Ubuntu :: Setup A Default OS With Dual Boot?
May 10, 2010
I recently installed Ubuntu and I am dual booting it with Windows 7. I showed it to my friend and he likes it. He wants me to dual boot his computer with Ubuntu, also.We were wondering if there was a way to configure GRUB and that stuff so that it doesn't go to the GRUB boot screen when you start your computer where you pick an OS. We were wondering if you could set a default OS that the computer automatically booted to, unless you press a button at startup, and then you could get to GRUB to pick a different OS.
The reason being is because his whole family uses the computer, and we don't want to confuse them with GRUB every time they start up the computer. We just want the computer to boot to Win7 by default, but being able to boot into Ubuntu if you press a button to get to GRUB when booting.
View 3 Replies
ADVERTISEMENT
Aug 9, 2010
My comp came with Vista and then I installed Ubuntu, so it's dual boot. When I start up the computer, it eventually opens a screen with the options to boot Ubuntu, Vista and 3 other partitions. Ubuntu is at the top, Vista at the bottom, and it gives you five seconds to pick an OS or it automatically starts Ubuntu. This is very annoying because I almost always need Vista and I have a habit of pressing power and walking away and letting the computer load. Is there a way to have Vista be the default selection?
View 1 Replies
View Related
Jul 29, 2011
I installed Ubuntu 11.04 side by XP pro. When systems boots up it goes to a screen listing 5 choices to boot into. Ubuntu first and XP pro last. I set the delay start time to 30 sec. and the XP pro as the default OS using the start up manager. THe default delay works and waits for a key press, but the order of the list has not changed and the highlighted OS (ubuntu) is what starts if no key is pressed. How can I fix this?
View 5 Replies
View Related
Jan 8, 2010
how to set up a dual boot. I know that I have to partition the drive but at the moment Ubuntu is taking up the whole drive, so would i still be able to partition without loosing anything?
View 6 Replies
View Related
May 7, 2010
I am now dual booting between Windows 7 and Ubuntu 10.04 When i turn on my computer it goes to a GNU Grub screen where i can choose an OS to boot, in 6 seconds it auto chooses default. How to i change the default from Ubuntu to Windows? I have tried to edit the grub.cfg file but it wont let me [URL] i need the .NET framework for a lot of my studies so i need to default into Windows
View 4 Replies
View Related
Jan 24, 2010
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
View 3 Replies
View Related
Jul 2, 2011
I bought my wife an HP Mini [URL].. and want to get Ubuntu Netbook running on it. It comes with Windows 7 Starter, which we want to retain because Netflix won't run with Linux (gives you some BS error about "your browser is compatible, but your OS isn't"). So, I'd like to dual boot.
My desktop right now runs Kubuntu, and then I can boot in XP using VirtualBox OSE. Owing to the fact that the netbook is down on power relative to my desktop, doesn't seem like a good idea on the netbook, hence dual boot. I've seen a lot of "help, I just screwed this up!" threads, and since HP wasn't kind enough to send along a disc with Windows 7 on it, I need to get this right the first time. So, I'm going to post what I'm planning to do, let me know if I'm going to mess this up. I've compiled the below looking through a bunch of previous threads.
1) Defrag Windows drive
2) Use Windows 7 software to shrink the Windows partition
2b) Do NOT create a new partition using Windows software, just keep it unallocated
3) Boot off of USB key with Ubuntu in it, select unallocated space for install
Questions:
1) When I boot the computer up, I should get a GRUB screen asking which OS I want to boot into, correct?
2) I'm downloading 11.04 right now...anything to watch out for?
3) I couldn't find an install file for Ubuntu Netbook, do I make that selection during the install?
View 5 Replies
View Related
Sep 1, 2011
just spent hours trying to set up a dual boot with windows 7 and ubuntu. i now have both installed, however, i dont know how to load ubuntu. it automatically loads windows 7 on boot.
p.s both 64 bit if that matters.
View 3 Replies
View Related
Apr 8, 2010
I would like to be able to edit which OS is set as default on the first selection menu. I installed Ubuntu via windows xp. and have Grub 2 installed. When I start my computer, first I see is the BIOS, then I have a menu which allows me to select either windows xp or Ubuntu (windows xp is the default which I'd like to change to Ubuntu). Once I select Ubuntu, then I get the menu allowing me to select between the different upgrade versions.
