I am using an Abit NF7-S V2 mobo to set up my dual boot system where each OS (XP & Ubuntu) will run on a totally separate HD (as opposed to both OS�s being set up on one HD). Since they will be running as stand alone boot drives, how does one set it all up so that one can boot from one or the other? I don�t see how I can do it from the bios. How do I do it?
View 2 RepliesI have tried (a few times now lol) to get this setup. I am using Windows 7 64-bit and Ubuntu 10.4 64-bit. I have Windows 7 installed on one hdd, another hdd has the System Reserved partition along with a data partition for files, the third hdd is the one where I want to install Ubuntu. I have found numerous tutorials on installing them both on the same drive, but not on separate ones. The couple I have found haven't really worked.
I think that Ubuntu is installed correctly but there is no option to boot into it. Windows 7 just happily loads itself. I have tried reinstalling and selecting 'sdc1' (the native ubuntu partition) as the location for the bootloader to be installed and then used Easy BCD to add that location to the windows bootloader which gives the option to load Ubuntu but when selected dies complaining that there is a missing file (I think it just can't find the Ubuntu bootloader).
As an aside when I get to the installation screen the Ubuntu installer keeps on telling me that there are no operating systems detected on the machine (Even though I'm pretty sure the drive it is talking about 'sda' is where Windows 7 is installed). Not sure if that matters just seemed a little wierd.
I am finding it hard to get 2 seperate hard drives to work each having different OS..... windows XP and Ubuntu 10.10. Making Ubuntu the master, it can recognise the drive but cannot boot from it. If XP is the master it does not recognise the Ubuntu drive at all.
View 3 Replies View RelatedI have been messing around with the ubuntu family for some time now, and usually have no problem finding my answers. This one, however, is giving me some trouble. I have been using ubuntu on my laptop for some time now, and recently got a new 2TB hard drive for my desktop. I cloned the old hard drive to the new one, and decided to install ubuntu onto a third drive. The third drive was IDE, the new one is SATA. I disconnected the other hard drive, and so my current set up is a SATA drive with Windows 7, and an IDE drive with Ubuntu (11.04 of course)
Well, I am unable to dual boot between the two, unfortunately, and would like to figure out how. I would like to say the problem is with Windows, since that is the primary drive. No GRUB shows up upon booting when both drives are plugged in, and the Windows Bootloader does not show my installation of Ubuntu, instead it goes right to Windows.
I am new to Linux and was wondering how to make dual booting Windows and Ubuntu from 2 separate drives work. I have dual booted from the same drive but never different ones. If I install Ubuntu on the second drive how will I configure the system to let me choose on start up?
View 3 Replies View RelatedI finally have decided to give ubuntu a shot.Windows is becoming too familiar, and it's been forever since I have used command line since DOS.I really need some humility, and I think that Linux will teach me some.I am going to give it a whirl on a "spare" machine, dual booting with Windows 7 64 on two separate hard drives. I'm burning the ubuntu live cd x86 right now. I am going to unplug my windows drive and start the installation.
View 9 Replies View RelatedI have Ubuntu 11.04 on 1TB HDD and Win 7 on another 1TB HDD. Right now I have to unplug a SATA cable to get to boot into one or the other. What is the best way to be able to pick. I don't care which OS I do it in or which is the primary, if there has to be one. I have an MSI mobo.
View 2 Replies View RelatedI've been trying to properly install grub for the past 3 days and failing every time.I recently bought a new computer and would like to dual boot Windows 7 64 and Natty. On my previous machines, ubuntu installer has automatically detected windows. It does not do so on this machine.I have three hard drives: 2 ssd's and a single 3 tb drive for storage.
I would like one ssd for windows 7 and one for natty.Currently, I am able to boot into both OS's but only by altering the boot sequence of the drives from the bios. I am hesitant to install grub to the windows drive for fear I will lose the ability to boot into windows. I did this early in the discovery process and ended up having to reinstall windows.
