I have been using ubuntu 10.04 through wubi installation and would like to now convert it to a dedicated partition .
On searching I found LVPM does that. It converts the wubi install to a dedicated partition including all the softwares and settings.
Unfortunately it doesn't support ubuntu 10.04 currently .
Can anyone suggest any alternate way to achieve the same or a patch for LVPM .
I installed ubuntu 10.10 using wubi installer, on win 7 64 bit system. how can I migrate from wubi install to standard install. I want to get rid of issues like free disk space and suspend/hibernate not supported in wubi ubuntu. Will LVPM help. I saw on the page it says that it does not supports wubi 10.04. Not sure what version I have, just installed the latest from ubuntu's site.
View 9 Replies View RelatedI tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
I've tried to install Ubuntu 9.04 last year but my modem was malfunctioning, so i gave up on Ubuntu, but i got a new modem and installed Ubuntu using wubi, i loved it and ill make it my main OS, but now i have 2 problems:
1.-I tried using lvpm, but i ended up with a 60 GB new.disk and my hard drive has just 30 Gb (30 gb wubi installation and the 60gb from the new.disk)
2.-i dont know how to shrink windows partition and i dont want to loose my config, tweaks and installed apps my hard drive has 230 gb capacity and i want to leave at least 100 gb to windows
I decided to uninstal wubi and im going to install ubuntu the right way.. it just seems easier..
I installed Ubuntu using wubi, But I didnt assign much space, probably like 17 gigs or something. My geting a pop up everytime my ubuntu starts up saying i got low disk space, very low disk space, Im runing ubuntu 10.10. How do I add more disk space? How do i make the partition bigger.
View 6 Replies View RelatedI installed Ubuntu 10.04 with WUBI. In the setup wizard in windows, I selected the D partition to install Ubuntu on. It extracted the files, and after a reboot, and selecting Ubuntu, the Ubuntu setup wizzard appeared. After it was done, it rebooted. I selected Ubuntu, and this appeared on my screen:
Code:
booting from (hd0,0)...
And there it stucks! I tried editing C:oot.ini, to let it select the ubuntu files.
My original boot.ini file:
Code:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS
[Code].....
I have very little space on my system partition (C:) So, I installed it on D:. I'm using Windows XP Professional SP2.
My wubi installation works perfectly but since i cannot restart my netbook i cannot get to use it. however, i am a bioinformatician and for that type of work, i need linux.
migrating my ubuntu wubi install to a different partition on my hdd, from within windows (without restart) in order for me to mount that partition using vmware player and booting up ubuntu from windows. (and to possibly be able to do that from ubuntu as well later.)
so i need to move this wubi install.
I am used to old school move files and edit boot ini and such if there is no automatic way of doing this from within windows.
I've been using Ubuntu NR 10.04 LTS for almost 1 years now with dual-boot with Windows XP by Wubi and I had great time using it. Now I want to experience the full potential of Ubuntu by creating another partition just for Ubuntu alone since I heard Wubi makes a lot of trouble and works slower than independent Ubuntu install.
Here's my question. Should I really create another partition to get full potential of Ubuntu or should I stick with wubi? I haven't got any problem running Ubuntu with Wubi but my video playback sometimes gone haywire which didn't happen in windows especially .mkv files
If I should create a partition, how do I want to shrink Drive C: to get enough free space for another partition? Mine was Windows XP so it doesn't have shrink option in Disk Managament unlike Vista/7.
And last question... Can Ubuntu run Window games or MMORPG smoothly like Counter Strike and WarcraftIII? I did try to play it before but it run too slower in Ubuntu. I used Netbook Eee PC 900HA, 2GB RAM, dual-boot Windows XP Home Edition with Ubuntu Netbook Remix 10.04 Lucid Lnyx LTS.
I am running Ubuntu in WUBI inside Windows, my first question is, can you do a full install to a new partition through the WUBI installation? Or would it be better to partition the disk, and just install Ubuntu, then deal with the MBR issue (been a while since I had a normal install, maybe the boot problems are gone?)? And is there any actual advantage to doing a stand alone install, while still dual booting Windows? Is there any gain from it versus the WUBI install I am running now?
View 3 Replies View RelatedI have a Wubi install of 10.04 in my C: partition. I had given it 20GB of space but over the months my C: has become almost full, so I need to move the Wubi install to another partition (say E. I looked around for instructions on how to do it, but I could only find instructions for grub-legacy (that ask you to modify C:/ubuntu/disks/boot/grub/menu.lst) and not grub2 (which doesn't have menu.lst) used by 10.04.
how to move a 10.04 Wubi install to another partition in Windows is appreciated. Kindly note that I'm not trying to remove Wubi and convert it to an actual installation, but rather simply move it to a different location in Windows.
