Ubuntu Installation :: Pentium 4 Slow As An Old Carthorse?
Aug 18, 2010
I just installed 10.04 Desktop onto an external USB disk and used it to boot an old Acer Veriton 7600G with a Pentium 4 CPU clocked at 2.80 GHz, 3 Gb of memory and an AGP Sapphire ATI Radeon video card with 512 Mb of DDR2. With nothing running, nothing swapping, only 7% of memory in use, and around 11% of both CPUs, this system is so slow that with no programs running it takes about 5 seconds to switch between dropdown menus in the main Applications/Places/System menu. The standard GMatrix screensaver takes forever to crank out a single character.
View 5 Replies
ADVERTISEMENT
Mar 30, 2010
what version of Ubuntu (or k, x, null prefixes on Ubuntu...) would you recommend for this dated machine?
Pentium 4 2.0 GHz
256 MB RAM
View 9 Replies
View Related
Jul 31, 2010
Anyone here installed 10.04 on Pentium III's? I have tried installs on 5 of them and have had 5 video failures. These machines all currently run various earlier Ubuntu releases (8.04, 9.04, etc). All of them have 512 M memory but video memory is 32M or less. I have installed 10.04 successfully on 2 Pentium IV's that have 128M video memory so I suspect that's the difference. Is there any trick I'm missing to get the new XRANDR working on these old P-IIIs or should I give up? What I get when bringing up 10.04 from live CD is just a black screen... as 10.04 appears to grind to a halt or just hang.
View 4 Replies
View Related
Apr 16, 2011
Trying to revive a Compaq Evo Pentuim III 1066 MHz laptop with 256mb of RAM.
Which ubuntu version will it best support?
View 9 Replies
View Related
Dec 8, 2009
This is harder than it should be. 233 MHz Pentium Pro, 128 MB RAM, Matrox Mystique graphics. The important thing is 35W idle and no fans - a perfect firewall.
Things discovered so far:
- I need to burn DVDs for this machine with -speed=2 (sigh!)
- The syslinux boot loader cannot display its graphical menu - must use the syslinux boot: prompt (double sigh)
- The Live CD does eventually boot into X
The install DVD boots but quickly displays a "You do not have enough RAM to install Fedora on this machine" dialog (this is in text mode). Two questions:
Q1. Is it possible to get anaconda on the DVD to use a swap partition (or otherwise fit into 128MB)?
Q2: Failing that, can I install from the Live CD without starting X?
View 7 Replies
View Related
Sep 17, 2010
I can't seem to ge blue katana to load on my old Pentium III. I had it on here once before about 8 years ago. It gets to "checking partician hda:" and just stops.
View 5 Replies
View Related
May 6, 2011
I have installed Ubuntu10.04.1LTS in my Desktop amd64 computer. I also downloaded the same version for i386 processors and tried to install the OS for my HCL Pentium Dual Core T4300 @2.1Ghz 4GB RAM laptop, details of which are given in the following two screenshots: dscf0105.jpg and dscf0106.jpg I already have Debian Lenny 5.0.4 installed on the laptop dscf0104.jpg and the laptop works fine when I run the Debian OS or Knoppix liveCD image stored in the HDD of the laptop. We all know that the Ubuntu LTS live CD leads to the following option: Screenshot.jpg However, in my laptop the operation freezes before we can reach the above option. The screenshot explains the situation: dscf0107.jpg I know I could always use one of the alternate downloads and install the OS from it. But my point of contention is: where is the matter going wrong? Can't we use the graphical installer CD to do a CUI installation?
View 8 Replies
View Related
Jun 2, 2011
What is the difference between Fedora 15 Live cd & Fedora 15 Install DVD?
I am unable to install using Live cd on my Pentium 3 based system.
Will the Install DVD solve that problem?
Max ram is 512MB on my system & there is no more room for any upgrades.
View 5 Replies
View Related
Sep 14, 2010
I got an old PC at home , Pentium MMX 166Mhz 32MB RAM
Which distro work best with an old machine like above?