After I complete a big project I'm working on I'm going to be wiping and re-doing my desktop machine, probably in the next day or three. I'm going to be setting up a dual-boot; my first in about three years. I'll be using separate hard disks for this, and installing Slackware second on the bigger of the two drives. When I've done this in the past I've used Grub; Is there anything I need to know or pitfalls I need to avoid doing it with Lilo?
View 5 Replies View RelatedWe were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).
Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).
W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.
There are plenty of postings re integrating W7 to the Grub-menu.
This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.
Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows
So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.
I'm in widows xp sp3 right now, I'm just wondering how do I go about, setting up dual booting with out breaking my Windows Xp OS, being last time - I setup Dual booting with the Ubuntu setup disk and that didn't work at all, Xp was broken after that. Would anybody know of software that does the dual-booting setup from windows with the linux ubuntu iso image?
View 9 Replies View RelatedI am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies View RelatedI have an HP Elitebook 8540w with 500gb hdd running win7.I plan to replace my blue-ray drive with an ssd using a hhd caddy. The problem is that i want to keep my first hdd (win7) as it is, and install on the new ssd 2 operating systems:win10 and debian 8.
View 3 Replies View RelatedGot Wintendo7 on one samsung S-ATA disk. ( need it for starcraft2 and Homeworld2... sorry.. )
Now..: Booting Debian Unstable from USB or CD-ROM, then start installer. Tell it to install on second samsung S-ATA disk.
Before I go on, I just feel i will get into some serious trouble with GRUB?
Or will the installer understand, and see the windows7 installation and add it to Grub?
If not, what should I do inside /boot/grub/menu.lst when Debian is up and running?
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
The hardware is a psystar box with 2 drives for os x and ubuntu respectively. I attempted install of ubuntu over older version of xubunut without physically disconnecting the os x drive After install I could not boot into either system. THEN I remembered something about the install problem that 10.4 has and installed ubuntu again, this time following the instruction regarding booloader install. Now I can boot ubunut fine, but of course when I select drive holing os x it hangs on 'Verifying DMI pool data....' I've been looking at some thread on here about dual boot problems with Win7 and such, but are any of the recommended diagnostic and repair steps relevant to my case, specifically testdisk and bootinfo scripts?
View 1 Replies View RelatedI have 2 sata HDD, I wish to dual boot, but in a way to have Windows on one and Ubuntu on the other.
For some reason I could not get Ubuntu (10.04) to install from the live CD or Wubi or from Windows on the same HDD.
I downloaded the advanced distro and went with that straight onto the HDD and it has been a gem (love how it just works with no drama).
I want to install windows XP again on the 2nd HDD, as there is one game that I play in windows. (I've got it to work in Wine I just don't like / can't get used to it)
My Question is: installing windows on a 2nd HDD and then being able to choose which one to boot.
I've read about installing Windows after Linux in the user guide and reinstalling grub2 - I got the impression though, the they were installed on the same HDD and thought that what I want to achieve may differ?
Fedora is having trouble identifying a raid partition, it sees them as separate drives. I got drivers from dell, but during a Fedora dvd install, it mentions nothing about a place to install extra drivers.
When it says it must "initialize" the drives, Fedora then breaks the dell bios raid. How to either install the dell drivers or make Fedora see the raid partition as one?
I would like to have 1 hard drive operate with Ubuntu 10.04 and another with Windows 7 Pro, with a proper boot selection menu when I boot up my computer.
View 5 Replies View RelatedI have Windows 7 x64 on a RAID0 Setup and have a separate 120GB Hard Drive and want to DualBoot with Ubuntu! How do I go by doing that seeing that LiveCD is not detecting Windows 7 Loader?