From all the pages I read through on editing grub2 defaults, they only refer to the second menu that I get to pick between the upgrade versions or kernels (I think they are referred to). What I'd like to do is set Ubuntu as the defualt on the first menu screen, as Ubuntu is my preferred OS and it can load automatically, then I don't care what the default upgrade version is loaded (this i have understood how to edit).
View 3 Replies
View Related
Aug 16, 2011
I wanna use Windows Xp as default system because this laptop is not mine.I tried to use startup manager but it doesn't work. Do you know other way to choose the default os?
View 3 Replies
View Related
Jan 12, 2010
I have encountered a problem when installing fedora 12.
1- It told me that there is no sufficient RAM so it logged in text mode. But I have 256 mb RAM and the lowest is 192mb for the graphical mode.
2- The RAM specified in the manual of fedora the DDR or the VGA.
3- After the installation it ask me to log in as shown localhost login:
What should I type in this? Whatever I wrote it ask me to write password. But if I try to write any thing in it, it didn't respond or write any thing.
4- How could I login the graphical mode after installation in text mode.
5- I have encountered another problem when boot the set it load fedora by default and didn't ask me to choose between fedora and previously installed windows xp.
View 2 Replies
View Related
Feb 18, 2010
I just bought a Dell 537s machine and configured it for dual boot of Windows 7 and Kubuntu 9.10. On my old dual boot machine I had the Windows System and the Linux System on different disk partitions. That way I could write fstab in such a way as to make the Windows System read-only as seen from Linux, so Linux couldn't mess up any Windows System files (and since Windows can't read ext3, Windows couldn't mess up the Linux System).
But the new machine came with Windows 7 installed and gobbling up 3 primary partitions. Kubuntu installed itself in such a way that Linux can read/write to the Windows System. This makes me nervous that Kubuntu might be able to mess up Windows 7.
Is there any way to make specific Windows 7 directories/files unwriteable as seen from Linux without altering their behavior in Windows 7?
View 1 Replies
View Related
Aug 4, 2010
I have created 5 partitions:2 GB ext320 GB ext310 GB ext320 GB ntfs400 GB ntfsI have already installed XP on 20GB ntfs. Will dual boot work if I use the 3 ext3 partitions to install Ubuntu?
View 4 Replies
View Related
Jan 2, 2011
I have a windows 7 machine and installed ubuntu 10.4 32 bit in its own partition. I want to replace the 32 bit ubuntu installation with a 64 bit installation. I downloaded the 64 bit version, booted up on the install cd, and started the install. I got as far as the partition set up before chickening out. I was going to use the manual partition option, select the existing ubuntu partition, reformat, and install. I chickened out because i was afraid that this would also reinstall the grub boot loader without the dual boot option disabling my ability to get into win 7. How should i proceed so that i can replace the existing 32 bit ubuntu with a fresh 64 bit install and still be able to boot into win 7?
View 4 Replies
View Related
Mar 3, 2011
I currently have xp installed on the 1st partition and Ubuntu installed on the 2nd.Both partitions are on the same drive.(Being the 1st drive)I have just purchased a new case and some other components and wish to take the opportunity to change my current setup so that xp is on the 1st drive (alone) and Ubuntu on the 2nd drive (alone) Using clonezilla, I take a backup of each partition separately.I then copy back the xp partition to the 1st disk. I then copy back the Ubuntu partition to the 2nd disk.I gather at his point i run the live Ubuntu cd, open a terminal and run sudo update-grub.
View 2 Replies
View Related
Mar 7, 2011
I 'm currently using grub to dual boot Windows Vista and Ubuntu 10.10.These are some of my partitions:
- one NTFS partition for Vista
- one NTFS partition for my Vista Data (shared with Ubuntu)
- one ext3 partition for Ubuntu (mounted at /)
- one very large ext3 partition for my Ubuntu home folder (mounted at /home)
I would now like to add Windows XP to this setup, but I am not sure where to start.I know I need to somehow shrink the large ext3 partition so I have an extra partition for XP, which should be NTFS.Then I assume I need to install XP on this partition, and somehow make XP appear in grub.how to do these things. Can anyone help? Please keep the instructions very basic, do not assume that I know anything.
View 2 Replies
View Related
Oct 3, 2010
I've installed Windows 7 Ultimate on a notebook which previously ran Vista. No problems there.I've now installed Ubuntu (now updated to 10.04)so that it can boot to either OS.
