Ubuntu Installation :: Copy Boot Drive To A Different Harddrive - Perfectly?
May 12, 2011
I am converting over to linux ubuntu 11.04, and I have used it for a week, love it. I installed an old 30gb HDD in order to install it ubuntu to try it out. Now I want to erase my primary windows XP drive and reformat to ext4, just like linux. Is there any prog or method that will make a perfect copy of what I have on my current drive ubuntu and put it on the newly formatted drive primary, so that it can boot ubuntu will all of the stuff I have on it right now?
View 1 Replies
ADVERTISEMENT
Apr 8, 2011
I tried to install ubuntu 10.04 to a 16 gig thumb drive and the installation went perfectly. However, when I removed the thumb drive and tried to boot the computer back into windows I saw that the installer had installed GRUB on to the hard drive of the computer. Windows runs fine, but it wont start with out the thumb drive that has the ubuntu install on it, this is very bad for me. Is there a way I can remove GRUB with out messing up windows on the computer? i dont have a windows 7 boot disk so this operation would need to be done either in windows (already booted) or ubuntu.
View 3 Replies
View Related
Aug 15, 2010
I cannot find this usb-creator. I want to install Ubuntu 10.04 x64 to a laptop harddrive using a USB drive. I think this is what I need but I am not sure. I tried mounting an ISO of Ubuntu, but did not find usb-creator. I tried some "sudo apt-get install usb-creator" command (cannot remember exact syntax, but the install succeeded) but I cannot find the installed application. If this is indeed the utility that I need, where do I find it?
View 2 Replies
View Related
Nov 10, 2010
I decided to tk tha plunge with ubuntu !
For this I repartitioned my harddrive (erasin org windows) into 3 drives. :
Now I want to use drive 3 as a common drive (music and pictures nd documents). Bet windows and linux.
View 1 Replies
View Related
Jun 24, 2011
I want to install Fedora 15 on my new computer. It has 1 new 3TB hard drive. I know I need a GPT to use all the space. Does Fedora15 installer support setting up this drive to boot from GPT?
Will there be any issues if I try to load windows 7 on another partition after I install fedora?
Yes my motherboard has UEFI.
View 8 Replies
View Related
Mar 11, 2009
I'm making life difficult for myself. Summary, I have a laptop with F10 installed on a portable harddrive (sdb 1-3, i.e., no logical volume) Works great, no complaints so I guess this reduces to a grub question; how do I edit grub.conf to boot an iso on sdb4? Fedora10.iso for example.
View 1 Replies
View Related
Aug 15, 2011
I would like to understand the following:
I have a Debian installation CD that I can boot from. Now I copied that to an USB-stick using dd
dd if=/dev/sr0 of=/dev/sdc bs=1M
The CD-image should contain a boot-sector and everything else that is needed for booting, yet the USB stick does not boot.
What am I missing - why does the stick not boot?
PS: I am not interested in tips on how to create a bootable stick, I only want to understand why the above method does not work.
View 2 Replies
View Related
May 6, 2011
I've ditched ubuntu for xubuntu 11.04. I love it. The marvellous grid based desktop...the beautiful theme...the ease of customisation...everything. I switched because I didn't like unity.However, I now have a problem. After installing the proprietary ati drivers for my raedon 5xxx card, compz still does not work at all. A lot of other people have been having problems with extreme lag when dragging windows (my unity-likeing school friend included). I don't have this problem because compiz won't work. The weird thing is that in any other 3d tasks the card performs better than on 10.10. For example I can now play oblivion without the characters lacking faces.
View 6 Replies
View Related
Sep 3, 2010
I have two hard disks, the one that I work with and another one for backups. The main HD had an OS (Ubuntu) partition, a partition for /home and a lot of free space.I installed latest Mandriva creating a new partition. Everything OK. But it overwrote GRUB and I couldn't boot into Ubuntu, so I reinstalled GRUB from the Ubuntu live CD. I got my Ubuntu back, but then it wouldn't boot into Mandriva. Well, I didn't care. But now the problem comes.
Right now, if I try to install Ubuntu from live CD, the installer won't see the partitions in my main drive. It sees the partitions in the backup drive, but the main drive appears as empty, no Ubuntu, no Mandriva, and no /home. Debian testing installer did just the same. Those partitions are there and I can boot into them and see them; it's only the installer that does not see them.
View 2 Replies
View Related
Dec 8, 2010
i have ubuntu 10.04 on a partition of a drive,
i have bought a new harddrive and want to copy the content of the "ubuntu partition" to a new partition on the new drive.
can i just copy all the data and then run a live disc to make a new boot loader ?
