Ubuntu Installation :: 10.04 - GNU Grub Version (Recovery Mode)
Feb 26, 2011
I am trying to install ubuntu 10.04. I had ubuntu 10.10 but I want to install 10.04 (32 bit) because 10.10 is slow. Problems with cd drive/cd caused installation to be incomplete so system cannot reboot at all.
I just tried the "Try Ubuntu without installing" option and got
Gnu Grub Version 1.98+20100804-5ubuntu3
Ubuntu, with Linux 2.6.35-25-generic
Ubuntu, with Linux 2.6.35-25-generic (recovery mode)
Ubuntu, with Linux 2.6.35-24-generic
Ubuntu, with Linux 2.6.35-24-generic (recovery mode)
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery mode)
Memory test (memtest86+)
Memory test (memtes86+, serial console 115200)
Which should I select? and what do I do to go on to install/reinstall 10.04?
View 3 Replies
ADVERTISEMENT
Jul 3, 2010
I used to have a grub menu with options of
*Ubuntu
*Ubuntu Recovery Mode
*Memtest
and
*Windows
but later I installed Ubuntu alone on a machine , and i do not have GRUB menu. and i want to enter the Recovery mode.
View 8 Replies
View Related
Apr 30, 2011
I started a thread over in installations and upgrades in which I was trying to upgrade from Ubuntu 10.04 to 10.10 using the upgrade manager. My computer froze in the middle of the process, requiring me to restart my computer. When I try rebooting Ubuntu, I get an error message "The configuration defaults for Gnome power manager have not been installed correctly" and then a blank screen. No mouse pointer, no cursor. It will not take me to the Ubuntu desktop screen. I've already found the sudo commands I can run to try and fix Ubuntu. They are as follows:
sudo apt-get clean (If the problem is not having enough free hard drive space)
sudo dpkg --configure -a (If the problem deals with the upgrade installation process)
However, what I can't get is the terminal to come up to run these commands. In the other thread I started, someone mentioned that in the Grub menu, you can choose "recovery mode", hit "enter" to boot it, and it will give you a menu of options to choose from. However, when I choose "recovery mode" and hit "enter", I do not get a menu but instead 3 pages of data about my computer that ends with this:
"Begin: Running/scripts/init-bottom...
Done. "
It gives me a blinking cursor at the very end but I cannot type anything and I cannot page up to see the 3 pages of data. What I am looking for is a way to get to the recovery mode menu OR somehow open up a terminal so I can run the sudo commands. My computer automatically logs me in, so I do not get a login screen and Ctrl+Alt+F1 does not work for me. Anyone know how I can open a terminal with only access to the Grub menu? Perhaps a BASH command that I can use in the command line that will open up a terminal? To summarize: My computer does not boot Ubuntu. I get an error message followed by a blank screen. It does not go into the desktop screen so I cannot choose Applications->Accessories->Terminal.
My Grub menu consists of Ubuntu and it's version, Ubuntu and it's version with recovery mode, memtest, and Windows XP (I have a dual boot system). In the Grub menu, I can select "e" for edit, "c" for command line and "enter" to boot either regular Ubuntu OS or Ubuntu recovery mode. "Sudo" commands are not recognize if I choose the command line for either Ubuntu OS or recovery mode. I have a Live CD for 10.04 but you cannot run sudo commands because you do not have access to root on the Live CD.
View 1 Replies
View Related
Mar 25, 2010
I just tried ubuntu 9.10 in recovery mode i came to know that i can change root passwd without knowing the password then i can change password of every user by logging in as root
View 2 Replies
View Related
Aug 18, 2010
I've got a, as it seems to me, strange problem.I've inadvertently deleted my user from the group admin so I'm in the same situation of a lot of other users (read a lot of messages about it).My problem is that when restarted in recovery mode there is no way I can choose the 'drop to the root shell' or similar in the menu.The menu appears for a second and then I've got an empty screen. If I press a key I've been requested for a username and password that of course is not what I need.
View 2 Replies
View Related
May 4, 2010
recovering a partial upgrade to Lucid.
