Ubuntu Installation :: Startup-Manager Can Break Nvidia Drivers
Aug 3, 2011Using Startup-Manager to change your startup screens,etc. can leave you with no gui on next boot:URL...
View 7 RepliesUsing Startup-Manager to change your startup screens,etc. can leave you with no gui on next boot:URL...
View 7 RepliesI attempted to install restricted drivers using jockey-gtk, was told to reboot and drivers would take effect. Rebooted and got no graphics, after some finagling I was able to delete xorg.conf and I now have horrific looking graphics. Defaulted to current version or 195 (which is also the only option I see in the jockey tool, however in synaptic/apt I see I can install other versions.
View 5 Replies View RelatedI installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?
View 1 Replies View RelatedI just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
View 5 Replies View RelatedI can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
I have got to install nvidia 260.19.12 drivers in ubuntu 10.10 64 bit. I have got a GTX 460, so I think these are the right drivers [URl]..The question is: how do I download and install 260.19.12 drivers? I would need a step by step guide, because I'm not familiar at all with Ubuntu, so it can be difficult for me, even if I will try my best.
View 9 Replies View RelatedAfter installing I could not boot. In reading several posts I came to the conclusion that I needed nVidia drivers. I installed v173 nVidia drivers & after a few tries got it to boot. But, not somethings didn't work, like Hardware Drivers, Synaptic Package Manage wouldn't search & some software wouldn't open. I tried to update in terminal sudo apt-get update, then sudo apt-get upgrade (I did this before installing v173).
It says:
dpkg: dependency problems prevent configuration of nvidia-glx-173:
nvidia-glx-173 depends on nvidia-173-kernel-source (>= 173.14.20);
However:
Package nvidia-173-kernel-source is not configured yet.
dpkg: error processing nvidia-glx-173 (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
nvidia-glx-173
Do you think if I do an upgrade from 9.1 to 10.04 and then add i915.modeset=0 ( works with the live CD) to the boot sequence and then load the proprietary NVidia drivers from sys/admin/hardware drivers, that I'll get full screen resolution.
BTW if I don't use the modeset=0 I get a blank screen after update reboot.
I'm installing 10.4 fresh but I can't get the Nvidia drivers installed. I'm using a 9400 GT. Ubuntu installs normally but when I try to enable to the proprietary driver, I get an error on reboot "Failed to initialize NVIDIA graphics device" and have to restart X. Any suggestions on how to get this working?
View 9 Replies View RelatedSince 2 weeks now i decide to roll back to my favorite Ubuntu OS.Of course i kept the windows for my creative suite of Adobe that i am working on.So, i downloaded and installed Ubuntu 10.04 LTS and everything went ok.(Even the dual boot with grub).Then i tried to install latest nVidia drivers and after reboot the max.res. i have is 640X480X60Hz. My composition is Intel P4 2.8 --- Gigabyte PE8100 --- GeForce 5700 FX The monitor is Philips CW220 22". I tried many of the guides of Ubuntu forums and some of them made my system unfunctional and some other had no result.
View 1 Replies View RelatedI recently updated to 10.10 and ubuntu will not regonize my NVIDIA drivers. Under apperance "no effects" are filled in. When I try to enable effects it searches for a while but then tells me "Desktop effects could not be enabled". Thing is "NVIDIA x server settings" tells me everything is okey. I tried updating to the latest NVIDIA drivers manually but the problem persists.
View 2 Replies View RelatedI use the sleep function on a timer. Unfortunately recently it has become faulty and I have found that I could not wake the computer up and so had to do resets. This seems to have caused the nvidia drivers to be damaged and I now can not use my dual screens.
The xorg.0.log shows
Code:
X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
[code]....
also in the missing recommendations are a number of nv-xxx-kernel-sources. I have not tried to install them. what I need to do to get the glx installed and the nvidia-195 activated?
