Ubuntu Installation :: Installing 10.10 With Multiple Hard Drives?
Dec 27, 2010
I have been trying to install Ubuntu on my new computer as a duel boot with Windows 7. My computer has four 1TB hard drives, One with Windows 7 installed, two that are used for storing media (both are independent, not in a RAID or anything like that) and one empty hard drive. This hard drive contains a 901.51 GB NTFS partition, and 30.00 GB of Unallocated space, I wish to install Ubuntu in this unallocated space; giving it 20 GB (the 10 GB left over might be used for installing XBMC Live). But when I boot Ubuntu's Live CD the installer doesn't show me the unallocated space, and doesn't really show me any of the extra Hard drives.
View 3 Replies
ADVERTISEMENT
Mar 18, 2009
i am new in Linux. i have two drives one IDE and other SATA in my computer.i want to keep windows XP , WIndows 2003 server on one drive and two flavours of linux on the other drive, let say oopen suse and redhat.please help me how i install these sofwares to make multi boot the machine.
View 2 Replies
View Related
Jul 28, 2010
I have been trying to move away from Windows2000 on Ubuntu for months. I have a few applications that I run on Windows that I have been unable to find usuable equivalents on Ubuntu eg Outlook/Mobile sync application required for my job and a DVB TV card application for home. So it looks like I am stuck ruuning W2K and Linux for at least a while and indeed I have been using GRUB2 to select between W2K and Ubuntu.
I need some basic advice about setting up GRUB2. My philosphy when it comes to PC data is you can never have enough backups and I avoid any single point of failure. So I have always used two hard drives which I keep in sync almost daily with FreeFileSync. I also swap my most critical encrypted data between a laptop and desktop. Then I also alternate external USB drives stored away from my home.
My current partions are
When I installed on the Ubuntu 500GB I let it & GRUB2 take the default options so it boots from Hd1 and I assume certain executables are stored at the begining of the Ubuntu partition as well as configuration files in its file system.
Now I'm replacing the 500GB with a 1.5TB and the old 500Gb will become my backup drive. I want to keep the backup drive bootable in its onw right. If either hard drive fails I want a bootable system and acccess to my data.
So my plan is to use the following partitions.
I can install W2K on the 1.5Tb from scratch or use Acronis to restore an image file. Then I can install Ubuntu from scratch.
OK now for my questions.
1) Can I get GRUB2 to put its executables and configuration files on a small partition of its own? I see no reason why they should be dependant on a specific Ubuntu partition. I have read posts mentioning this but not sure if this has to be a bootable Linux or just a file system with the config files.
2) Can I run update-grub on any Linux and store or copy the config files to the partition in 1?
3) I will use BIOS to determine which hard drive is first to boot. When I run update-grub (or when it runs during the new Ubuntu install on Hd1) I dont want GRUB2 to do anything with Hd2, not even know Hd2 exists, it that an option?
View 4 Replies
View Related
Jan 23, 2011
I have 3 hard drives installed to my system, 1TB, 2TB and 500GB drives with the following configuration:
ledi@ledi-ubuntu:~$ sudo parted /dev/sda print
Model: ATA SAMSUNG HD103UJ (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[Code]...
I can boot to the Ubuntu installation in the 2TB drive. My problem reversed when I reinstalled grub to one of the Ubuntu installations in the 1TB drive. I can boot to any of the OS's in the 1TB drive, but not to the Ubuntu in the 2TB drive. The error message is the same as above. I have no idea what am I doing wrong and I would be really grateful for any assistance.
View 6 Replies
View Related
Jun 1, 2010
My smallest disc has the Vista loader and nothing else but I cannot select it for Dual Booting in the Ubuntu installation set up only for use as an entire disc which would delete the Vista Loader.
This is what I have:-
1st disc - no operating system much data
2nd Disc - empty except for Windows loader
3rd Disc - no operating system much stuff.
My original plan was to give Ubuntu all of the smaller second disc and I deleted everything ready to give it the entire hard disc. It was only when I went to install Ubuntu it I found the Vista loader lurking on disc 2 and the only option the install Ubuntu set up gave me for disc 2 was to use the entire disc (wiping out Vista loader) otherwise I could have installed Ubunbtu on another disc - which it reported as having no operating system.
If I put Ubuntu on disc 1 would I have a dual boot arrangement given that the installer saw no operating system on that disc ? Is there any (simple) way I can install Ubuntu on disc 2 and not loose the Vista loader? I am installing this version of Ubuntu as it was on the DVD that came with book "Beginning Ubntu Linux" It took me long time to Psych myself up to install it and when I did . . .