4 core Xeon , was running 64 bit 9.10.
Upgrading over the weekend, but it failed, and suggested running dpkg-reconfigure -a
I couldn't launch any terminal/xterm windows, and couldn't login via ssh (kicked me out with xmalloc failure) or through a virtual console (showed garbled characters)
So I had to reboot.
Now the boot process -- I've tried recovery mode for all othe kernels I've got installed, but all fail in the same way:
Code:
Begin: Starting AppArmor profiles...
bash: xmalloc: ../bash/locale.c:73: cannot allotate 225469542417 bytes (0 bytes allocated)
Failure: AppArmor profiles failed to load.
[Code]....
It looks like it might be a libc problem. At any rate, I'd like to get into a recovery console to restart the update.
View 4 Replies
View Related
Jun 7, 2011
I installed Ubuntu 10.04 32 bit on an Acer Aspire 7520 laptop running Vista.Thereafter, Vista could only be run via the "Windows Recovery Environment" grub menu option, which is on /dev/sda2. However, within Vista than the wireless network is not functioning any more. It has given lot of headaches to find a way out. Unsuccessful, so far.
View 9 Replies
View Related
Jan 19, 2010
After upgrading to 9.10 Karmic Koala, my Amilo Laptop (AMD64) refuses to boot. I installed GRUB2 which works fine for my WinXP ... and Karmic will boot in recovery mode.
When trying a normal boot, I get a black screen. CRTL-ALT-F1 yields just a blinking cursor. The system will immediately reboot when pressing CRTL-ALT-Entf.
When booting in recovery mode, I choose "Resume normal boot" from the menu, log in while in cosole mode and enter "startx" ... and the grafic environtment works fine!
Why does the system work in recovery mode, but does not start with a normal boot?
Fly.By.Wire
Here's some information on my system:
cat /proc/version
Linux version 2.6.31-17-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu ) #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009
lshw
mistral
description: Notebook
product: Amilo A3667G Series
vendor: FUJITSU SIEMENS
[Code]....
View 2 Replies
View Related
Nov 18, 2010
I attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies
View Related
Jun 12, 2010
I have a problem, so I boot in recovery mode. The Recovery Mode menu comes up, but when I press a cursor key, the purple Ubuntu screen comes up. I cannot get to the menu items that I need!
The recovery mode is supposed to provide a failsafe text-only environment.
Does anyone know what app puts up the purple screen?
I would really like to remove it. I tried to install xdm, which I prefer, but keep running into the purple screen. - With XDM installed, the purple screen comes up and blocks you from seeing anything. Fortunately, remote login by RDP still works. - If you switch console (CTRL+ALT+Fn) back and forth a few times, the purple screen appears again. You have to go to a new console (F8 or even F9 instead of F7) and begin a new Gnome session. Eventually you run out of function keys...
Perhaps I'm using the wrong distribution. Ubuntu is friendly, but you pretty much have to use it exactly as it installs. Can someone recommend a distribution that puts more emphasis on stability?
View 1 Replies
View Related
Sep 4, 2010
So I decided to try Ubuntu from a live USB drive 10.04 LTS on my Toshiba laptop as the windows Vista SP2 was running really slow. I liked it and clicked on the install icon. From there I set it for duel boot and off it went. The install worked great. I then downloaded the startup manager and changed the start up to be default of windows loader. Now when it boots into windows it goes to the windows recovery thing and won't start windows.
View 9 Replies
View Related
Dec 7, 2010
I accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies
View Related
Oct 14, 2014
I have added to Debian Wheezy testing repositories. After a restart there is no desktop anymore just the wallpaper picture is visible but no desktop pop-ups.
When I want to install the desktop through recovery mode, I get an error message that it "can't fetch...repos". How I can repair /etc/apt/sources.list through recovery mode?
