Ubuntu Installation :: 3d Works Perfectly, But Not Compiz?
May 6, 2011
I've ditched ubuntu for xubuntu 11.04. I love it. The marvellous grid based desktop...the beautiful theme...the ease of customisation...everything. I switched because I didn't like unity.However, I now have a problem. After installing the proprietary ati drivers for my raedon 5xxx card, compz still does not work at all. A lot of other people have been having problems with extreme lag when dragging windows (my unity-likeing school friend included). I don't have this problem because compiz won't work. The weird thing is that in any other 3d tasks the card performs better than on 10.10. For example I can now play oblivion without the characters lacking faces.
I recently installed Ubuntu 10.10 on my Sony Vaio VPCEE2E1E. I've been able to avoid any major problems, however, my onboard sound doesn't work. I've tried plugging speakers into the laptop and this works perfectly. I'm rather confused as to why the onboard sound isn't working though.
Here's the output for lspci on my machine:
Code: **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC259 Analog [ALC259 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
I have two hard disks, the one that I work with and another one for backups. The main HD had an OS (Ubuntu) partition, a partition for /home and a lot of free space.I installed latest Mandriva creating a new partition. Everything OK. But it overwrote GRUB and I couldn't boot into Ubuntu, so I reinstalled GRUB from the Ubuntu live CD. I got my Ubuntu back, but then it wouldn't boot into Mandriva. Well, I didn't care. But now the problem comes.
Right now, if I try to install Ubuntu from live CD, the installer won't see the partitions in my main drive. It sees the partitions in the backup drive, but the main drive appears as empty, no Ubuntu, no Mandriva, and no /home. Debian testing installer did just the same. Those partitions are there and I can boot into them and see them; it's only the installer that does not see them.
I tried to install ubuntu 10.04 to a 16 gig thumb drive and the installation went perfectly. However, when I removed the thumb drive and tried to boot the computer back into windows I saw that the installer had installed GRUB on to the hard drive of the computer. Windows runs fine, but it wont start with out the thumb drive that has the ubuntu install on it, this is very bad for me. Is there a way I can remove GRUB with out messing up windows on the computer? i dont have a windows 7 boot disk so this operation would need to be done either in windows (already booted) or ubuntu.
I like to keep my pymol molecular viewer as recent as possible. With svn and compiling it used to be easy, up until ubuntu natty. Now I get the following error every time I try to compile:
layer1/Scene.c: In function SceneClick: layer1/Scene.c:4557:11: internal compiler error: in set_jump_prob, at stmt.c:2319 Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.5/README.Bugs> for instructions. error: command 'gcc' failed with exit status 1
This is for EVERY version I have tried. I have even downloaded the source code you can find in the ubuntu repositories (current version for 64 bit is pymol 1.2r2) and tried to compile that one, just as prove of concept. I still get the same error. I think I might need something else beyond what I have already, because if the package maintainers could build the older version for natty, I should be too, with the proper packages, shouldn't I?
I am converting over to linux ubuntu 11.04, and I have used it for a week, love it. I installed an old 30gb HDD in order to install it ubuntu to try it out. Now I want to erase my primary windows XP drive and reformat to ext4, just like linux. Is there any prog or method that will make a perfect copy of what I have on my current drive ubuntu and put it on the newly formatted drive primary, so that it can boot ubuntu will all of the stuff I have on it right now?
I've got 9.04 and 9.10 both installed on the same machine. The /home directory is on a separate partition, so both OSes use the same /home.I can't get Compiz to work at all in 9.10, even though it's been perfectly fine in 9.04. Is there a backport of some sort that i should install?The fixes I've found all point to editing the xorg.conf file, but of course, Karmic doesn't have an xorg.conf file.I've tried reinstalling the Compiz files, reinstalled the open-source video drivers, installed/uninstalled fglrx drivers a few times, rebooted dozens of times.
I had to make for work a collectd based network monitoring system which displays data for each server in a fullscreen conky on different compiz viewports. I have to switch viewports automatically when the machine isn't operated (sorta screensaver) and also if i had to call attention in the case something bad happens, autoswitching should stop and the relevant viewport be showed up.This requires an interface to talk dynamically to the WM, which i've implemented in bash with support of the widely available "wmctrl" program.
