Ubuntu Installation :: Installing 9.10 On Drives That Used To Be In RAID
Jan 11, 2010
I was recently given two hard drives that were used as a raid (maybe fakeraid) pair in a windows XP system. My plan was to split them up and install one as a second HD in my desktop, and load 9.10 x64 on it, and use the other for mythbuntu 9.10. As has been noted elsewhere, the drives aren't recognized by the 9.10 installer, but removing dmraid gets around this, and installation of both ubuntu and mythbuntu went fine. On both systems after installation however, the systems broke during update, giving an "read-only file system" error and no longer booting.
Running fsck from the live cd gives the error:
fsck: fsck.isw_raid_member: not found
fsck: Error 2 while executing fsck.isw_raid_member for /dev/sdb
and running fsck from 9.04 installed on the other hard drive gives an error like:
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
In both cases I setup the drives with the ext4 filesystem. There's probably more that I'm forgetting... it seems likely to me that this problem is due to some lingering issue with the RAID setup they were in. I doubt its a hardware issue since I get the same problem with the different drives in different boxes.
View 5 Replies
ADVERTISEMENT
Apr 8, 2010
i have cretaed RAID on one of my server RAID health is ok but its shows warning. so what could be the problem. WARNING: 0:0:RAID-1:2 drives:153GB:Optimal Drives:2 (11528 Errors)
View 1 Replies
View Related
Jun 27, 2010
I have recently installed a Asus M4A77TD Pro system board which supports raid.
I have 2 x 320gb sata drives I would like to setup raid-1 on. so far i have configured the bios to raid-1 for drives, but when installing Ubuntu 10.04 from the cd it detects the raid configuration but fails to format.
When I re-set all bios settings to standard sata drives ubuntu installs and works as normal but i have just 2 x drives without any raid options. I had this working in my previous setup but thats because i had the o/s on a sepreate drive from the raid and was able to do this within Ubuntu.
View 3 Replies
View Related
Jan 18, 2010
I'm breaking into the OS drive side with RAID-1 now. I have my server set up with a pair of 80 GB drives, mirrored (RAID-1) and have been testing the fail-over and rebuild process. Works great physically failing out either drive. Great! My next quest is setting up a backup procedure for the OS drives, and I want to know how others are doing this.
Here's what I was thinking, and I'd love some feedback: Fail one of the disks out of the RAID-1, then image it to a file, saved on an external disk, using the dd command (if memory serves, it would be something like "sudo dd if=/dev/sda of=backupfilename.img") Then, re-add the failed disk back into the array. In the event I needed to roll back to one of those snapshots, I would just use the "dd" command to dump the image back on to an appropriate hard disk, boot to it, and rebuild the RAID-1 from that.
Does that sound like a good practice, or is there a better way? A couple notes: I do not have the luxury of a stack of extra disks, so I cannot just do the standard mirror breaks and keep the disks on-hand, and using something like a tape drive is also not an option.
View 4 Replies
View Related
Jul 29, 2010
My two 400G drives which have been added to a single 800G array (per fastbuild bios utility) still show up as two 400G drives in fdisk. Why is that?
View 1 Replies
View Related
Sep 27, 2010
how to migrate my whole server to larger hard drives (i.e. I'd like to replace my four 1TB's with four 2TB's, for a new total of 4TB instead of 2TB)... I'll post the output from everything (relevant) that I can think of in code tags below.
I'd like to end up with much larger /home and /public partitions. When I first set up raid and then LVM it seemed like it wouldn't be too hard once this day arrived, but I've had little luck finding help online for upgrades and resizing versus simply rebuilding from a failure. Specifically, I figure I have to mirror the data over to the new drives one at a time, but I can't figure out how to build the raid partitions on the new disks in order to have more space (yet mirror with the old drive that has a smaller partition)... don't the raid partitions have to be the same size to mirror?
Ubuntu Server (karmic) 2.6.31-22-server #65-Ubuntu SMP; fully updated
Code:
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md5 : active raid1 sdd5[1] sdc5[0]
968952320 blocks [2/2] [UU]
[Code].....
View 3 Replies
View Related
Jan 29, 2010
So windows wouldn't recognize my drives as a raid setup, so I disabled it and switched to IDE, now Ubuntu 9.10 installation will only recognize my drives as RAID. I have and ASUS M3A32-MVP Deluxe Series motherboard, it has 4 sata connectors and 2 marvel controlled sata connectors. In the 4 sata connectors I have my 2 wd 500gb hds, my dvd burner, and my external usb, esata slots. In the marvel controlled sata connector I have a wd 160gb hd. Originally when I built the computer I wanted a raid setup with the 2 500 gb hds.
