Ubuntu Installation :: Moving Wubi To Partition ?
Jul 30, 2010
I've tried to install Ubuntu 9.04 last year but my modem was malfunctioning, so i gave up on Ubuntu, but i got a new modem and installed Ubuntu using wubi, i loved it and ill make it my main OS, but now i have 2 problems:
1.-I tried using lvpm, but i ended up with a 60 GB new.disk and my hard drive has just 30 Gb (30 gb wubi installation and the 60gb from the new.disk)
2.-i dont know how to shrink windows partition and i dont want to loose my config, tweaks and installed apps my hard drive has 230 gb capacity and i want to leave at least 100 gb to windows
I decided to uninstal wubi and im going to install ubuntu the right way.. it just seems easier..
View 2 Replies
ADVERTISEMENT
Mar 31, 2011
I have been using wubi for more than half an year. Now I want to move this wubi to local partition (normal ubuntu install). What is the best way to do it? It should be working parallel with windows 7 which i have already.
Is it possible to let windows control the booting, even after installing ubuntu?
View 4 Replies
View Related
Aug 23, 2011
I am using ubuntu with wubi right now and after a while I am thinking about creating a separate partition for ubuntu and installing ubuntu on it. But I was wondering how can I transfer my files and apps form wubi to the ubuntu installed on the partition? I don't want to install all the apps again and tweaks etc....
View 1 Replies
View Related
May 19, 2010
Will the LVPM utility move Wubi 10.04 onto a dedicated partition?
[URL]
The website hasn't been updated since 8.04.
If not, is there a resource that will assist me in moving my data, settings, keyring (and programs if possible) from the Wubi install to a clean install on a new partition?
I'm planning for a transition from Lucid 10.04 Wubi to a dedicated partition for Lucid Studio 10.04, but have been using Wubi for emails, XAMPP web development, etc.
View 2 Replies
View Related
Aug 1, 2011
I tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
View 3 Replies
View Related
Dec 9, 2010
I work with ubuntu 10.10 64 bit on a hp pavilion 2713ca laptop. Everything is fine presently, except for the fact that I will be soon out of space on the actual sda6 partition (only 2 gig left).
I would like to move the ubuntu partition with all its content to a second one where there is a lot of space, that is sda2. So my question would be twofold.
1) What software can I use to do that (gparted, clonezilla, ... ) and is someone is familiar with the procedure?
2) Will there be an easy way to change the grub.cfg file? (for example, will the command grub update be enough to boot to new setup)
View 1 Replies
View Related
Aug 26, 2010
I have been using ubuntu 10.04 through wubi installation and would like to now convert it to a dedicated partition .
On searching I found LVPM does that. It converts the wubi install to a dedicated partition including all the softwares and settings.
Unfortunately it doesn't support ubuntu 10.04 currently .
Can anyone suggest any alternate way to achieve the same or a patch for LVPM .
View 1 Replies
View Related
Nov 6, 2010
I installed Ubuntu using wubi, But I didnt assign much space, probably like 17 gigs or something. My geting a pop up everytime my ubuntu starts up saying i got low disk space, very low disk space, Im runing ubuntu 10.10. How do I add more disk space? How do i make the partition bigger.
View 6 Replies
View Related
Jun 13, 2010
I installed Ubuntu 10.04 with WUBI. In the setup wizard in windows, I selected the D partition to install Ubuntu on. It extracted the files, and after a reboot, and selecting Ubuntu, the Ubuntu setup wizzard appeared. After it was done, it rebooted. I selected Ubuntu, and this appeared on my screen:
Code:
booting from (hd0,0)...
And there it stucks! I tried editing C:oot.ini, to let it select the ubuntu files.
My original boot.ini file:
Code:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS
[Code].....
I have very little space on my system partition (C:) So, I installed it on D:. I'm using Windows XP Professional SP2.
View 4 Replies
View Related
Sep 22, 2010
My wubi installation works perfectly but since i cannot restart my netbook i cannot get to use it. however, i am a bioinformatician and for that type of work, i need linux.
migrating my ubuntu wubi install to a different partition on my hdd, from within windows (without restart) in order for me to mount that partition using vmware player and booting up ubuntu from windows. (and to possibly be able to do that from ubuntu as well later.)
so i need to move this wubi install.
I am used to old school move files and edit boot ini and such if there is no automatic way of doing this from within windows.
