Installation :: Installing OpenSUSE 11.2 On RAID 0 - Create Screenshots During Installation
May 9, 2010
First of all here's my PC configuration
Proc Core2Duo 6750
MB MSI P35 Neo 2
RAM Corsair 4GB
Video Gigabyte GTS250
HDD 2x320GB Seagate in RAID 0 and 1GB WD
I have a Windows 7 installation with a boot partition on the RAID. I also want to have a dual boot with openSUSE 11.2 but I don't know how to set correctly my partitions. I have some unallocated space next to the Windows C: partition. When I try to install openSUSE it makes a suggestion to create some partitions that i don't need and don't want, and even doesn't mount them. It also creates a / 80GB, /boot 36MB, swap 2GB and /home 20GB partitions, so I am in lack of free space.
I don't know how to create screenshots during installation. Maybe I'll try to reinstall later and pick some screens in english, because my system language is bulgarian.
View 3 Replies
ADVERTISEMENT
Jan 11, 2010
I was recently given two hard drives that were used as a raid (maybe fakeraid) pair in a windows XP system. My plan was to split them up and install one as a second HD in my desktop, and load 9.10 x64 on it, and use the other for mythbuntu 9.10. As has been noted elsewhere, the drives aren't recognized by the 9.10 installer, but removing dmraid gets around this, and installation of both ubuntu and mythbuntu went fine. On both systems after installation however, the systems broke during update, giving an "read-only file system" error and no longer booting.
Running fsck from the live cd gives the error:
fsck: fsck.isw_raid_member: not found
fsck: Error 2 while executing fsck.isw_raid_member for /dev/sdb
and running fsck from 9.04 installed on the other hard drive gives an error like:
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
In both cases I setup the drives with the ext4 filesystem. There's probably more that I'm forgetting... it seems likely to me that this problem is due to some lingering issue with the RAID setup they were in. I doubt its a hardware issue since I get the same problem with the different drives in different boxes.
View 5 Replies
View Related
Nov 29, 2010
I am having trouble installing Ubuntu 10.04 on a HP Z600 with a two disc raid system. Is there a way to solve this without using the alternate cd (where the data files seem to be corrupted). The regular 10.04 cant find any drives on which to install, the 10.04 alternate cd�s all have corrupted files. I have tried downloading the .iso from two mirrors as well as from .torrent, all have data problems. The HASH checksums are fine, only the data on the burned discs are wrong. I have also tried using a USB install, but there are problems there aswell. At the moment I have win 7 on the disc as on the other partition, and have been using Ubuntu 10.10 (that is now an unbootable broken system), but have to downgrade to 10.04 becasue of software requirements.
The RAID seems to be an INTEL Raid . From HP homepage: Integrated 6 channel SATA 3 Gb/s controller with RAID (0, 1, 5 or 10) capability, optional SAS controller, LSI 3041E 4-port SAS/SATA, with RAID (0, 1 or 10) capability
View 1 Replies
View Related
Jun 18, 2010
I want to create a file-server with Ubuntu and have two additional hard drives in a RAID 1 setup. Current Hardware: I purchased a RAID controller from [URL]... (Rosewill RC-201). I took an old machine with a 750GB hard drive (installed Ubuntu on this drive). I installed the Rosewill RAID card via PCI port. Connected two 1TB hard drives to the Rosewill raid card. Went into the RAID bios and configured it to RAID 1.
My Problem: When I boot into Ubuntu and go to the hard drive utility (I think that's what its called). I see the RAID controller present with two hard drives configured separately. I format and tried varies partition combination and at the end of the day I see two separate hard drives. Just for giggles, I also tried RAID 0 to see if they would combine the drives.
View 3 Replies
View Related
Oct 26, 2010
I'm trying to install GRUB2 on root partition under RAID 5. I tried using the alternate CD, but installation failed. Now I'm trying under the live CD and grub-install ... but I'm being told it can't find the device even though /dev/sda2 (root partition) and /dev/sda are mounted.I have 4 discs, each with a swap partition (/dev/sdX1) and a root partition (/dev/sdX2).
View 9 Replies
View Related
Jun 29, 2011
I have a raid 0 setup with 2 x 1TB drives. I have an ASUS P8P67 LE motherboard and am using Interl RST for the Raid setup. I'm utterly ignorant of raid and therefore forgive any mistakes... I already had windows 7 installed and was attempting to dual boot ubuntu.
