Ubuntu Installation :: Lucid: Weird "Ghost" Windows Persist?
May 3, 2010
Three lucid install, three different situations. The only one that seemed to be a problem was on an old Gateway 450ROG laptop (6 years old). All windows that open in GNOME leave behind faint and persistent outlines long after they are closed. These outlines are not functional and are quite faint. The panels also have a pattern of small dots all over them. Any thoughts? Is the screen dying or is this a fixable issue. I didn't notice the problem until the install. Karmic was working fine. I am probably best considered an "enlightened idiot" in Linux-land. If you need me to give you information, kindly tell me how to go about getting it from the system for you.
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
We have a Fedora11 installation that we Ghosted (Norton Ghost) to a bigger Hard Disk because the old one was failing
I know there is an extra step for linux where you fix fstab because it points to all the wrong locations, could someone walk me through this or link me to somewhere that can walk me through it?
Do I need to do this editing from a Fedora 11 Live CD (as its gone missing) or will a Fedora 13 CD do the trick?
I'm having a problem which seems restricted to Fedora. I'm trying to install Fedora 10 on a dual boot system. I have Windows 7 RC installed. When I boot the live CD to run Fedora, my screen ends up displaying Fedora on the left half, and bits of the Windows shut down screen on the right. I cannot access the Fedora menus, they are pushed off to the left out of view.
I previously experienced the same problem with an earlier version of Fedora, with the HD loaded with Ubuntu and Win 7 beta. Fedora would boot but display either the last Ubuntu or last Windows screen to the right, whichever had been running last. No other version of Linux exhibits this behavior that I have found, but my experience is limited. Is there a particular procedure that I need to run to get Fedora to use the entire video display? Does Fedora need to be installed first?
Hardware is: ASUS P5E VM HDMI, using the integrated graphics, display is a 32" LCD TV HDMI input, hard drive is a Samsung 500Gb.
So I just turned my computer on and it was beeping rapidly, and it would stop if I hit "Enter". Also this came on my screen: Cannot set Fray", something like that. It boots fine..just what is that?
I am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
Do not attempt to make any changes to your operating system without fully understanding and accepting that if you screw up, you get to start from scratch. This tutorial involves editing files and folders independent from your Operating system and is relatively safe.
From this point, we'll assume your running Windows 7 and have Virtual PC installed. And before anyone thinks "Hey, what about VMWare or blah blah blah", don't clutter this thread, if they want to do that, they'll Search for Ubuntu on VMWare :wink)
I wanted to run a couple linux apps without rebooting my machine. What follows is an exploration in self mutilation and approaches voluntary masochism. I have discovered that while patience is a virtue, there is nothing virtuous about her. After reading over and over article after article on how you can't use Microcrap's built in Virtual PC for Windows 7, you have to use 3rd party to run a Linux VM. I called ******** and found some lingering threads buried deep within the ubuntu forums. This example is kind of thorough although it lacks the ease of use for people who don't know what they are doing.
A little primer on virtual machines. A virtual machine is a translatable snapshot of an operating system that will play on any machine. It does so by providing a known set of generic hardware with varying levels of complexity based on which OS is running on which machine. In this example, a copy of Ubuntu Linux 10.04 (lucid-32bit) is being run within a window on a Windows 7 Professional 64-bit machine.
Now for the why don't you just set up a dual boot machine and take full advantage of the power of the penguin. Well, it's not that easy, for a multitude of reasons. The biggest is convenience. I have instant access to files updated on either machine within the other, without the wait of a reboot just a quick ALT-TAB. I'm also not stuck to just terminal linux commands through a telnet session to another box. I rarely go beyond the terminal prompt in normal testing, however there are some network tools and testing consoles that I prefer in Linux. And yes, I do have a dual boot option should I want to flaunt my super 64-bit penguin power.
So, on with the story... After spending nearly a day trying this and that and seeing who did what and what wasn't working on my machine, it boiled down to what can Windows Virtual PC do, what hardware does it present to an operating system when it's enhancements are turned completely off (coincidence they would only support RedHat linux? I think not, see approved government operating systems).