View 9 Replies
View Related
Jun 3, 2010
Months ago one of my computers died. I have bought a brand new one laptop, but I have a problem at the moment I wanted to install Ubuntu in dual boot with Windows 7: the new partition that windows 7 reserves for securing system files.
There are three partitions: Windows 7 principal, Windows 7 for securing system files (at the drive's beginning) and the recovery partition that HP puts there. Then I only have option to resize the Windows principal partition and get another principal partition. My question is if you know how to deal with this?
The other option you can help me is to advise me about some external hard drives to install ubuntu in them and don't touch the internal disk of my laptop.
View 6 Replies
View Related
Apr 29, 2011
My computer has 2 40GB hard drives (yes, it's really old). One of these hard drives has Ubuntu installed on it, and I would like to use the second hard drive as a data storage device that is usable by anyone who just wants a random place to drop random stuff. How do I do this?
View 2 Replies
View Related
Oct 9, 2010
I have a second hard drive that I plan on placing in a computer I wish to use this computer as a server so my question is how could I use these 2 hard drives as one lets say one is 80Gb and the other is 40GB how could they be shown as 120GB instead of being seperate The installation of server planned on being used is 10.04.
View 7 Replies
View Related
Mar 25, 2011
I am running Ubuntu on a box with a couple of hard drives, and on a network where we have another Ubuntu machine and a couple of windows boxes. I use filezilla to upload files to other web servers but filezilla will only access files on my main hard drive, not on the second drive and not on the rest of the network.
View 1 Replies
View Related
Apr 19, 2011
I am just trying F-Spot because a novice ubuntu friend needed help. ubuntu 10.04.2. As a test, on my PC, I have pasted some photos into a particular test folder in my current Ubuntu (in my user folders). I have also nominated a folder as a destination for imported photos. After starting F-Spot, I try to use the test (source) folder in F-Spot with the intention of importing the test photos.
I am using a PC with three hard drives. One has various distros installed, mostly ubuntu versions, all in their own partitions. The other two hard drives are ones I use for data, including backups. They are both continuously mounted. However, the import 'file finder' facility only lists the two data drives, it does not list the current home user folders, which is where my test (source) folder is(!!!)
View 1 Replies
View Related
Jul 13, 2011
I am thinking of building a new computer. I have been using Ubuntu for a couple years now, but I am not good with the terminal usage. Nevertheless, if I was to go back to Windows I be lost. My Computer would be:
Motherboard = Micro ATX
Hard Drive 1 80GB = Operating System
Hard Drive 2 250GB = Home (my documents)
Hard Drive 3 500GB = Media (videos, music & pictures)
I would like the file to end up on the desired hard drive automatically. And my main menu to display accordingly. In other words, when I click over music, under places in my computer menu, for the computer to know which hard drive to go to. The reason for wanting this setup is, to provide security for the OP, separate my private documents from my music and videos. Now I am using external hard drives. But, it just do not look right, besides the menu is funky.
Would I have to use a RAID set-up or just the partition tool. Does anyone knows of a post or tutorial on how to accomplish this? (plain English would be better).
View 3 Replies
View Related
Sep 1, 2011
I am doing a new build with an SSD / HDD combo, and I am wondering, is there a way I can install Ubuntu spread across both drives? I know I can do this in Fedora, but I haven't seen much of a feature like this in Ubuntu.
View 9 Replies
View Related
Dec 20, 2010
How to mount multiple external HDD's. I'd like to link or mount the music, torrents, and general files from several external hard drives and apply permissions (in some cases I only want the mount or link to be read only).
My setup:
- Seagate Dockstar running Debian squeeze (it's headless so I don't have a gui running)
- Two external HDD's with one partition on each (250GB and 400GB)
What I'd like to accomplish:
1. Mount the external HDD's to /media/HDDs as read/write (this is already working using udev and autofs and it's available in samba)
2. I'd like the MUSIC directories on both external HDD's to show up under the same mount point. In other words I want the MUSIC folders (from both HDD's) to appear as one large library of music. And I only want this to be readonly. It will be used as the library for mpd and/or squeezebox.
3. Mount a directory used to download torrents to. I'll probably pick on HDD as the target for torrent dowloads. But let me know if you have any other ideas regarding this.
Since I have the first one done, how would I accomplish 2 & 3?
View 1 Replies
View Related
Aug 1, 2011
My questions begin with Virtual Box. I have Windows XP installed via Virtual box. Ordinarily, I hate everything about windows, but unfortunately some things related to my job I am still in need of having some access to some form of Windows. I am wanting it to recognize all of my multiple hard drives that are installed on this system, 4 of them to be exact, so that I can utilize files from all of them.
