General :: Graphics Card For Pentium 3?
Jan 31, 2011
I have a Pentium 3 computer with Intel i810 motherboard. It is 866 Mhz, 512Mb SDRAM, 20+160 Gb harddisk which is originally showing 20+137 Gb, 16 Mb inbuilt video memory. I have only three PCI slots and not PCI-express or AGP. I want to install a graphics card to my computer. Please, tell me which graphics card should I buy which will support my computer and also I want to install a graphics card having memory of 128-256 Mb or it can be more also if my pentium 3 supports it. Also, do I need to upgrade my powersupply also to install a graphics card? I want to play games like Vice city, Underground. I am currently using Windows Xp.
View 5 Replies
ADVERTISEMENT
May 2, 2010
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
View 1 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Jan 4, 2011
the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time.
The exact message is:
The current settings cannot be applied. Possible issues may include:
- Display(s) cannot be enabled.
- Setting(s) cannot be applied due to insufficient video memory.
So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question:
First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment. UPDATE: I got my active adapter in the mail today (it's DisplayPort to DVI) and so far things seem to be better. I can run my third screen, drag things seamlessly between them, and I am also running compiz. The adapter I'm using is a "B087B-005B" made by "Accell", UPC is "826388106239".
There's still a couple "annoyances" that need worked out though: The left most screen is always the primary monitor. Which means the "gnome bar" (is that what you call the applications-places-system menu?) is always on the left most screen. It also means that new dialogue boxes always opened centred on the left screen, which is counter intuitive. Especially if you're using a program like GIMP and the text editor or color picker pops up on the left. Does anyone know of a way to change it so that new windows always pop up on the center screen?
View 3 Replies
View Related
Apr 9, 2010
I've recently been experimenting with glxgears, but found people saying this is not an ideal benchmark tool as there are many variants; for example resizing the window affects the FPS tremendously.
I'm interested in testing the difference between using the proprietary ATI driver and the open source driver and also the performance under various distributions.
What's the best software to benchmark graphics cards?
View 4 Replies
View Related
Jun 1, 2011
I came across this article, which I found to be very interesting and thought share it with you all.
Graphics CardMemory as swap space or RAM disk.
[URL]
View 14 Replies
View Related
Jun 8, 2011
I'm trying to install the drivers for my nvidia graphics card. I downloaded the shell script from the nvidia website. However, there's something peculiar going on. When I execute the shell script it says it cannot find my kernel headers, yet I can verify that my /usr/include/linux/kernel.h does exist. I have selinux on, but just installed os with it on, so contexts are fresh. Checked them as well. After doing some research I found something out. When I run a 'uname -a' I get this.
Code:
Linux ariel 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 EDT 2010 i686 i686 i386 GNU/Linux
Yet when I ran 'yum install kernel-devel kernel-headers' they installed the following versions.
Code:
kernel-headers-2.6.18-238.12.1.el5.i386
kernel-devel-2.6.18-238.12.1.el5.i686
Shouldn't they be
[Code]...
I see that the error in the nvidia shell script can't locate the header files for the RUNNING kernel version which makes sense. Why would yum install that version instead of the one in 'uname -a'? Or am I misunderstanding something?
View 3 Replies
View Related
Apr 17, 2010
I was having trouble getting X.Org to work with the video card in a recently acquired laptop, so I decided to try to probe around the configuration of a Linux Live CD to figure out how to set up my kernel. I chose the Sabayon 5.0 Live DVD because it was the only one that I could find that was the same or newer than the 2.6.32 kernel I have installed on the laptop right now. Of course, the DVD booted right into GNOME without issue, unlike the hangs and crashes that I had been getting. So, I want to figure out what kernel driver this Live DVD is currently using, but I don't know how to. hwinfo doesn't shed any light on the matter, and lspci -vnn doesn't list a driver for my video device, though both methods correctly identify that I have an Intel 855GM video processor. How can I find out this information?
View 1 Replies
View Related
Jan 16, 2010
For the last month, when starting up or shutting down my laptop under Linux, I would get graphical corruption. Startup has an colour inverted, grainy rendition of what should be displayed while shutdown has a red background with all the text replaced by grey rectangles.