View 3 Replies
View Related
Apr 30, 2011
I updated to 11.04 recently, no problem. Chose to merge the old and new Grub files together. Rebooted to finalize everything, and my Grub menu had lots of doubling up of options, the old kernel, as well as two options of Windows XP (the old option that I'd put on Grub, and what I suspect was 11.04's recognition of another partition, as it was titled "Windows XP ... (on dev/sda2)")Then I fired up Grub Customizer, re-read and double checked everything, and removed all the doubling instances. All good. Shut down for the evening.
Booted up the PC this afternoon and my Grub menu looks thus (adjusted with artistic license, just so you get the picture):Windows XPUbuntu 11.04 (recovery mode)MemtestMemtestDell Utility PartitionWindows XP (on dev/sda2)I've lost the option to choose regular Ubuntu.I've gone into recovery mode, tried the "Update Grub" option, rebooted, but nothing changes.Now, there's a terminal login on Recovery Mode. I am effectively an Absolute Beginner when it comes to the terminal - I know a couple of commands, am eager to learn more when I have the time, but really couldn't tell you what the hell I'm doing. The last thing I want to do is make this worse by fumbling through code. This isn't Zork.If anybody would be kind enough to provide the terminal commands to change the Grub menu to add regular partitions, I'd be very grateful. If there's a different fix, equally good. If anybody's got any comments, diagnoses, verbal abuse, heap it on. I'm here to learn.
View 2 Replies
View Related
Jan 4, 2011
Ubuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
View 9 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Mar 8, 2009
I have a laptop which was originally running Windows Vista, I attempted to install Windows XP on via USB since the laptop couldn't boot the install disk (this has turned out to be a bad disk drive. This fell flat on its back and wouldn't even finish the install (although not before formating the Vista install in to oblivion). Although I was extremely careful to leave the Vista recovery intact. So I managed to get Ubuntu 8.10 (XFCE if that makes any difference) installed over USB. I was wondering, Could I use the GRUB louder to boot into the recovery drive? Laptop is a Toshiba Equium L350D
View 7 Replies
View Related
Aug 19, 2010
I'm having an issue installing Ubuntu with Windows 7 Home Premium 64-bit through Wubi. The Wubi installation works great and Ubuntu seems to install after the first reboot after selecting Ubuntu from Windows' boot menu, however whenever I select Ubuntu from Windows' boot menu after Ubuntu installs and it reboots for the second time, it loads the GRUB bootloader, however Ubuntu isn't listed at all.
Windows 7 is listed twice and Windows Vista is listed (seems it picks up the recovery partition for Windows 7 as Vista) and when I select the first Windows 7 from the GRUB bootloader, it just goes back to Windows' boot menu with Windows 7 and Ubuntu as the selections. If I select the second Windows 7 from the GRUB bootloader, it'll boot Windows 7 like normally. It looks like Ubuntu is nowhere to be found. Because of that, I just ended up uninstalling it.
View 4 Replies
View Related
May 1, 2010
How do I get int recovery mode in Ubuntu 10.04?
View 2 Replies
View Related
Jun 17, 2010
ok so i have been haviung the same problem for a while now and it is starting to **** me off, with every distribution of ubuntu i am getting thuis stupid message when i log in it is ionoly every once i a while that i get it but saince i have upgraded to 220.04 cannot fix it. i could fix it befor pretty easily, the probklem is when i get t o the login screen i get this generic login menu whne i attept to login i get this message somethiung like power management is not installed correctly. like i said b4 it was easy to fix, all i would do is to go to the ubuntu recovery thing, which is apparently not available ion 10.04 it does not evn give me a choice which to boot how do i get to recover mode in ubuntu 10.04?
View 2 Replies
View Related
May 22, 2010
I run 9.10 from a live usb with persistece, and got /etc/sudoers awfully messed up. now i'm told to fix in through 'recovery mode', but i don't think live usb has one. is that true? what about my sudoers? is there another way to fix it?
