Ubuntu Servers :: Freezes Completely When Copy Big Files Over Smb
Oct 11, 2010
I have installed ubuntu server 10.04 LTS on my NAS (Thecus N5200 Pro). It runs in much points better than the original firmware (I can do a lot of things more). But I have also 2 problems remaining with configuring my NAS
1. Ubuntu freezes completely when I copy big files over smb. I first thougth it is an overheating problem, but it don't seems so.
2. My raid (raidd 5) resyncs very often. The problem is that the NAS isn't on 24/7. It is only on when I need it.
View 1 Replies
ADVERTISEMENT
Jun 6, 2010
Firefox grays out and doesn't unfreeze until the entire upload is complete.I can't do anything else on the internet while this is happening.This didn't bother me until now, because I need to upload some pretty high quality pictures to Flickr, and it takes about fifteen or twenty minutes to do so.I'd like if the pictures could simply upload in the background while I do other stuff, instead of completely freezing my internet usage in the process.I don't have a problem downloading files quietly in the background not even large files so why can't I upload files without freezing everything up? Is this normal, or is there a fix for this?
View 5 Replies
View Related
Nov 20, 2010
I'v been trying to install Ubuntu (and actually all other dists of linux (in hope of succes), but running ubuntu on my other machines and prefer it) on my old laptop. Laptop Acer Aspire 1312XC. Have just run a 24 hour RAM test it turned out ok. Have tried with other RAM blocks in aswell. The install freezes at random points in the installation. Mainly when trying to copy files to the hard drive. The only thing i've succeded in installing was Ubuntu server and windows XP. I have tried with ACPI off and all the other special atributes. No success so far.
View 8 Replies
View Related
Jun 8, 2010
Is it possible to copy files from Ubuntu Server 9.10s to a USB Flash drive?
View 1 Replies
View Related
Jan 9, 2011
I am on ubuntu 11.04 and have had it since 10.10. For some reason when I am working on something whether it be on internet or listening to music after about 45 minutes of working ubuntu completely freezes and I cant do anything. Can someone please help me I really love ubuntu I just dont no any code so I tried researching the subject but dont understand the lingo and code.
View 4 Replies
View Related
Apr 13, 2011
I am attempting to copy files from one server to an external USB drive on a second server. Both servers are running custom RedHat Linux, kernel 2.6. Both are setup as Check Point SecurePlatform (one is a log server and the other a management server). I am trying to archive files from one (HP DL380 G5) to the second (HP DL380 G6). I am not able to archive directly to the external usb drive when connected to the HP DL380 G5 (data gets corrupted and switches to read-only access). The external USB drive has no issues when connected to the HP DL380 G6 server, thus my reason for trying to copy the files across servers.
When I attempt to use scp to copy files between the server, I am prompted for the password. Once entered the debug shows the authentication is successful, but then no files are copied (see log below). I have tried searching for potential answers, but none have panned out. Unfortunately I can't yet post the actual scp debug log output as some of the text is viewed as a URL and not yet allowed for me. I have changed all the atsign symbols to '(a)' to avoid the URL inference.
Output log from scp attempt follows:
[Expert(a)server1]# scp -p -r -v /var/fromhere/* copyfile(a)server2:/media/disk/tohere/
Executing: program /usr/bin/ssh host server2, user copyfile, command scp -v -r -p -d -t /media/disk/tohere/
OpenSSH_3.6.1p2, SSH protocols 1.5/2.0, OpenSSL 0x0090707f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: Connecting to server2 [192.168.10.3] port 22.
debug1: Connection established.
debug1: identity file /root/.ssh/identity type -1 .....
debug1: Exit status 1
lost connection
[Expert(a)server1]#
View 1 Replies
View Related
Apr 18, 2010
First off. I'm not using Ubuntu Server. But I'm trying to get XAMPP set up so I can test Wordpress themes I make. Using 9.10. I got XAMPP installed using the Instructions from Apache Friends. When I went to Localhost I got the language page. Selected English but nothing happened.
