I have to install Windows XP on another partition which already has Windows Seven installed.. but I want to preserve my GRUB2 installation without going through that GRUB reinstall process. Can I copy my /boot/grub that works fine and then paste it again through the live CD?
View 1 Replies
I'm planning FC11 x86_64 with a live cd , but I would like to preserve my /home partition that is in ext3 . or is there a way to do an install and keep my /home and convert it after in ext4
View 1 Replies View RelatedI have Fedora Core 8 installed. I would like to reinstall it so as to get back commands that have been lost. To preserve my user data that has been stored in logical volumes, what selections should I make in the installation process? Are these selections essentially the same for Fedora Core 10?
View 5 Replies View RelatedI have a laptop which this morning had Ubuntu installed on it with no partitioning. Since then I have partitioned the hard-drive into three sections: A partition called "William", the original Ubuntu partition and a general data storage partition called "DATA" (in that order). I then installed Windows 7 Professional 64-Bit on the William partition with no problems to speak of. I have been following the instructions on how to re-enable grub & grub2 after a Windows install at URL...
View 4 Replies View RelatedAfter installing Windows 7 on my laptop, which was already running Natty, I am having issues reinstalling grub. I tried to do this using the method from this tutorial: [URL]... when I enter:
[Code]...
I also tried using --root-directory instead of --boot-directory, and I tried --recheck on both of them without any luck.
Currently I installed Windows Starter, then installed Fedora 15 Alpha from the 'Fedora 15 LiveCD'.Now, I have reinstalled Windows Starter and now my grub loader has been removed.How can I get the grub loader back, with just the LiveCD?Is it possible to do this without the LiveCD?
View 2 Replies View RelatedI just got a Zino HD from Dell, and was planning to use it connected to my TV, dual booting Xubuntu 10.04 and Windows 7. I did, however, run into some issues. I suspect I'm just going to have to burn a restore disc and start over, but I'd like to fix this if possible. Here's what I had to start with:
1 vfat partition (bootup?)
1 dell restore partition
1 Windows partition
Because the restore partition was a bloody 20 GB, and I could always get the restore done via disc, I reformatted it as ext4 and used it as "/". I then shrunk the Windows partition and allocated a home partition and some swap space. Note that immediately after the installer, I reformatted the home partition manually with an inode size of 128 to use with the Windows ext2 driver, but that shouldn't have really changed anything. End result file system order:
1 vfat
1 ext4 mounted as "/"
1 Windows
1 Swap
1 ext3 mounted as "/home"
I now have two problems:
1) I do not get any GRUB menu at all! It just boots directly into Xubuntu with no choices (not even memory test or restore mode).
2) I, obviously, can no longer boot Windows.
Keep in mind that this a fresh install on a brand new machine; I can't think of any reason GRUB wouldn't even show me a menu.
I'm using the Live CD and have followed steps to recover grub2 after XP install. (damn Windows)!
Upon rebooting I get the grub> prompt with no where to go. Upon installing grub via the Live CD I get this:
Quote:
Update:
When I do this link, upon doing the
Quote:
I get this:
Quote:
I've just installed a second hard drive in my laptop with windows 7 on one drive and Ubuntu on the other. I selected the side-by-side install in the Ubuntu install and let Ubuntu do the rest. Unfortunately Grub isn't seeing the windows install even after reconfiguring grub. However, the windows 7 drive is visible in Ubuntu and all the windows files are there intact.
Does anyone know how I can make grub see Windows 7 so I can boot into it?
I was getting ubuntu grub menu, and i was able to login to windows xp, windows server 2008 and ubuntu 10.10. Recently there was some problem with windows server 2008 and i had to reinstall it, once i did that i lost my grub menu. now i am getting plain windows menu with option of login into windows xp and windows 2008. So how can i restore the grub menu, so that i can login into all the three os from one point.
View 9 Replies View RelatedI'm trying to make sure all my windows files stay put, so i'm wondering how to go about installing SLED 10. I can't log onto windows due to a virus infection, so i'm trying to install SLED10 and get all my files from there. I wanna be able to use windows as well as linux as well.
View 8 Replies View RelatedA friend backed up an in accessible Windows 7 partition to a big (close to 1TB) external USB drive using KNOPIX. Unfortunately the umlauts and accents in the file names of his extensive music collection now appear garbled (UTF8 vs ISO xxx, I guess) when he accesses that drive from Windows. My guess is he needs to mount the two drives in a 'special way,' that takes the diacritics translation into account, on KNOPIX? Or do you have another idea what went wrong? This is the second part of a windows/linux problem I'm having. See how-does-one-mount-a-partition-in-windows-7 for the other part
View 1 Replies View RelatedI had to dual boot my computer again with windows unfortunately for school. This is something I've dealt with dozens of times in the past but when I try to recover grub 2 with the ubuntu live cd I get this:
sudo grub
sudo: grub: command not found
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
used sudo update-grub2.