View 3 Replies
View Related
Jul 19, 2010
Afraid I'm an utter newbie. I'm using 10.04 64 bit. I only noticed this after I tried to install the NVIDIA driver and all my ubuntu os'es blackscreened after restart. Because I couldn't even access recovery mode, I ended up reinstalling ubuntu, overwriting the old root.I thought the problem was due to the driver, but it's even now persisting. I can run the terminal (within X?) but if I try ctl alt <F1-6>, the screen just freezes until I do ctl alt F7. Furthermore, recovery mode still leaves a black screen after the initial loading text. I need it to work before I attempt reinstalling the NVIDIA drivers again, as I don't want to reinstall the OS and all the programs.
Sometimes it feels like I can do stuff in recovery mode, like Ctl Alt Delete or sudo shutdown, but sometimes not. Not sure if this is related, but grub also lists windows vista and windows recovery as the opposite they should be (I thought my windows was completely screwed until I tried windows recovery).
View 9 Replies
View Related
Nov 21, 2010
I have a HP mini 2133 with Ubuntu 10.04 NBR installed, but because the CMOS battery went flat and the date on the BIOS got reset to 1980, I now get a failure starting the machine (Superblock failure: Last mount time is in the future). I've already googled on this error, and the general advise seems to be "run fschk and let it complete", but my question is...I don't get a grub screen come up when Ubuntu boots, and Contrl/Alt/F* doesn't bring me to any login windows. So how do I interrupt the startup, and get to a login window before I get the mount error.
View 1 Replies
View Related
Mar 31, 2011
I messed up my video drivers and now can't get into recovery mode. Pressing the shift key isn't working. All that happens is the splash screen appears in faded looking colors and then fades to white.
I've got an ASUS N61 laptop with an ATI Radeon 5730 graphics card. I just upgraded to 10.10 from 10.4 and was trying to install the open source video drivers. I must have messed something up and can't get to the terminal now.
View 3 Replies
View Related
Apr 6, 2011
I'm having a huge problem right now and I could use some help deciphering what's wrong.I can't get my system to boot (see signature) and even the recovery mode is buggered. henever I try to boot, all I get is a flashing underscore. This is the same for both the normal and recovery modes Kernels. I've run the boot info script from a live cd and I've attached it to this post.
View 9 Replies
View Related
Jul 22, 2011
Ubuntu cannot boot. says Starting system V runlevel compatibility [fail]it is after replacing xorg.I want to enter in recovery mode. But when i try escape it just enters bios. if i try holding shift it just does nothing.So how to enter recovery mode in ubuntu 11.04 i just cannot get to grub menu.
View 3 Replies
View Related
Mar 8, 2010
This is an urgent problem. I removed my propreitary ati display drivers because I had to update them but I don't know what happened. Now I can't boot. The screen shows the Ubuntu splash screen but then the login screen does not come on. I get a blank screen. Worst of all, I had removed Recovery entries from the grub so I can't boot into recovery mode so easily. It's urgent. I don't want to reinstall with my exams a week away.
View 2 Replies
View Related
May 9, 2010
in Ubuntu 10.04 I would like to enter in recovery mode, so I restarted computer and pressed <Esc> key just like in any previous version, but nothing happens Ubuntu still starts to boot.
How to enter into recovery mode in the latest version of Ubuntu?
View 3 Replies
View Related
May 18, 2010
I'm running 9.04 on a Powerbook G4 and, long story short, I accidentially put it into hibernate mode. When I try to turn it on, I am greeted with a blank screen after the bootloader. Unfortunately I can find no way to get out of this, since I'm using yaboot instead of grub. I can access my yaboot.conf file if I mount the HD from a live CD, but is there something I can put in there to tell it not to try to resume from hibernation? Or would deleting the swap partition at hda4 that apparently contains my hibernation data solve the problem?
View 8 Replies
View Related
Jul 6, 2010
I installed lucid last week, and this morning installed some updates that appeared in update manager and then started having issues with permissions so I rebooted. Now when I try and log in I get the message Authentication Error Normally this wouldn't be a problem I would reboot again hit ESC just before loading Grub appeared and go into recovery mode and change the password for my master user. But I never get the chance to press ESC, and even I hold the key down from the time my BIOS flash screen is up, I never get the GRUB menu.
View 1 Replies
View Related
