Do you think if I do an upgrade from 9.1 to 10.04 and then add i915.modeset=0 ( works with the live CD) to the boot sequence and then load the proprietary NVidia drivers from sys/admin/hardware drivers, that I'll get full screen resolution.
BTW if I don't use the modeset=0 I get a blank screen after update reboot.
OK, I'm using Ubuntu 10.04 and since upgrading to the 256.35 drivers from the ubuntu-x-swat/x-updates ppa the ambiance and radiance themes have gone funny. For example the scroll bars and buttons are now very white and when hovering over the time it goes a very bright colour. If I return to the 195 drivers the problem goes, but the 256 drivers have better video vdpau performance. The problem occurs regardless of whether compiz is enabled. The login screen is also affected. My gfx card is an 8600m gs.
View 9 Replies View RelatedThought I'd put this together based on what I just did as it's hard to find a place where you get complete info in one place for this topic.
Not taking any credit as it's just piecing together stuff found on the net.
Of course this is for my specific hardware and system so YMMV:
- Palit Sonic GT 240 card
- Lucid 10.04.1 64-bit
- Intel DG33FB board and E7200 CPU
- LG monitor L194WT at 1440x900 res
Reason for choosing the latest NVidia drivers instead of the ones available from the System > Administration > Hardware Drivers option is that the latest ones contain specific fixes for my card, that are not available in the others.
Prerequisites:
All of the following is based on a freshly installed 64-bit Lucid 10.04.1 system. Some actions may need modification if you have already been tinkering with Nvidia drivers.
1. Backup your /etc/X11/xorg.conf file if any. The default clean install of 64-bit Lucid 10.04.1 doesn't create this file so unless you have generated and modified the xorg.conf file for your specific needs, skip this.
2. Install the following packages
Code:
If this doesn't work, run
Code:
And paste the output of that in the command above so you get, say
Code:
3. Remove the following packages using Synaptic's 'Completely Remove' option
- nvidia-173-modaliases
- nvidia-96-modaliases
- nvidia-current-modaliases
- nvidia-common
4. Create a new text file disable-nouveau.conf in the directory /etc/modprobe.d/ with the following contents
Code:
5. Download the latest NVidia drivers applicable to your card from here:[url]
6. Save the downloaded file (e.g. NVIDIA-Linux-x86_64-260.19.29.run in my case) to an easily accessible location like your home folder. Make this file executable by running, say
Code:
7. Check that the driver was correctly downloaded.
Code:
8. Run Update Manager, Check for updates and Apply any found
Installation:
1. Restart and choose the recovery option from the Grub options list.
2. Choose the Root Shell option in the list of options presented subsequently.
3. At the root shell run the following
Code:
If you skip this, the driver installer will inform you of the need to do this.
4. This will present you with a login prompt. Login with your admin username and password.
5. Navigate to the folder where the driver installer is present and run it, like
Code:
6. Accept the license text.
7. Say Yes to installing the 32-bit Open GL drivers.
8. I think you need to say Yes/ Accept once more time to initiate the driver installation.
9. Once the driver is installed it will ask you whether it should configure xorg.conf for you, say Yes. This will create the xorg.conf file if not present in your system and modify an existing one if present.
10. Back at the prompt, shutdown the system
Code:
11. Restart and use the normal startup option in the Grub options list, if all goes well you should see your beautiful desktop.
The new NVIDIA drivers don't seem to work as seamlessly as back in Jaunty and before. In Lucid when I activated the drivers I had to do some grub tweaks to make my splash look normal... But with Maverick it is even more messed up...
Problem: The splash either doesn't appear at all (black screen) or it appears in the text format rather than graphics... In some instances it even hopelessly tried to load the graphics splash - loaded the background but the instead of Ubuntu logo and the progress-bar animation it displayed a "Ubuntu 10.10" in a monospace font.
Is there any way I can get sound working on a MacBook Pro 6,1 in Lucid without breaking the Wifi or Nvidia drivers?
View 4 Replies View RelatedI can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
I have got to install nvidia 260.19.12 drivers in ubuntu 10.10 64 bit. I have got a GTX 460, so I think these are the right drivers [URl]..The question is: how do I download and install 260.19.12 drivers? I would need a step by step guide, because I'm not familiar at all with Ubuntu, so it can be difficult for me, even if I will try my best.
View 9 Replies View RelatedAfter installing I could not boot. In reading several posts I came to the conclusion that I needed nVidia drivers. I installed v173 nVidia drivers & after a few tries got it to boot. But, not somethings didn't work, like Hardware Drivers, Synaptic Package Manage wouldn't search & some software wouldn't open. I tried to update in terminal sudo apt-get update, then sudo apt-get upgrade (I did this before installing v173).
It says:
dpkg: dependency problems prevent configuration of nvidia-glx-173:
nvidia-glx-173 depends on nvidia-173-kernel-source (>= 173.14.20);
However:
Package nvidia-173-kernel-source is not configured yet.
dpkg: error processing nvidia-glx-173 (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
nvidia-glx-173
I'm installing 10.4 fresh but I can't get the Nvidia drivers installed. I'm using a 9400 GT. Ubuntu installs normally but when I try to enable to the proprietary driver, I get an error on reboot "Failed to initialize NVIDIA graphics device" and have to restart X. Any suggestions on how to get this working?