View 3 Replies
View Related
Dec 29, 2010
I'm not a stranger to Ubuntu Linux and I was using it for a couple of months with no problems until last week when I turned my computer on and it would go no further than the boot screen and it said 'Error- Insert System Disk'. So I inserted the system disk (Ubuntu Linux 10.something) and after waiting 10 minutes for it to load up it said 'Installation failed, desktop session will now be run and you can try installing again'. So I tried installing whilst on a desktop session and I eventually got to step 4 of 8 and it lets me go no further. This is what step 4 of 8 is:http://oi54.tinypic.com/mx2g79.jpg
And so I cant choose any disks or partitions and so it wont let me go any further. How do I create one? I'm currently running on desktop sessions and they take forever to load up and I cant watch videos or anything because there is no flash. By the way please try and explain to me really simply because I am quite dopey and I wont be able to understand posh complicated computer words.
View 9 Replies
View Related
Jul 4, 2011
Right so my situation is a little obscure and from all the posts I've read through I can't find one that suits me well enough.My PC's hard drive recently went on the fritz so I backed up all my data, got a brand new Terrabyte hard drive and then put all my stuff on there. I also plugged in the fault drive as a secondary and ahev cleared most of the stuff off it. It's separated into two partitions; E: and F: but together make about 600 gigs. I then have two external Terrabyte hard drives, it's a long story but their connected via USB.
Now I really like the idea fo getting to grips with Linux. I don't want to use a LIVE CD, I've done that already and I want to see how I get along using it as a proper OS. I also really need to keep the Windows Vista for several reasons, most importantly for iTunes which I use to keep my iPhone and iPad up to date and I've heard iTunes and linux don't get along too well, even with programs like WINE. So obviously I'm looking to dual boot and keep all my data but what would be the best way to go about it? Stick it on my primary drive? Or on my slightly faulty drive? Or on one of my two externals? On the bright side, because I'm on a fairly new hard drive, my Vista runs really smoothly, and so I shouldn't encounter too many bugs that windows is renowned for a long the way...
I'd also like to be able to access all my data from both OSs so I don't have to keep jumping from one OS to another. Is that possible? or simple to accomplish?I have a pretty good Nvidia graphics card too, so I'd appreciate it if someone could explain how I get XGl working on Fedora once it's all set up.
View 8 Replies
View Related
Nov 13, 2009
I recently installed Fedora 11 x86_64 (dual boot with XP) and am having difficulty finding two of my three hard drives to mount them. This is my setup: 80 GB Hard drive (boot drive) with two partitions, one for XP (NTFS) and one for F11 (ext4). 2x250 GB Hard drives, one is formatted with NTFS, the other one has yet to be formatted (my plan is to use ext4).
All of my drives are SATA, on the same nVidia controller. After the install, I can see only the 80 GB hard drive (both partitions). What do I need to do to find the other two drives? During the install, it called the partitions /dev/sda0, sda1, sda2 and sda3, but I no longer see these drives. If I knew where the drives were I could mount them, but my systems just isn't seeing the drives.
This is the output of df:
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg_user-lv_root
[code]....
View 6 Replies
View Related
Jul 30, 2010
When you run a Linux live CD it automatically detects your hardware configuration, or at least tries to. Say you got a live CD and it works perfect on one computer, detects all the hardware. If you install the operating system from the live CD to a hard drive, does it only install the drivers you need for your hardware?
If so, say you were to hypothetically do that on a removable hard drive that you lock and unlock with the hardware keys; would that mean if you want to move the drive from one computer to another regularly, the OS would not be configured properly on a different hardware configuration, and wouldn't be able to configure itself properly because it is now on a hard drive? I know that Linux does try to detect new hardware each time it boots, but I guess the short version of the question is: Does installing a distribution on a live CD to a hard drive mean you will not have all the drivers available on the CD?
This is not something I am sure I will ever plan to do, but it would be no different than if you wanted to swap your drive into a new computer. If it could at least still connect to the Internet it might try to reconfigure itself. If installing the live CD means you get absolutely all the contents on the CD, that would answer my question. Maybe someone might know exactly how that would work.
View 14 Replies
View Related
Apr 15, 2010
I have one machine with two disks that I'd like to install Slackware on. I'd like to have the root folder and installed folders on hdb, and just have have hda as a disk I can use for storage (without any home directories, etc.). My problem is, I don't know how to make this boot, as I think LILO is installed on the primary drive, but the boot folder is located on hdb. I tried doing this before and was having problems booting, so I was just going to go through the whole process again, but don't really know the correct procedures.