I installed Ubuntu from CD. The raid was picked up properly as only one drive by ubuntu. So it picked up the windows MBR and the main windows partition. I resized the main partition and used the "install ubuntu and windows 7 side by side" option. Installation went fine but once I restarted the PC I was welcomed by a grub rescue screen with the message: "error: no such device e196.....". Edit: I used the Windows 7 disc to repair the windows bootloader so I can now boot into Windows 7.
Before doing so I used gparted on the live cd to check the partitions on the drives. The only ones present were the MBR and windows one. So ubuntu seemingly didn't install... Although GRUB did... I was advised by someone on the ubuntu IRC chat to avoid trying to reinstall ubuntu at that point just in case there was an error in the partitioning process. I've since checked the state of the partitions from within windows and there's the MBR partiton, the windows partiton AND the partition that I created for ubuntu... 965MB of the partition that I created is listed as used space as well...
View 6 Replies
View Related
Mar 20, 2011
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
View 4 Replies
View Related
Apr 19, 2009
Am installing Fedora 10 on an old but good server that used to be a windows box. It has 2 sata disk raid level 1 on adaptec 2410SA card. Disks are clean no info even did a low level format and recreated RAID.. twice DVD boots and installs os on raid array and reports success. new volume appears under computer icon but cannot be mounted after reboot attempt reports Reading physical volumes. This may take a while... (it doesn't)
Volume group "VolGroup00" not found
Unable to acces resume device (/dev/VolGroup00/LogVol01)
mount: error mounting /dev/root on /ysroot as ext3: No such file or directory
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
and then a blinking cursor with keyboard echo but its just copying reboot with install DVD does not show previous (unmountable) disk image and repeat of above process increases operator need for alcohol have "disable write cache for drives" as I found that is a post but after fedora install.I do not know what grub is for instance but once linux is booted (on other computers) I can muddle through ok in terminal mode.
View 1 Replies
View Related
Jul 23, 2011
I know in Fedora one can take screenshots during actual installation of the OS with Shift+Printscreen keys on the keyboard and then can access them as root in the folder /root/anaconda-screenshots. So how do I do the same while installing Ubuntu?
View 2 Replies
View Related
Apr 30, 2011
I want to create a script with the command
sleep 3; xwd -root | xwdtopnm | pnmtopng > capture.png
for creating screenshots. But I'm having problems with creating its structure. I'd like it to:
1- Check if there's a capture.png file on /home
2- If there is, check if there is a capture1.png file (and so on, until it reaches a captureNUMBER.png file that does not exist)
If there is not, proceed
3- Take the snapshot after three seconds (so that I can go to the window I want)
4- Create a captureNUMBER.png file at /home
Here's my attempt (I don't know how to automatically change the name of the file, so my first idea was to create keep this structure until capture10.png)
#!/bin/bash
cd /home
if[ -f capture.png ]
[code]....
View 6 Replies
View Related
Feb 1, 2011
Could any RAID gurus kindly assist me on the following RAID-5 issue?I have an mdadm-created RAID5 array consisting of 4 discs. One of the discs was dropping out, so I decided to replace it. Somehow, this went terribly wrong and I succeeded in marking two of the drives as faulty, and the re-adding them as spare.
Now the array is (logically) no longer able to start:
mdadm: Not enough devices to start the array.Degraded and can't create RAID ,auto stop RAID [md1]
I was able to examine the disks though:
Code:
root@127.0.0.1:/etc# mdadm --examine /dev/sdb2
/dev/sdb2:
Magic : a92b4efc
Version : 00.90.00
code....
Code:
mdadm --create --assume-clean --level=5 --raid-devices=4 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2
As I don't want to ruin the maybe small chance I have left to rescue my data, I would like to hear the input of this wise community.
View 4 Replies
View Related
Apr 9, 2010
I have run Ubuntu in the past and then switched to OpenSUSE several months ago and set up raid 0 on a 500gb hard drive and 700gb hard drive (I went with openSUSE because of the graphical raid setup.)
My whole partition setup looks like this:
500gb Hard Drive:
750gb Hard Drive:
md0 is the two 400gb partitions on each drive for a total of 800gb space on my /home partition ext4 filesystem ( 380gb space used ) md1 is 100gb ext4 / partition.
all raid 0
Now I was wondering if I downloaded the alternate install cd for ubuntu ( as OpenSUSE has crashed for the second time because of bad updates ( starts, but gets to terminal only ) ) would I be able to keep my raid 0 home partition and wipe the rest of the each drive and setting up Ubuntu keeping all of my files and settings intact, just to install my programs I need all while keeping my old settings ( such as firefox bookmarks, virtual box utilities etc. ) intact.
