Ubuntu Installation :: 10.04.1LTS Freezes In Pentium Dual Core Laptop?
May 6, 2011
I have installed Ubuntu10.04.1LTS in my Desktop amd64 computer. I also downloaded the same version for i386 processors and tried to install the OS for my HCL Pentium Dual Core T4300 @2.1Ghz 4GB RAM laptop, details of which are given in the following two screenshots: dscf0105.jpg and dscf0106.jpg I already have Debian Lenny 5.0.4 installed on the laptop dscf0104.jpg and the laptop works fine when I run the Debian OS or Knoppix liveCD image stored in the HDD of the laptop. We all know that the Ubuntu LTS live CD leads to the following option: Screenshot.jpg However, in my laptop the operation freezes before we can reach the above option. The screenshot explains the situation: dscf0107.jpg I know I could always use one of the alternate downloads and install the OS from it. But my point of contention is: where is the matter going wrong? Can't we use the graphical installer CD to do a CUI installation?
View 8 Replies
ADVERTISEMENT
Mar 8, 2010
I'm a Linux Mint user, but I'd like to cross over to Debian. I used the x86 architecture for the Mint install, but I couldn't find that anywhere on the Debian site. what the architecture for the Intel Pentium D dual core is?
View 2 Replies
View Related
Feb 23, 2010
Compiling a kernel on this machine first time and get upset with which processor family/type/options to select for my Intel Pentim Dual Core T2390.Does sombody know how to configure kernel better for this processor?
View 5 Replies
View Related
Apr 16, 2011
Trying to revive a Compaq Evo Pentuim III 1066 MHz laptop with 256mb of RAM.
Which ubuntu version will it best support?
View 9 Replies
View Related
Feb 14, 2010
Just a quick question. Does Kubuntu Karmic support core 2 E8500 out of the box or do you need the SMP kernel?
View 3 Replies
View Related
Nov 3, 2010
I just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
View 2 Replies
View Related
Apr 1, 2011
i am running gigabyte GA-M68M-S2P and AMD sempron 2.7. the problem is when i try to run dual core. it will boot and run for 2mins then it crashes. single core runs perfect.
View 6 Replies
View Related
May 15, 2010
I've a Compaq CQ61 laptop, and i noticed that one of the cores is always at 100%.
I didn't check the duration of the battery but surely it will "eat" my battery in a hurry
View 1 Replies
View Related
Sep 7, 2011
I have now installed Wheezy on two different hard drives and in each case it seems only one CPU of my dual core CPU computer is recognized. System Monitor, Gkrellm and lscpu show just one when prior to the new install the old Wheezy showed both CPU's. I have put the hard drive into two other computers with dual core CPU's and all show just one CPU.
Interestingly System Profiler and Benchmark (hardinfo?) > Devices > Processors now show a large amount of processor infomation when with the old Wheezy I would only see both CPU's listed and nothing else.
View 14 Replies
View Related
Mar 14, 2011
I recently read in a forum that by default the Linux kernel only activates one of two cores in a dual core processor. Searching online gave one option to find out and that was the mpstat command. I therefore ran the command and got the following output.As the result says, it shows only 1 cpu. I was wondering what I could do to activate both cores in my machine, and whether doing so was going to cause me any problems.
View 14 Replies
View Related
Aug 28, 2010
I just upgraded my server, and now I am stuck at "Kernel panic- not synching: VFS: Unable to mount root fs on unknown-block(0,0)" I have read other suggestions about booting to previous kernels to reinstall latest kernel, but that doesn't work since I can't boot to any kernel. How can I fix this with the restore cd or from grub2 command line. Reinstalling is not an option as I have lots of configurations that I don't want to lose.
View 5 Replies
View Related
Nov 3, 2009
I just installed Windows 7 Ultimate on my computer and I want to install Fedora Core 11 and dual boot my system. I have been on the net looking around, but I can't seem to find any suggestions on how I would do this. Can someone help me or give me a URL(s) that will give me a step-by-step guide on how to install Fedora Core 11 on a Windows 7 computer?
View 4 Replies
View Related
May 11, 2011
I've been using Ubuntu 11.04 for some time now and I'm experiencing many severe bugs. One of this is very bothering and I still can't find a solution. I experienced many problems maybe related to this, but seems to have gone away by downgrading xserver-xorg-video-ati. Still anyway, when in dual screen, after some time, the screen completely freezes. The system is completely freezed, I can't even go to a shell, but I noticed it is possible to log in via ssh.
I've never had problems with ATI opensource drivers. Now I even noticed a logout problem anyway (which is known as far as I know). Is there anyone else experiencing the same? I found some others complaining about something similar, but not exactly the same and still no solution. Is it possible to somehow debug this when it happens? I have to note that I'm still using kernel version 2.6.35 because the new 2.6.38 is not booting at all. But I don't know whether this is the problem or not.