I have been using Lucid Lynx for almost 2 weeks and have got everything working, thanks to the "ubuntu" spirit in this forum. Now I am ready to upgrade my Wubi install to its separate partition. I have searched the forum and googled to find a way to do this, but I am still stuck.
I used lvpm (despite knowing that there is no confirmation of its working on Lucid Lynx), it didn't work. The installation happened alright but it wasn't able to show up the login screen (GDM?). It was stuck around the screen before that (Xsplash?).
There is this thread http://ubuntuforums.org/showthread.php?t=438591 that explains this process very well but remains silent on Lucid Lynx version.
I am sure there must be many other first timers who wanted to get their feet wet the easy way using wubi and would like to make it "permament" OS on their computers.
Is there anyone who can suggest if :
1. There is any way I can still use lvpm to transfer wubi install to separate installation (Ubuntu 10.04 release) ?
2. Any other way I can do this ??
After clicking on wubi.exe nothing happens. Wubi does not start at all.Windows XP, SP3.
View 9 Replies View RelatedAround 2008 i seem to remember PartEd on the command-line was able to rescue deleted partitions and gave a choice of whether to recover the partition as a Primary or Logical Partition. I have tried testdisk but didn't really grok what i was doing. I successfully moved a "Windows Recovery" partition to the end of my hard-drive, immediately after the drive's Extended Partition.
View 3 Replies View RelatedFedora 14 xfce
I have the following partition setup. I would like to know how can I convert the logical partition sda6 to a primary partition.
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
I would like to convert sda6 to a primary partition, the reason for this it to install windows 7 starter.
Using Ubuntu 10.04 with a Wubi Install. Vista Home Premium is the host. I can access all my partitions and external drives with the exception of my windows partition where Wubi is installed. I have seen some suggestion to go to "places" and click on "host", but there is no "host" listed. My windows install is on sda1 and I believe I need to create a directory for it and then execute a command in the terminal but I have no idea if this correct or what really needs to be done. mount my NTFS windows partition while I am running Ubuntu 10.04 in Wubi.
View 9 Replies View RelatedI installed Ubuntu a few days ago from WUBI, but now I want to make it take the whole partition and I don't want to lose any files and software I have downloaded (Synaptec/Software Manager ) How can I do that ?
View 7 Replies View RelatedI have been using wubi for more than half an year. Now I want to move this wubi to local partition (normal ubuntu install). What is the best way to do it? It should be working parallel with windows 7 which i have already.
Is it possible to let windows control the booting, even after installing ubuntu?
I was just curious how many people have succeeded getting a triple boot from simple running boot camp on OS X and install windows 7. Then going to windows 7 partition and running wubi.[URL]... I have a brand new macbook air (one of the ones that just came out) and I'm tempted to try this, but if it doesn't work, then I will sit on my hands a little longer before I try to get the ubuntu on my mba. Anyway, anyone tried this? Especially with a new macbook air?
View 1 Replies View RelatedI've installed wubi on my D: partition of a vista os. Vista is installed on the C: I can see the vista partition if I mount it but can only see the wubi 10.04 system files on the data partition (D: ). No option to mount it either. Also curious to know if its possible to automatically mount the c: on startup.
View 3 Replies View RelatedI installed ubuntu under windows. i reinstalled windows, though the linux partition is intact. howcan i reuse them without losing data ?
View 1 Replies View RelatedThis is my partition table....(in the image) Now I would like to install windows in the unpartitioned space after a long time..... I tried but could not do that. I understood that Windows needs only primary partitions!
So I tried to convert this logical one into primary, but of no use... Is it possible to convert that unpartitioned space which is under logical drive to a primary one!
I'm trying to convert big ext4 partition to logical. I was able to do that with Arconis Disk Director Home 11 with swap and ext3 partition, but it doesn't recognize ext4.
Unfortunately I can't copy 2TB data to another HD Now I have:
Pri /boot ext3
Log / ext3
Log swap swap
Pri /media/X ext4 <- 2TB
When I do that I be able to install Ubuntu Server next to CentOS. And I will add partition /home(ext4) for both and "/"(ext4) for Ubuntu.