Being a total beginner to linux, I can't seem to find a decent guide on how to install these drivers without much hassle, even though I've been searching for almost couple of hours now.
First, my system specs, taken with Hard Info
Processor: 2x AMD Athlon(tm) II X2 240 Processor
Memory: 3091MB (1865MB used)
Operating System: Ubuntu 10.04.1 LTS
-Display-
Resolution: 1360x768 pixels
OpenGL Renderer: GeForce GT 220/PCI/SSE2
X11 Vendor: The X.Org Foundation
-Multimedia-
Audio Adapter: HDA-Intel - HDA NVidia
Audio Adapter: HDA-Intel - HDA NVidia
-SCSI Disks-
HL-DT-ST DVDRAM GH22NS50
Now, I've installed the "default" (dunno if that would be the correct categorizing) driver with the "Hardware drivers" utility from System->Preferences->Hardware drivers because I've failed numerous times trying to install the package from nVidia site ; I would always get an error while trying to run the package :
"It seems that X server is running on your linux, please deactivate it to install this package" or something like that, but I'm sure it was about X running.
What are the best drivers for Nvidia GeForce 8800 GTS. I'm not 100% sure, but I heard the newest drivers have buggs and aren't 100% compatible with 10.10. I was wondering what the best version of Nvidia drivers would be to install on 10.10? apt-get install?
View 1 Replies View RelatedTonight I upgraded to 11.04. Once I had finished the upgrade, I restarted my computer as it told me too. When I got past the ubuntu 11.04 (purple background orange dots), it simply went to the terminal and asked me to log in. I tried to restart the X server with "sudo service gdm restart" but no display popped up. I happened to have a few NVIDIA drivers in my downloads file also so I gave these a try, but the "install script" failed.
After all this I booted Ubuntu in graphic failsafe mode. I then decided to see what would happen if I removed the proprietary driver. Upon doing this and rebooting my Ubuntu booted into graphical mode "yay!".So without the Nvidia drivers I can finally see something other than terminal, but, I need those NVIDIA drivers for my work. So what can I do? I have tried installing the new NVIDIA linux drivers from the NVIDIA website,and have tried Installing the recommended driver via "additional drivers", but both have resulted in my being stuck in terminal.
After using Arch Linux for a while, I tried Ubuntu 11.04 again. Most of it was a pleasant surprise, except for the nvidia drivers. I currently have the nouveau drivers, but when I activate the nvidia drivers and reboot, it's installed but not in use. I figured I should run nvidia-xconfig (as suggested by nvidia-settings) but that makes my computer boot into a tty. Removing the /etc/X11/xorg.conf file makes it boot in nouveau again.
How do I install the Nvidia drivers? Ive tried the drivers from nvidia.com too, with the same results. I really want to be able to play my games, and nouveau just isnt going to cut it.
When I tried to rescue an old laptop that kept crashing (turned out to be HDD failure), a problem with the graphics quickly revealed itself. A graphical install was already impossible, and it looked like the image was starting halfway and wrapping around the screen, together with all kinds of artefacts. It's hard to describe, but impossible to work with. I did notice that all was okay when I booted into GParted live in the safe graphics mode (vga=normal).By the way, the system specs: AMD Turion64, NVidia 7150M.
When I had succesfully installed Debian using the normal non-graphical installer, the same effects showed up as soon as Nouveau was loaded, so I SSH'd into it to uninstall them and install the proprietary NVidia drivers. After purging nouveau and rebooting, the effects were gone! It clearly was a Nouveau issue. However, after I installed NVidia drivers successfully (X also started fine), I wanted to change the resolution using nvidia-settings which prompted:
"You do not appear to be using NVIDIA X driver. Please edit you X configuration file (just run nvidia-xconfig as root), and restart the X server."
To install the proprietary drivers must be change before the grub?