From what I know it's possible, but I don't know much about the Ubuntu Alternate install disk ( as I have been dealing with dependancy hell on OpenSUSE ) but in OpenSUSE it wont let me keep the old raid setup ( md0 ) Im guessing it is possible to set up the home directory on a different hard drive and then going back into the live cd, editing the fstab, and switching it to md0, if this is even possible, or would I need to configure the driver on that system before I did that Oh and I forgot to mention that I've only been running 64bit operating systems.
System Specs: AMD Dual core at 2.8ghz ( overclocked, stable, cpu ran at full bore for a day. only reaching 120f) Nvidia 9600 gso 368mb ram, 4gb ram at 800mhz
View 1 Replies
View Related
Jun 25, 2010
I've got 3 extra disks on OpenSuse 11.2 - all the same size. I've created a partition on all of them as type 0xFD. If I then try and add raid in yast I get "There are not enough suitable unused devices to create a RAID."
View 9 Replies
View Related
Feb 27, 2010
I'll have a Sony VAIO AR290 with 2 HDD, earlier I'll have a Windows XP and SUSE and RAID was turned off. Now I turn on RAID in STRIPE mode for better productivity, Windows 7 installation was successful, It creates MBR partition (100 M and C: HDD. During SUSE installation(I've chose all parameters- swap and partition) installation process stop at 1% on "operating with HDD" and my VAIO dont answer on any key pressed (alt ctr del, ctr c, esc) and I'll should to turn it power off. During surfing web, I'll find some solutions to solve it by creating root partition but It hasn't any results.
View 7 Replies
View Related
Nov 26, 2010
I have installed Ubuntu on my m1530 since 8.04 and currently dual boot Win7 and 10.10. I would like to dual boot on my PC, but I have run into a problem. I am not a pro at Ubuntu, but this problem I can not solve by reading forums like I have in the past.
I realize this is a common problem, but I have noticed people having success.
I have a M4A87TD EVO MB with two Seagate drives in Raid 0. (The raid controller is a SB850 on that MB) I use the raid utility to create the raid drive that Windows7x64 uses. I have 2 partitions and 1 unused space. Partition 1 is Windows, partition 2 is for media, and the remaining unused space is for Ubuntu.
I am running ubuntu-10.10-desktop-amd64 off a Cruzer 16GB flash drive that was installed via Universal-USB-Installer-1.8.1.4.
My problem like so many others is that when I load into Ubuntu, gparted detects two separate hard drives instead of the raid. I read that this is because kpartx is not installed on 10.10. I then went in LiveCD mode and downloaded kpartx from Synaptic Manager. Gparted still reported two drives. I opened terminal and run a few commands with kpartx. I received an error. (Forgive me I didn't write it down, but I believe it said something about a communication error. I will try again later and see.)
Currently I am reflashing the Cruzer with a persistence of 4GB. I am not familiar with this process, but I understand that my LiveCD boot will save information I download to it. I decided to try this method because I was going to install kpartx and reboot to see if this made a difference.
I am looking for any suggestions on a different method or perhaps someone to tell me that the raid controller or some hardware isn't supported. I did install ubuntu-10.10-alternate-amd64 on my flash drive, but fail to get past detecting my CD-ROM drive since it's not plugged in. If this method is viable, I will plug it in. I also watched the ..... video were a guy creates Raid 0 with the alternated CD, but it wasn't a dual boot and didn't use a raid controller from a MB.
View 6 Replies
View Related
Jul 27, 2011
I'm trying to get my Adaptec RAID 6405 working on fresh Opensuse 11.4.I need to make a driver/module for this because aacraid module doesn't see the raid controller.
modinfo aacraid
filename: /lib/modules/2.6.37.6-0.5-default/kernel/drivers/scsi/aacraid/aacraid.ko
version: 1.1-5[26400]-ms
[code]....
How to make a driver/module for a fresh opensuse 11.4 installation ?
View 4 Replies
View Related
Jul 18, 2009
how can I create RAID 1+0 using two drives (one is with data and second one is new). Is it possible to synchronize data drive with empty drive and create RAID 1+0 ?