View 2 Replies
View Related
May 23, 2010
Having a little problem with 10.04 installation. I have two hard drives installed on my PC. One that had Hardy Heron and one data. When the install program launches from a CD boot, it fails and drops me to a live session to check out the problem. I can see both drives and mount them but if I then launch the installer, it does not give either as an option for installation.
View 4 Replies
View Related
Jul 18, 2010
When i try to install ubuntu 10.04 on my desktop i get through the first 3 steps which are Language, Region, and Keyboard. when i get to Prepare partitions, there is nothing there (same problem with 9.10). I followed the steps of another thread about removing the raid settings and I am sure i did that correctly but it did not work, when i try to find my drives in terminal they can not even be found.
Both of my drives are SATA, one is 250gb, other is 500gb. They are both recognized by other operating systems. I have switched the SATA headers that they are plugged into. I really am just not sure what else to do here. Im not totally stupid at linux, ive been using it for a few years and i have taken two classes for linux in the past year. I really feel dumb for not being able to figure this out :/
View 1 Replies
View Related
May 1, 2011
Alright so i'm trying to install ubuntu 11.04 except it's not recognizing my hard drives. I have two 80gigs plugged in via sata. And neither of them are being recognized by ubuntu. I have tried plugging them in together, and separately, still nothing. I'm getting pretty frustrated. Ubuntu 11.04 just doesn't seem to be working for me. I can run from the liveCD, but i get no unity desktop environment
View 3 Replies
View Related
Sep 1, 2011
I am installing Ubuntu on my server that has 2 2tb disk drives. My plan for this server is to set it up as my web server (using apache), will need a mysql database and would like a ftp site. I could really use some advice on how to partition the hard drives.
View 1 Replies
View Related
Jan 8, 2010
So, at the moment I have a 7TB LVM with 1 group and one logical volume. In all honesty I don't back up this information. It is filled with data that I can "afford" to lose, but... would rather not. How do LVMs fail? If I lose a 1.5TB drive that is part of the LVM does that mean at most I could lose 1.5TB of data? Or can files span more than one drive? if so, would it just be one file what would span two drives? or could there be many files that span multiple drives drives? Essentially. I'm just curious, in a general, in a high level sense about LVM safety. What are the risks that are involved?
Edit: what happens if I boot up the computer with a drive missing from the lvm? Is there a first primary drive?
View 10 Replies
View Related
Jan 21, 2010
I am attempting to install on a HP ML110 box. It has 2 SATA drives installed. From the live cd I can do fdisk -l and see both drives, I can see both from GPated but during the actual install it doesn't see any drives in which to install.
View 1 Replies
View Related
May 1, 2010
this may be a very stupid question, but. My computer has two hard drives. One has Windows XP installed on it. The other is blank.
Is it possible for me to install Ubuntu onto the second hard drive, and run a dual-boot using GRUB during startup? Or does it only work when both OSs are on the same hard drive?
View 1 Replies
View Related
May 4, 2010
I would like to install Ubuntu 10.04 on my new 1 TB hard drive. I currently have Windows XP installed on a 160 GB hard drive for things that I cannot do on Ubuntu. I would like to know if it's possible to install the other hard drive, and then dual boot Windows with it? Effectively dual booting across two hard drives. I wouldn't care if GRUB replaces the standard Windows bootloader, just as long as I can choose between the two at startup
View 9 Replies
View Related
Mar 13, 2011
I installed Ubuntu 10.04 in a Raid 0. The install went fine. When I shut down my machine then boot it back up it shows no raid volumes defined and my hard drives as offline. Then the Disk boot error message. I am new to Unbuntu and I am sure the solution is simple I just need to know what to do.
View 9 Replies
View Related
Jun 3, 2011
Is there any performance degradation or complications that arise from having Linux installed on a separate, physical hard disk from Windows in a dual-boot setup? I have a computer that I'd like to dual-boot Ubuntu and Windows but the current hard drive is quite fragmented and the Windows partitioner won't allow me to make a partition large enough to comfortably run Linux+several gigabytes of media that need to be stored. The rig, however, may have room for another internal drive, so I thought that having a separate physical disk reserved completely to Linux would be an easy solution. The tech guy at the local computer store suggested there might be difficulties with this configuration because one drive needs to be the "master" and the other a "slave", resulting in boot complications.
View 5 Replies
View Related
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