Purpose:- Internet & Download
- Basic File Server maybe for the rest of Windows machines.
Machine Specs:
- Intel Pentium MMX 166MHz
- 32MB Ram
- HDs: 2GB
- DVDrom
I've been using ubuntu for a while and I am comftable with it's interface.
View 1 Replies
View Related
Oct 30, 2010
I`m having problems trying to install ubuntu 10.10 in a pentium 4.I run memory test in the start page after selecting language and I see lots of errors.This is strange because I have added memory and changed the disk, which was broken.
View 5 Replies
View Related
Mar 24, 2011
I do some light video editing mostly desktop usage and some Urban Terror. I need to know if I need seperate 32 Bit stuff installed to run 32 bit applications. If so then I will just use the 32 bit counterpart. Can I run 32 bit Flash in 64 bit Firefox? The OS will be 10.10 until 11.04 is like a month or so old and updates have come out to fix issues.
View 7 Replies
View Related
Aug 4, 2011
I just installed Ubuntu 10.04 on a laptop that was given to me. It is having a lot of lag issues,especially when playing videos and visiting websites using flash. It's an Intel Pentium 4 2.4GHz machine. I think that it should perform better because I had used and AMD Sempron 2.0GHz machine with Ubuntu before and video playback was much better than this. I'm thinking that my problem is the graphics card driver. Here is the card that this machine has:
Code:
:~$ lspci | grep Radeon
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 330M/340M/350M
The AMD machine was using a VIA graphics chipset.
I used the command "Xorg -configure" to create a xorg.conf file, hoping that might help. But it didn't. Here it is:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]...
Is there any tweaking that I can do in the xorg.conf that might help? I don't know which of those options I should set. I also tried changing the driver to "ati" but that did nothing. found some info for settings with "man radeon", I'm going to try some of those out.
View 9 Replies
View Related
Jan 31, 2011
I have a Pentium 3 computer with Intel i810 motherboard. It is 866 Mhz, 512Mb SDRAM, 20+160 Gb harddisk which is originally showing 20+137 Gb, 16 Mb inbuilt video memory. I have only three PCI slots and not PCI-express or AGP. I want to install a graphics card to my computer. Please, tell me which graphics card should I buy which will support my computer and also I want to install a graphics card having memory of 128-256 Mb or it can be more also if my pentium 3 supports it. Also, do I need to upgrade my powersupply also to install a graphics card? I want to play games like Vice city, Underground. I am currently using Windows Xp.
View 5 Replies
View Related
Oct 15, 2009
If I install Citrix in Fedora (or Ubuntu) will I be able to remote in to my computers using Rdesktop or the Terminal Services clients included with Windows? Will it be faster than VNC?
When I asked about using remote dektop on Linux I was told that RDP was a proprietary MS thing, but I read it's based off Citrix and Ctrix is actually a better version of it that supports more features and different OSes and not just Windows.
I just install Fedora on my Pentium III machine (with the drive tray). So now I am running it at home and school and I need a way to remote into it...
View 14 Replies
View Related
May 10, 2010
are there real advantages for me in the PAE kernel? Execute Disable Bit/NX bit? Are viruses in linux coming up? Would you change to the Physical Address Extension? Or is this just enabled in the default kernel of openSUSE now?Since a update to openSUSE 11.2 via a new installation I use the default kernel. As I remember before that it was the PAE kernel. I have only 2 GiB memory on my laptop.
Physical Address Extension - Wikipedia, the free encyclopedia
Intel� Pentium� M Processor 740 (2M Cache, 1.73 GHz, 533 MHz FSB) with SPEC Code(s) SL7S8, SL7SA, SL86B
1% performance overhead of paravirt_ops on native kernels - linux.kernel | Google Groups
View 3 Replies
View Related
Jul 22, 2011
i have a sony vaio desktop pentium 4 1.5ghz 128mb and i want to install ubuntu on it,iv tried ubuntu 10.04 but it doesnt meet the system requirements,i also tried ubuntu 8 but it says "this kernel requires an x86-64 CPU and i only have i1586CPU"
View 2 Replies
View Related
Mar 8, 2010
I'm a Linux Mint user, but I'd like to cross over to Debian. I used the x86 architecture for the Mint install, but I couldn't find that anywhere on the Debian site. what the architecture for the Intel Pentium D dual core is?