When getting setup to start your image, you need a few large downloads, and you need to make your list before you start the process, so you can walk away and watch some tube or mow the lawn. Files needed to get you started: (these will not change typically)Microsoft Virtual PC There will most likely be 3 downloads for this. The upside is you get a "free copy" of windows XP professional out of it. The next file you will need is an ISO of the version of Linux you would like I chose Ubuntu 10.04 32bit, but this will work on most debian kernels I do not recommend 64 bit linux anything at this point unless you dual boot only, it's problematic. Do not burn the ISO to a DVD or CD (I'll explain why later)
Okay, we have all we need downloaded to a common location that we remember right? Great, let's get started installing Microsoft Virtual PC. If your install is similar to mine, you'll install in this order:
Of course change to -i386 if your running 32 bit Windows 7.Now that we have this installed, reboot the computer, after you log back in, check for windows updates by start button and type 'wuauclt /detectnow' without the quotes. Install any updates and reboot yet again.Now we've prepped the computer for adding Virtual PC's. If you want to see what a virtual machine will be like, you can go ahead and run the Windows XP Mode and see how nifty it is to have a clean system to try software on (that's isolated from your real system of course.)
Now on to creating some penguin powered windows. Open Windows Virtual PC. You will see a file explorer type of window with the option to Organize, Include in library, Share with, Burn, Create virtual machine, New folder.
Select 'Create virtual machine'
This will open up a wizard that we will use to setup the environment for Linux. Because this is not a Microsoft innovation, we want it to be as stable as possible.Type in the name you'd like to use, something to identify the OS you intend to install, I used AnotherOS but I would choose something more memorable, especially if you plan on creating multipe VM's The Location should be set for you, although you may put it on another Hard Drive if you would like (perhaps you don't want to allocate space on your SSD and prefer it on your SATA drive) Now for RAM, this is the amount of ram that will be reported to the new operating system, in this example I chose 512, I would recommend at least 1024 if you plan on doing anything graphically intense. For the most part, this will be a chunk of real memory that Windows 7 will not be able to use while the virtual machine is active. You don't want to set it to 3096 if you only have 4096 available and then try to run Autocad on Windows 7 and open your pocket Linux to do some geological survey conversions.
Networking, just leave this checked, we'll address this later. On with the show We want to create a virtual hard disk using advanced options. NEXT Choosing Fixed size because we want this to be as stable as possible. As far as name and location, it's typically simpler to keep it the same. It will have a different extension so NEXT. Now we specify a size. For reference, a typical Linux install, including swap drive portion is around 5gb (assuming you end up installing nearly every package available). I chose 16384 because that was the number that popped up and it was big enough to download nearly anything I could ever want to. Now we are ready to hit Create. You should see this screen and assuming everything happens like it's supposed to, you may close the window.
Whenever I'm dealing with large numbers of computers that need to have identical windows installations put on them, I love using Symantec/Norton Ghost to image the NTFS partition (just making the .gho file the size of the disk I've used, instead of the 160/320GB full volume size), and then uploading it automatically to a windows share.I'd love to be able replicate this exact process with Ubuntu. I have one computer that's ready to go, and a few dozen more that I'd like to quickly get that same image on.
I've heard that there's a command called dd that can make disk images, but I'd really like some sort of boot disk that can allow me to make an image, save it, then run the boot disk on another computer to allow me to reconnect to the server and dump that image on that computer. Ghost 4 Linux doesn't have a network/server component, I think.even if such solutions cost money, I'd love to know if they exist or not.
I am dual booting windows 7 and Ubuntu, and since the upgrade from 9.10 to 10.04 Windows 7 won't load.I tried the solution posted in another thread with a similar problem but to no avail.[URL]
After having some problems with the latest Ubuntu release, I decided to give openSUSE another chance. This time I managed to get flawlessly working everything I needed, and I'm very satisfied with this distro so far.
That said, I encountered a weird glitch in Compiz, specifically with its 3D Windows plugin. It's not really a big deal, but it bugs me, so I might as well give it a shot and ask about it here. With the 3D Windows activated, this is what I get:
what causes this and how can I fix it? I'm using the latest NVIDIA propietary drivers. If you need me to post any additional info, I'll be happy to comply.
