OpenSUSE Install :: Bootloader Doesn't Seem To Be Installed Alright?
Dec 27, 2009
Since I had a little time on my hand over christmas break, I decided to do my sister a favor and install linux on her computer (consentually, mind you). But so far, I've caused nothing but trouble, since I can't get Suse to boot. I've reinstalled over and over and over, but everytime I install and reboot, the computer complains that there is no operating system installed.
After a while of reinstalling, I tried to install a boot loader from the live cd instead, but when I open yast to do this, it compains that 'because of the partitions, the bootloader can't be installed properly'.
I've tried pretty much about everything, but nothing seems to work.
View 4 Replies
ADVERTISEMENT
Mar 12, 2011
I'm trying to install opensuse 11.4 but I got this error:
"The bootloader is installed on a partition that does not lie entierly below 128 gb. The system might not boot if BIOS support only lba24(result is error 18 during install grub MBR)"
What should I do before click next step to install? I installed opensuse with this error and some times opensuse can boot and some not. At least I was able to boot safemode.
View 5 Replies
View Related
Feb 16, 2010
I've got a multiboot system with Windozin the first drive and first partition like everyone recommends. I have several distro's and just let them install their bootloaders, but always on hd0 mbr. I installed Debian 5.0.1 this way and it wouldn't boot, so I got SGD to "fix" it, which it said was successful, but all I get is a partition doesn't exist when I try to boot. I put Debian on /dev/sdb3, I loaded Linux Rescueand mounted sdb3 and verified that its menu.lst had the right boot numbers (hd1,2). fdisk even showns /dev/sdb3 as boot as shown by the asterisk under the boot column. Should I do a complete reinstall of grub, maybe using one of the other distro's as the holder of grub? At one time they did all the grub launching as each addition was made
View 9 Replies
View Related
Nov 7, 2010
I have a major problem installing opensuse 11.3 on my computer( hp pavilion dv6).I downloaded openSUSE-11.3-GNOME-LiveCD-x86_64 from software.opensuse.org: Download openSUSE 11.3 and made a live usb.I'm a newbie at using linux infact i never used another operating system beside windows.Now i have installed windows 7 (on c disk 100gb).My first problem when i am trying to install opensuse is that he dosn't automatic choose to make my partitions so i have to do it manualy.I was searching how to make it the best way so i desited to make 4 partitons one for ' /boot' one for ' / 'one for '/home' and a swap partition/In windows7 i made 4 new partitons
3:10 gb for /boot
4:10 gb for/
5:70 gb for /user
6:10 gb for /swap
My first question is :Is this right to make 4 paritions in windows (opensuse can't format or resize my partitions it just can edit it ) so it's my only way to make partitions( If this is wrong how can i make partitions then)
My second question is how to change the bootloader configurtation because everytime when ii try to install opensuse it stops at about 96% and it says to reconfigure the bootloader options.
If i skip this i get the folowing message
=== System Checking ===
Checking for /usr/bin/chroot binary... Passed
Checking for chroot directory /mnt... Passed
Checking for chroot directory content (bin
boot
Checking for binary /mnt/bin/ls... Passed
Trying to chroot... Failed
This is worth reporting a bug at url.
View 9 Replies
View Related
Jun 10, 2010
I successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 1 Replies
View Related
Jan 1, 2010
A couple of months ago I decided to use the wubi installer to install ubuntu on my comp in a dual boot configuration. Yesterday, I clean installed my windows drive with windows 7.I have my windows install on drive C: and my wubi install in Drive D: ( they are on completely different hard disks ), so the ubuntu virtual disks are still intact and the wubildr.mbr is still there.
The bootloader screen at startup doesn't appear at all! I tried to manually boot into the D: hard drive but come up with a error 17 grub loading error, which was because the grub loader doesn't recognize the file system on the drive (ntfs). is there a way to somehow recover the wubi installation?
EDIT: I did some research on the net, apparently if I backup up the root.disk file, erase everything else on the drive, install wubi again and overwrite the root.disk file with the backed up one I should be able to restore my previous ubuntu installation! However, I don't want try something until I'm certain that it would work.
View 3 Replies
View Related
Apr 18, 2011
Playing on a test rig here and I want to install openSUSE in an already multi-boot Ubuntu family environment. All the 'Buntus play together nicely with grub 1.89, learning the ins-and-outs of which appears to be a lifetime endeavor.SUSE appears to be still on legacy grub, and I don't want that to take over from (almost) grub 2.0. It's fairly trivial to add things to the newer grub. Question is can I install SUSE and tell it NOT to install a bootloader at all?
View 5 Replies
View Related
Feb 25, 2011
Currently I am running a dual boot with Windows 7 and openSUSE 11.3. Windows has two partitions, one for the system partition and another for the OS. I have 3 Linux partitions (swap, root, and home). Obviously I am running GRUB to boot, but this seems to be impacting my ability to install Windows 7 SP1. I would like to revert back to the Windows boot loader, install the Service Pack, and then revert back to GRUB. How do I do this?