At the very least this affects Fedora, Ubuntu and Xubuntu. Windows is not affected. Outside of startup/shutdown the system is fine.
View 2 Replies
View Related
Sep 5, 2011
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
View 3 Replies
View Related
Mar 30, 2009
very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies
View Related
Jan 4, 2011
Finished installing Ubuntu 10.10 in my XPS15, intel i5 4g ram, nvidia GT 420M graphics card,
problem is when i go to additional drivers, the driver listed (Nvidia accelerated graphics) when I install it and reboot it the computer starts on the terminal, no graphic interface. All I get is the black screen asking me login and password, when I enter them, just get the terminal prompt in a black screen.
View 3 Replies
View Related
Oct 30, 2010
I`m having problems trying to install ubuntu 10.10 in a pentium 4.I run memory test in the start page after selecting language and I see lots of errors.This is strange because I have added memory and changed the disk, which was broken.
View 5 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
Dec 28, 2010
I've recently been trying to resurrect an old laptop and so I brought a new HDD to replace its broken one. I then figured that Windows would probably be too resource hungry to run on the laptop and so thought I should try to run a Linux Distro instead but now I've hit a wall. I can't find a distribution that will install on this low a spec PC but also will enable me to use the wireless card I've specified, even though the card has Linux drivers bundled with it.
View 6 Replies
View Related
Feb 23, 2010
Compiling a kernel on this machine first time and get upset with which processor family/type/options to select for my Intel Pentim Dual Core T2390.Does sombody know how to configure kernel better for this processor?
View 5 Replies
View Related
Jan 30, 2010
Ive been trying to install Fedora 12 on a Dell Latitude C600, (Pentium III 750/600 MHz; 256 MB RAM; 250 KB Level 2 Cache; 8 MB Video Memory; ATI M3 Video Controller) Downloaded iso files from Fedora Project, Verified integrity with sha256sum.exe, burned to 5 CD's. Disc's 1 & 3 failed Linux test at installation. Burned Disk 1 twice more and still fails. Went ahead with installation. Chose to Use all of the 20 B hard disk. Would not install via graphical. Finished after Disk 1. After re-starting computer and logging into root, only get CLI operability and can't seem to get a GUI. I'm new to linux - just thought I'd put this laptop to use to familiarize myself with it.
View 3 Replies
View Related
May 30, 2011
having fitted my computer with a quieter case fan and power supply, the loudest component is now my nvidia geforce 7900gs graphics card. Whilst not intolerable, I would like a solution to make it near, or absolute silent, and so in light of this a few questions:
1) How can I be sure the noise i'm hearing is the fan, and not a whine from the card?
2) How do I find out at what temperature low - if at all! - the fan switches off at? i.e. driver functionality
3) Do I dare use nvclock (nvclock -f -fanspeed x) to go below my current 20% fanspeed at a temp of 56C?
4) Would a cooling unit make any difference, especially if the driver won't shut down the fan anyway?
5) Is there a safe script I could try out?
View 14 Replies
View Related
Jan 13, 2010
I installed the "recommended" graphic driver that pops up at top right and once I restarted the laptop, my graphics card no longer works with Ubuntu.
using Nvidia GeForce GT240M
View 2 Replies
View Related
Jan 21, 2010
I've put a second video card in my computer running 9.10(64-bit) to setup a 3rd monitor.
I'm using the following video cards with the 190 driver from nVidia:
Video Card 0: nVidia GeForce 9500 (PCI express x16)
Video Card 1: nVidia GeForce 6200 (PCI)
but when i run lspci the second video card isn't seen in the list. The bios is set to automatic detection, and I've seen it work on a identical second system that has windows 7 so I know the bios is capable of running the two cards concurrently.
I've verified the 190 driver is compatible with the 6200 series and have tested it by setting the bios to use the (PCI) device manually.
View 8 Replies
View Related
Feb 23, 2010
Is it possible to run a box with 2 graphics cards in it with one card being a PCIe x16 and the other being a PCIe x1?
Unsure whether this would cause all sorts of problems with ubuntu and/or the nvidia drivers (2 quatro NVS 290's).