View 2 Replies
View Related
Jul 1, 2011
I recently obtained a built machine that has an Intel motherboard. The computer had Windows XP on it, but the owner wanted me to format it completely before I started using it. Nbd, I just used a gparted live cd and formatted the 200gb Seagate it came with.
Well now, I think the drive is dead or something, because whatever machine I put it in, it doesn't boot.
So, being out the 200gb drive I was hoping to use, I just threw in a spare drive I had laying around. (This is isn't the point of this thread.)I planned to use the machine as a basic server, so I made a Debian install CD and just let the installer run (completing the appropriate prompts). However, usually towards the end of the installation, the machine completely kills itself. It just randomly shuts off. No message about it, just, "Click!" and the machine's dead. I know the installation doesn't complete, I've used the CD on other machines, and Debian will tell you that it's finished and getting your consent before turning off.
Upon trying to reboot the machine, after a few seconds of POST messages, it kills itself again. And again. What I've figured out is pressing the reset button a few times during boot usually gets to go eventually. I swapped the power supply out, but that didn't make a difference. I've tried different RAM. I swapped out the CMOS battery. Nothing seems to be working.. As of right now, it does not kill itself, but it will turn on and immediately it hangs on a a screen that says Nvidia Vanta VGA BIOS and some other video card info. After it started doing this is when I changed the CMOS battery.
The board is older, an Intel D845BG. The first power supply was 300w, as was the second. I also tried a 250w one with no results. The standby light on the motherboard does go on as soon as it gets power. I tried a different video card, just as a "why not?", and the machine still didn't boot, however that first POST line changed to 3D Prophet II, etc. or the name of the video and it reflected the change in video memory.
View 9 Replies
View Related
Dec 28, 2010
I've recently been trying to resurrect an old laptop and so I brought a new HDD to replace its broken one. I then figured that Windows would probably be too resource hungry to run on the laptop and so thought I should try to run a Linux Distro instead but now I've hit a wall. I can't find a distribution that will install on this low a spec PC but also will enable me to use the wireless card I've specified, even though the card has Linux drivers bundled with it.
View 6 Replies
View Related
May 12, 2010
i installed Slackware 13 no problem.i didn't configure my network from the installer. now when i log on and plug in the ethernet cable nothing happens. i am not sure if this is a hardware issue or a software issue. p.s. if it makes any difference the light green backlight does come on when i plug in the cable both on the computer and on the modem. i have now installed slackware 13.1 and it works great
View 4 Replies
View Related
Sep 5, 2009
I am looking to install Linux on a Dell Precision 340 with unpartitioned 17G (scsi) disk space available.
It is a 4-5 year old workstation with Nvidia Quadro2 MXR/EX video controller.
It has a Windows XP Pro installed on the primary partition.
Which OS should I download and install?
Is the X86-64bit CentOS 5.3 an option?
View 2 Replies
View Related
Aug 6, 2010
i have tons of computers running and my best one cant play the oldest games. My old P3 can play these games and this computer cant.
[Code]....
So basically a 2GHz machine with 2Gigs of ram and a Geforce 8300. I'm running Ubuntu 9.04 (jaunty i think ?). Anyway all of the basic games dont work well, they are choppy and slow. I put them in the lowest resolution just for them to be playable. It does not make any sense to me I have the latest version of the nvidia drivers running (I used ./NVI... --update)
[Code]....
This program is used to configure the NVIDIA Linux graphics driver. Copyright (C) 2004 - 2010 NVIDIA Corporation. The only thing I can think of is a crappy video card ? but still i should be able to run these old games.
View 6 Replies
View Related
Dec 7, 2010
Why can't I find a HCL?