Twitpic : [URL]
I'm 'trying' to dual boot WinXP and Ubuntu 10.10 from 2 separate HDD's. Currently I'm on attempt number 6 but my patience wore thin about 2 days ago - here's the current state of play: I have WinXP running fine (Was installed first) and I have Ubuntu running fine if I use a boot loader disc. I don't have any boot options at all - if I let the PC boot naturally then it just loads XP as normal. I followed this guide to the letter: [URL]
(For those that don't want to read the link: It get's you to create 4 partitions on a drive - 1: ntfs for winxp (not touched) 2: Linux partition 3: linux-swap partition 4: fat32 osshare partition) then if you get no boot options, it creates an ubuntu.bin file which you move to the C: and edit the boot.ini to include it in the options). But all the difference it makes is I get boot options, I press Ubuntu and my computer sits with a blinking cursor for as long as you let it.
I'm breaking into the OS drive side with RAID-1 now. I have my server set up with a pair of 80 GB drives, mirrored (RAID-1) and have been testing the fail-over and rebuild process. Works great physically failing out either drive. Great! My next quest is setting up a backup procedure for the OS drives, and I want to know how others are doing this.
Here's what I was thinking, and I'd love some feedback: Fail one of the disks out of the RAID-1, then image it to a file, saved on an external disk, using the dd command (if memory serves, it would be something like "sudo dd if=/dev/sda of=backupfilename.img") Then, re-add the failed disk back into the array. In the event I needed to roll back to one of those snapshots, I would just use the "dd" command to dump the image back on to an appropriate hard disk, boot to it, and rebuild the RAID-1 from that.
Does that sound like a good practice, or is there a better way? A couple notes: I do not have the luxury of a stack of extra disks, so I cannot just do the standard mirror breaks and keep the disks on-hand, and using something like a tape drive is also not an option.
I have two hard drives windows 7 is on one of them and Ubuntu 9.10 is on the other. Both drives are 320GB, but different models of drives by Seagate. Both drives are detected by the BIOS and both drives are detected by Windows, but only one drive is detected by Ubuntu during the installation process. I had to literally disconnect the Windows drive to get Ubuntu to recognize the drive I wanted it on. Now that Ubuntu is completely installed and a new Kernel has been downloaded and installed it finally recognizes both drives as existing.
There is some kind of problem with the Installer and the original Kernel that kept it from seeing the second drive. I will literally have to manually edit Grub to get it to boot the Windows drive. How do I edit Grub? and what kind of Grub command would do the trick? I searched for "multi-boot" and literally read them all, there was one thread about multi-boot on multi-drives, but it did not fit because the Installer recognized both drives with that thread. I have to change the boot order in the BIOS to get the drive to boot that I want currently.
I have 3 hard drives installed to my system, 1TB, 2TB and 500GB drives with the following configuration:
ledi@ledi-ubuntu:~$ sudo parted /dev/sda print
Model: ATA SAMSUNG HD103UJ (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[Code]...
I can boot to the Ubuntu installation in the 2TB drive. My problem reversed when I reinstalled grub to one of the Ubuntu installations in the 1TB drive. I can boot to any of the OS's in the 1TB drive, but not to the Ubuntu in the 2TB drive. The error message is the same as above. I have no idea what am I doing wrong and I would be really grateful for any assistance.
I have been trying to move away from Windows2000 on Ubuntu for months. I have a few applications that I run on Windows that I have been unable to find usuable equivalents on Ubuntu eg Outlook/Mobile sync application required for my job and a DVB TV card application for home. So it looks like I am stuck ruuning W2K and Linux for at least a while and indeed I have been using GRUB2 to select between W2K and Ubuntu.
I need some basic advice about setting up GRUB2. My philosphy when it comes to PC data is you can never have enough backups and I avoid any single point of failure. So I have always used two hard drives which I keep in sync almost daily with FreeFileSync. I also swap my most critical encrypted data between a laptop and desktop. Then I also alternate external USB drives stored away from my home.
My current partions are
When I installed on the Ubuntu 500GB I let it & GRUB2 take the default options so it boots from Hd1 and I assume certain executables are stored at the begining of the Ubuntu partition as well as configuration files in its file system.