SDB:NVIDIA drivers - openSUSE
I do not understand where I put the option nomodeset
You know, the "ctrl+alt+F5" type things, where you go to those pure command lines? I installed Ubuntu 10.04 from scratch, and everything was working great! Good resolution, etc. When I booted up my computer, the (very brief) splash screen fit the entire resolution of my monitor (1680x1050), and the X server did the same.
When I'd go to one of those 'tty' terminals, I was surprised (in a good way) to see that they had scaled to my monitor's resolution as well. I was looking forward to using that. Well, time came where I wanted to turn on Compiz, so I downloaded/installed the nVidia drivers. Well, they work. I can work with Compiz and 3D games at full speed and full resolution in Ubuntu, and I have zero complaints about that.
What I do have a complaint about is that the terminals (tty5, in the above example) are back to that old resolution, 640x480 I believe. Also, that brief splash screen is at the same horrible resolution, instead of the full resolution I had on the old nVidia driver that didn't support 3D effects.
Is there a way to get that back? Is it a bug or a glitch that it's no longer scaling the tty's to my display resolution, and do I just have to wait for an update?
I'm trying to install the current drivers (from the Hardware Drivers tool) but it fails, refering me to jockey.log, which contains this:
Code:
2010-05-23 16:19:46,978 DEBUG: nvidia_current is not the alternative in use
2010-05-23 16:19:47,106 DEBUG: nvidia_current is not the alternative in use
[code]....
I just installed a fresh copy of unbuntu 10.04 and downloaded the lastest drivers for my video card but when double click the file, i get a message that says "could not open file/home/desktop name/download/n...nux-86-96.43.16-pkg1.run."Anyone know why this is happening? A friend told me to try to run them in terminal so when i opened the drivers with terminal I get a message saying "error: nvida-installer must be run as root"
View 9 Replies View RelatedI just installed Ubuntu 10.04, it was all working like a charm until y tried to install nvidia's propietary drivers using the integrated hardware drivers manager. Now ubuntu just boots into a non graphical tty. How can i fix Xorg?I have an AMD Athlon X2 5200+, the chipset is a nForce 430 with an integrated Geforce 6150.
View 1 Replies View RelatedI just installed Ubuntu last night parallel to windows vista ultimate (no problems). My biggest problem is that when I tried to install the nvidia display drivers, I somehow downloaded a server based driver (and am having amazingly difficult problems). I use a dual monitor set up (both are plug and play LCD displays) and i'm not too worried about aesthetics but rather, performance. I downloaded the correct driver but now I don't know how to install it. Is there a way to uninstall this server driver?
View 1 Replies View RelatedI upgraded from 10.10 to 11.04 Beta using
sudo update-manager -d
I used Startup-Manager to change the boot default to the last item on the list. I noticed that it was always booting to the first item on the list. As an experiment, I chose one item before last. Now it boots to the last item on the list.
I noticed that grub boot menu shows latest linux kernel as first followed by the recovery version, then there is a sub-menu for previous versions (there were 2 in my case if I choose the previous versions. After that there is memtest and another memtest (serial) and finally the Win 7. I noticed that the StartUp-Manager does not show the sub-menu. It shows all the 7 menus. I think this is a bug in StartUp-Manager in 11.04. Also, I downloaded dropbox .deb and tried to install with Software Center. It gave me an error.
However,
sudo dpkg -i nautilus-dropbox_0.6.7_i386.deb
did the job.
I had to the same with skype install. Software Center did install what were in its list. I tried vlc and emacs.
T=I checked the file permissions of ~/.cache/software-center
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
This is my first post, as I've finally become fed up with trying to get the nvidia drivers installed on Fedora 10. I've read through all the posts here about how people have had problems. I know about the rpmfusion repository, and have followed leigh123's instructions to the letter at this link:[URL]The exact stepsI have taken before following his sage advice follows this way: install off the CD image I burned of Fedora 10, run from the menus "System-->Administration-->Update System" to get the system up to date, reboot to make sure everything is working fine.
