I have Ubuntu 10.4 and I have a skylink usb wireless adapter. It came with the driver on a disc but I don't know how to install it. I looked at the README file but I don't understand what to do.
View 14 RepliesI am also trying to install a wireless driver, but mine is for the Ralink 5370 USB wireless adapter. Do you have some patches for that driver, and could you show me how to install the driver?
View 9 Replies View Relatedtime Windows user here; limited line command experience from early computer learning; Just wiped my drive and installed Ubuntu. How do I install a driver for the netgear wireless adapter - it was already installed in the machine. I've downloaded the driver believed to work. What next? Also, any instruction on educating myself on Linux/Ubuntu basics?
View 14 Replies View RelatedI am brand new to Linux and Ubuntu. However it was very easy and smooth to install and get updated using my wired ethernet connection. I am now trying to understand how to have my wireless network adapter recognized or driver installed. I will be searching around the forums but it suggested I make an initial post as a new user. I am using an older Dell Inspiron 2200. I believe the chipset in my wireless adapter is indeed Broadcomm, so hopefully that will help direct any responses.
View 2 Replies View RelatedLooking for driver for Linksys Wireless Notebook adapter WPC55AG
View 1 Replies View RelatedDoes Ubunto have a driver for the WPC100 Linksys Adapter wireless card?
View 2 Replies View RelatedI am currently running openSUSE 11.4 on my Toshiba A505 laptop. I'm not certain about the exact model number of the wireless adapter but I believe it's made by Realtek. It does not show up in my list of network connections in YaST so I assume I'll need a driver for it.
View 7 Replies View RelatedI know this isn't the place for this but I am having trouble with my wireless with Linux mint but ubuntu forums feels more friendly and knowledgeable about these problems the wireless adapter in question is a HornetTek HT-H5DN I have been to the company website they do have a driver but I can't compile it due to lack of experience it runs on a Ralink 2720 driver.
View 4 Replies View RelatedI have been struggled with wireless connection. Here is the things... My room doesn't have moduler jack. So basically my landlord is sharing with his wifi. Also, my desktop is using Netgear wireless adapter for internet. My laptop and desktop are windows 7 which can conncet with internet very well. But my Linux Os in my desktop couldn't conncet. Recently I installed ubuntu because my co-worker told me ubuntu can be applied to connect with internet through wireless.
However, how can my ubuntu os get wireless connection without ethernet cable. Actually, my harddisk drive is multiple boot containing windows 7, Ubuntu, and Centos. Windows 7 can connect internet smoothly. But you know, Ubuntu and Centos can't do nothing. So I am stacking this situation not to connect internet through Linux OS right now.
My Netgear USB adapter is WG111US.
Does someone know where i can find the driver for the wireless adapter RLT8191s?
View 8 Replies View RelatedI am a complete novice when it comes to Linux. I have just installed Debian 5 and i would like to get the wireless adapter working. I have a Ralink RT2070 54Mbs Wireless USB Adapter and the driver disk. What are the steps/commands i must follow to install the driver please?
View 15 Replies View RelatedApparently, the wireless adapter Realtek 8171 uses the rtl8192se driver, which is currently available only as source from Realtek's website. Is building a driver equal to building a package? Should I follow the same cautions, say these ones?
View 9 Replies View RelatedI have a desktop and I just installed ubuntu 10.04 as a dual boot with windows 7. My desktop has a wireless ZEW1642S card. I don't have access to a wired internet connection, but I can use the wireless on my windows 7 fine. It seems like there is no driver for it to work on ubuntu, and since I don't have an internet connection while in ubuntu, it seems I can't update it of course because I need internet to update. My wireless network does NOT have a password if that even means anything for this. I have the exe installer for the driver for it but I don't know how I'm supposed to get the INF file or whatever.
View 9 Replies View RelatedDoes anyone have a driver for Cisco Aironet PCMCIA AIR-CB21AG-A-K9 wireless adapter that works with Ubuntu 11.04? Ubuntu does not see the card when plugged into the PCMCIA slot. I thought that if Ubuntu had a driver installed, it would pick up the device.
View 4 Replies View Relatedfinding and installing a driver for the Linksys WUSB300N wireless adapter.
View 1 Replies View RelatedI recently switched from Windows XP to a clean install Ubuntu Karmic Koala 9.10 but it seems to be quite a problem to get the wifi up and running. In Windows the nearby network all appeared in network connections but the same section in Ubuntu is empty. So I decided to go with the ndiswrapper guide to solve the problem with an unclaimed driver. After an entire day messing with my computer I'm still not close... Below follows excerpts taken from the Ndiswrapper guide with posted results from my computer. "ndiswrapper won't work until it thinks that your Windows drivers have been properly installed and that they are the appropriate ones for your wireless card. You can run the command: ndiswrapper -l"
result:
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net5211 : driver installed
device (168C:0013) present (alternate driver: ath5k)
So I've posted the result the name of my wireless card below: lspci -nn
Result:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:0259]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:1259]
[code]...
It seems like the network is disabled or unclaimed or both. What to do? I'm stuck after spending an entire day trying to install the wifi. I had no problems in Windows XP but it seems to be quite impossible in Ubuntu.