Does Fedora 14 support ASUS P5KPL SE motherboard?
What is the best board to use with Fedora and a INTEL PENTIUM D E5500 processor?
View 3 Replies
View Related
Feb 23, 2010
Compiling a kernel on this machine first time and get upset with which processor family/type/options to select for my Intel Pentim Dual Core T2390.Does sombody know how to configure kernel better for this processor?
View 5 Replies
View Related
Jan 30, 2010
Ive been trying to install Fedora 12 on a Dell Latitude C600, (Pentium III 750/600 MHz; 256 MB RAM; 250 KB Level 2 Cache; 8 MB Video Memory; ATI M3 Video Controller) Downloaded iso files from Fedora Project, Verified integrity with sha256sum.exe, burned to 5 CD's. Disc's 1 & 3 failed Linux test at installation. Burned Disk 1 twice more and still fails. Went ahead with installation. Chose to Use all of the 20 B hard disk. Would not install via graphical. Finished after Disk 1. After re-starting computer and logging into root, only get CLI operability and can't seem to get a GUI. I'm new to linux - just thought I'd put this laptop to use to familiarize myself with it.
View 3 Replies
View Related
Apr 27, 2011
Being a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
View 9 Replies
View Related
May 3, 2010
I'm an Ubuntu user since Jaunty, and I've always upgraded my system (NOT fresh install). Everything went fine, but yesterday I upgraded to Lucid. My only concern -for now- deals with startup time. I'm a desktop user (Core2@3GHz) so I think I should boot in less than 10 seconds. Anyway, boot time is 30 seconds - not too much, but there is definetly something wrong with tools I don't know (ureadahead, plymouth, etc.). Attached is my bootchart: can anyone explain me what's wrong?
Also, I don't even see a plymouth Ubuntu themed bootsplash: I only see a blank (black) screen standing for seconds, then I see the bootsplash for less then half a second, then GDM appears :S Not crucial -I know- but how can I fix it? (I don't know if it's related, but I can see the animation at shutdown)Finally, GNOME desktop takes too long to load. I don't know why, but there are 15/30 seconds in between login sound and a usable desktop (with panels and icons, I mean).Please help me, I don't want to do a fresh install. Boot speed is not a dial with desktops - I know - but it can be a symptom that my system is a bit a messy (and I don't like it, since I installed Jaunty less then 1 year ago). (!Forgot! I also installed grub2 by hand
View 6 Replies
View Related
Jan 22, 2010
I just want to know how to easily speed up my computer because it runs desperately slow. I am running windows Xp which is about two years old.
View 9 Replies
View Related
Apr 17, 2011
Whenever I transfer a movie into my 16GB USB flash disk, my whole system becomes windows-like and unusable!
When i drag the file(s) into the USB disk folder, it starts out fine and pretty darn fast (25mb/sec) then slowly decreases until it's unbearably slow (3m/sec) and as a side effect my whole system starts deteriorating. I basically have to wait for the file to finish transferring before i can use my desktop again!
This has been happening with every version since Karmic (all 64bit)- I put up with it because I don't use the USB stick that much.. but lately it's been my go to source for transfering large files to/from work.
View 3 Replies
View Related
May 14, 2011
The company im working at is planning to sell some of the old lappy One of them is this pentium3 laptop (for only 20 bucks DD)
the specs are:
pentium 3 1.1ghz
640MB ram
28GB hdd
wifi
Im wondering that if this machine is sufficient to run linux as a server I dont plan to use it for anything big just among me and a few friends Also, I dont rlly need any Desktop Environment as I can just ssh to this machine from my other laptops if I need to do any work on it.
Hence, my questions are as follows:
1. is this machine sufficient to run linux as a web/file server for me and a few friends?
2. also, is it okay to rlly run this laptop 24/7? (its a rlly old laptop after all)
3. lastly, altho I prefer using opensuse, but if I dont need any DE at all, would Arch be a better solution? (Its known to be very small and light)
View 9 Replies
View Related