View 1 Replies
View Related
May 13, 2010
I want to run a system that acts as a basic file server, I want to remove the graphics card for the sake of power saving and less heat in the box. My machine can boot without the GPU, and I can ping it and use putty to do things, but I'm still new to Linux and don't really know what I'm doing so GUI is best for me atm.
From somewhere I picked up that this is possible (the XDMCP server machine can have no GPU). This post here [URL].. seems to be what I am looking for, but I don't know how to "convert" these instructions to Ubuntu (the files mentioned do not exist on my install anyway).
[Code]...
View 9 Replies
View Related
Aug 24, 2010
I'm using a lenovo notebook with switchable graphics (Intel HD and ATI Radeon 5650), and I'd like to have Ubuntu use the integrated graphics, but I can't figure out how. The BIOS has two graphics options: switchable and discrete. On discrete just the ATI card runs, but on switchable, it seems like both cards are being used. Is it possible to use just the integrated graphics?
View 8 Replies
View Related
Sep 16, 2010
What is the best graphics card for running compiz and win 7, geforce 5700le agp, geforce fx5200-dv128, geforce 5600ep agp or geforce mx4000-dv128 agp?
View 2 Replies
View Related
Sep 27, 2010
I want to update my graphics card :s How do i do it ?
I run ubuntu 10.04
View 5 Replies
View Related
Oct 4, 2010
I have the latest Ubuntu version with the PAE so that I can have the 4 gigabyte ram memory. I have had difficulty in fixing the graphics card. What should I do?
View 1 Replies
View Related
Oct 13, 2010
Ubuntu is not the problem; I don't think. I'm running Maverick 10.10. With my computer I have to unplug and plug back in the graphics card every time I want to start up the computer so I usually keep it running 24-7. There was a power surge and when I got it back running, once it reached the load boot screen and it was stuck their for awhile. Then it instantly sent me to x-term. So I tried logging in and typing:
sudo start gdm
It said it was already running but I could not display anything or login the normal way. I restarted and the same thing happened. I managed to get to Recovery Mode and I fixed broken packages and then I ran it in low graphics mode. It said that the display, monitors, input, and graphics card could not be detected. If there was a way to resize the screen to something more tolerably than 800x600 in low graphics mode I'd be glad to hear it. I could at least stick around to using that until I can fix some stuff up.
View 1 Replies
View Related
Oct 26, 2010
I've just installed ubuntu 10.10 on my desktop system. it worked fine with my 5770 but when using my gtx 460 it has a crashing problem. After roughly 30 secs running the screen has a red cast and a grid pattern to the bottom right of the mouse. Need directions to solve this such as new drivers or an exact sequence etc as i've only got 30 secs to completee process before it freezes. Specific graphics card is a gainward gtx 460 GLH too btw
View 4 Replies
View Related
Nov 14, 2010
I purchased a new computer and the desktop has a 512 (MB) NVIDIA G310 GeForce video card. It doesn't have an HDMI interface but DVI, I'm not sure if ones better than the other. I'm wondering if I should upgrade the video card. I'll be running windows 7 and Ubuntu but the thing is I won't be doing any gaming on the computer other than casual gaming. I have a play station 3 that I do gaming on. Would there be a need or would I notice a difference if I updated the graphics card for everyday and multimedia computing? Do I want to have a card that runs thru PCI Express 2.0 x16?
View 1 Replies
View Related
Nov 15, 2010
According to some info I've been given that helped solve a video flicker, I'm in need of a replacement graphics card for my new machine. can I have working flicker free video and CCSM effects? or is it a case of one or the other?
Quote:It is hardware dependent...in my experience it varies from card to card.Current Machine spec: Asus M4A87TD/USB3 870 Socket AM3 8 Channel Audio ATX Motherboard Corsair 4GB (2x2GB) DDR3 1333MHz Memory Kit Unbuffered CL9 AMD Athlon II X2 250 3.00GHz Socket AM3 2MB L2 Cache Retail Boxed Processor Asus GeForce G210 512MB DVI VGA HDMI Out PCI-E Low Profile Graphics Card I want to get rid of the graphics card anyway, for something passive (very annoying fan on the current one), but was planning to just get a passive g210. Does anyone have any other suggestions that might allow me to have desktop effects and reasonable flicker free video playback? similar in budget to the original would be good.
View 4 Replies
View Related
