Fedora :: F13 Sends Corrupted Files Over Bluetooth?
Jul 21, 2010
It seems there is a bug with F13Files send over Bluetooth to my WM phone are corrupted.When I send files, the Bluetooth transfer starts normal, then when the transfer finishes the window stays open (like it does not complete the transfer).I am unable to run or use that files on the WM (they are binary or data) so I assume they are corrupted. I have no problem with Ubuntu/Opensuse (I have a test disk with Ubuntu and OpenSuse) only with F13.
I am attempting to copy files from one server to an external USB drive on a second server. Both servers are running custom RedHat Linux, kernel 2.6. Both are setup as Check Point SecurePlatform (one is a log server and the other a management server). I am trying to archive files from one (HP DL380 G5) to the second (HP DL380 G6). I am not able to archive directly to the external usb drive when connected to the HP DL380 G5 (data gets corrupted and switches to read-only access). The external USB drive has no issues when connected to the HP DL380 G6 server, thus my reason for trying to copy the files across servers.
When I attempt to use scp to copy files between the server, I am prompted for the password. Once entered the debug shows the authentication is successful, but then no files are copied (see log below). I have tried searching for potential answers, but none have panned out. Unfortunately I can't yet post the actual scp debug log output as some of the text is viewed as a URL and not yet allowed for me. I have changed all the atsign symbols to '(a)' to avoid the URL inference.
Output log from scp attempt follows: [Expert(a)server1]# scp -p -r -v /var/fromhere/* copyfile(a)server2:/media/disk/tohere/ Executing: program /usr/bin/ssh host server2, user copyfile, command scp -v -r -p -d -t /media/disk/tohere/ OpenSSH_3.6.1p2, SSH protocols 1.5/2.0, OpenSSL 0x0090707f debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Rhosts Authentication disabled, originating port will not be trusted. debug1: Connecting to server2 [192.168.10.3] port 22. debug1: Connection established. debug1: identity file /root/.ssh/identity type -1 ..... debug1: Exit status 1 lost connection [Expert(a)server1]#
I download the live 64 and burned it to a disk after it burns to the disk Brasero checks and says "error some files could be corrupted." I burn it slowest burn same thing happen. I downloaded thinking I had a corrupted download. Same thing happen. I never had a problem burning iso until now. What am I doing wrong?
I'm using fedora 13 x86_64 on amd machine. I use usb bluetooth dongle. The bluetooth service doesn't start at all. When I click on bluetooth icon-preferences-turn bluetooth on, after some time it says, bluetooth is disabled. What should I do to enable bluetooth?
I just bought a Bluetooth dongle for my laptop with fedora on it and cannot get the Bluetooth service to start. Tried to do the same on my imac running Fedora and the same thing happened, it said service refreshing and never did.
I have all of my music in mp3 form on an external HD. When I copy it to my home folder for use in Banshee 2.0, some of the music files become corrupted.When these copied mp3s are played, they have annoying, intermittent distortion throughout some of the songs. In an effort to try and isolate the problem, played one of the distorted songs directly from the file on the external HD, and it played flawlessly. I then downloaded Clementine and had the exact same distortion on the playback from the copied file, and then no distortion from the external HD file.
So at this point, it seems like the mp3 are getting messed up when they are being copied from the external HD to the computer.I am using a USB 2.0 port for the file copying.
I recently downloaded a copy of Kubuntu from the official website...when i finished downloading it and tried to run it inside windows, my virus scanner immediately picked up several malware inside temp files in my computer called win32 antivirus. I attempted to install kubuntu on my computer on a partition (i've previously done this on other computers no issues) but it had multiple partitions. Instead i tried to do a clean install of kubuntu then attempt to install vista again then. However it is now telling me my files are corrupted and will only operate Kubuntu. This is not what i want, i wanted to operate both on partitions as i haven't completely figured out how to use kubuntu?
I'm having problems with the ftp-server ProFTPd,If I transfer files from a Linux host to a Windows client, it says that my transfered files are damaged, so I'm unable to open them..I've searched this forum and several people say I have to set the default transfer mode to 'binary' mode.I did that, but it didn't work at all for me... so despite the binary transfer mode my files are still damaged when I transfer them.when I do it through SSH, it works fine, so the problem is the FTP-server...
before i proceed,I'll like to say that I'm a complete newbie, but enjoying my time with Ubuntu.
Recently, due to hard disk failure, some of the System files got corrupted, I have no idea to which files, but booting Ubuntu from the latest kernel is not working, instead I have to select the previous version from the grub screen.
How to recover these files? Is there a way by which Ubuntu automatically scans and repairs the system files.
I downloaded latest Ubuntu version 10. I bruned it to CD disc. I run WUBI.exe. Some files copied to the hard drive, but the error message interrupted in the middle of the installation process. It said unable to install -- permission denied. I don't see what is wrong. My Windows XP is full administration control. All the files should be able to write to drive c without any problem. What is the cause? Could files in ISO image be corrupted?
I had a usb stick running ubuntu. A coworker used this install to go around some of my companies security measures, and I was told to hold on to the usb stick in question. I copied all the files onto another usb stick in case something went wrong with the first one.
The problem: The first usb stick that was bootable has become corrupted. I still have the files from the disc, but they're not on the bootable stick.
Can i just use something like unetbootin, reinstall ubuntu, then drag all the files over?
In my Downloads folder I have a message that says "Personal File Sharing You can receiee files over Bluetooth into this folder"I can't figure out how to get that to go away.
My HP Netbook crashed. The Windows XP system files corrupted and Windows absolutely will not run. I planned on using Ubuntu to recover it, and then install Ubuntu permanently to save it in the future. Before you ask, every other utility has failed on me. UBCD included, which did nothing but provide me with errors upon errors just trying to run it.