View 9 Replies View RelatedSince 2 weeks now i decide to roll back to my favorite Ubuntu OS.Of course i kept the windows for my creative suite of Adobe that i am working on.So, i downloaded and installed Ubuntu 10.04 LTS and everything went ok.(Even the dual boot with grub).Then i tried to install latest nVidia drivers and after reboot the max.res. i have is 640X480X60Hz. My composition is Intel P4 2.8 --- Gigabyte PE8100 --- GeForce 5700 FX The monitor is Philips CW220 22". I tried many of the guides of Ubuntu forums and some of them made my system unfunctional and some other had no result.
View 1 Replies View RelatedI recently updated to 10.10 and ubuntu will not regonize my NVIDIA drivers. Under apperance "no effects" are filled in. When I try to enable effects it searches for a while but then tells me "Desktop effects could not be enabled". Thing is "NVIDIA x server settings" tells me everything is okey. I tried updating to the latest NVIDIA drivers manually but the problem persists.
View 2 Replies View RelatedI use the sleep function on a timer. Unfortunately recently it has become faulty and I have found that I could not wake the computer up and so had to do resets. This seems to have caused the nvidia drivers to be damaged and I now can not use my dual screens.
The xorg.0.log shows
Code:
X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
[code]....
also in the missing recommendations are a number of nv-xxx-kernel-sources. I have not tried to install them. what I need to do to get the glx installed and the nvidia-195 activated?
Being a total beginner to linux, I can't seem to find a decent guide on how to install these drivers without much hassle, even though I've been searching for almost couple of hours now.
First, my system specs, taken with Hard Info
Processor: 2x AMD Athlon(tm) II X2 240 Processor
Memory: 3091MB (1865MB used)
Operating System: Ubuntu 10.04.1 LTS
-Display-
Resolution: 1360x768 pixels
OpenGL Renderer: GeForce GT 220/PCI/SSE2
X11 Vendor: The X.Org Foundation
-Multimedia-
Audio Adapter: HDA-Intel - HDA NVidia
Audio Adapter: HDA-Intel - HDA NVidia
-SCSI Disks-
HL-DT-ST DVDRAM GH22NS50
Now, I've installed the "default" (dunno if that would be the correct categorizing) driver with the "Hardware drivers" utility from System->Preferences->Hardware drivers because I've failed numerous times trying to install the package from nVidia site ; I would always get an error while trying to run the package :
"It seems that X server is running on your linux, please deactivate it to install this package" or something like that, but I'm sure it was about X running.
What are the best drivers for Nvidia GeForce 8800 GTS. I'm not 100% sure, but I heard the newest drivers have buggs and aren't 100% compatible with 10.10. I was wondering what the best version of Nvidia drivers would be to install on 10.10? apt-get install?
View 1 Replies View RelatedTonight I upgraded to 11.04. Once I had finished the upgrade, I restarted my computer as it told me too. When I got past the ubuntu 11.04 (purple background orange dots), it simply went to the terminal and asked me to log in. I tried to restart the X server with "sudo service gdm restart" but no display popped up. I happened to have a few NVIDIA drivers in my downloads file also so I gave these a try, but the "install script" failed.
After all this I booted Ubuntu in graphic failsafe mode. I then decided to see what would happen if I removed the proprietary driver. Upon doing this and rebooting my Ubuntu booted into graphical mode "yay!".So without the Nvidia drivers I can finally see something other than terminal, but, I need those NVIDIA drivers for my work. So what can I do? I have tried installing the new NVIDIA linux drivers from the NVIDIA website,and have tried Installing the recommended driver via "additional drivers", but both have resulted in my being stuck in terminal.
After using Arch Linux for a while, I tried Ubuntu 11.04 again. Most of it was a pleasant surprise, except for the nvidia drivers. I currently have the nouveau drivers, but when I activate the nvidia drivers and reboot, it's installed but not in use. I figured I should run nvidia-xconfig (as suggested by nvidia-settings) but that makes my computer boot into a tty. Removing the /etc/X11/xorg.conf file makes it boot in nouveau again.
How do I install the Nvidia drivers? Ive tried the drivers from nvidia.com too, with the same results. I really want to be able to play my games, and nouveau just isnt going to cut it.
I've been running Lucid since it dropped. Decided to upgrade my NVIDIA 6600gt graphics card to the newest driver I found at the website. Installation went flawless. But after reboot, I got this:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) May 05 12:24:17 NVIDIA(0): Failed to initialize the NVIDIA
kernel module. Please see the
(EE) May 05 12:24:17 NVIDiA(0): system's kernel log for
[Code]....
I want to use my video card, but after upgrade i got this message:
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
will be apreciaTED, after running from terminal I got this
CODE:
rey@rey-desktop:~$ sudo nvidia-xconfig
[sudo] password for rey:
Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'
Lucid installed without any errors that I can see of off the main i386 installation CD, but after booting I get no display. Even in recovery mode. The monitor doesn't go into sleep mode and I can tell that the OS is actually running the background because I can do a Ctrl-Alt-Del and do a proper shutdown. I'm running an nvidia GT 9500. Everything is working fine on Karmic.
