I need to boot a live disk and reinstall CRDA to the hard disk. I'm pretty sure I need to mount the partition and copy over files. If anyone knows the commands to do this and the location of the CRDA on my live disk.
View 4 Replies
Browsing thru the dmesg output, I saw this:
cfg80211: Calling CRDA for country: MX
cfg80211: Regulatory domain changed to country: MX
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[code]....
Wireless works fine, but I'm not currently in Mexico, so where is this coming from?
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I downloaded Ubuntu and burned it to a CD-There was no problem with that part. It starts to install asks about the partition then the keyboard. Then it just stops and does nothing.
View 3 Replies View RelatedI have a 2 SATA HDD on my machine. The first one (320GB) contains the NTFS partition for my Windows 7. Now I have this second HDD (320GB), I want to install Ubuntu with it so I decided to create two partition with it, 50GB for Ubuntu and the rest for NTFS, so now I have two partition on it. I created an Ubuntu 10.10 bootable on my USB stick, booted it from there. Now on the installation, I set to manually assign partition, the installer detects my 2 HDD, the data was as follows
/dev/sta ATA ST3 - my first HDD contains Windows 7
/dev/sta1 320GB
/dev/stc ATA ST3 - my second HDD contains two partitions
/dev/stc1 50GB
/dev/stc2 230GB
Now I want to install Ubuntu on stc1 which is a 50GB partition, I changed the 50GB partition to ext4 journaling file system then checked the format drive. When I click forward, there was an alert asking me that I don't set any swap space. What is that? How can I set it? Is that really necessary? And also I am wondering on the another option below the boot loader installation which should I choose on there? its default choice was the /dev/sta1 which is my Windows 7 loader.
I made an upgrade from Kubuntu 9.04 to 9.10 and this upgrade generated a series of permission problems.
Considering that I have an individual /home partition, I am planning to make a clean install of Karmic (9.10) on a laptop with a 230GB hard disk and 2GB RAM.
The actual hard disk is mounted the following way:
In total there are some 230GB of Hard Disk available.
The fat 32 partition was not a good idea, because I can't access it from the file manager, so I will dump this partition on my next installation.
Now my question: What partitions would you recommend to mount and what size would you give to each partition?
I'm trying to install the ubuntu netbook remix on an older Eee PC (4 gig SSD drive), and it's not letting me get past the prepare the disk space.I'm booting from a USB key, and I can get it and do various things from the live image. However, when I go through the install, it gets to the "prepare disk space" screen, and then I can't proceed. Screen looks like this:Prepare Disk SpaceThsi computer has no operating system on it.(blue bar)free space 4MG, /dev/sdb11 3.7GBWhere do you want to put Ubuntu-Netbook-Remix 9.10? Install them side by side, choosing between them each startup (this one is selected) Erase and use the entire diskgreyed outlist box is shown, refers to sdaThis will delete Debian GNU/Linx (4.0) and install Ubuntu-Netbook-Remix 9.10o Use the largest continuous free spaceo Specify partitions manually (advanced)bar with slider for free space, /dev/ddb1, and Ubuntu-Netbook-Remix 9.10And then nothing else - no forward button, or anything like that.
View 2 Replies View RelatedI now that when I run my PC and insert Ubuntu Live CD/DVD it installs it on the same partition, but how can i do this from boot, because I can't boot Windows XP, I installed Puppy Linux so my PC is usable but I need to access the data from Windoink Iws Partition, which I can do from Puppy. But I want to install a "real" OS like Ubuntu but still be able to access Windows XP Partition data. I think it is not possible to access the data from Ubuntu on a seperate partition so they have to be on the same one if I am right. Just if you wanna know why I can't boot XP? I get the BLUE SCREEN OF DEATH!