View 1 Replies
View Related
May 25, 2011
I've been using Ubuntu NR 10.04 LTS for almost 1 years now with dual-boot with Windows XP by Wubi and I had great time using it. Now I want to experience the full potential of Ubuntu by creating another partition just for Ubuntu alone since I heard Wubi makes a lot of trouble and works slower than independent Ubuntu install.
Here's my question. Should I really create another partition to get full potential of Ubuntu or should I stick with wubi? I haven't got any problem running Ubuntu with Wubi but my video playback sometimes gone haywire which didn't happen in windows especially .mkv files
If I should create a partition, how do I want to shrink Drive C: to get enough free space for another partition? Mine was Windows XP so it doesn't have shrink option in Disk Managament unlike Vista/7.
And last question... Can Ubuntu run Window games or MMORPG smoothly like Counter Strike and WarcraftIII? I did try to play it before but it run too slower in Ubuntu. I used Netbook Eee PC 900HA, 2GB RAM, dual-boot Windows XP Home Edition with Ubuntu Netbook Remix 10.04 Lucid Lnyx LTS.
View 1 Replies
View Related
Jul 9, 2011
I am running Ubuntu in WUBI inside Windows, my first question is, can you do a full install to a new partition through the WUBI installation? Or would it be better to partition the disk, and just install Ubuntu, then deal with the MBR issue (been a while since I had a normal install, maybe the boot problems are gone?)? And is there any actual advantage to doing a stand alone install, while still dual booting Windows? Is there any gain from it versus the WUBI install I am running now?
View 3 Replies
View Related
Jul 27, 2010
I have on sda1 Windows 7 installed. On sda2 I have 3 sub partitions (extended partition) with Ubuntu 10.04 and a swap space and one partition for /usr/local. Now I tried to move space from sda2 to sda1 using gparted. It's not possible. I deallocated space from sda2 which works. But I cannot merge it with sda2. Is that, because sda2 is an extended partition? Is there a work around without killing all partitions and lose my complete data?
View 4 Replies
View Related
Oct 31, 2010
I've installed Windows 7 + XP + Ubuntu 10.10 and Mac Os X on my PC. The problem is that XP wont boot. I've tried a lot of fixes for the last 2 days but still nothing. So I've come to conclusion that it might be probably due to its partition (dev/sda being inside of another Extended partition (dev/sda3) as you guys can see on the attachment. If so, how can I move it out of the extended partition.
View 9 Replies
View Related
Dec 9, 2010
I have a Wubi install of 10.04 in my C: partition. I had given it 20GB of space but over the months my C: has become almost full, so I need to move the Wubi install to another partition (say E. I looked around for instructions on how to do it, but I could only find instructions for grub-legacy (that ask you to modify C:/ubuntu/disks/boot/grub/menu.lst) and not grub2 (which doesn't have menu.lst) used by 10.04.
how to move a 10.04 Wubi install to another partition in Windows is appreciated. Kindly note that I'm not trying to remove Wubi and convert it to an actual installation, but rather simply move it to a different location in Windows.
View 8 Replies
View Related
Jun 4, 2010
I have been using Lucid Lynx for almost 2 weeks and have got everything working, thanks to the "ubuntu" spirit in this forum. Now I am ready to upgrade my Wubi install to its separate partition. I have searched the forum and googled to find a way to do this, but I am still stuck.
I used lvpm (despite knowing that there is no confirmation of its working on Lucid Lynx), it didn't work. The installation happened alright but it wasn't able to show up the login screen (GDM?). It was stuck around the screen before that (Xsplash?).
There is this thread http://ubuntuforums.org/showthread.php?t=438591 that explains this process very well but remains silent on Lucid Lynx version.
I am sure there must be many other first timers who wanted to get their feet wet the easy way using wubi and would like to make it "permament" OS on their computers.
Is there anyone who can suggest if :
1. There is any way I can still use lvpm to transfer wubi install to separate installation (Ubuntu 10.04 release) ?
2. Any other way I can do this ??
View 9 Replies
View Related
Apr 23, 2009
Trying to dual-boot OpenSolaris and FC10 is difficult because Solaris grub doesn't know about ext3 and Fedora grub doesn't know about ZFS. I was able to rescue my FC10 installation by creating a new FAT16 partition and restoring /boot to it from a dump, and then doing a grub setup to it. A complication is that anaconda doesn't seem to be able to find /dev/md0 (both the Solaris and FC10 installs use mirrored disks).
This process moved the FC10 ext3 partition from /dev/sda3 to /dev/sda4, but the other half of the mirror is still /dev/sdb3.