View 3 Replies
View Related
Apr 6, 2010
I'm having some (well, a lot actually) of problems trying to get OpenSUSE 11.2 installed on my home PC. I am attempting to set up a dual boot configuration with Windows 7 installed on an bios Nvidia RAID 0.I was able to shrink the partition in Windows, and rebooted onto the net install for OpenSUSE (the MD5 validated DVD install failed multiple burns with "Repository not found"). I get into the graphical installer portion with no problems off the net install CD. However, the installer is not recognizing that there is an existing RAID 0. It lists the 2 SATA disks in the RAID separately. I can click on SDA1, and both SDB and SDB1 and it shows the disks, but does not recognize any existing partitions. If I click on SDA I get an immediate segfault in YaST and drop back to the text mode installer menu. It is loading the nv_sata module just fine.
From forum searches and google it seems that this is not usually a problem. My motherboard is a Gigabyte GA-M57SLI-S4 with the Nvidia Nforce 570 chipset running an AMD X2 64 3800+. Removing the stripeset and redoing it as Linux software RAID is not an option, I do not have enough space for a total backup/restore. Anything I do has to be nondestructive to the existing Windows installation.I really want to have a linux installation but between the DVD installer failing and now this issue I am about ready to give up on it.
View 9 Replies
View Related
Jul 20, 2009
I am running openSUSE 11.1. I installed the Hypervisor and tools and booted into: 2.6.27.23-0.1-xen. I'm trying to install Ubuntu LTS 8.04.3 as a guest using the "Create a Virtual Machine" GUI/wizard. I specify "other" since no Debian-based distro is offered under "Type of Operating System". Under "Installation Source" for "Operating System Installation" I Add a Virtual Disk of "phy:/dev/sr0" using protocol "phy". It can obviously read the drive since it recognizes that it is 0.6 GB (the media contains a burned & bootable (from ISO) DVD - the files are extracted).
However, when I proceed I am thrown an Error:
"The installation source is unusable." with Details:
"0.6 GB CD-ROM or DVD (phy:/dev/sr0)"
Am I supposed to do something different?
View 6 Replies
View Related
May 3, 2010
I'm creating a presentation of OpenSUSE and want to take som screenshots of the whole screen and app-windowsI'm using OS11.2 KDE 4.3.5. Is there a tool for this?
View 6 Replies
View Related
Aug 11, 2011
i'm trying to create a database with the mysql that came with the suse installation, my problem is that i can't get mysqladmin to work it spits out this: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysql/mysql.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysql/mysql.sock' exists! So I'm stuck at square one php info() seems ok with the installation and the installed client connects to my remote DB ok. I checked the server with ps -ef | grep mysqld and I get the following:
2438 2436 0 15:47 ? 00:00:00 /usr/sbin/mysqld --defaults-file=/home/ben/.local/share/akonadi//mysql.conf --datadir=/home/ben/.local/share/akonadi/db_data/ --socket=/home/ben/.local/share/akonadi/socket-linux-ygk7.site/mysql.socket root 6248 6151 0 16:01 pts/0 00:00:00 grep mysqld
Which doesn't really mean a lot to me but looks ok, anyway my question boils down to does anyone have any obvious ideas of what I'm doing wrong or is, as others have hinted, suse's mysql installation is broken?
View 5 Replies
View Related
May 4, 2010
How Do I Create Bootable USB Installation For NetBook ?
I am going mad!
I am trying to make a bootable USB installation
so I can try OpenSUSE 11.2 on my NetBook with no CD/DVD drive.
I've Google'd for hours and tried different things
but I can not make a bootable USB of OpenSUSE 11.2.
I am running Ubuntu 10.04 now on my main desktop
and Ubuntu 10.04 now on the NetBook,
but have access to a Windows XP computer too...
View 2 Replies
View Related
Sep 13, 2010
I've just finished booting my system via Live CD, and installing 10.04-1 to existing partitions on a hardware RAID. The install went fine but when I rebooted I didn't get past the BIOS output screens.I used four existing partitions for the install: /home (MyRAID3, which was kept as-is), / (MyRAID2, which was reformatted) , /boot (MyRAID1, also reformatted) and swap.
View 9 Replies
View Related
Sep 15, 2010
It's been a real battle, but I am getting close.I won't go into all the details of the fight that I have had, but I've almost made it to the finish line. Here is the set up. ASUS Z8PE-D18 mother board 2 CPU, 8 Gig Ram. I recently added an OCZ Agility SSD, defined a raid 1 virtual disk on the 1 terabyte WD HDD drives, which will holds all of my user data, the SSD is for executables.The bios is set to AHCI. Windows 7 installed fine, recognizes the raid VD just fine.