View 9 Replies
View Related
May 1, 2011
I need to reinstall the 11.4 bootloader (but to the root partition instead of the MBR). There used to be an automated repair GUI on the 11.1 DVD, but it seems to be gone from the 11.4 distro. Is it someplace special I can find it? Can I use my 11.1 DVD to just (easily) reinstall the bootloader? I am *not* a command-line person!!
View 4 Replies
View Related
Dec 20, 2009
I have a computer with windows XP on it. I want to put openSUSE on it with windows xp, but want to use my windows boot loader. How to make an entry. I should mention that I am going to put openSUSE on a second Hard drive.
View 6 Replies
View Related
Mar 14, 2010
I have called, I hope correctly, the first screen you see after the BIOS details - "the bootloader screen". If that is not the correct term, then I mean the screen against which GRUB displays your various OS boot options. For some reason, the bootloader screen only occupies the middle half of my widescreen monitor. The bootsplash screens and the login screen which come after it display correctly. I think they are controlled by the command vga=0x348Is there a way of stretching the bootloader screen so that, like the bootsplash screens and login screen, it extends to the full width of the monitor
View 8 Replies
View Related
Aug 3, 2010
I just upgraded two 11.2 installations. One I easily managed from the dvd the other I had to install anew as the cd didn't offer the possibility of upgrading. While I appreciated the many improvements in desktop stability I found I am non very satisfied of the installer.
It became minimal and just does what IT wants and not what I want anymore. I miss the possibility of choosing desktops, programmes and settings during installation. Most of all I miss the possibility of choosing the bootloader and its location. I have a multi boot multi disk machine and I prefer to modify entries by hand so i never install the loader but add the new entry in the grub but this was not possible and it made just a mess erasing completely all other entries....
Booting has always been a great problem for one of my machines and I'm not going to upgrade it if thisi is the result. Is there a way of going back to the old options (no loader?) Why are the new installer always "easier" but less flexible for a user who's not geek but not even a newbie? Why does it have always to be more "Windows like"
View 5 Replies
View Related
May 23, 2011
I'm trying to install a password on the Grub bootloader on my 11.2 box. I ran yast2 bootloader then clicked on bootloader options, then the checkbox for using a password, and then typed in my password twice. It isn't working. I've tried various different passwords to see if something was throwing it off like special characters or too many characters but no matter what I do I can't use the password to unlock the bootloader on bootup. It just tells me that I entered the incorrect password.
View 8 Replies
View Related
Aug 6, 2011
Because I had Windows installed first, the bootloader was located in that drives master boot record and the openSUSE drive was slaved to it. Now that Windows is gone and the Linux drive is bigger and faster (although the same Ide (pata) ata rating. There are no sata devices in my system.) I want to reverse the master slave relationship between those two drives and put the bootloader on the openSUSE drive.
At the moment a single instance of openSUSE 11.4 is the only operating system installed on the computer I'm talking about.
What procedure should follow to accomplish that?
View 9 Replies
View Related
Aug 14, 2010
I have made the mistake of installing windows XP on one of my drive after I've upgraded to opensuse 11.3 on my other drive. Now, my computer is always booting to XP and doesn't load Grub anymore... I guess I should have seen it coming I previously had similar problems with my boot loader which I could resolve using the Repair boot loader utility distributed with the installation DVD. Apparently, this utility is not distributed anymore with opensuse 11.3... so I'm a little lost. I'd like a bit of advise before I start messing with Yast / boot loader and potentially break everything.
My system is setup as follows: sda is partitioned into sda1 (swap), sda2 (root / in ext4), sd3 (/home in ext3) and sd4 (/windows/F in NTFS containing virtual machines) sdb is partitioned into sdb1 (my Windows XP install in NTFS) and sdb2 (another storage drive in NTFS).
View 7 Replies
View Related
Jan 30, 2010
I am new to this forum as i have installed suse 11.2 now. I am using ubuntu from a long time so decided to try other distro along with karmic. I had lost ubuntu grub after suse installation. Suse bootloader doesnt detect ubuntu partiton. I had tried to edit grub list but failed.
I have added following ubuntu details to suse bootloader:
Below is my HDD partiton details:
How should i boot ubuntu from suse bootloader
View 5 Replies
View Related
Mar 9, 2010
I had windows 7 on my computer on drive D,then I installed opensuse 11.2 on space of drive C. But when I restarted my computer,I couldn't see windows 7 bootloader on the list, all of the options related to opensuse.
View 5 Replies
View Related
Jun 16, 2010
I am trying to install suse 11 on an ibm x3400 m2 machine. After installing the various packages, i get the following error :
Error while installing initrd
Error while installing grub
There are 2 500GB hard disks on which i have configured RAID-1.let me know what the issue could be as I am new to linux.
View 4 Replies
View Related
Jul 28, 2010
I want to install opensuse 11.3, and I get a newer computer to install it(X64), but every time I install, I have been stop at "saving bootloader config" (96%). I have waited for a long time, but no use.
View 9 Replies
View Related
Aug 25, 2010
Ages ago I installed Linux on a "spare" 40GB disk and I don't remember how, but that disk is where I still boot the computer from, in Bios it's listed as a primary master and HD0.