When I boot FC10 I get a "can't load image" error from grub, but it still loads FC10 successfully. It makes no difference if menu.1st/grub.conf has "root (hd0,1)" (the FAT16 partition) or "root (hd0,3)" (the FC10 ext3 partition).
If a future yum update were to try to install a new kernel, my FAT16 partition would not be updated. It seems to me both these problems might be solved if I could move /boot from /dev/md0 to /dev/sda2 (/dev/sda2 is the FAT16 partition).
Rather than go through yet another install, would the following work?
from FC10, move /boot to (say) /boot.0
mkdir /boot
edit fstab to include "mount /dev/sda2 /boot"
If I try this and it doesn't work, I can't see any way to undo it since anaconda doesn't seem to be able to mount /dev/md0. If a grub guru sees this, perhaps they could suggest a better alternative, or if not, whether this will work or not.
Additionally, although there are two alternatives in menu.1st/grub.conf, grub doesn't display a menu - it goes directly to boot. Any idea why? I suppose this might be a Solaris stage1 grub problem...
Since FAT16 doesn't support links, it isn't possible to link grub.conf to menu.1st. Are they both required?
View 2 Replies
View Related
May 1, 2010
I have an obsession of packing a large number of distros into one hard disk. Many distro installers do not like it even though their kernels can support higher number partitions. Typically an installer, say from a Debian family, would freeze when checking a hard disk that has more than 15 partitions. However if I put the same distro on a hard disk with less than 16 partition the installer will be very happy to install. I then copy the distro back to the original disk to a different partition, change the boot loader setting and fstab and the new distro will be happily working in the next hard disk that has 57 partitions.
This scheme works for any distro until recently Fedora refuses the move. I didn't investigate the cause then but I have just come up against a brick wall with the Red Hat Enterrise Linux 6. It was one out of the 4 I just moved. The others are operating happily. The RHEL will boot to a Grub screen. When I select the user account and type in the password it just refreshes the screen as though the password could not be accepted. I can boot up another Linux, mount the RHEL partition, change root to it and change my normal user password. Better still why don't I create a new user and another password.
Same result. I could not pass the log in screen with revised password or from a new account which got displayed. How about a little trick told by Justlinux library file --> to alter the run level. So I mounted the RHEL partition, changed root to it, edited the /etc/inittab and amended the run level from 5 (for X desktop) to 1 (single user - terminal mode). RHEL now boots to a root terminal! Success in a sense that my RHEL boots as expected and there was never a problem with booting. However newer Linux do not permit root log on to the desktop so I cannot check the log in with the ordinary user account to X. After I fiddled with the various files/parameters related to the gdm and X still no joy so I cut my loss and post the question here.
View 10 Replies
View Related
Jan 1, 2010
Currently, my disk layout is: 20GB(windows-ntfs) / 250GB data-ext4 / 20GB ubuntu-ext4 / 4gb swap
Since I no longer use windows, I want to move ubuntu to the first place.
What do I need to change in configuration files, grub and anywhere else?
Shoudl I keep swap where it is or move it, too?
View 9 Replies
View Related
Nov 12, 2010
After clicking on wubi.exe nothing happens. Wubi does not start at all.Windows XP, SP3.
View 9 Replies
View Related
Apr 23, 2010
I know there is a lot of tutorials about this but I`m kind a new in Ubuntu and Linux. I know that it is good to set different partition for /home. But when I installed my ubuntu 9.10 I made 4 partitions
swap
/boot
/ - 40GB
/usr - 200GB
[Code]...
View 2 Replies
View Related
Jun 17, 2010
right now i m using ubuntu 10.04 installed on virtual hard disk (wubi), but now i want to move it to dedicated hard drive partition. i found is to use LVPM however that software is NOT compatible with ubuntu 10.04. . .
View 3 Replies
View Related
Apr 4, 2011
I have a laptop with a large harddrive. Originally I had the sda1 which was a dell recovery partition, sda2 which is my Win7 partition. I created a new primary partition to try out ubuntu. Falling in love with the OS, I wished to grow the partition but I already had 4 primary partitions.
I deleted my swap partition and converted that to an extended partition, I then grew it to a 100gb extended partition. I created 2 new primary partitions, one for swap and one for the OS..
So my drives are as follows:
This is what I have done thus far:
1. Booted to live CD
2. Mounted /dev/sda4 and /dev/sda6
3. cp -afvR /oldOSPartition /newOSPartition
4. In the NEW OS partition, I updated /etc/fstab to reflect the UUID's of the new disks.
5. I updated /etc/mtools.conf and /etc/mtab as well.
6. I rebooted to old OS partition and ran update-grub && update-grub2
7. I can see the new entries in the grub boot menu
8. I select the kernel entry for /dev/sda6 (NEW OS), it boots, but when I hit the desktop, I open an terminal and do a "mount" and I am somehow still mounted/booted to sda4 (old OS).