View 4 Replies View RelatedHad mythbuntu/xbmc running for 4 months with vdpau and all the same hardware. I killed it with an update and thought it'd all be easier To build it the 2nd time -- wrong! Fresh install of mythbuntu lucid off cd, Asus p5g43t-m pro, nvidia gforce 9500 gt
What I tried so far...Different drivers with the hardware app thingee. Multiple times -- Purge nvidia, purge nouveau, blacklist list of other video stuff with extra line after, stop gnome, manual install various drivers - 195.xxxxx or Synaptic install various drivers. Tried updates, adding avenard and daily build repos. Everything in combinations. Outcome remains consistant. Lo res error start, can't load nvidia driver, selected but not in use, xorg.conf needs editing.
I'm getting the same error messages as the common nvidia help posts describe but the solutions aren't working for me.
4 days of this, 3 installs plus a shot at Mint, and no progress. I'm pretty frustrated. I'd consider returning to karmic if I didn't think the updates would pork the nvidia driver all over again.
Last install of 9.10 there was a required edit of vmalloc=256M and a shut off of cx18. That's been fixed in lucid? What else ccould it be?
When I tried to rescue an old laptop that kept crashing (turned out to be HDD failure), a problem with the graphics quickly revealed itself. A graphical install was already impossible, and it looked like the image was starting halfway and wrapping around the screen, together with all kinds of artefacts. It's hard to describe, but impossible to work with. I did notice that all was okay when I booted into GParted live in the safe graphics mode (vga=normal).By the way, the system specs: AMD Turion64, NVidia 7150M.
When I had succesfully installed Debian using the normal non-graphical installer, the same effects showed up as soon as Nouveau was loaded, so I SSH'd into it to uninstall them and install the proprietary NVidia drivers. After purging nouveau and rebooting, the effects were gone! It clearly was a Nouveau issue. However, after I installed NVidia drivers successfully (X also started fine), I wanted to change the resolution using nvidia-settings which prompted:
"You do not appear to be using NVIDIA X driver. Please edit you X configuration file (just run nvidia-xconfig as root), and restart the X server."
To install the proprietary drivers must be change before the grub?
SDB:NVIDIA drivers - openSUSE
I do not understand where I put the option nomodeset
You know, the "ctrl+alt+F5" type things, where you go to those pure command lines? I installed Ubuntu 10.04 from scratch, and everything was working great! Good resolution, etc. When I booted up my computer, the (very brief) splash screen fit the entire resolution of my monitor (1680x1050), and the X server did the same.
When I'd go to one of those 'tty' terminals, I was surprised (in a good way) to see that they had scaled to my monitor's resolution as well. I was looking forward to using that. Well, time came where I wanted to turn on Compiz, so I downloaded/installed the nVidia drivers. Well, they work. I can work with Compiz and 3D games at full speed and full resolution in Ubuntu, and I have zero complaints about that.
What I do have a complaint about is that the terminals (tty5, in the above example) are back to that old resolution, 640x480 I believe. Also, that brief splash screen is at the same horrible resolution, instead of the full resolution I had on the old nVidia driver that didn't support 3D effects.
Is there a way to get that back? Is it a bug or a glitch that it's no longer scaling the tty's to my display resolution, and do I just have to wait for an update?
I'm trying to install the current drivers (from the Hardware Drivers tool) but it fails, refering me to jockey.log, which contains this:
Code:
2010-05-23 16:19:46,978 DEBUG: nvidia_current is not the alternative in use
2010-05-23 16:19:47,106 DEBUG: nvidia_current is not the alternative in use
[code]....
I just installed a fresh copy of unbuntu 10.04 and downloaded the lastest drivers for my video card but when double click the file, i get a message that says "could not open file/home/desktop name/download/n...nux-86-96.43.16-pkg1.run."Anyone know why this is happening? A friend told me to try to run them in terminal so when i opened the drivers with terminal I get a message saying "error: nvida-installer must be run as root"
View 9 Replies View RelatedI just installed Ubuntu 10.04, it was all working like a charm until y tried to install nvidia's propietary drivers using the integrated hardware drivers manager. Now ubuntu just boots into a non graphical tty. How can i fix Xorg?I have an AMD Athlon X2 5200+, the chipset is a nForce 430 with an integrated Geforce 6150.
View 1 Replies View RelatedI just installed Ubuntu last night parallel to windows vista ultimate (no problems). My biggest problem is that when I tried to install the nvidia display drivers, I somehow downloaded a server based driver (and am having amazingly difficult problems). I use a dual monitor set up (both are plug and play LCD displays) and i'm not too worried about aesthetics but rather, performance. I downloaded the correct driver but now I don't know how to install it. Is there a way to uninstall this server driver?
View 1 Replies View RelatedUsing Startup-Manager to change your startup screens,etc. can leave you with no gui on next boot:URL...
View 7 Replies View RelatedI have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
I installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?
View 1 Replies View Related