Processor: amd phenom II 965 BE Motherboard: M4N78 PRO (Asus) newest bios Memory: Corsair 2gb DDR2 800mhz X2 (4GB) Video Card: Radeon 5750 1GB Power: 620W Corsair. HD: 320GB
I use the TV + HDMI cable. Versions tested 32BITS/64BITS (stay with x64) has no disk error. already downloaded several times. MD5 is correct well ... I'll start here with my concerns ... version 9.04 onwards does not work gives blackscreen. I think "forgotten" by the generic drivers for ATI or something that influences the video. it does not show. 9.10,10.04,10.10 none of those versions worked ... on other computers functioned normally. I found researching how to dribble and go to live. and thus unable to install. but does not work after the pc restarts. Linux does not. shows nothing ... goes to black screen with the (- FLASHING) but nothing else happens.
Can any one tell me how to configure Tomcat ldap URL authentication perfectly? I've tomcat installed with port forwarding to http(80). I could able to confiure apache ldap authentication. For this i modified the file '/etc/apache2/sites-enabled/000-defaults' with the DocumentRoot /var/www.
But for tomcat '/usr/share/tomcat/webapps' I could not able to configure 'server.xml' file perfectly.
If I click the network indicator and select Connection Information, I get a dialog that says "Error displaying connection information: No valid active connections found." If I click Edit Connections, it shows Auto eth0 as "Never used". Yet I am using my network connection right now. If I download something, I am getting full performance. I am surfing the net and posting this, now.What has happened to my connection info and how can I fix it?
I can browse smoothly without any speed problems at all but all update stuff like apt-get , software centre etc get stuck. As in they get 0kbps fr lk a long time n then move on n then agn 0kbps. Until the downlaod is done!
practically out of the box in U10.10, well modulo a little tweak to force /dev/video0 as the default webcam... (as I have a PCI capture card)...Both upgrade from 10.10 or fresh install of 11.04, in 11.04 sn9c202 fails to work on most webcam apps, apart from xawtv...
I an running a script Database backup script in my server.It is thworing error ,i have checked permissions for root@localhost , root has all privileges.
### MySQL Server Login Info ### MUSER="user" MPASS="password" MHOST="localhost"
[code]....
and it is throwing error
mysqldump: Got error: 1045: Access denied for user 'root'@'localhost' (using password: YES) when trying to connect mysqldump: Got error: 1045: Access denied for user 'root'@'localhost' (using password: YES) when trying to connect mysqldump: Got error: 1045: Access denied for user 'root'@'localhost' (using password: YES) when trying to connect mysqldump: Got error: 1045: Access denied for user 'root'@'localhost' (using password: YES) when trying to connect
I've been using Ubuntu 10.10 for a few months now (after about a 5 year hiatus from all things Linux) and when I first booted up, everything worked perfectly out of the box except audio. I have a Creative Sound Blaster Audigy 4 sound card, and after searching the forums I used [URL] to successfully get my audio working.
Now, I'd like to try Kubuntu. Like Ubuntu, when I use the live CD everything but audio works. However, I can't install gnome-alsamixer like I did to fix the sound under Ubuntu (of course, I may not have had all the repositories enabled, I didn't think of this until later). Also, KMix didn't seem to offer an option that worked.
Kubuntu's Network manager says that my (wired) network is in an invalid state because I don't have an IP address, but Firefox and Chorme work perfectly, as do Synaptic and Software Centre, and a Superkaramba network monitor says that my IP is "192.168.1.101" In fact, the only thing that isn't working is Pidgin, and it says it's "Waiting for network connection."
I have installed fedora 11 and I have installed on it hosting control paneland for a week the server was working fine for no reasonI have regulated control panel and I have added other functionswhen the hosting control panel was turned off, I have turned off the serverNext day I have turned on a server again and fedora 11 started to go onbut some window where the log in has to be does not appearinstead that window I saw a black screen with the cursorand around the cursor the revolving thingI have tried for several times to load it- it does not workWhat can it be and how can that be fixed
The PC is a Toshiba laptop model# x205-s9359 running 11.2, KDE 4.3.5. Its video card is an nVidia 8700 GT. For two years now I've been plagued by random flashes, flickers and even missing scan lines on my screen when I use the nVidia drivers (up to and including 195.36.15), so lately I've been using the nv drivers. I miss the effects, etc. but I can live with that. At least I can get my work done, even if the display isn't as fancy as I'd like.