I installed Ubuntu 10.04 by first booting into try and mode, then opening a terminal and issuing a "sudo dmraid -ay" command. Then performing the install. I told it to install the raid components, and told it to let me specify the partitions manually. When setting up the partitions, I told it to use the free space I set aside on the SSD from the Windows 7 install as ext4 and to mount root there. Ubuntu installed just fine, grub2 comes up just fine, and Windows 7 boots with out a hitch, recognizing the mirrored partition as I indicated previously. When I tell grub to boot linux however, it pauses and I get the "no block devices found" message. It will then boot, but it does not recognize the raid array. After Ubuntu starts up I can run "dmraid -ay" and it recognizes the raid array, but shows the two component disks of the raid array as well. It will not allow the component disks to be mounted, but they show up which is annoying. (I can live with that if I have to)
I have fixed a similar problem before by setting up a dmraid script in /etc/initramfs-tools/scripts/local-top ... following the instructions found at the bottom of this blog:[URL].. To recap: My problem is that after grub2 fires up Ubuntu 10.04.1 LTS (Lucid Lynx), it pauses, and I get "no block devices found" It then boots but does not recognize the raid array untill I manually run "dmraid -ay". I've hunted around for what to do but I have not found anything. It may be some timing issue or something, but I am so tired of beating my head against this wall.
View 4 Replies
View Related
Apr 5, 2011
Is this possible? I was able to do this with Debian 6 no problem. The installation interface is really nice but seems to be lacking any way to do more advanced configurations. Is there some boot option I can pass in?
View 2 Replies
View Related
Mar 15, 2010
Can I create common /home partition for multiple Linux distributions like Fedora, Ubuntu, openSUSE?
View 3 Replies
View Related
Dec 14, 2009
When in YaST/System/Partitioner I try to create RAID for my second HDD which is named "sdb".
My original "sda" hdd is partitioned as follows:
dev/sda, disk type
dev/sda1, linux swap, swap, swap
dev/sda2, linux native, ext3, /
dev/sda3, linux native, ext3, /home
When trying to partition second "sdb" hdd I go to "/dev/sdb" under "Hard Disks", then create partition on "/dev/sdb" ... new partition/maximum size, press next button, do not format partition/0xFD linux raid/do not mount partition. After that "swap" partition of the whole size of disk gets created. However when trying "raid" in system/partitioner/add raid I end up with ("ERROR" there are not enough suitable unused devices to create raid).
View 4 Replies
View Related
Mar 12, 2011
I've tried installing Graphite One under my new clean Suse 11.4 64-bit installation. graphite one apparently needs python 2.6 to install and suse 11.4 comes with 2.7. I hope I can just create symbolic links to satisfy the installer to run? I've tried to make 2.6 links under /usr/bin and /usr/lib64. I'm using
Code:
sudo ln -s libpython2.7.so.1.0 libpython2.6.so.1.0
to create the links, but I've sort of lost track of all the python library�s (.so .so.1 .so.1.0 and so on). Furthermore I have no idea about how to verify if it is correct.
Code:
ls -l /usr/bin/python*
[Code]...
View 9 Replies
View Related
Jul 1, 2010
I'm installing openSUSE 11.2 on a notebook from DVD + locally mirrored update and kde4 buildservice repositories. This usually worked fine, but this time, the installation always fails at about 89% while installing some package, whose name I can't find out. Its script fails with error 127, the error message blocks access to the log.
Is there a way to continue the installation process afterwards, instead of always trying to reinstall and hoping to find out the name of the failing package?
View 3 Replies
View Related
Aug 4, 2011
Is it possible to install a video driver at the time of the installation of the operating system? I have made multiple installation attempts using the various 11.4 x64 live & non-live versions. As soon as I get past the splash screen with the boot options, the display becomes corrupt & continuing is impossible. I have attempted using the various video options under the F6 menu (text mode, vesa, safe mode) without success.
I am reasonably certain it is a failure of the video driver. I have observed the identical behaviour while installing MS Windows with the incorrect video driver. The video chipset manufacturer does provide a linux driver on their website. It is a .run file. I have the .run file on a USB stick along with the OS files. This is a link to the hardware platform I am attempting to install to. Is it possible that my video chipset has insufficient video memory?
View 9 Replies
View Related