Then I follow the above instructions (only because they have gotten me the closest to getting the drivers working). After the reboot from following those instructions, the system starts up, and I have a desktop. But when I restart again, either because I'm shutting down for the night, or just to check again that everything is fine,I get nothing but a flashing cursor in the upper left of my screen. I'm able to CTRL+ALT+F2 and get to a login that way, but can't get into the GUI. I've searched the forums (both here and on The Web generally), and can't find a fix for this that works for me. I have gone back and erased the partition and reinstalled, so I'm at the basic install with all the updates for my system, and needing help with getting the drivers installed and working.
Just to give a run down of what I have on my system:Two NVidia 8500 GT cards connected with the SLI bridgeAMD Athlon 64 X2 Dual Core 3800+Runningl 2.6.27.12-170.2.5.fc10.x86_64 (I'm typing this up as I reinstall updates as I listed above).Before anyone starts giving suggestions, please make sure to give the full instructions, as I'm new to Fedora/Linux. And if there is anything else you wish to know about my configuration
I can't get the Nvidia legacy drivers running. I've the following packages, which are the right ones for my kernel:
Quote:
and I added nouveau to /etc/modprobe.d/blacklist.conf and created a new mkinitrd which boots. But the X11 window system doesn't start up, so I checked if nouveau is loaded and it's really blacklisted. When I manually modprobe nvidia kernel driver I get the following error:
Quote:
FATAL: Error inserting nvidia (/lib/modules/2.6.30.8-64.fc11.i686.PAE/extra/nvidia/nvidia.ko): No such device
and some warnings from the module that 185.18.36 doesn't support my CPU.
My video card is:
Quote:
Try to figure this out for two days now. Rpmfusion is really frustrating for me
Adding vmalloc=256m to the kernel parameters and Option "ConstantFrameRateHint" "True" in xorg.conf also didn't help.
I just installed 10.04 (64 bit, in case that matters) last night. I have onboard sound and video, and they working fine until I installed the proprietary drivers for my video card. When this happened, my sound got all fuzzy/scratchy. I can go back into the Hardware Drivers and remove the proprietary ones and then the sound is fine. My problem is that I want to use better drivers for my video, but not at the sacrifice of sound quality. I went to the nVidia site, and they have drivers from April 24, 2010 on there, but there's a couple problems with that. I don't know if they are any different than the ones I already installed through Ubuntu, and I don't know if they will cause the same issue. Since I'm fairly new to linux, installing the drivers from the .run file seems like more of an undertaking than I want to do right now, and I don't want to mess anything up and not be able to revert my changes. With the Hardware Drivers utility, I can easily remove the drivers and the sound works, but I don't know if that will be the case.
I have an ECS GeForce7050M-M motherboard. I can't really find specifics for chipsets, but the nVidia site detected a GeForce GTX 480 for video. If I recall correctly, my audio is some Realtek HD thing. I had this same problem when I tried 9.04, but I didn't narrow it down to the nVidia drivers at the time.
who installed nvidia drivers on Ubuntu 10.04 and gets a terminal screen on reboot with no GUI.I came across this fix trying to install the drivers on Ubuntu 10.10. later i find that the same thing happens to me on 10.04 but one of the fixes i came across works perfect with it. Ok, so you just installed ubuntu 10.04 updated it through update manager and installed your nvidia drivers but when you rebooted and tried to log on you find yourself in a terminal interface well i found an easy fix for that.
i hope it works for you not saying it will though im new to the linux world only just coming out of windows and i dont know much anyways just log on the terminal and use command "sudo dpkg-reconfigure xserver-xorg" then run nvidia-xconfig command reboot and you should be fine only wish this would work for ubuntu 10.10
Well, its easy i will put an screen shot of my problem xD, the menu bars disappeared, i can enter the archives and use programs, anyone know how to fix it?
I have ubuntu 10.10
post if you need more info
o.o well it got fixed somehow
delete this post