages.
I also can't install or upgrade anything using Yum, does give me a reason except the massive amount of dependency issues with the left over F13 packages. When I use the graphical software update it tells me among other things that Yum and RPM have updates but of course it won't update. I did follow the instructions and used yum update yum before I upgraded to F14, maybe it didn't take? Anyway to resolve this issue other than a clean install?
I just set up Fedora14 on a PC in order to use it as an Amahi home server, but missed the step about adding the Amahi software repository during installation. I am looking for a way to add this repository.I found a support site that should show how to do this here:
[UR]
The first step is: 1. Create /etc/yum.repos.d/amahi.repo as root user I open a terminal, log in as root and enter "/etc/yum.repos.d/amahi.repo", and get the response No such file or directory.
1. Is post installation of the Amahi repository on a completely fresh Fedora14 a viable solution?
2. My experience with Linux/Fedora started yesterday evening - Is it possible to get a newbie proof explanation on how to perform the post installation?
I am pretty new to Linux OS's, but I have gone through the process of installing linux onto several of my system already. The problem I am having is when I attempt to install Fedora 14 onto my Unbuntu 10.10 (erasing Unbuntu to be specific) I am stuck at the Post-Installation process.
I am using a CD-RW to install Fedora onto my Ubuntu, and I installed Ubuntu onto the computer originally with another CD-R.
I assume this usually takes a few minutes, as the pop-up says that it may take several, but it has been several hours with no progress. I was pretty far into the installation when the pop up appeared, and it said:
"Post-Installation: Performing post-installation filesystem changes. This may take several minutes.".
As I said, it has been several hours.
I have installed Fedora 12 on a brand new pc, quad core, 4 GB RAM. Within 1-2 minutes after I log in, the computer stops responding. I can move the mouse and click on, but it is too slow, and the cursor drags.
Running Top shows that Xorg takes 80% of the CPU.
I upgraded a machine this morning from 9.04 to 9.10 and it went off without a hitch. I then began another upgrade from 9.10 to 10.04 and it appears to have hung. Everything worked fine up through getting new packages, but when installing the upgrades; it got to Unpacking replacement javascript-common ... it opened a terminal window and stopped. It still says about 20 minutes remaining but it's been saying that for about half an hour. Is there any way I can get it to resume? What do I do now?
View 3 Replies View RelatedI am setting up a fresh Fedora 10 install on an older computer for a roommate and have one odd little problem, everything else appears to be working just fine.
The network connection drops after about 2 minutes (somewhere between 90-120 seconds). This only happens in the installed Fedora 10; it does not happen at all when I boot a Kubuntu LiveCD.
Here's what I know:
The machine is a Dell Dimenision 4500, 2.0 GHz, 512Mb ram.
The ethernet card is 21x4x DEC-Tulip compatible 10/100 Ethernet.
Unplugging the ethernet cord and plugging it back in allows the network interface to come back up, grabs the right IP, but only holds it for another two minutes.
ifconfig and route show all the right info while the connection is good, but inet disappears once it goes down.
'ifdown eth0' and 'ifup eth0' do not bring it back up.
Is this a driver issue perhaps?
I tried running an upgrade from 8.04 LTS to 10.4 last night, and things seemed to be going smoothly. The upgrade progress was nearly complete, and I wandered off for a while to let it run. When I came back, I had nothing but an orange screen and and unresponsive system. I left it alone all night with the hopes that something would happen, but this morning nothing had changed so I hard restarted the system.
Ubuntu 10.4 appears in GRUB, but the system cannot boot and exits with a kernel panic and the message "vfs unable to mount root fs on unknown-block" I was able to boot to a 10.4 LiveCD, and I can browse all of my files from there. What can I do to get this system back up an running? I have dozens of user account and a lot of customization (it acts as a webserver with a wiki for a gaming website running on it, among other things), so I really really don't want to do a fresh install and lose all my data and customizations.
I have a little (well, don't think it's easy to solve) issue - my computer stalled at irqbalance (set up), /etc/init/irqbalance.conf (installing, but hung up).
So, my question is what to do? Should I just push the button for 6 seconds, unplug the power cord, or what? It's been like this for 5 hours, I thought it'd go away, but no. Of course, I'll leave it for night, but there has to be a way out. I don't want to reinstall the whole OS, I have lots of programs (and files, actually, too) in there. So, if you know what's the reason and how to deal with it, please tell me. Thank you. I know there are many geniuses in there. I launched updater yesterday, oct.3, and pushed install button only today.