From here, I re-mounted /dev/sda6 to a temporary mount point and did a "cd /; grep -r 'sda4' * > /matches.txt"
I also searched for the UUID and I found no matches so I don't know why it reverted to sda4.
Even if I boot to the recovery console entry for /dev/sda6 in the grub menu, same thing, it keeps mounting sda4.
View 9 Replies
View Related
Jun 12, 2011
i am going to be upgrading to a ssd and would like to move /var and /tmp to a separate partition (it can be separate but preferably the same) how would i extract /var and /tmp to a different partition (need fstab lines and permission settings) when i get another stick of ram i will make /tmp into a ram disk here is my partition layout
View 3 Replies
View Related
May 25, 2010
Using Ubuntu 10.04 with a Wubi Install. Vista Home Premium is the host. I can access all my partitions and external drives with the exception of my windows partition where Wubi is installed. I have seen some suggestion to go to "places" and click on "host", but there is no "host" listed. My windows install is on sda1 and I believe I need to create a directory for it and then execute a command in the terminal but I have no idea if this correct or what really needs to be done. mount my NTFS windows partition while I am running Ubuntu 10.04 in Wubi.
View 9 Replies
View Related
Aug 19, 2010
I installed Ubuntu a few days ago from WUBI, but now I want to make it take the whole partition and I don't want to lose any files and software I have downloaded (Synaptec/Software Manager ) How can I do that ?
View 7 Replies
View Related
Aug 1, 2011
I was just curious how many people have succeeded getting a triple boot from simple running boot camp on OS X and install windows 7. Then going to windows 7 partition and running wubi.[URL]... I have a brand new macbook air (one of the ones that just came out) and I'm tempted to try this, but if it doesn't work, then I will sit on my hands a little longer before I try to get the ubuntu on my mba. Anyway, anyone tried this? Especially with a new macbook air?
View 1 Replies
View Related
Jul 16, 2010
I am trying to move my home directory from my install partition to a new partition. I cloned my installation from a previous ~78 gb HD using g4l to a new 250 GB drive. Now that I am using the new drive i created a new partition to used for files called "files". New partition is sda3 and the boot partition is sd1. I am trying to follow this guide [URL] but I am having no success.
The output of:
Code:
find . -depth -print0 | cpio --null --sparse -pvd /media/sda3
is
Code:
pio: /dev/sda3//./.jungledisk/cache/jd2-a114b643324c576f1c36e3f17a9043f4-us/Files/cf-1381.tmp: Cannot open: Not a directory
cpio: `/dev/sda3' exists but is not a directory
cpio: /dev/sda3//./.jungledisk/cache/jd2-a114b643324c576f1c36e3f17a9043f4-us/Files/cf-1336.tmp: Cannot open: Not a directory
cpio: `/dev/sda3' exists but is not a directory
cpio: /dev/sda3//./.jungledisk/cache/jd2-a114b643324c576f1c36e3f17a9043f4-us/Files/cf-1387.tmp: Cannot open: Not a directory
cpio: `/dev/sda3' exists but is not a directory .....
View 6 Replies
View Related
Feb 28, 2011
So I was moving and resizing a ntfs partition and i just touched gparted window and it crashed!! it was about 66% of finishing the operation... Now i guess i have a big mess in my hard drive and i dont know how to start solving it! i am in a ubuntu live cd?
If i open gparted now it shows the same partition table than before resizing and moving.. so i guess now part of my data is in this unallocated space after the sda5 partition.
View 6 Replies
View Related
Mar 2, 2011
Using gparted as shown on the partitions in the image:
sda1 is Windows 7
sda2 is swap
sda3 is root
sda4 is home
I'd like to move sda4 to the end of the drive, thus shrinking it by 20GB, and shunt every other partition along to make an extra 20GB for sda1 at the start of the drive, and expand this partition into the 20GB of space I created.
When I start moving and shrinking sda4 (before I apply and execute the command) I get a warning saying that it is very dangerous to move a boot partition and it could render my system unbootable etc etc.
How safe is it to do this? If I bork it, can I recover easily?
I assume the error has something to do with start/end disk sectors in the grub2 list (however this works these days). In short, messages like this do what they should and scare me just enough to seek assistance from this wonderful online community!
View 6 Replies
View Related