View 4 Replies
View Related
Feb 6, 2010
Scenario new-clean laptop computer "Hundyx W765TUN" with this test results:
Devices:
- Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz: well managed with Live-CD
- VGA NVIDIA G98M/GeForce-G105M: well managed with Live-CD
- CD/DVD Matshita UJ890AS: well managed with Live-CD
- Audio Intel ICH9/82801I: well managed with Live-CD
[Code]...
On every installation I've cleaned the MBR and made new partitioning at all for a single system. Tried to partition the disk manually and tried the "use entire disk" option with the automatic wizard. Same results on all cases, when the installation process goes well at all.
I've tried also to leave the computer some hours with the "GRUB Loading." message, but it doesn't move and remains with the same screen/text. Cursor remains blinking all the time under the GRUB message. In all cases Control+Alt+Del works to reboot. With hundreds of installations made, I've never found the same situation. It would be so strange to be a hardware issue.
View 9 Replies
View Related
May 22, 2010
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
View 9 Replies
View Related
Aug 11, 2011
I have a Lenovo Thinkpad T520 laptop with Nvidia NVS 4200m Graphics card. I installed Ubuntu 11.04.
Before I installed Ubuntu 11.04 I had went to my bios and disabled Nvidia Optiums and changed the graphics to Discrete Graphics. Then inserted my Ubuntu 11.04 CD and installed.
With this I had gotten unity to work. However when I pull the power cable from the laptop my screen freezes. Also if press "FN"+ Home or END to change the brightness of the screen my screen freezes and no longer able to move the mouse or press anything on keyboard.
Did anyone ever run into this problem and or fix this issue? I can get the graphics working properly with Ubuntu 11.04 with Unity with a Nvidia NVS 4200m graphics card.
View 2 Replies
View Related
May 14, 2011
The company im working at is planning to sell some of the old lappy One of them is this pentium3 laptop (for only 20 bucks DD)
the specs are:
pentium 3 1.1ghz
640MB ram
28GB hdd
wifi
Im wondering that if this machine is sufficient to run linux as a server I dont plan to use it for anything big just among me and a few friends Also, I dont rlly need any Desktop Environment as I can just ssh to this machine from my other laptops if I need to do any work on it.
Hence, my questions are as follows:
1. is this machine sufficient to run linux as a web/file server for me and a few friends?
2. also, is it okay to rlly run this laptop 24/7? (its a rlly old laptop after all)
3. lastly, altho I prefer using opensuse, but if I dont need any DE at all, would Arch be a better solution? (Its known to be very small and light)
View 9 Replies
View Related
Dec 21, 2010
On duel booting windows 7 and ubuntu on an hp laptop. All 4 partitions are taken up. I know i need to delete one partition to make room for ubuntu. Should I delete the windows recovery or hp partition? Or is there another option?
View 5 Replies
View Related
Mar 8, 2011
I will be buying a laptop in the coming months for college and my intention is to run Ubuntu as my primary operating system, but I still want to have Windows 7 as a crutch. I know there are multiple ways to do this (Wubi, seperate hard drives etc.) but I was wondering if it were possible to just install it and if there were an option to partition your existing hard drive so they are virtually seperate from each other.
View 5 Replies
View Related
Dec 11, 2010
I'm a complete an utter newbie on this forum, and indeed to linux/ubuntu in general so pardon me in advance if some of my question makes no sense/sounds silly/makes you want to exterminate all noobs. Basically, I've had bad experiences (i.e. had to use my recovery system) trying to install a dual boot system with OpenSuse and want to get some sound advice before I proceed with installing Ubuntu, instead of having to go through the agony of formatting and recovering Vista HP again, and consequently trying to teach it all over again how to suck less.
Okay, so less waffle and more questioning. Background information is that the laptop is a Compaq F560. It has at present Win Vista 32 HP on the primary partition (C), with a recovery partition on (D). It has a very basic, almost un-alterable BIOS, 1.5Gb of RAM, 120Gb HD, standard CD rom, integral nVidia 6100m graphics card, a broadcom wireless network adaptor and various other bits n' bobs.
When installing OpenSuse last time I found 2 huge flaws with my method. First one is, that I didn't have wired networking available to me at the time, and foolishly forgot to get hold of the wireless adaptor drivers before installing Suse. No biggy you say, just go back to windows and download from there. Great, except I'd bozzed up the MBR too, so couldn't do that. Suse, for it's part, ran fine. Very smooth. I just couldn't do anything with it.
What I'm now looking to do, is give Ubuntu a shot, as part of a dual boot system, with Vista on the other half. I want to make vista the default boot system. I DONT want to have to go through my compaq's recovery system again, if possible. To meet these objectives, Ultimately, I'd like to transfer all of my operations across to Ubuntu, but I'm too windows-dependent at the moment, though some sort of windows-emulator wouldn't be a bad idea if anyone knows where/how/what.