But windows wouldn't recognize the raid set-up and wouldn't boot properly. So I said screw it and removed the raid and set all the drives to IDE. Then, when I tried to install Ubuntu 9.04 it would only recognize my 2 500 gb hds as raid. Gparted recognizes the drives as both raid and IDE. Eventually, after a day or two of praying and messing around the installer recognized both drives as raid and IDE. A couple months later here I am trying to install Ultimate Edition 1.4.
View 14 Replies
View Related
Jun 9, 2011
so I setup a raid ten system and I was wondering what that difference between the active and spare drives is ? if I have 4 active drives then 2 the two stripes are then mirrored right?
root@wolfden:~# cat /proc/mdstat
Personalities : [raid0] [raid10]
md1 : active raid10 sda2[0] sdd2[3] sdc2[2] sdb2[1]
[code]....
View 2 Replies
View Related
Nov 3, 2010
I just installed Debian 5.0.4 successfully. I want to use the PC as a File Server with two Drives configured as a RAID 1 device. Everything with the RAID device works fine, the only question I have belogs to the GRUB 0.97 Booloader. I would like to be able to boot my Server even if one of the disks fail or the filesystem containing the OS becomes corrupt, so I configured only the data partitions to be a RAID 1 device, so on the second disk should be a copy of the last stable installation, similar to this guide:[URL]...
[Code]...
View 3 Replies
View Related
Dec 31, 2010
My System Intel Core Duo E5300 Mobo - Gigabyte G31M-ES2L 1GB DDR2 800MHz RAM 4 x WD20EARS HDD I have been trying to install Fedora or Ubuntu for over a week. I thought it would take an hour and i would be away. I have been trying to install using the mdadm Software RAID feature. Everytime it takes about a day to format the drives and then i get an installation error. The drives state they are ready to use as is on any operating system other then WinXP, but this does not appear to be the case.
I am very new to Fedora... I have been doing some reading.[URL].. That information has been promising. I have been able to get into Fdisk off the live CD but i can't figure out how or if it is possible to do what i want it to.
Has anyone had any luck getting these drives to function correctly in a software RAID? I have had good luck with WD drives in the past and just assumed these drives would do what i wanted to but alas i have been proven wrong.
The partitions i wanted was...
- A 2GB swap parition
- A 10 GB RAID 1 partition for Fedora
- The remaining space as a Raid 5 for files.
Am i just banging my head against a wall here, or is this possible.
View 1 Replies
View Related
Apr 15, 2009
I have been battering with FC10 and software RAID for a while now, and hopefully I will have a full working system soon. Basically, I tried using the F10 live CD to setup Software RAID 1 between 1 hard drives for redundancy (I know its not hardware raid but budget is tight) with the following table;
[Code]....
I set these up by using the RAID button on the partition section of the install except swap, which I set-up using the New partition button, created 1 swap partition on each hard drive that didn't take part in RAID. Almost every time I tried to do this install, it halted due to an error with one of the raid partitions and exited the installer. I actually managed it once, in about...ooo 10-15 times of trying but I broke it. After getting very frustrated I decided to build it using just 3 partitions
[Code]....
I left the rest un-touched. This worked fine after completing the install and setting up grub, reboot in to the install. I then installed gparted and cut the drive up further to finish my table on both hard drives. I then used mdadm --create...etc to create my RAID partitions. So I now have
[Code]....
View 2 Replies
View Related
Jun 4, 2011
Fedora is having trouble identifying a raid partition, it sees them as separate drives. I got drivers from dell, but during a Fedora dvd install, it mentions nothing about a place to install extra drivers.
When it says it must "initialize" the drives, Fedora then breaks the dell bios raid. How to either install the dell drivers or make Fedora see the raid partition as one?
View 1 Replies
View Related
Apr 4, 2010
I'm about to install Ubuntu on two 250-gigabyte hard drives in a RAID 1 array, but I'm confused about how to partition my hard drives. How much space should I give to each partition? How many partitions should I create and where should I mount them? (I should mention that Ubuntu will be the only OS on this array.)
View 3 Replies
View Related
Nov 29, 2010
I am having trouble installing Ubuntu 10.04 on a HP Z600 with a two disc raid system. Is there a way to solve this without using the alternate cd (where the data files seem to be corrupted). The regular 10.04 cant find any drives on which to install, the 10.04 alternate cd�s all have corrupted files. I have tried downloading the .iso from two mirrors as well as from .torrent, all have data problems. The HASH checksums are fine, only the data on the burned discs are wrong. I have also tried using a USB install, but there are problems there aswell. At the moment I have win 7 on the disc as on the other partition, and have been using Ubuntu 10.10 (that is now an unbootable broken system), but have to downgrade to 10.04 becasue of software requirements.