View 2 Replies View RelatedI'm running Karmic Server with GRUB2 on a Dell XPS 420. Everything was running fine until I changed 2 BIOS settings in an attempt to make my Virtual Box guests run faster. I turned on SpeedStep and Virtualization, rebooted, and I was slapped in the face with a grub error 15. I can't, in my wildest dreams, imagine how these two settings could cause a problem for GRUB, but they have. To make matters worse, I've set my server up to use Luks encrypted LVMs on soft-RAID. From what I can gather, it seems my only hope is to reinstall GRUB. So, I've tried to follow the Live CD instructions outlined in the following article (adding the necessary steps to mount my RAID volumes and LVMs). [URL]
If I try mounting the root lvm as 'dev/vg-root' on /mnt and the boot partition as 'dev/md0' on /mnt/boot, when I try to run the command $sudo grub-install --root-directory=/mnt/ /dev/md0, I get an errors: grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea. grub-setup: error: Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume.
Somewhere in my troubleshooting, I also tried mounting the root lvm as 'dev/mapper/vg-root'. This results in the grub-install error: $sudo grub-install --root-directory=/mnt/ /dev/md0 Invalid device 'dev/md0'
Obviously, neither case fixes the problem. I've been searching and troubleshooting for several hours this evening, and I must have my system operational by Monday morning. That means if I don't have a solution by pretty early tomorrow morning...I'm screwed. A full rebuild will by my only option.
I am currently downloading Ubuntu from a torrent at: [URL]. The file will be Ubuntu-9.10-alternate-i386.iso at 689Mb. I have a dial-up connection so the download is taking a long time to complete. I understand this to be a disk image file. I am using Windows XP v5.1 (Build 2600.xpsp_sp3_gdr.090804-1435 : Service Pack 3) as the operating system on my Emachine. This computer supports booting from a USB drive in the BIOS. I also have a DVD/CD +R+W drive to burn a disk image to if needed.
In short I want to install Ubuntu on a bootable partition of a NTFS external USB hard drive.
The external hard drive is a Western Digital 320Gb USB 2.0 that came formatted as NTFS.
I plan to use "EASEUS Partition Master 4.1.1 Home Edition" to create a ~40Gb NTFS partition on this drive for the Ubuntu install and any future Linux applications that I will acquire. The larger partition will be used for Windows backup storage and as a portable drive with a number of portable windows applications.
1) Should I use another file system other than NTFS? FAT? FAT32? Something Linux?
2) What steps are required to install Ubuntu on the partition?
In addition I would like to try to run Ubuntu inside a "shell" inside Windows XP from time to time. I have software (VMware player v3.0.0-197124) that I think can accomplish this. I have the following security and utility programs running:
WinPatrol (real-time)
SpyWare Terminator (scheduled scans)
WinMem Optimizer (real-time)
ThreatFire (real-time)
PC Tools FireWall Plus (real-time)
Avast Antivirus (real-time)
3) Are any of these programs known to interfere with the installation of Ubuntu or with Ubuntu running in a shell?
What program is good to install to partition my PC after installation (I installed without a partition). Also, any quick tips in partitioning? Lastly, I have an old Ubuntu installed together w/XP on another PC. I want to install Xubuntu to replace the old Ubuntu, using the same partition. Is that possible?
View 2 Replies View RelatedI was wondering if it's somehow possible to install the Live USB to an ext4 partition, this because I have a 4gb filesize limit on fat32 and that means I cannot make the casper-rw any larger. And next to that I can decently manage permissions on that.
View 9 Replies View RelatedI have messed up my partitions really bad and grub refuses to install. Here's how it looks:
Code:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 2432 19430617+ 83 Linux
/dev/sda3 2433 60801 468848992+ 5 Extended
/dev/sda5 2433 2930 4000153+ 82 Linux swap / Solaris
/dev/sda6 2931 53535 406484631 83 Linux
/dev/sda7 53536 60801 58364113+ 7 HPFS/NTFS
Initially there was only Linux (Karmic) on this hdd, on what is now sda2 to sda6, current sda2 being the boot partition. Now, I decided to install Windows XP and using GParted I created an NTFS partition at the end, sda7. But it wanted to have his loader on the first one, so (now this is probably stupid what I did) I cut 100MB from Linux root and put it as NTFS at the beginning, making it sda1, boot and letting windows install it's loader there. I figured I can just reinstall grub on it later (think I have missed some tutorials). As you can probably guess, it won't. I formatted sda1 to ext4 now. What I do is run the Live CD (9.10), use terminal, then do
Code:
sudo -i
mkdir /media/boot
mount /dev/sda1 /media/boot
grub-install --recheck --root-directory=/media/boot /dev/sda1
and it goes
Code:
grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea.
grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and its use is discouraged.
grub-setup: error: Cannot read `/grub/core.img' correctly
also, when I do update-grub it says "grub-probe: error: cannot find a device for /."
I tried installing grub on sda2 and flagging it as a boot and still no-go.
I guess it's time to move up to Ubuntu 9.10 from 9.04 ...unless you would advise me to stay with 9.04. Either way, I would like to do a clean install. I managed to create a separate partition for /home almost a year ago ... now the only thing I want to keep inside /home is one big folder which I already had made a backup copy with several DVDs (larger than 4GB). Besides that large folder, I would like to start everything new. This would be my second time installing and it has been quite awhile. Here are my questions:
1. I know I have backup DVDs in hand. But sometimes DVDs are funky. I would restore my files with DVDs as last resort. So, should I just delete all files and folders (including hidden ones) under /home except a large folder that I would like to keep? If so, can I do that while on a normal gnome session or am I better off doing it while on Live CD?
2. I see a suggestion that when installing Ubuntu, I need to make sure to mount /home but NOT FORMAT IT. Is there a visual tutorial or step-by-step guide showing how to do this?
3. Are there other gotchas like I need to "create" user name the exact same spelling as old user name that is already created under /home on my harddrive?
I am in the process of installing BT4. At the partitioning stage of the install, I noticed that it could not detect my windows 7 like in the example screenshot they provided with the guide: click here: However, This is how the partition stage looks like on my system:
Why can't I see Windows here? I remember from the partition editor in windows, that my primary C: disk had 3 partitions. A system reserve, some small unallocated space and 157 gb which belongs to windows. My question is, why does it fail to detect the windows. I'm guessing the ubuntu installer only sees the 6gb of unallocated space as the only possible option to install on. So Ubuntu can only be installed on unallocated space ? I'll have to narrow down the partition that C: is on, make the unallocated partition bigger and put Ubuntu on it.
Did I answer my question there? I am being paranoid because in no case can I loose files. Here's a screenshot of my gParted
had 9.04 install on a dual proc home built system that was running fine until a recent update wiped out grub. Since I have all my data backed up, I decided just to install 10.04. I select Use Entire Disk but when Ubuntu tries to install, I get this error:The ext4 file system creation in partition #1 of Serial ATA nvidia_dacaecb (mirror) failed.
View 7 Replies View RelatedI purchased a new HD and my goal is to have a Windows partition, an Ubuntu partition, (a swap partition of course), and large fat32 partition for storing data to be used on both the Windows and the Ubuntu side.
I am installing from USB and do not yet have a copy of Windows to install. I keep getting an error saying that the attempt to mount vfat failed.
I just installed win 7 and now can't install fedira 13 on the partition that i made for it on the same drive. The problem is that after installation of win 7 i lost the ability to boot form cd. In bios i still have cd set up to boot first and drive second, but win 7 did something that overrides bios set up. I even tried Esc for boot menu, then i select to boot form cd, but it still boots in windows.
View 1 Replies View RelatedI have only used Windows. Yeaterday, i decided to try Ubuntu 10,04, since I've heard so much great about it. My problem is, when I am supposed to choose which partition to inastall on, the list is blank! it shows nothing at all... the frames and all are there, but no drives to choose from.
I'm installing from DVD with .ISO file.
