Has anyone installed a wireless USB adapter right out of the box with 10.04? I've just spent 5 days trying to get a D-Link DWA-125 to work, and I (and don't buy a DWA-125!)
View 9 RepliesI have 10.04 now and had a lot of issues with my usb adapter and could not get it to work. Now, I consider upgrading to 10.10 and want to know if anybody has succeeded to successfully install USB driver for the wireless usb device. Last time I was trying some kind of CNet and Netgear with ndiswrapper and found on this forum out that those devices were not working for others either. please write some words here which USB device did work for you on 10.10, 64bit.
View 9 Replies View RelatedI have a Dell Vostro 200 running Ubuntu 9.10 (Karmic). I want to add Bluetooth capability to my machine. Can anyone recommend an USB Bluetooth adapter that is known to work with Ubuntu 9.10? Perhaps specifically Vostro 200, but I know chances of that might be small.
View 7 Replies View RelatedI just started using Ubuntu 10.10 recently. and Im not really sure how most of this stuff works. I could probably figure most of it out myself, but I have a question about using a wireless USB stick for internet.I do not have internet on my desktop (the computer with linux on it) and the only way i can get it is by using a Dynex Wireless G USB Network Adapter.
I do not have the disk for it. and Im guessing linux doesnt have the autoinstall thing that windows has (no offense to linux, im starting to love it more than windows). I have the driver for it on my windows computer. I was wondering if i could run the driver from a usb thumb drive.If not, then how can i get the network adapter to work?
I am new to Linux and actually just finished my install about 30 minutes ago. Ubuntu 10.04 isn't recognizing my wireless adapter, so I need to install the drivers. I know where the drivers are, I just don't know how to install them on a Linux system.
Here is the driver page. I don't know how to download the .inf file (necessary?) but I have ndiswrapper, bcmwl5.sys, and sp33008.exe all in the downloads folder.
Apparently just double clicking the files does nothing, so what do I do now?
I have Ubuntu 10.4 and I have a skylink usb wireless adapter. It came with the driver on a disc but I don't know how to install it. I looked at the README file but I don't understand what to do.
View 14 Replies View RelatedI am also trying to install a wireless driver, but mine is for the Ralink 5370 USB wireless adapter. Do you have some patches for that driver, and could you show me how to install the driver?
View 9 Replies View RelatedDELL Inspiron 15 3543 (3000 Series)5th Generation Intel Core i5-5200U Processor (3M Cache, up to 2.70 GHz).I have installed Debian 8 and received following message relating missing firmware files rtl_nic/rtl8106e-1.fw (EDIT: I understand this is not wireless adapter, but wired adapter which appears to be working ok as I can connect to internet ok.)The wireless adapter wasn't recognised so I used LAN cable and completed the install.this is details of wireless adapter....
Code: Select allit@it:~$ lspci -vvnn | grep -A 9 Network
06:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[code]...
is there a wireless adapter for linux with plug and play installation?USB or PCI/PCIE no problem.
View 14 Replies View RelatedI am doing network config of my laptop. I'm new to Fedora, so I'm not sure how it goes ...
I have an Ethernet device (eth0) and a wireless device, wlan0
Status in system->administration->network:
Tab devices:
eth0 : active
wlan0: inactive
Tab Hardware:
eth0: system
wlan0: configured (description: b43)
Double clicking on the wlan0 line gets you to Network Adapters Configuration, where adapter b43 grayed out) is associated with device wlan0. So far, so good (I did all the fwcutter stuff, so I assume this is the result). When I installed the system (from installcd, then update, then install broadcom-wl, ...) I configured it to be started up with network manager, automatically on startup. I managed to get it working exactly once in that session.
Problem is, it doesn't start up and the wireless is not even visible when you click the network manager icon. For that matter, eth0 does not start automatically either, but at least there is a button to start it in network manager. Coming back to the tab devices, clicking on wlan0 allows you to click on the activate button ... but there it says: Cannot activate network device wlan0! b43 device wlan0 does not seem to be present.