View 9 Replies
View Related
May 12, 2011
I like to keep my pymol molecular viewer as recent as possible. With svn and compiling it used to be easy, up until ubuntu natty. Now I get the following error every time I try to compile:
layer1/Scene.c: In function SceneClick:
layer1/Scene.c:4557:11: internal compiler error: in set_jump_prob, at stmt.c:2319
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-4.5/README.Bugs> for instructions.
error: command 'gcc' failed with exit status 1
This is for EVERY version I have tried. I have even downloaded the source code you can find in the ubuntu repositories (current version for 64 bit is pymol 1.2r2) and tried to compile that one, just as prove of concept. I still get the same error. I think I might need something else beyond what I have already, because if the package maintainers could build the older version for natty, I should be too, with the proper packages, shouldn't I?
View 9 Replies
View Related
Feb 13, 2010
Iam always working from 1 machine to another even with my laptop which i dont place all my data some of which in some machine, iam always constantly saving all my files specially my MYSQL database files which have grown in size, Is there a ways I can just copy & paste my MYSQL database? like in MSACCESS.
View 4 Replies
View Related
Jul 8, 2010
I have two old windows 95 computers. The problem is I have files and programs that have specific settings that I need. The computers are old and I want to just make a copy of the hard drive and insert it into virtual box. How can I do this?
View 4 Replies
View Related
Jan 16, 2011
I have a very specific issue that I am having trouble resolving. I have an old laptop and a new laptop with a smaller HDD. I want to copy the windows partition from the new lappy to the old bigger HDD so I have room for Ubuntu. All of my files are on a Maverick install on the old lappy. How can I get all my files and windows to the old HDD and into the new laptop. I am a little stuck on this one because of my limited options.
View 8 Replies
View Related
Nov 20, 2010
I'v been trying to install Ubuntu (and actually all other dists of linux (in hope of succes), but running ubuntu on my other machines and prefer it) on my old laptop. Laptop Acer Aspire 1312XC. Have just run a 24 hour RAM test it turned out ok. Have tried with other RAM blocks in aswell. The install freezes at random points in the installation. Mainly when trying to copy files to the hard drive. The only thing i've succeded in installing was Ubuntu server and windows XP. I have tried with ACPI off and all the other special atributes. No success so far.
View 8 Replies
View Related
Sep 25, 2009
I was recently able to obtain a new laptop at work. Rather than reinstalling the OS, reconfiguring all of the software, and then copying over all of my data from my old laptop -- I decided to try to use dd to clone my drive. It worked pretty darn well (thanks Saikee!). However, I have two problems that I have noticed so far:
1) The system does not seem to offer me the option to install the proprietary nvidia driver. I was able to manually install the nvidia-glx-180 package and then edit xorg.conf appropriately and I'm running with the nvidia driver now. So this problem is resolved (though I still find it odd it didn't even offer my the "restricted hardware drivers" option in System -> Administration).
2) Wireless is not working. I checked dmesg and it doesn't seem to have any errors in it. Here is a list of things I have checked/found which I think might be relevant:
- Oddly enough it seems that my wired device always gets renamed from eth0 to eth1, and my wireless device gets renamed from wlan0 to wlan1. I'm not sure why (though I would prefer them to be eth0 and wlan0).
- dmesg output looks good shows some message about the wlan1 link not being ready
Code:
bmayes@bdmlin:~$ dmesg | grep wlan
[ 10.915831] udev: renamed network interface wlan0 to wlan1
[ 185.179556] bridge-wlan0: peer interface wlan0 not found, will wait for it to come up
[ 185.179559] bridge-wlan0: attached
[code]...
View 10 Replies
View Related
Mar 9, 2011
i've worked with Linux for a while now, but never in a double boot kind of way (except using wubi), and i'm still kind of a newby.i have 2 harddrivesfirst one has only 1 partition; Windows XPsecond one has 1 empty partition, simple storageand another partition where i installed fedora core, and GRUB is also located on this harddrive.I changed harddrive priority to my second harddrive, result:GRUB comes up, no problem, but when I try to boot windows, it tells mentldr is missing ctrl alt del to continueso i changed the harddisk priority back to the way it was, where the first drive containing windows is first priority... but then, no GRUB.i've tried editing the grub conf,i've tried fixboot/fixmbrtl;dr:no ntdlr when linux harddrive is main priorityno grub when windows harddrive is main priority
View 4 Replies
View Related
Jun 11, 2011
Back in Febuary, my wife bought a Toshiba Satilite from Wal-Mart and a few days ago the hard drive got toasted. So now I'm using an 8gig usb drive as the boot drive. I also have 2 other flash drives for downloads and such but overall I am very pleased.