Here's my Index.php:
Code:
<?php
if (!empty($_SERVER['HTTPS']) && ('on' == $_SERVER['HTTPS'])) {
$uri = 'https://';
} else {
$uri = 'http://';
}
$uri .= $_SERVER['HTTP_HOST'];
header('Location: '.$uri.'/xampp/');
exit;
?>
Something is wrong with the XAMPP installation :-( I searched and found a couple Index.php files. Deleted one. And now when I go to localhost I get a "Index of" page.I removed the XAMPP folder, Deleted Apache, PHP from Synaptic(They got reinstalled when i reinstalled XAMPP btw). Installed LAMP but it still does it. Maybe reinstall XAPP and copy the index.php files from another Comp?.
View 3 Replies
View Related
Feb 9, 2011
I am installing Ubuntu for the first time as a result of my Programming teacher starting me on a webserver project that will not work on windows. I dug up an older Dell, about 5 years old, and I keep getting install errors Just under halfway through. The OS will completely freeze for a few minutes then say 'errno 5'.
View 7 Replies
View Related
Jul 11, 2011
Very annoying problem, just build a new PC, new 500GB HDD and:
AMD Processeur Phenom II X4 955 Black Edition 3.2 GHz - 125W
GSkill RipJawsX 4Go DDR3 C9 1600Mhz
Carte m�re socket AM3 - Chipset AMD 880G & SB710
Installed ubuntu 11.04, and now extremely randomely, it freezes completely, cannot get to a console, ie CTRL+ALT+F1, ALT+F2, the mouse do not even move. I have to turn it off and restart. It may not happen for a whole day as it can happen 2 or three times in a row. From what I have gathered, it only happens when I use the PC as I can't remember coming to the PC and finding it frozen. From searching the forum, some people seems to have problem because of the 4 cores of the phenom, but it was very vague.
How can I know better what is happening and how to fix it. I have so little time, I really would love to avoid re-isntalling the whole thing again, as it is properly setup at last.
View 9 Replies
View Related
May 16, 2011
Well i've been having a problem that my computer randomly completely freezes. A while ago, it happened again, but i wasnt able to log back in anymore, getting this screen when gdm tries to load URL...
View 5 Replies
View Related
Nov 18, 2010
We are experiencing problems copying files from a server to server where the machine issuing the copy is a 32-bit lucid and the mount drive is a 64-bit server. I have no other information but the md5's are consistently different after doing a copy. The files are > 8mb.
View 2 Replies
View Related
May 1, 2011
when Gnome starts my Desktop completely freezes. So I decided to reinstall and install Gnome2. When Debian is freshly installed I still need to configure and install my ATI 6950 Graphic card and the X config. Since the latest drivers from ATI I can use the --initial config from ATI. This all seems to work. But also when I use Gnome2 my screen completely freezes. I don't see any special things in my logs. I do remember that with my previous PC I had the same problem. This was the "first" reason why I left Debian for my desktop.
View 1 Replies
View Related
Jan 7, 2010
I have some cds that have tracks that run right into each other (ie one finishes and seamlessly moves into the next one without pause). How can I backup my cds retaining their original sound?Prior to Ubuntu days, I used to just rip in mediaplayer in windows and then use then use that playlist to burn to a cd.
View 1 Replies
View Related
Aug 26, 2010
Sometimes, (the most when I'm making changes in something, like the pager, appearance, theme, etc), the screen freezes completely (but mouse is moving) and I have to restart the system.
If I try it again, it crashes at the same point.
View 4 Replies
View Related
Sep 12, 2010
I'm running 11.3, 64bit.It downloads everything fine, but not long after it starts installing things, my PC completely freezes. I tried giving it 20 minutes, but it didn't seem to want to come back to me.What does this mean? Is my OpenSUSE broken?