Now I'm replacing the 500GB with a 1.5TB and the old 500Gb will become my backup drive. I want to keep the backup drive bootable in its onw right. If either hard drive fails I want a bootable system and acccess to my data.
So my plan is to use the following partitions.
I can install W2K on the 1.5Tb from scratch or use Acronis to restore an image file. Then I can install Ubuntu from scratch.
OK now for my questions.
1) Can I get GRUB2 to put its executables and configuration files on a small partition of its own? I see no reason why they should be dependant on a specific Ubuntu partition. I have read posts mentioning this but not sure if this has to be a bootable Linux or just a file system with the config files.
2) Can I run update-grub on any Linux and store or copy the config files to the partition in 1?
3) I will use BIOS to determine which hard drive is first to boot. When I run update-grub (or when it runs during the new Ubuntu install on Hd1) I dont want GRUB2 to do anything with Hd2, not even know Hd2 exists, it that an option?
this may be a very stupid question, but. My computer has two hard drives. One has Windows XP installed on it. The other is blank.
Is it possible for me to install Ubuntu onto the second hard drive, and run a dual-boot using GRUB during startup? Or does it only work when both OSs are on the same hard drive?
I would like to install Ubuntu 10.04 on my new 1 TB hard drive. I currently have Windows XP installed on a 160 GB hard drive for things that I cannot do on Ubuntu. I would like to know if it's possible to install the other hard drive, and then dual boot Windows with it? Effectively dual booting across two hard drives. I wouldn't care if GRUB replaces the standard Windows bootloader, just as long as I can choose between the two at startup
View 9 Replies View RelatedI've been using ubuntu exclusively on my two laptops lately, for coding and all of my other work. I plan on installing it onto my desktop now for work as well, but I would like to retain Windows 7 so I don't have to worry about compatibility for all of the games I love to play. My question is this:When setting up my partitions, how much space (and what format) should I set aside for windows to write and read games from? I have a 500GB hard drive currently, and was planning the partitions as:
1. Windows 7 (NTFS, setup with Windows installer) ~20 GB
2. File Storage (NTFS, set up with the Ubuntu install partitioner) ~452 GB
3. Ubuntu (EXT3, set up with Ubuntu install partitioner) ~ 20 GB
4. Swap (~2x the size of my RAM) ~ 8GB
The plan is to have Windows install and execute games from the NTFS File Storage partition, while being able to access the same partition from Ubuntu for my documents, code files, music, etc.I don't know if this would work, and I'm also not sure what my file system will be like (windows or linux-y?) if it did. Will this work? Or is there a more elegant solution?
I've used it once before but got fed up with the boot asking me everytime I turned my laptop on because I wasn't using it enough. I have Windows 7 on drive C . I want to keep it on drive C. I have several 1.5TB+ drives, and one of them is not being used. I want to dedicate it to Ubuntu, and be able to do a dual boot with my Windows 7 install. Is this possible? If it is, what about when this drive is not connected to my laptop? Will that mess up the boot process?
View 2 Replies View RelatedI just bought a new Windows 7 machine and want to install Ubuntu 10.10 for a dual boot environment.There's a lot of info describing how to do this, but it all describes re-partioning the Windows drive, burning Ubuntu on a CD, inserting that CD, etc. I had a dual-boot Windows and Ubuntu machine that just died on me. Windows was on one hard drive and Ubuntu - along with my entire software development environment - was on the other. As far as I know both drives are fine.
When my new (Windows) machine gets here I want to open it up and stick in the Ubuntu hard drive from my old machine... but then I'm not sure what to do. I'd really like to be able to boot to that hard drive (or the Windows one), just like I did before. It seems that this should be simpler than installing a fresh Ubuntu from a special CD, after all, everything is already expanded and working on the hard drive. Can someone give me some pointers that will help me solve this problem?