I'm running 11.04 32 bit and was wandering if 64 bit made a difference. I've got 4 gigs of ddr3. It's slow to boot, but once it's running, it's faster then Windows 7. Very nice.
Is there anything I should chage, use, since I'm running it off a flash drive??
I have 3 seperat drives, 2 x 16 gigs and an 8 gig, and was wandering which one would be best for booting off of? What do I look for??
Here's what I got:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
[Code]....
View 5 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Feb 27, 2010
Ubuntu 9.10 64bit I can't find netinstall image but find minimal CD. Please advise how can I copy it to USB stick to make it boot?
View 3 Replies
View Related
Sep 19, 2010
My brother has been a long time Linux fan, and has been getting on me forever to dual-boot my computer with Linux. So I finally got around to it and dual-booted it with a partition, and it works just fine, problem is all my stuff is on the Windows 7 partition of the hard-drive. I hear the big Linux feature is being able to take everything from the Windows side of the computer and transferring it over to the Linux side...
My only question is, where would I find that feature? I browsed around the administration system capabilities but couldn't find anything related to the partition, so I could use a little guidance in finding the feature, or whether I need to download a program to use it.
View 5 Replies
View Related
Feb 6, 2011
I accidentally formatted my internal HDD and unmounted it and now my computer won't detect it as a bootable device. I have a system recovery disc but it doesn't seem to be making any difference. Also I do not have my windows 7 installation disc nor can I write discs.
Is there a way I can fix this and keep all of my important files?
View 2 Replies
View Related
Sep 1, 2010
I have a 160GB harddrive which I installed a F12, would like to upgrade to a bigger drive, but I hate to have to re-install everything.
Recommend a good disk copy utility? The utility should be able to not only copy files, but boot sector and everything. So I just need to make a copy, change my BIOS to boot from the new drive and run everything as before.
View 11 Replies
View Related
Jul 22, 2010
I just picked up a terabyte hdd, so i'd like to ghost/copy my dual boot win7/ubuntu 10.4 installation to that bigger drive, is this possible?
View 1 Replies
View Related
Aug 20, 2010
I just installed squeeze from a usb key. Installation went flawlessly but now I need the usb key to boot. Nothing happens if I let the bios boot from the HD or if I force it to do so. When it boot up from the usb key, the HD is read and the boot up sequence continues. Grub seems to be installed in /boot/grub. I imagine that I have to copy the usb key boot sector to the HD but how?
View 3 Replies
View Related
Mar 19, 2010
I am trying to boot up linux on a SATA drive. The SATA drive already had some other linux. I 'fdisk' the SATA drive and cleared all partitions. Now tried to CD boot with linux, it copied over to the SATA drive, however, when i tried to boot from harddrive, it gave me a GRUB Error 22. Why does this happen ? Shouldnt the linux have created its own partition ?
View 3 Replies
View Related
Dec 4, 2009
i want copy files in ftfs drive to ext3 drive. how am I do this?
View 2 Replies
View Related
Mar 22, 2010
I have a 120 gig drive that I'd like to clone before it fails completely. I was thinking I'd pull the drive from the server and build a separate machine that has it's own os installed and the source and destination drive. Does anyone know of any linux tools will will do a full drive copy? Additionally, If possible, I'd like to move to a larger drive. how I'd migrate the 120 drive to a 400 or so? 1 idea I have is to install os on 2 new drives to where it they will boot, Then boot with one and copy source to the newly created destination drive.
View 6 Replies
View Related
Apr 28, 2010
I was running 11.0 and it stalled in the middle of a number of updates. On reboot I now get (if I remember correctly) Error 15: File not found.I managed to get my hands on a 11.0 live cd and started trying to fix grub. However, when I try mounting the harddrive using "mount /dev/sda1" I got
Code:
can`t find sda1 in /etc/fstab or /etc/mtab
"mount /dev/sda1 /mnt" gives
[code]...
View 5 Replies
View Related
Feb 3, 2011
I have a VirtualBox 3.1.2 image of Debian 5.0.2 running on Windows XP SP3. I would like to export that Debian image to a USB harddrive such that I could boot to that drive and run it natively. Is that possible to do with a VDI?
View 1 Replies
View Related