View 3 Replies
View Related
Jul 9, 2010
just installed ubuntu couple of days back on my netbook. I am still a beginner, enjoying my adventure exploring ubuntu. I have another desktop which runs on XP. I am able to access XP shared folders through my netbook(linux). However, i wanted to copy files from XP infact folders using TERMINAL in my netbook, not copy and paste using my mouse. Are there any commands for it?
View 1 Replies
View Related
Sep 1, 2010
I have a 160GB harddrive which I installed a F12, would like to upgrade to a bigger drive, but I hate to have to re-install everything.
Recommend a good disk copy utility? The utility should be able to not only copy files, but boot sector and everything. So I just need to make a copy, change my BIOS to boot from the new drive and run everything as before.
View 11 Replies
View Related
Jan 9, 2011
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies
View Related
Feb 27, 2010
It turns out I caught the Linux bug. I'm now completely obsessed with it. Most of the time if I can't get something to work I do a quick web search, and I find the solution to my problem in the first link or three. This is the exception. I wanted to install XP or 2000 using Virtualbox OSE just in case I needed to look up something on Windows or print something off (can't find any drivers for my Lexmark printer). I tried XP first and it gave me an error. Then I tried 2000. At this point I went to delete the program and try again. The first thing I tried was sudo apt-get remove virtualbox. Then when I re-installed it, I still had my settings and partitions on there. I then went to the add/remove programs. Same thing after the third install. I then went to the Synaptic Package Manager and clicked completely delete files (or however it was worded). After the install it still did the same thing as the previous times. When I try and load Virtualbox it says "FATAL: No bootable medium found! System halted.". Also sometimes my pointer will get locked inside Windows. How do I get out of that? The only thing I was able to find was hit CTRL + ALT + Back and it exits both Windows and Linux.
View 8 Replies
View Related
Dec 16, 2010
I used synaptic package manager to remove tomboy notes and marked it for complete removal. But when I typed "locate tomboy" in the terminal window there were over 50 folders or files listed. Is there a single command I can use to remove all these or do they have to be deleted one by one.
View 4 Replies
View Related
Aug 31, 2010
I installed Ubuntu 10.04 half a year ago and everything's been fine and dandy up to recently.I'm running dualboot with Windows 7, and a few days ago when I was in Ubuntu, the whole thing just froze while my CAPS button was flashing like a maniac. Had to unplug my power to reboot.Thinking this was just a one-time case I carried on and booted in again, but same thing happened just a few minutes after everything started up. I have now tried to boot into Ubuntu 5 times, but each time the CAPS button just flashes and I have to unplug the power.
I'm just wondering if there is a quick solution to this, or do I have to reinstall?First time I'm posting here, but I've been watching these forums for quite some time and been able to google myself to workarounds for almost everything,
View 1 Replies
View Related
Jan 12, 2010
Depending on whether I launched it with gnome do or the main menu I got a different 'version' of spotify, I could tell this because it had different searches remembered. I tried removing wine and spotify and gnome do via synaptic and completely remove and then the option to remove configuration files left over. I did a search and there were loads of wine files left so I just deleted. When I reinstalled wine, spotify and gnome do the same problem occurred.
Also Firefox started crashing ubuntu, just freezing it, so I tried to uninstall completely, but when I restarted it kept the same add ons and still crashed. So I uninstalled again and tried to delete all firefox folders but I can't work out how to do it as root.
View 8 Replies
View Related
Apr 19, 2011
If I move a file to the trash,I can restore it later.But if I empty the trash,I'll be warned that I cannot recover the files if I proceed.Is this really true or are there Linux applications for recovering files deleted from the trash?Uhm...are the files deleted completely and unrecoverably or are there any traces left behind?
View 6 Replies
View Related
Feb 20, 2011
Is there a method at the command line to copy files from one location to another and retain the source files group and user?I'm migrating some MySQL files from one machine to another.I want to back-up the original files in the directory presently. They have owner:group of mysql, some have owner:group root:mysql and so on. To copy them under cli or Nautilus everything changes to root for I execute sudo cp or gksudo nautilus and copy via gui.