View 3 Replies
View Related
May 19, 2011
I put Ubuntu on my G60 hp laptop a few months ago and have not touched Windows 7 since. How do I go about removing windows and leave linux with access to the entire hard drive?
View 9 Replies
View Related
Jun 10, 2011
Im looking at getting a laptop and dual botting it with ubuntu and windows and my boss said when he did that on his laptop it caused all kind of problems, but that was 2-3 years ago. Is it still a big buggy doing this or should i be able to dual boot on any laptop i get?
View 4 Replies
View Related
Mar 30, 2010
what version of Ubuntu (or k, x, null prefixes on Ubuntu...) would you recommend for this dated machine?
Pentium 4 2.0 GHz
256 MB RAM
View 9 Replies
View Related
Feb 1, 2010
I recently bought a refurbished HP Compaq NC6000 which had a new installation of Win XP put on it but takes about 5 attempts to boot up as it just sat at the load screen and freezes. So I decided to install Ubuntu 9.10 as a Dual boot with the view to getting rid of XP once I had Ubuntu up and running, which I have now. So cant understand why XP wouldn't work lol. Now I would like to fully get rid of XP and just have Ubuntu as the only OS on the laptop. Currently as it is Dual Boot I have my 80gig Hard drive partitioned with both OS�s on it.
Could someone point me in the right direction of how to get rid of XP cleanly so I just have Ubuntu left on my machine. I don�t really want to re-install Ubuntu as I have spent the last week getting it set up, so would it be possible just to get rid of XP? Also would getting rid of XP mess up the Grub Boot loader menu?
View 9 Replies
View Related
Apr 7, 2009
I just searched the forum for ibex and nothing turned up - but I've recently had a surprising experience worthy of a thread (IMHO). Used to be an UBUNTU devotee, until this and working at netuxo.com which is taking me to debian...
Was making a dual boot laptop, and found that on THREE seperate attempts UBUNTU ibex, whilst it would of course make a near flawless laptop install replete with wi-fi it would NOT permit windoze to remain in the MBR or indeed on the drive. In a fashion reminiscent of M$ it took a fascist attitude and insisted on owning the machine, in one case actually stealing the partition, despite selecting option to only use free space. In the other two it just messed the MBR up.
View 6 Replies
View Related
Oct 11, 2010
Installing Ubuntu on the laptop said it succeeded and required a restart, then before shutting down and after the cd popped out a string of
end_request: I/O error dev sr0, sector 2xxxxxx...
end_request: I/O error dev sr0, sector
end_request: I/O error dev sr0, sector
Thing is, grub didn't install! I'm pretty sure a full install of ubuntu 10.10 in on a partition that I can't access. To complicate matters further, loading Vista necessitated a restart when it installed a "generic volume driver" by itself. Restarting vista doesn't show any difference (obviously since vista can't see linux formatted partitions).
View 3 Replies
View Related
May 2, 2010
I have a dual-core computer that I just upgraded to lucid lynx. when looking at the system monitor, one of the cpu's is always running at 100% and its not always the same one. Is this normal or do I have an issue? I would really like some info.
View 7 Replies
View Related
Jul 31, 2010
Anyone here installed 10.04 on Pentium III's? I have tried installs on 5 of them and have had 5 video failures. These machines all currently run various earlier Ubuntu releases (8.04, 9.04, etc). All of them have 512 M memory but video memory is 32M or less. I have installed 10.04 successfully on 2 Pentium IV's that have 128M video memory so I suspect that's the difference. Is there any trick I'm missing to get the new XRANDR working on these old P-IIIs or should I give up? What I get when bringing up 10.04 from live CD is just a black screen... as 10.04 appears to grind to a halt or just hang.
View 4 Replies
View Related
Aug 18, 2010
I just installed 10.04 Desktop onto an external USB disk and used it to boot an old Acer Veriton 7600G with a Pentium 4 CPU clocked at 2.80 GHz, 3 Gb of memory and an AGP Sapphire ATI Radeon video card with 512 Mb of DDR2. With nothing running, nothing swapping, only 7% of memory in use, and around 11% of both CPUs, this system is so slow that with no programs running it takes about 5 seconds to switch between dropdown menus in the main Applications/Places/System menu. The standard GMatrix screensaver takes forever to crank out a single character.
View 5 Replies
View Related
Jun 9, 2010
I am looking to buy a laptop for my college years, so I would like to buy one that will serve me many years ahead. Currently the only laptop I have found is the System76 Serval laptop, but they do not ship to Europe.
Another laptops I have found are the Toshiba A505 series, but they are not currently supported by the latest version of Ubuntu.
I anyone knows of a good laptop (must have Corei7 processor and Nvidia/ATI powerful card fully supported by the proprietray drivers), please share your knowledge here.
View 5 Replies
View Related