The RAID seems to be an INTEL Raid . From HP homepage: Integrated 6 channel SATA 3 Gb/s controller with RAID (0, 1, 5 or 10) capability, optional SAS controller, LSI 3041E 4-port SAS/SATA, with RAID (0, 1 or 10) capability
View 1 Replies
View Related
Dec 27, 2010
I have been trying to install Ubuntu on my new computer as a duel boot with Windows 7. My computer has four 1TB hard drives, One with Windows 7 installed, two that are used for storing media (both are independent, not in a RAID or anything like that) and one empty hard drive. This hard drive contains a 901.51 GB NTFS partition, and 30.00 GB of Unallocated space, I wish to install Ubuntu in this unallocated space; giving it 20 GB (the 10 GB left over might be used for installing XBMC Live). But when I boot Ubuntu's Live CD the installer doesn't show me the unallocated space, and doesn't really show me any of the extra Hard drives.
View 3 Replies
View Related
Mar 1, 2011
Installing Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
View 1 Replies
View Related
Jun 1, 2010
My smallest disc has the Vista loader and nothing else but I cannot select it for Dual Booting in the Ubuntu installation set up only for use as an entire disc which would delete the Vista Loader.
This is what I have:-
1st disc - no operating system much data
2nd Disc - empty except for Windows loader
3rd Disc - no operating system much stuff.
My original plan was to give Ubuntu all of the smaller second disc and I deleted everything ready to give it the entire hard disc. It was only when I went to install Ubuntu it I found the Vista loader lurking on disc 2 and the only option the install Ubuntu set up gave me for disc 2 was to use the entire disc (wiping out Vista loader) otherwise I could have installed Ubunbtu on another disc - which it reported as having no operating system.
If I put Ubuntu on disc 1 would I have a dual boot arrangement given that the installer saw no operating system on that disc ? Is there any (simple) way I can install Ubuntu on disc 2 and not loose the Vista loader? I am installing this version of Ubuntu as it was on the DVD that came with book "Beginning Ubntu Linux" It took me long time to Psych myself up to install it and when I did . . .
View 9 Replies
View Related
Oct 26, 2010
I'm trying to install GRUB2 on root partition under RAID 5. I tried using the alternate CD, but installation failed. Now I'm trying under the live CD and grub-install ... but I'm being told it can't find the device even though /dev/sda2 (root partition) and /dev/sda are mounted.I have 4 discs, each with a swap partition (/dev/sdX1) and a root partition (/dev/sdX2).
View 9 Replies
View Related
Jun 29, 2011
I have a raid 0 setup with 2 x 1TB drives. I have an ASUS P8P67 LE motherboard and am using Interl RST for the Raid setup. I'm utterly ignorant of raid and therefore forgive any mistakes... I already had windows 7 installed and was attempting to dual boot ubuntu.
I installed Ubuntu from CD. The raid was picked up properly as only one drive by ubuntu. So it picked up the windows MBR and the main windows partition. I resized the main partition and used the "install ubuntu and windows 7 side by side" option. Installation went fine but once I restarted the PC I was welcomed by a grub rescue screen with the message: "error: no such device e196.....". Edit: I used the Windows 7 disc to repair the windows bootloader so I can now boot into Windows 7.
Before doing so I used gparted on the live cd to check the partitions on the drives. The only ones present were the MBR and windows one. So ubuntu seemingly didn't install... Although GRUB did... I was advised by someone on the ubuntu IRC chat to avoid trying to reinstall ubuntu at that point just in case there was an error in the partitioning process. I've since checked the state of the partitions from within windows and there's the MBR partiton, the windows partiton AND the partition that I created for ubuntu... 965MB of the partition that I created is listed as used space as well...
View 6 Replies
View Related
May 9, 2010
First of all here's my PC configuration
Proc Core2Duo 6750
MB MSI P35 Neo 2
RAM Corsair 4GB
Video Gigabyte GTS250
HDD 2x320GB Seagate in RAID 0 and 1GB WD
I have a Windows 7 installation with a boot partition on the RAID. I also want to have a dual boot with openSUSE 11.2 but I don't know how to set correctly my partitions. I have some unallocated space next to the Windows C: partition. When I try to install openSUSE it makes a suggestion to create some partitions that i don't need and don't want, and even doesn't mount them. It also creates a / 80GB, /boot 36MB, swap 2GB and /home 20GB partitions, so I am in lack of free space.
I don't know how to create screenshots during installation. Maybe I'll try to reinstall later and pick some screens in english, because my system language is bulgarian.
View 3 Replies
View Related
Jun 3, 2010
Months ago one of my computers died. I have bought a brand new one laptop, but I have a problem at the moment I wanted to install Ubuntu in dual boot with Windows 7: the new partition that windows 7 reserves for securing system files.
There are three partitions: Windows 7 principal, Windows 7 for securing system files (at the drive's beginning) and the recovery partition that HP puts there. Then I only have option to resize the Windows principal partition and get another principal partition. My question is if you know how to deal with this?