Since it is MySQL data I could simply do a dump of the database and restore it on the other machine. But there's about 20 db's and I want to do this via a copy for it will be faster - at least that is what I think.
View 5 Replies
View Related
Aug 25, 2009
How can you create a script to move or copy files from a main directory into multiple directories below the main directory.
View 7 Replies
View Related
Mar 11, 2010
Due to lack of concentration, I inadvertantly ran PClinux(2009-2)'s "install.sh" while I was in openSuse 11.1. This file says:
grub --device-map=/boot/grub/device.map --batch <<EOF
root (hd0,6)
setup --stage2=/boot/grub/stage2 (hd0,6)
quit
EOF
I soon found out that Suse 11.1 would no longer boot from boot.ini (using bootpart) because the boot process now brings up PCLOS (in /dev/sda6) rather than Suse 11.1 sitting in /dev/sda5. No problem, I thought, I'll boot from the Suse install DVD, use repair, and away I go. Wrong. After grinding, it started mentioning about generating something for sda13, which is my last partition. NTFS! So I bailed before it got too far. I even tried "rescue" option on the DVD, command prompt, and grub commands to reinstall via "setup.
Then I tried to use Super Grub Disk (.97xx) to reinstall the PBR, stage 1 and stage 2 loaders. Didn't change a thing. So then I used Grub4DOS and got into my Suse 11.1 installation using this in its menu.lst:
title openSUSE 11.1 - 2.6.27.45-0.1
[Code]...
Worked fine, and is now my (only) method of booting to 11.1. So obviously it's bypassing stage 1 and 2 files, using it's native Grub4DOS code. But then I tried Yast-Bootloader to reinstall Grub's files. No difference. Then I used the advanced part to "write bootloader code to disk" No difference. Even tried "propose a new boot scheme" (or whatnot) no difference. After looking at all this, I've come to the conclusion that the PBR code in sda5 is scraunched, and/or stage 1 code (although it's still the original date), or stage 2 (which definitely had a new timestamp of when I committed the fatal error by executing PCLOS's "install.sh".
So my question is this: How do I do a good COMPLETE re-install of Suse's version of the grub files? Because, for sure, grub commands like "setup --stage2=/boot/grub/stage2 (hd0,5), and variations thereof, certainly aren't doing it? My reasoning is that I should make sure that all the boot files get restored/confirmed as "originally installed by Suse".
View 9 Replies
View Related
Dec 2, 2010
how to write a script so that when I use the 'del' command it removes/sends the files / folders to a I specify for example 'dustbin'
View 1 Replies
View Related
Feb 1, 2011
When i installed ubuntu. I made a seperate partition so that i could copy an ISO image onto it of an up-to-date version of ubuntu. I wanted to then boot the ISO up so i could install the version that way.I've already tried doing it through the update manager but it'll download, almost be done with installing and it freezes on me. so i figured this would be easier. However i do not know how to gain access to the other partition to copy the ISO image.
View 6 Replies
View Related
Jun 8, 2010
I have many files and folders in my source folder. I want to copy some files and folders from that source folder to destination folder. What should be require to given with the "cp" command?
View 1 Replies
View Related
Oct 8, 2010
I am having difficulty installing Ubuntu on a new PC. Hardware is thus:MB: ASUS M4N68T-MCPU AMD Phenom II 3.2 GHzMem: Kingston 2GB DDR3-1800HDD: Seagate Barracuda 80 GB SATAvideo is on-board, cannot find the details regarding chipset.I have tried both 7.10 and 10.10 (would prefer to use 7.10) but both versions hang at the same point during installation.Live mode works fine on both versions.Tried burning 7.10 to CD at 4x write speed.Set MB bios "Plug and Play OS" to yes.When it hangs, the mouse freezes, then the video wigs out (think Van Gogh on acid) and only a hard power down will un-freeze it.
View 4 Replies
View Related