Over the time my installs moved to the "main" disk where it is now Suse 11.3 alongside Windows.
I want to get rid of that original "spare" disk altogether, physically take it out, but don't know how to move the bootloader to the "main" one.
I'm confused by all the options offered in Yast Boot Loader Location menu.
Can I just tell it to put itself into a custom boot partition and point it to dev/sdb, the current designation of the "main" disk?
Would I need to edit Grub as well? I figure the current "sdb" would be called "sda" after I take the old disk out. Would it be safe to simply rename /sdb entries, things like /sdb4 to /sda4 and so on?
Additional question - I used to play with Win7 demo, deleted that now, but its loader still pops up when I boot into Windows with their "earlier version of operating system" menu. Their offered solution is to run "mbrfix" from a WinXp recovery CD.
My question - what would that mbrfix do to the Linux bootloader and how can I get it to point back to to Grub afterwards?
View 9 Replies
View Related
Nov 23, 2010
I've tried to install opensuse in a dual boot with xp. I've got an extended partition with root home and swap and primary partitions for xp and boot. The installation freezes at 92% while installing the bootloader, I've tried installing from cd and from usb, with or without boot partition and nothing changed.
View 3 Replies
View Related
Apr 13, 2011
I installed Gnome 3 on a free partition of my netbook but I lost the boot to my suse kde...(MBR). I launched a live CD on USB but cannot restore Grub; the only way is to reinstall the KDE. Then it boots but does not show Gnome 3. Why the installer does not take into account both OS?
View 8 Replies
View Related
Aug 14, 2011
I use full encryption on this net-book, with the help of LUKS. One key part of the setup is to configure /etc/sysconfig/bootloader with the initial boot options (along the lines of
Code:
root=/dev/mapper/root luks_root=/dev/sda5 luks_home=/dev/sda5 luks_swap=/dev/sda2 luks="root home swap"
). That way a kernel update is installed properly, usually...
[code]....
View 3 Replies
View Related
Nov 26, 2009
After one of the updates (the same day as the kernel was updated) my Startup Theme has been changed from standard SUSE light-green to a dark SUSE EDUCATION.
I'm not talking about GDM logon (this is OK) and not about Bootloader screen (also OK).
I meant a progress of the SUSE loading.
I have Open SUSE 11.1 with GNOME and some software from EDUCATION repo but not a Education release.
View 3 Replies
View Related
Jul 19, 2010
OpenSUSE 11.3 x86_64 Live USB disk only one HDD with OpenSUSE as the only OS.the HDD is fine so i know it is not a hardware problem.this is different from my other (grub) problem as this is a different PC.the installer has been stuck for over an hour at 92%/Saving Bootloader configuration.maybe i can try the installer in text mode to get more info? is there a text mode for the installer?
View 9 Replies
View Related
Apr 16, 2011
I have three drives on my system and I want to put 11.4 on the third drive. My BIOS can select which drive I am going to boot from. I don't want my Windows 7 or Windows XP drives included in grub or grub to over write/install the bootloader on any other drive except the one I am installing 11.4 on how do I do that?
View 2 Replies
View Related
Jun 4, 2011
I tried to install Ubuntu 11.04 via .iso + USB key to my Asus EeePC 1000HE. This computer comes with two partitions already on the hard drive so I installed to the empty one, to dual-boot with Windows XP on the other. Installation seemed to work, but after resetting, the computer always boots straight to Windows, not Ubuntu or an OS list.From my Ubuntu boot USB, sudo fdisk -l shows that the installation wrote to the partition successfully.From Windows, the partition appears to have disappeared.So it seems that the installation worked except that I have no way to boot to Ubuntu.
View 3 Replies
View Related
Dec 15, 2010
I am installing Ubuntu 10.04 server on a box with no optical drive, using a USB pen drive created using Ubuntu's Startup Disk Creator. Installation works just fine. However, instead of installing the MBR/grub2 on the hard drive it is installing it on the usb pen drive - i.e., I can't boot without the pen drive being the bootable device. I tried 'grub-install -root-directory=/boot /dev/sdb', but that didn't work.
I then tried 'apt-get purge grub-common' and then 'apt-get install grub-common'. There is a known bug where it tells you that there is no bootloader installed and do you want to continue without one Y/N - N just sends you straight back to the same dialog instead of installing. I'm not interested in recovering as it's a brand new install - easier just to redo it correctly from the start. So the question is this: how can I install from a USB pen drive and have the bootloader install properly?
View 3 Replies
View Related
Jan 16, 2011
I want to be able to install openSUSE without it's bootloader, because I already have Ubuntu's bootloader and I don't want to have to re-configure everything.
View 6 Replies
View Related
Mar 30, 2010
I just finished installing lucid lynx netbook to my jump drive (full install) to save room on my hard drive. It's working fine except the bootloader was installed to the jump drive as well, meaning I can't boot my computer without the jump drive. Is there any way to correct it so that the computer boot from the hard drive while keeping my install on the jump drive?
View 2 Replies
View Related