Problem:Here's what I had, they basically needed to switch places.C: Windows Primary (The contents of this was my boot partition)D: Extended Logical (I wanted this to become the primary)I googled what to do, and believe it or not it seems people really didn't have a solution besides reformatting it?We learn from our mistakes. That's why I'm posting what I did to see if someone knows a better way!What I did:First I used an Ubuntu LiveCD or 10.04. (Not .1 oh noes)Then I opened up gparted and shrank the extended partition so I would have enough room to move them around.I mounted both the C: and D: partitions and copied the data over to the primary from the logical.I deleted the logical and then moved and resized the primary!Then I flagged the primary partition boot.Well that's one way to get from logical to primary with your data
View 2 Replies View RelatedI wanted to install ubuntu via wubi, but i had to format my partitions (can't do it on wubi ) so i used a crappy program(i don't remember the name) to get rid of Backtrack4 , because i wanted windows kept for my mom.So, that was the sorry, i've ended up with a GRUB error 22, and a Backtrack4 CD stuck in my DVD-rom.So my question is: Can somewone tell me how to fix error 22? (i've seen some methods online, but i obviously can't put a Windows CD in my DVD rom because the Backtrack4 DVD is stuck in there.
View 4 Replies View RelatedSo yeah I want to transfer my system to the real Ubuntu. Problem is I can't boot into my Wubi Ubuntu cause I lost boot.
View 5 Replies View RelatedI've removed all the data I need from my windows partition (accessible via Linux SUSE's ability to see my windows drive) and would like to free up some space by essentially deleting the windows drive and adding that memory to my linux drive so I've more room to play with.
View 4 Replies View RelatedI think I basically need to know whether it's possible to copy a partition whilst converting inode size, or if I need to create a new partition and copy the contents.
To give you the back story..
I have a system with 1 SSD and a raid array of 4 physical disks. One of the raid disks died, so I swapped it out, only to find the system wouldn't boot (had no bootloader?). I fired up a live session, and tried grub-install, but get an error like "The file /boot/grub/stage1 not read correctly". Looking into it, it looks like the problem discussed here which is basically something to do with the partition having an inode size of 256 instead of 128.
Taking a step back for a moment.. I can't really remember installing this system, but is it possible I partitioned the SSD to ext4, with a default inode size of 256, then when the installer tried to install grub, it basically refused to install it on the SSD, so offered to install it on one of the raid disks, which happens to be the disk that died? So until now, unbeknown to me, the bootloader has been on one of my raid disks, while the root (bootable?) partition is on the SSD. That's my best guess as to what's gone wrong anyway..
Anyhow, currently this system has the SSD with the small bootable partition with an inode size of 256. As luck would have it, the new raid disk is sitting there not doing anything yet, so I have the space needed to copy that partition or it's contents onto the new raid disk.
So the question is, can I convert the inode size whilst copying the partition? Or do I need to just clone the partition, then create a new one with the correct inode size, then copy the contents of the old partition to the new one? In the latter case, is there any hidden secret sauce that won't be copied with `cp -R` or so? I mean, if I just create a partition with the correct inode size, and flag it bootable, then `cp -R` from the old partition to this new one, will it be functionally the same? or is there something special I need to do because this is the root OS partition?
I'm trying to convert big ext4 partition to logical. I was able to do that with Arconis Disk Director Home 11 with swap and ext3 partition, but it doesn't recognize ext4.
Unfortunately I can't copy 2TB data to another HD Now I have:
Pri /boot ext3
Log / ext3
Log swap swap
Pri /media/X ext4 <- 2TB
I have a usb flash drive and according to sources I found out after the fact that I should have used ext2 instead of ext4 due to the extra write operations.
Is it possible to convert the ext4 root partition to ext2 or do I need to backup, reformat, and restore?
i just tried to install Ubuntu 11.04 (x86) on my Dell Inspiron 1520 Laptop (with a Nvidia 8600M GT graphics card) with Wubi. A normal installation try resulted in an unreadable screen after boot (see attachment). I then managed to get the installation going by modifiing the boot options like shown in this HowTo: [URL] After the installation Wubi automatically rebooted the system without any prompt, so that i couldn't install the proper Nvidia drivers (is there a way to prevent wubi from doing that?) like described in the HowTo. After the reboot the graphics were messed up again.
Boot parameters like "text" "single" or vga=xxx didn't work, adding nomodest and nouveau.modset again didn't help either (I think "text" acutally brings up the console, but i just see an unreadable "blacker" screen than normal). Is there an boot option for grub to disable all nvidia related drivers and the graphical login manager and just show a text based console? Or force the gfx driver to be the same as in the installation process (which was perfect...native resolution, no graphical errors until the reboot) (i tried xforcevesa without any luck; nosplash and removing quiet/splash does work - the bootup process is readable, but as soon as the login manager starts its messed up again)