- When I run the nv drivers I can't suspend the PC to RAM or Disk. This means a lot of wasted time waiting for the machine to shut down and reboot every time I leave my desk for any length of time. If I try to suspend to RAM the only thing that happens is that the network connection disconnects then reconnects immediately. Here's the log file.... - If I try to suspend to Disk the PC appears to suspend as expected, but when it resumes it hangs before restarting X, and there's no keyboard or power button response. I have to use alt-prtsc-reisub to reboot. When the reboot is complete the screen shows all the windows, etc that were present before the suspend. Here's that log file.... -When I run the nVidia drivers the suspend/resume functions work perfectly, but I have to put up with all the problems described above. Here's the log file for Suspend to RAM with nVidia, and here's the one for Suspend to Disk.
I've spent hours searching for clues in these forums, on the openSUSE.org site in general, at KDE.org and with Google and I'm sorry to say that most of I've found is horribly out of date, and/or it's way over my head. or (worst of all) not even dated, so I've no idea whether it's current info relevant to my situation or so out of date that I might do real harm if I were to trust it. (RANT: Is it too hard to put a date on an article?... end of RANT) I'd be quite content to use the nv drivers if I could solve the power management issues, but I'd be equally happy to solve the flickering etc. with nVidia drivers.
I now have a firewall up and running: almost perfectly. When I use nmap and perform the most comprehensive scan I can think of, it cannot detect any wide open ports (unless bittorent is running) and cannot fingerprint the OS. My last 2 questions about my firewall (I am very happy now) are:
It seems as though Firestarter has been "abandoned" by the developers, and that gufw is more current. Does it really matter which firewall I use because don't they all do the same thing? I like firestarters system tray icon a lot. 2nd question is I have two open|filtered ports. Are these still pretty well protected?
It is very pleasing to see that I have no open ports, because if you were an experienced Windows user like I was, you got used to the fact you were going to have open ports no matter what. Linux's builtin firewall completely destroys the expensive and useless scams they call Norton and McAfee. Linux officially rocks now
I installed (Synaptic) Compiz and tried a few 3-D desktop teaks and it froze everything.Now my system boots to desktop and then everything Freezes.NO touch-pad, mouse or keyboard function.Tried to boot an earlier version in the GRUB, still nothing.Tried a Install of 9.10 in the same /sda3 as the frozen one and still no change.Cannot start a terminal.Cannot start, remove or change anything.I'm using my Backup 9.04 on my /sda1 to get here.Is there a way to get into the Frozen O.S. and remove Compiz?
As the title said, my compiz effects are sometimes blinking, like when i rotate my cool cube it suddendly for some miliseconds it becomes transparent or something like that, and looks very ugly and very annoying, cuz it's very quick and looks so not smooth and clean. I've upgraded from 10.04 to 10.10 . I didn't had any problems like this. I also use emerald.
As said here: [URl] I want the sphere deformation, but that needs the PPA apparently (I can't find it anywhere in the default compiz Ubuntu 10.10 ships with.) Compiz starts, but it says it can't load plugin 'decoration.'
I installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.
I removed compiz from synaptic and also metacity. now ubuntu boots but only in terminal mode. i tried to re install both synaptic and metacity from the terminal but i have no internet connection via the terminal, how should i connect? i am also trying to use the ubuntu 9.10 cd to repair my ubuntu but i don't know how.
So after I upgraded to 10.10 some of my compiz plugins stopped working. Atlantis and anaglyph give me an error like this when I enable them in CCSM (I ran compiz from a terminal to see the output):
Compiz stopped working entirely recently and I've been trying to reinstall different version, nothing helped. Now when I look at synaptics, the version of the different package (compiz, ccsm, bcop...) are of different version (from 8.2 to 8.6). It tried reinstalling only from synaptics and it didn't change anything. I'm not sure that'll fix my problem, but for sure it doesn't help. Does anybody know what repos i should use to get a clear installation?
All ive had since i upgraded from 10.10 to 11.04 s problems. After i upgraded and rebooted my machine, i logged in and the desktop would not load. Ive managed to sort that out but i cannot get compiz and emerald to work! I had it working perfectly before i upgraded
When i open compiz-fusion icon in the bar and change the desktop to compiz and emerald, the buttons on top of the window disappear and i cant do anything unless i change it back.