I'm running Karmic Server with GRUB2 on a Dell XPS 420. Everything was running fine until I changed 2 BIOS settings in an attempt to make my Virtual Box guests run faster. I turned on SpeedStep and Virtualization, rebooted, and I was slapped in the face with a grub error 15. I can't, in my wildest dreams, imagine how these two settings could cause a problem for GRUB, but they have. To make matters worse, I've set my server up to use Luks encrypted LVMs on soft-RAID. From what I can gather, it seems my only hope is to reinstall GRUB. So, I've tried to follow the Live CD instructions outlined in the following article (adding the necessary steps to mount my RAID volumes and LVMs). [URL]
If I try mounting the root lvm as 'dev/vg-root' on /mnt and the boot partition as 'dev/md0' on /mnt/boot, when I try to run the command $sudo grub-install --root-directory=/mnt/ /dev/md0, I get an errors: grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea. grub-setup: error: Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume.
Somewhere in my troubleshooting, I also tried mounting the root lvm as 'dev/mapper/vg-root'. This results in the grub-install error: $sudo grub-install --root-directory=/mnt/ /dev/md0 Invalid device 'dev/md0'
Obviously, neither case fixes the problem. I've been searching and troubleshooting for several hours this evening, and I must have my system operational by Monday morning. That means if I don't have a solution by pretty early tomorrow morning...I'm screwed. A full rebuild will by my only option.
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
View 1 Replies View RelatedI am now using ubuntu 10.10. I am going to install ubuntu 11.04 on April 28 (after it is released). I want to preserve:
1) the list of extra programs installed by me on ubuntu 10.10 (I want to install the same programs in 11.04 also)
2) program settings
My questions:
1) From synaptic package manager menu:
File -> Save Markings (save full state, not only changes)
saves in a text file the list of programs installed on my system. I used that file to install the same programs in several computers running ubuntu 10.10. Is there a way to use that list in 11.04 also.
2) Copying the directory ~/.mozilla preserves all settings of firefox from previous installation. Like that what files should be copied for gnome applications (gnome-panel, nautilus, etc.)
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
I will be version-upgrading a friends (Ubuntu only) laptop very soon. It is 9.04 now and the new version will be (ideally) 10.04.1 The machine has a large unused area on the hard drive and who has known this situation was to use the uncommitted area to do a complete new install of 10.04.1, leaving the 9.04 unchanged (useful insurance). Then, copy, paste (?) the /home directory from the 9.04 into the newly completed installed 10.04.1 overwriting the installed directory.
Opinions seem to support the notion that such a paste into 10.04.1 is likely to be successful and trouble free as long as the 10.04.1 installing username is the same as the 9.04 username with same privilege level. I would be grateful for comments here, particularly with any details, gotchas, you can see.
after I install windows the grub is gonei tried to do some thing and i follow the steps listed in this linkhttp://ubuntuforums.org/showthread.php?t=922678because it was very similar to my problem, i did every thing up to step #10 which issudo mount -o bind /dev /mnt/dev sudo mount -t proc none /mnt/proc sudo chroot /mnt apt-get install grub update-grub exit know when i reboot i became to grub screen ( grub> with no option. even my windows is gone I don't know what to do
View 9 Replies View RelatedI virus got my XP installation this morning. I have to install it. When I install windows it will write over the GRUB and I will no longer be able to re-boot my openSusie OS. My question is After XP is installed is there a way to re-install GRUB without having to re-install openSusie 11.2?
View 9 Replies View Relatedi've been using ubuntu with wubi, and I'd like to install it on my new hard drive (so windows is on one hdd and ubuntu is on another). afaik, grub will be installed on the hdd w/ ubuntu, and i have to set it to recognize the other (windows) hdd. assuming that i want to get rid of ubuntu and just use windows, what steps do I have to take to do so? (if grub is only on the ubuntu hdd, then would I just have to format it?)
View 2 Replies View RelatedHow do I reinstall GRUB after a Windows install? I tried using the LiveCD but when I pop in the CD and type
Code:
So, I converted a Vista user by enticing her with WUBI. She's a computer idiot, and she thinks Linux is great.
HOWEVER, she recently had Ubuntu muck up for her, so she uninstalled WUBI/Ubuntu and reinstalled it (9.10). Upon restart, GRUB presented no boot menu and went straight into Ubuntu. The funny thing is, under the GRUB configuration files, the timeout for the boot menu is set to 10. I tried the following (made sure to change the boot device to hda1,0 since fdisk shows her NTFS as /dev/sdb1):
[URL]
No luck. No boot menu, no Windows option. I also tried the following:
Manual Windows Entry (with /etc/grub.d/30_os-prober made unexecutable)
Code:
#! /bin/sh -e
echo "Adding Windows 43_custom" >&2
menuentry "Windows Vista 43_custom" {
insmod ntfs
[Code]....
Using THIS method, the boot loader did appear, but there was no Windows option. Odd. So, I'm at a blocking point. Yes, I was smart enough to run update-grub Thoughts? My replies may be a bit delayed - she's 2 hours away and I don't have direct access to her computer.
So how can I (e.g. after using dd) boot to this dd'd Windows Installation partition with Grub?
I just want to do this as installing Windows from Hard Drive is much faster.
E: The solution was Unetbootin. Did nothing special myself (defined the .iso path and the partition (/dev/sda4)), the app did all the work.
I re-installed Windows over an old Windows partition. The hard-drive used to have Windows and Ubuntu on it. I am now in usb live ubuntu because grub doesn't appear anymore when I boot the computer (it boots in the new windows automatically). The ubuntu partition is still there, as I can access my files from this live usb. I'd just like to know how to re-install grub.
View 1 Replies View Related