The netbook has no CD drive.The only internet around is a wireless signal... my netbook has a broadcom wireless card that is never recognized. I'm using someone elses working laptop to connect online and get things I need, make boot devices, research for help, etc.This laptop has barely any hard drive space. Currently it has 1 gb remaining for doing anything.I have three flash memory devices:2 gb SD card. My netbook refuses to recognize it as a boot device.2 gb flash stick (that's actually an mp3 player). My netbook refuses to recognize it as a boot device.512 mb flash stick. This DOES work as a boot device.
So far my 512 mb flash stick has run Damn Small Linux and Ubuntu Minimal on my netbook. Of course, both are useless because the netbook cannot access internet, nor does either OS recognize my wireless card. This flash stick is, obviously, too small for a regular Ubuntu installation or any other Linux distribution that can help (as far as I know).
So, in order for this to work, I have to be able to do one of the following:
Install Ubuntu from a different OS, like Damn Small Linux or something small enough to boot on my 512 mb stick. Ubuntu can be put on one of the other, larger devices, maybe to be accessed for installation. No idea how to do this, let alone safely.
Install Ubuntu Minimal OFFLINE. This question was asked multiple times on these forums and none were answered. Is there a way to run minimal, and use offline sources for the install?
Get the normal Ubuntu installer under 500 mb. Its overwhelmingly frustrating that I'm just barely unable to do this. I've read of Ubuntu Customization Kit, which ended up being lots of useless files and reams of gobbldegook. I've heard Ubuntu is packed with additional, nonrequisite software which makes it so large. Why can't there be a halfway version between normal and minimal?? Not everyone has internet and not everyone has a CD drive or large USB stick! Is there a way this can be accomplished? Does this version exist?
I have limited time and resources. Before you ask, no, I cannot afford a larger USB stick. I'm pinching pennies right now and there's nowhere near here that sells them anyway.
I'm COMPLETELY new to linux. I"m running Ubuntu 9.10 and TRYING to install Devede. I have tried the Terminal, Synaptic Manger, and the Add/Remove and still keep getting this same error. I'm running a regular 32 bit Pentium 3 process to test if I like Linux or not. this is what it says: E: /var/cache/apt/archives/libavcodec-extra-52_4%3a0.5+svn20090706-2ubuntu3_i386.deb: corrupted filesystem tarfile - corrupted package archive this is not a DUAL boot computer either.
can't receive files via bluetooth whatever I do. When sending from mobile the file transfer dialog opens, but error pops up "Cannot connect to OBEX device". "Cannot copy file.. The remote system refused the network connection"I have
Code: $ sudo dpkg -l |grep blue ii blueman 1.21-2ubuntu1
I use fedora12-Gnome as my major desktop OS. Every basic need was fulfilled , until I tried Fedora12 KDE. The problem is with Bluetooth connectivity to my cell phone device.It connects to the cell phone and set trusted but I can't seem to see any option of "Browse files on Device".Does that mean in KDE I actually can not browse my Bluetooth connected devices?The same thing happened with Mandriva2010-Kde and Fedora13 Kde , I mean I guess It's related to KBluetooth app.
just installed Peazip 3.1 from the repositories, and whenever i try to compress any file, i get a "some input files cannot be read (locked or corrupted)"
I can send files to my bluetooth mobile phone, but when sending a file from the phone to the PC, the phone issues an error message "Sending failed", and I can not figure out, why. /var/log/messages does not contain any related entries. Do you have any idea where to look for the problem? I am using KDE. I found many complaints about the same problem, but they all date from 2007-2008, so I guess this is not the same problem.
The computer and phone are paired, and transfer starts, but after 4096 bytes it says:Transfer finished with an error: Error sending object. I'm running 64-bit Lucid and Maemo 5 on the phone. Here are some of the things I've tried, following the docs, and the errors I get:
Code: ~$hcitool info 3D:F7:2A:60:7A:40 Requesting information ...
I am having an problem with bluetooth. Computer seems to find my mobile phone, I can send files from PC to my phone, but not vice versa. As I try to send, it pops "Failed" (in phone) and nothing happens. Kubuntu 10.04 Windows mobile 6 (HTC p3450).
I'm running dual boot with Vista and Ubuntu Lucid Lynx. for few days i was running Ubuntu only, downloaded some files and created some directories. few minutes ago, i switched to Vista to see something and i wanted to burn some of the files i downloaded using Ubuntu but couldn't find those folders.
i thought maybe its related to different file system or something so i switched back to Ubuntu and surprise! my folders are not there, instead i got a file, of unknown type with the same name as the folder had! in another folder case it's was an image (some print screen of my browser screen - Mozilla) and again with the name of what was the folder! first - what the hall had happened? second - can i recover my data somehow?
how to transfer files from my mobile phone to my opensuse 11.4 pc via bluetooth? ntw i need to buy a bluetooth car or equivalent maybe is there something common, chip and easy to set up?
ok, so im pretty mad right now, i've tried to download the iso image of fedora 13 twice today and just to get the same error on both, it says the file is corrupted or it has been altered, the checksum isn't correct, so is it a problem with fedora or what? i downloaded both from their website. what can i do? i don't want to try just to get the same result.i finally got the iso ok, the solution? downloaded it on window$.
i have a bluetooth modem (BlueSMiRF) that is connected to Arduino Duemilanove. I am trying to see serial communication messages from the bluetooth modem.
I have Blueman Device Manager that enabled SPP (Serial Port) and it says :
Code: Serial port connected to /dev/rfcomm0 How do I see the serial communication on this?
I tried on console
Code: $rfcomm listen 0 but it's stuck at Code: Waiting for connection on Channel 1 Is there any other way to listen (and also send) to serial comm msgs on bluetooth?