I recently installed Lucid Lynx inside my Windows XP using Wubi. When I restart I don't have a boot screen giving me the option to boot into either or, it just boots directly into XP. How do I fix this so I can boot into Lucid?
i currently have lucid installed on my laptop hard drive. i took this drive out and then on a new drive in its place i have installed windows 7. reason why i couldn't put windows 7 on the same drive is that i have a BIOS based system and the hard drive is GPT based not MBR. therefore, i couldn't get windows back on it.
I figured that using an esata expresscard interface i should be able to use the Windows 7 drive externally without much speed penalty since ExpressCard in my case is implemented on PCI Express and not USB.
So i can update grub using Code: update-grub
and Windows 7 appears on the list. However, when i select this option during boot, it gives me errors that indicates that the external drive cannot be found (not surprising)
My guess is that when GRUB appears, the external hard drive has not been detected yet, and the modules for the expresscard may only be loaded during the boot process of lucid.
So I am wondering if there is anyway I can get this to work. meaning use lucid on my main drive and boot to Windows 7 from the external drive time to time.
Rsnapshot also cannot see my external hard drive. But I can see/edit all the files in the windows partition and the external drive. The output of mount for those two entries is:
I know there must be a way to fix this, but cannot find anywhere how to do it.Problem is when I start up machine, it stops at bootloader asking for language "English" and then "Try Ubuntu without any change to your computer" from screen as if I were running a Live CD or DVD installation.to skip this step so my USB boots normally like a harddrive?
The installation was fine, after all the updates were done, I've installed Mesa-dri-experimental and then Gnome-shell.After I activated Gnome-Shell windows have some weird aspect (see image below )I've a acer 8930g laptop with a geforce 9600m gt.Do you have any Idea of what's wrong?I've also noticed that this problem disappear as soon I apply a theme with non rounded windows ( like Crux )
My Ubuntu10.04 installation worked great until recently. But now, this stuff happens:
--On the GNU GRUB ver 1.98-1ubuntu7 list, about half the time I can't move the highlight--no response to keyboard arrow keys, and no response to Enter key--have to wait 60-seconds for highlighted item to start.
--login box's appearance is different, like a different visual scheme/theme
--after login, the screen remains black for a long time before the desktop appears
--when desktop appears, the desktop program icons are gone
--when I launch an app, like the terminal window, it takes a long time for it to open, and after opening, it takes a long time for the prompt tyler9@tyler9-desktop to appear
--Nautilus file browser won't open. When I launch it, I get a button on panel on bottom of screen [like Windows Taskbar] that says "Starting File Browser" but the button disappears, and Nautilus doesn't open. If I enter "nautilus" in terminal window, I get "Bus error."
--Firefox is very slow; typically a delay when I click a tab, and very often, it "darkens"--takes on a darker color and won't respond to clicks. This "darkening" thing happens in other pgms and docs too
--often a long delay when I click anything--panel menu, in a doc, etc
Any ideas for troubleshooting, what the cause(s) might be? My subjective sense is that there's some process(es) running that is causing all this junk. Is there a way to "roll back" to when everything worked OK? Is there an error log or something that might specify why this is happening? [Note: It's not a HW issue--machine is dual-boot Ubuntu/Mint9, and Mint9 works fine--none of the above problems.]
Background: I'm a 20+ year Mac user, switched four years ago to Linux.I have NO experience with Windows to speak of. Whenever I've gotten a new box, it's either been home-built or a Mac.Now I have a new Acer Aspire AS7551 laptop, and although I have not yet booted into Windows, it comes with a Windows 7 Home Premium license. I've been running it with Ubuntu 10.04 off a flash drive and everything works perfectly.
What I want to do: I want to wipe the disk, install Lucid, and run Windows in Virtualbox (for the sole purpose of watching some Netflix and learning a little bit about Windows 7). For the purpose of this question, please accept that I DO NOT want to dual boot.The problem: From what I can find, I can't use the "recovery discs" that came with my laptop to create a virtual machine. This is confusing, because it seems like I paid for a legitimate Windows license for use with this laptop.
Questions:
1. Would MS exchange my recovery discs for a regular install disc to go with my license code if I explained this to them?