However I am having some issues with drivers. I need to install a Patriot Wireless N USB wireless adapter in Crunchbang but when I follow the directions for installing the drivers and am using the command "make" I get an error that says '*** /lib/modules/2.6.32-5-amd64/build: No such file or directory. Stop . *** [modules] Error 2"
View 1 Replies View Relatedi can use internet in my Laptop. My laptop is only connected with wireless. No cable connection avilable here. Wireless is functioning well in windows 7 but in openSuSe 11.2 it is not functioning. I've searched on this issue in net and found that i've to install Packman repository or install driver from broadcom website. Please help me by giving easy way to do so. Following is the detail of my wireless device and some other information.
Code:
linux-gkpt:~ # lspci -v
0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
Subsystem: Dell Wireless 1390 WLAN Mini-Card
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at efdfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
[Code]...
I just started using Ubuntu 10.10 recently. and Im not really sure how most of this stuff works. I could probably figure most of it out myself, but I have a question about using a wireless USB stick for internet.I do not have internet on my desktop (the computer with linux on it) and the only way i can get it is by using a Dynex Wireless G USB Network Adapter.
I do not have the disk for it. and Im guessing linux doesnt have the autoinstall thing that windows has (no offense to linux, im starting to love it more than windows). I have the driver for it on my windows computer. I was wondering if i could run the driver from a usb thumb drive.If not, then how can i get the network adapter to work?
Has anyone installed a wireless USB adapter right out of the box with 10.04? I've just spent 5 days trying to get a D-Link DWA-125 to work, and I (and don't buy a DWA-125!)
View 9 Replies View RelatedI install security updates - did so and ended up with a copy of fedora that goes into a loop. I suspect the prob is the driver to my video adapter. To run, I need to interrupt grub with an escape. It then shows me two choices the bad one 2.6.32.12-115.fc12.i686 and the old good one 2.6.31.5.- 127.fc12.i686 It defaults to the bad one, I change it to the good one and tell it ot proceed. this is inconvenient
I see that in /boot/grub/grub.conf the 2 systems are described I beleive that if I merely edit that file, taking out the refernece to the bad one, I will be ok That will leave the bad one on the disk but at least I wont have to go thru the ritual of interrupting grub. If I want to delete the bad one - after I've taken care of the grub.conf file, what do I do?
where do I find the driver for 1394 net adapter in a compac athelon 3300 desktop (2005 vintage). I am helping a friend and she does not have the disc.
View 3 Replies View RelatedDELL Inspiron 15 3543 (3000 Series)5th Generation Intel Core i5-5200U Processor (3M Cache, up to 2.70 GHz).I have installed Debian 8 and received following message relating missing firmware files rtl_nic/rtl8106e-1.fw (EDIT: I understand this is not wireless adapter, but wired adapter which appears to be working ok as I can connect to internet ok.)The wireless adapter wasn't recognised so I used LAN cable and completed the install.this is details of wireless adapter....
Code: Select allit@it:~$ lspci -vvnn | grep -A 9 Network
06:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[code]...
I am new to Linux and actually just finished my install about 30 minutes ago. Ubuntu 10.04 isn't recognizing my wireless adapter, so I need to install the drivers. I know where the drivers are, I just don't know how to install them on a Linux system.
Here is the driver page. I don't know how to download the .inf file (necessary?) but I have ndiswrapper, bcmwl5.sys, and sp33008.exe all in the downloads folder.
Apparently just double clicking the files does nothing, so what do I do now?
is there a wireless adapter for linux with plug and play installation?USB or PCI/PCIE no problem.
View 14 Replies View Relatedhow to use my alpha awus036nh wireless adapter in bt3 that i am running from cd, whenever i try to scan for aps the built in adapter kicks in.
View 1 Replies View RelatedI am doing network config of my laptop. I'm new to Fedora, so I'm not sure how it goes ...
I have an Ethernet device (eth0) and a wireless device, wlan0
Status in system->administration->network:
Tab devices:
eth0 : active
wlan0: inactive
Tab Hardware:
eth0: system
wlan0: configured (description: b43)
Double clicking on the wlan0 line gets you to Network Adapters Configuration, where adapter b43 grayed out) is associated with device wlan0. So far, so good (I did all the fwcutter stuff, so I assume this is the result). When I installed the system (from installcd, then update, then install broadcom-wl, ...) I configured it to be started up with network manager, automatically on startup. I managed to get it working exactly once in that session.
Problem is, it doesn't start up and the wireless is not even visible when you click the network manager icon. For that matter, eth0 does not start automatically either, but at least there is a button to start it in network manager. Coming back to the tab devices, clicking on wlan0 allows you to click on the activate button ... but there it says: Cannot activate network device wlan0! b43 device wlan0 does not seem to be present.
I just acquired a Wi-Fire long-range wi-fi adapter, and I would like to test it with my Ubuntu desktop computer. However, my machine defaults to using an internal, discrete wireless card (not hard-wired into the motherboard.) How can I set my new wireless adapter as the default wireless connection? How can I disable my internal wireless card (without opening my computer case)?
View 1 Replies View RelatedI just loaded Fedora 10 onto my laptop and now I'm trying to add a USB wireless adapter with little to no luck (well no luck at ALL.)
# lsmod
Module Size Used by
nls_utf8 5632 0
fuse 49436 2
bridge 43796 0
[Code].....
I am new to linux and backtrack 4 and I didn't have a hard time installing it but my question is that I cant see my wireless adapter at all even in vmware settings. I am using Vmware player, backtrack 4, Gateway netbook LT2030u and my wireless adapter is Atheros AR5B95.
View 6 Replies View Related