My Hardware:
AMD Athlon xp 2400+ 2,00 Ghz
1,25GB RAM
Current OS: Win XP
Rather than booting into a CD, or rebooting into a partition, or rebooting at all or clobbering my MBR or installing GRUB, I would like to install Ubuntu into an existing partition from an already running Ubuntu installation. Because of my requirements, LUBI or UNetBootin would not work because it (1) overwrites the bootloader (e.g., GRUB or NT bootloader) and (2) requires a reboot for the installation.
Is this possible? It seems like the Debian installer could just be run from the command line, but I don't know how you'd point to the right stuff (e.g., an ISO image).
I would like to know if I can use spare partition to install new versions of Ubuntu ("use" as the CD drive, or USB stick; not as the destination of the installation).I have Ubuntu on my computer, and unused partitions on the hard disk. I would like to upgrade to ubuntu, but without needing to burn another cd or an (sufficiently) empty usb stick to do it.
I imagine that this is possible, as the partitions may be booted from, and the contents of the iso image are understandable by the installed Ubuntu. But I don't know how to do it - put the iso contents on a partition and boot from it to install a new Ubuntu.
I used gparted to create 60GB free space which I then formatted as ntfs. However,when I go to install XP I get the blue screen of death.I know the XP installation disc is OK.The ntfs partition (sda3) is after the ext4 partition (sda1) - could this be the source of the problem?
View 9 Replies View RelatedI recently put ubuntu on my laptop in hope that most of my games would run through wine, some did and some didn't.
Anyway, long story short, I have ubuntu on my laptop and I want to re install windows onto a separate partition, keeping my ubuntu instillation in tact and set as my deafault OS.
I'm very new to ubuntu and the only guides i've seen are fairly complex. I was just wondering if anyone could point me in the right direction? p.s. Is there maybe a way to create an image of my current ubuntu nstillation/settings/apps etc. just in case I do something wrong and lose everything?
I just started using ubuntu on my laptop... At the moment is the only operative system available on my machine.Unfortunately I need to install Windows 7 too because I need it for my job.can somebody please help me creating a partition and installing windows?will I be able to access the files stored on my pc from both the operative systems?I recently replace the hard drive and at the beginning I created a bit of mess because I first installed windows 7, than ubuntu on a partition (splitting the hard-drive about 50%) and then, as I was having problems with windows I decided to just keep ubunto, so I reinstalled it on the hole hard drive (I guess)
View 5 Replies View RelatedI am going to install unix FreeBSD But someone told me you must installed it on primary partition. However I have Win 7 installed on laptop, others partition are logic so is it possible to create or change one unused partition as primary.
View 1 Replies View RelatedI changed partitions (partition X is now partition X+1) and can no longer boot. I get thrown into grub rescue. But even if I get past that, it still doesn't boot. (I can't see why because it's using an unsupported graphics mode by default, but that's another gripe). I would prefer an installation which is not fragile to changes in partition numbers or drive numbers. It's not 1975 any more, can't we use meaningful names instead of 0, 1, 2?
View 2 Replies View RelatedI am running Ubuntu in WUBI inside Windows, my first question is, can you do a full install to a new partition through the WUBI installation? Or would it be better to partition the disk, and just install Ubuntu, then deal with the MBR issue (been a while since I had a normal install, maybe the boot problems are gone?)? And is there any actual advantage to doing a stand alone install, while still dual booting Windows? Is there any gain from it versus the WUBI install I am running now?
View 3 Replies View RelatedInstalled Ubuntu from an iso and now can boot only from /dev/loop0 need to clone this to /dev/sda, is this possible if so what are the commands.
View 9 Replies View RelatedI had Vista installed then Ubuntu Grub showed both... then I wanted to try Fedora 13 an after install I had Fedora Bootloader but it only shows Fedora / other and other is Vista... how do I manually enter Ubuntu partition into /boot/grub.conf or should I just reinstall ubuntu grub and hopefully that will pick up vista and fedora? Lost on where to go with this.
View 6 Replies View Related