2. If not, is there a source for Windows ISOs that I can safely use with my license? (I am aware that the legitimacy of that approach is questionable, but I am quite comfortable with the ethics since I paid for Windows 7, own the license, and only want to use it on the same computer.
3.If not,is there any way in heck I can use my recovery disc to create something Virtualbox can work with?
4. If not, how are all of you people getting your Windows virtual machines going??
(I have read that Acer is a major hassle to get a refund from for the "Windows tax" so I might as well be able to use it--this is MS' chance to win over a fan if only they will let me!)
I'm at my wit's end with Windows this morning. I upgraded to Lucid a few days ago. Everything went very smoothly. Then I spent the greater part of Friday and Saturday "upgrading" to Windows 7 from Vista. I chose the "update" option which was only supposed to update to 7 rather than overwrite the entire HD. Now, GRUB doesn't load and I don't see my Linux partition. HOWEVER, it appears as though the partitions are still there! When I look in Winbloze at the HDs, it shows the Windoze HD as the partition size I made it when installing Ubuntu.
Any ideas on how to recover the awesomeness that is Ubuntu from this situation? Or do I need to install it fresh?
After a fresh install of Lucid I found this error on my screen "the panel encountered a problem while loading "OAFIID:GNOME_NetstatusApplet" do you want to delete it?" I kept pressing no and having a completely worthless system. The programs were all opening in the left corner with no controls to move or close them.
I installed from the live CD, and then it tries to setup MythTV. The screen goes black & there's an outline of a window or dialog box or something. I tried this once before & got outlines like this with outlines of text boxes & pull down fields inside. I could get it to go on to other similar screens by guessing when I was at a "Next" button and hitting Enter.
so I installed the vegastrike game. When I try to run the vssetup file I get this error
Code: ~/Downloads/vegastrike-0.5.0$ vssetup Found data in /home/jarod/Downloads/vegastrike-0.5.0 Error opening terminal: xterm. ~/Downloads/vegastrike-0.5.0$ For the life of me, I can't figure out what the hell is wrong with my xterm? I can run xterm fine in another window, and even when I run xterm as the terminal I'm typing vssetup into, it says it can't open the program. what the hell I'm doing wrong? I just switched to linux about a week ago so I'm a uber noob.
I have installed ubuntu 11.04 64bits, but now I want to install some oracle tools that support only linux 32 bits. So it is possible to downgrade from 64bit to 32 bits ? or any suggestion to make 64 compatible with 32 bits ?
Ubuntu is getting glitchy and I need to update it, but there's something holding me back. In the past, whenever I used to update, I would get some sort of GRUB Menu (if that's what it's called) after reboot, and I would have no idea of how to get into Ubuntu. This would eventually lead me to uninstall Ubuntu via Wubi because of frustration and lack of answers on the internet.
But not this time. I want the solution this time so I can be successful in updating. Can anybody PLEASE tell me what happened all of those times, and what I can do to prevent it from happening now?
Okay so my iPod auto mounts correctly to /media/IPOD (out of the box). But the permissions are set to root leaving me with no write permissions for syncing. Obviously it works if I sudo rhythmbox and then sync, but it's too much of a hassle and not very optimal (having to re-add the songs you want to sync etc).
So...How do I make my iPod mount with permissions allowing me to read & write? Previously (in 8.10 Intrepid Ibex) it used to auto mount with correct permissions.
Some info that might be worth brining up: This all started after I got my iPod back from Apple Store for repairs. I noticed they had updated the firmware and formated it to HFS+, I told them I wanted it changed to FAT32 and got it changed rather quickly. Is it possible they f'd something up when formatting? If so, how do I correct it?
I have just upgraded from 10.04 (where everything was working fine) to 10.10...I am able to boot in recovery mode (graphic mode is working ok this way), but not in normal mode: just after the purple Maverick boot screen, I get a black screen where my computer stucks, possibly for ever (although I can't be definitive on this point )Do you guys have any thought on what is going on here?I boot once in recovery mode, updated my graphic driver (ati, which was not working well anymre according to catalyst), and then I thought everything would be allright, but it is not the case: still black screen at boot.