I downloaded from the following link: [url]... etinst.iso and i have a working flash drive Debian installer. I would like to be able to integrate driver support for my wireless adapter or my gprs phone for internet access during install so that I wont have to be connected via ethernet.
View 2 Replies View RelatedI'm using LiveCD to test my laptop with FC 14. It booted from the LiveCD image last night, but my wireless didn't work. I need the madwifi wireless drivers for my built in Atheros adapter.
Can I download the latest and greatest madwifi drivers, compile them and use them while running from the LiveCD image?
I got a laptop that I'd like to install Ubuntu on (I've done this numerous times before). But this one already has 4 partitions on it, and the Ubuntu installer complained that you can't have more than four. I know you can make a logical or whatever partition that holds others sub-partitions, but I'm not sure the best way to do it without destroying data from the other partitions.
The existing partitions include: a recovery partition, the primary windows partition (large size), a small boot partition, and a special partition for hp software that can run without booting windows. Can I convert the windows partition into a logical partition or something like that which can be divided up, without wiping out the windows files and data there?
And yes I know I can use the wubi installer, but I prefer a more permanent solution (Ubuntu is my primary OS, but I don't want to wipe out Windows at this point).
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
I want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?
View 1 Replies View RelatedI have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
I have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies View RelatedI own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies View RelatedI use openSUSE 11.3 with KDE 4.4 and I have a Belkin Share Wireless USB Adapter (F7D2101 v1) , I attached the adapter and rebooted the system, it does not work. Can someone help me configure?
I attached the adapter and the system says:
dmesg | tail
[ 1184.799076] usb 1-1: USB disconnect, address 2
[ 2003.060031] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 2003.194525] usb 1-1: New USB device found, idVendor=050d, idProduct=845a
[ 2003.194531] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2003.194535] usb 1-1: Product: Connect Wireless USB Adapter
[Code]...
Following sticky Thread: Getting Your Wireless to Work - Everything seems okay through step VI, getting an IP address through DHCP. It appears that authorization is failing. Results from steps in sticky:
Note: This is a new installation of openSUSE on fresh (formatted) workstation
Step II What device? Hardware info from YAST - Wireless LANUSB2.0 WLAN (wlan0)Kernel Driver: zd1211rw lsusb reports "Bus 001 Device 002: ID 050d:705c Belkin Components F5D7050 Wireless G Adapter v4000 [Zydas ZD1211B]"
Step III External firmware? I downloaded the b43 packages, installed as normal and used etc/SysConfig editor to add b43 to modules loaded on boot.
dmesg|grep firmware
[ 22.468807] zd1211rw 1-3:1.0: firmware version 4725
Ran the following check from another thread
rfkill list all
0: phy0: Wireless LAN
[code]....
However I am having some issues with drivers. I need to install a Patriot Wireless N USB wireless adapter in Crunchbang but when I follow the directions for installing the drivers and am using the command "make" I get an error that says '*** /lib/modules/2.6.32-5-amd64/build: No such file or directory. Stop . *** [modules] Error 2"
View 1 Replies View RelatedI'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.
View 4 Replies View RelatedI am currently running openSUSE 11.4 on my Toshiba A505 laptop. I'm not certain about the exact model number of the wireless adapter but I believe it's made by Realtek. It does not show up in my list of network connections in YaST so I assume I'll need a driver for it.
View 7 Replies View RelatedI want to add Fedora 14 to my triplecore 3GB RAM computer which has windows, Fedora 12 & ubuntu installed. What are the recommendation (e.g. size) for harddisk partition allocation? I can reuse the swap partition, can't I? Should I install Fedora 14 to a single partition (ie. /)? Should I use only ext4?
[Code]...
I'm new to openSUSE, and Linux in general. I have downloaded the following file from the D-Link site:
dwa140_BETAdriver_1201.zip
I've copied it to a dvd, and have placed the dvd in my openSUSE machine. I've made several attempts at installing this myself, but Linux has me a bit stumped.
It worked on install but quit after the first system update. The "Enable Wireless" checkbox will not stay checked. I've attempted to manually install the madwifi driver to no avail.
kernel: 2.6.35.11-83.fc14.x86_64
device: Atheros AR928X wireless adapter