I used the upgrade manager to update to Ubuntu 10.10. It hung on installing grub. After trying the repairs, the system says it can't find grub_xputs and gives the grub rescue> prompt.
View 5 Replies View RelatedI am attempting to get beyond my grub> as it has hung up there after trying to update my Samsung netbook from 10.04 to 10.10. I have found some answers but a basic question is where do I load grub from a livecd to the mount point where I have already installed my Ubuntu I have attached a screen shot of my partitions on my 160 gb hd and hope it can be opened?
View 9 Replies View RelatedI performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies View RelatedI wanted to reinstall Ubuntu , so I took my iso of Ubuntu desktop 10.4 LTS and followed these directions [URL] Under create usb stick and ubuntu , but when I went to boot from it after restarting, it hung for like 10 mins at the Ubuntu Splash screen. I'm not sure what is wrong , it worked fine when I installed it on windows
View 9 Replies View Relatedtrying to install Fedora 10. I'm novice in linux. Nut tryed some distros before, installation/config, fedora 9, Ubuntu 7-8, Suse 10, mandriva. everything was ok. Now i've new rig:
1 DVD install i386 after booting asks me media from where i want install errors: CDinstallation: No Cd drive with installation media HDD installation: can't find boot image (NTFS C: in winXP). 2 DVD install x86_64 same. 3 NetBootCD 2.2. installed on flash with liveusb-creator. once booted (most progress with this one), started formating process, asked root, after again showed me that no media. after again tried to install on USB error "no boot media on POST screen". 4 Billix downloaded USB version, pated on USB stick edited file , changed mirror from i386 to x86_64 can't boot even. 5 Downloaded fedora 10 Live Gnome desktop slipstreamed onto usb stick with liveusb-creator. booted: showed GRUB boot many. choosing boot or verify and boot fedora three lines on boot loading, after it shows me my Ethernet connection like "100mb full duplex link ready" after nothing only this text stays on desktop.
I recently got my hands on a brand new Packard Bell EasyNote NJ65 laptop which comes with Windows 7 Starter and I wanted to give it a try with Karmic Koala, since my old laptop (Compaq Presario F564LA) could run it with no problems.
When I tried to install or even, to run the LiveCD the computer just freezes. Simple as that. I've tried any posible solution but so far, I've been all out of luck. A quick round of Google searching has failed to provide any answer to my question, so that's why I came here.
I have some free space (not partitioned) on my disk drive. I have not configured LVM during installation.Is it possible to modify some of the existing partitions to be a member of LVM?
View 4 Replies View RelatedBoth on a 10.04 and a newly installed 10.10:After BIOS post, I get no grub and just a blinking index in the upper left. I've left it for hours, never boots.How can I resolve this without getting any Grub boot options?
View 5 Replies View RelatedOS: Windows 7Problem: Want to dual boot Ubuntu and Win 7, but OS screen won't show after POST.I need some assistance in installing Ubuntu 10.10. This would be my first Linux installation, all I have done otherwise was virtualize Ubuntu 9.10.I have tried installing two times now but I can't get the boot screen to pop up for when I dual boot and check my OS.So here is what I did, not ever partitioning a drive before for duel booting:1. Go into Disk Manager and shrink the volume of the main HD by 25GB (I was going to use this for Ubuntu)2. I then inserted the Live CD with Ubuntu 10.10 on it and proceeded to install, however when choosing where to install it, I chose the advanced options and chose the partition that I set aside as free space for Linux (25GB -- 25600MB).
3. I set the boot loader to this partition, as the other partitions are the w7(windows 7) loader and the label of the HD. The partition was labled dev/shd5 or something like that. But when I am done installing and try to boot normally the screen where I am to choose which OS to boot does not appear.Question:What should I do to dual boot? I also tried selecting boot alongside another (or similar) and set the same settings as using the dev/shd5 free space that I allocated (25GB) and placing the boot loader on the same partition, which is not the main partition.I do not want to overwrite the Windows Partition as I have things on there that I will need,
I have created a customized RHEL 5.4 DVD and placed a Kickstart file in it.It is running fine except the post installation steps.I need to copy some files from DVD to the newly built server. For this I have modified my Kickstart file as below, but no luck.
View 3 Replies View Related