The other option you can help me is to advise me about some external hard drives to install ubuntu in them and don't touch the internal disk of my laptop.
View 6 Replies
View Related
Apr 19, 2009
Am installing Fedora 10 on an old but good server that used to be a windows box. It has 2 sata disk raid level 1 on adaptec 2410SA card. Disks are clean no info even did a low level format and recreated RAID.. twice DVD boots and installs os on raid array and reports success. new volume appears under computer icon but cannot be mounted after reboot attempt reports Reading physical volumes. This may take a while... (it doesn't)
Volume group "VolGroup00" not found
Unable to acces resume device (/dev/VolGroup00/LogVol01)
mount: error mounting /dev/root on /ysroot as ext3: No such file or directory
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
and then a blinking cursor with keyboard echo but its just copying reboot with install DVD does not show previous (unmountable) disk image and repeat of above process increases operator need for alcohol have "disable write cache for drives" as I found that is a post but after fedora install.I do not know what grub is for instance but once linux is booted (on other computers) I can muddle through ok in terminal mode.
View 1 Replies
View Related
Jan 26, 2010
I have two drive on my Ubuntu server. I have a 40GB IDE 5400RPM and an 80GB SATA 7200RPM.
Is it at all possible to RAID 0 the two of these drive? I know it's pretty unorthodox, but it's what I've got without having to buy anything.
If so, what are the limits, cons, and/or potential pros of doing a RAID of these two?
View 9 Replies
View Related
Mar 17, 2010
I want to make a RAID5 array with 4 2TB hard drives. One of the drives is full of data so I will need to start with a 3 disks and then once I copy the data from the 4th onto the array, I will then add the 4th drive. This will be my first experience with RAID. I've spent a few hours searching for info but most of what I have found is a bit over my head.
View 9 Replies
View Related
Oct 30, 2010
I'm using 4 hard drives (1 of which is a sata drive) and i need help installing raid drivers i cant get these hard drives to mount at all
View 3 Replies
View Related
Dec 14, 2010
I've got a 10.10 installation, which I am using as a media/download server. Currently everything is stored on a 1TB USB drive.With the costs of disks falling, and the hassle of trying to back 1TB up to DVD (no, it's not going to happen) I was wondering if there's some linux/Ubuntu utility, which can use multiple disks to provide failover/resilience ... Could I just buy another 1TB drive, and have it "shadowing" the main, so that if one goes, I buy another, and then restore from the copy ?
View 3 Replies
View Related
Feb 3, 2011
I have a motherboard with the following chipset Intel 945GM + Intel ICH7R Chipset
This board: http://emea.kontron.com/products/boa...6lcdmmitx.html
I have two 320GB HDDs setup in hardware raid as shown below. But in gparted they are showing as two seperate drives. Why is this?
Raid setup:
GParted
fdisk -l
What am i doing wrong here?
View 8 Replies
View Related
Jun 14, 2011
I have a RAID 6 built on 6x 250GB HDDs w/EXT4. I will be upgrading the RAID to 4 2TB HDDs.
How would one go about this? What commands would need to be ran? I'm thinking about replacing the drives 1 at a time and letting it do the rebuild, but I know that would take a lot of time (which is fine). I don't have enough SATA ports to setup the new RAID and copy things over.
View 3 Replies
View Related
Apr 24, 2010
I shall start off by saying that I have just jumped from Windows 7 to Ubuntu and am not regretting the decision one bit. I am however stuck with a problem. I have spent a few hours google'ing this and have read some interesting articles (probably way beyond what the problem actually is) but still don't think I have found the answer.I have installed:
Distributor ID: Ubuntu
Description: Ubuntu lucid (development branch)
Release: 10.04
Codename: lucid
I am running the install on an old Dell 8400. My PC has an Intel RAID Controller built into the MB. I have 1 HDD (without RAID) (which is houses my OS install) and then I have 2 1TB drives (These are just NTFS formatted drives with binary files on them nothing more.) in a RAID 1 (Mirroring) Array. The Intel RAID Controller on Boot recognizes the Array as it always has (irrespective of which OS is installed) however, unlike Windows 7 (where I was able to install the Intel RAID controller driver) .Does anyone know of a resolution (which doesn't involve formatting and / or use of some other software RAID solution) - to get this working which my searches have not taken me too?
View 2 Replies
View Related
Mar 9, 2011
I'm looking for advise on which drives to add into my server for software raid 5. I would like to use 2TB drives for the array. The server currently boots off a RAID 1 array and I have a couple other drives mounted until I build a RAID 5 array with new drives. I've read horror stories on using Western Digital WD20EARS and Seagate ST32000542AS. So I'm wondering which large drives are best to use in software raid?
View 9 Replies
View Related