It all works fine and when I first power up, I get a screen which invites me to select the OS I want to use. There are however two problems:
1) it defaults to Ubuntu (whereas I would prefer it to default to Windows 7 (it's a work laptop and most of the applications are Windows-specific),
2) the list of choices is getting increasingly complex with an expanding list of choices (with each major update of Ubuntu adding more); it even seems to include an option to go back to Vista!As long as I move down the list and make the right selection quite speedily, I get to where I want to be (though, as I say, I would like to change the default option).Is there any way I can edit/shorten this list without damaging the functionality and how can I change that default?
View 9 Replies
View Related
May 23, 2011
I am thinking about installing Ubuntu dualboot with Windows 7. However, I feel that it'd be a pain to select Windows 7 constantly as it is my main OS for work and school. Ubuntu would be for offtime tinkering and as such probably booted once or twice a week at most. I intend to use the system to use the OS not to use it for serious work. Before I install would it be possible to install it in Dualboot while maintaining the ability to boot W7 by default unless pressing a special key to come to the Grub bootloader or something like that.
View 1 Replies
View Related
May 20, 2009
how to install fedora on a hdd that already has xp sp2 and setup a dual boot.
View 2 Replies
View Related
Jan 8, 2011
I have a laptop running windows vista already and I need to run Red Hat 7.2/7.3 or Fedora Core 1 on there as well. I am in the process of downloading Red Hat 7.3. I haven't done this before so I'm wondering if there are any guides out there that detail how to set this up to dual boot? Is Red Hat 7.3 a better option over Fedora Core 1?
View 2 Replies
View Related
Jun 12, 2010
I've got 13.1 x86_64 installed on /dev/sda2, and I would like to have 13.1 x86 installed on /dev/sdb2. How do I setup lilo.conf to handle this? While installing 13.1 x86 on /dev/sdb2 I skipped the LILO step, so what I currently have is a full 32 bit Slackware 13.1 install on /dev/sdb2, but no way to boot it.
View 2 Replies
View Related
Jun 15, 2011
I created a dual monitor setup in Slack 13.37 using the KDE systemsettings -> Monitor Setup function. (Sadly I had to rebuild ~/.kde in the process, but that's a different story.)
I verify that ~/.kde/share/config/krandrrc contains the new monitor setup (both screens active). I have saved a startup session with krandrtray running. However, when I logon, the system always starts with both screens in clone mode. I always have to go into systemsettings or krandrtay and redo the dual monitor configuration.
Is there a better way? Do I have to create a suitable xorg.conf (which I will try when I get home) or is there another way to boot into the dual config automatically?
View 4 Replies
View Related
Mar 23, 2011
I was struggling how to phrase the question (in the subject) so let me clarify... I wish to install Windows 2000 and then do Ubuntu, on the same PC. I never had a dual boot before but I understand that it goes automatically (after a short time) to default Windows if Ubuntu is not chosen (on the boot up screen), correct? If so, if there's a "countdown" of sorts, is there a way to disable it? I wish to have control over that aspect, have unlimited time during that boot "choose one" screen.
View 7 Replies
View Related
Jan 27, 2010
I am planning to move my main OS from Windows to Ubuntu (Yeah I am that impressed) but I wish to move windows to my current smaller hard drive until I find all ubuntu replacement programs i can use then eventually eject the windows drive. The problem is has we all know who dual-boot you have to install windows first before ubuntu as the windows mbr is when grub is stored and gets wiped when you install windows.
It must be possible to add windows as secondary OS while keeping / or reinstating grub must it not it surely (eg on 10.4LTS release it would be ok, but if i installed windows vista or 7 on my secondary hardisk it would destroy grub).
View 9 Replies
View Related
Apr 16, 2010
I have always use dual-booting vista--ubuntu, I am getting bit tired of windows, so I want to install ubuntu, specially lucid is coming soon. I want to have the possibility to install windows in case I will need it in the future, like working with Visual Studio, ubuntu always detect if windows is installed, if windows is installed first, does windows also detect if ubuntu is installed ?
View 8 Replies
View Related
May 23, 2010
I have 3 hard drives: one with vista installed on it working fine, one with 10.04 installed on it and working fine and the last is just a media storage drive. Currently I have been unplugging the windows or ubuntu drive depending on which OS I want to boot. What do I need to do so that I don't have to physically disconnect the drives and can just pick which OS to boot on power up?
View 3 Replies
View Related
Jul 5, 2010
I installed Ubuntu 10.04 lucid lynx 64bit on my mac pro in a dual boot setup with os x. When installing I had some trouble figuring out the partitions, especially because the thing happened with the extra partition from nowhere. I deleted the small partition created by the installer, synced the GPT and MBR, installed GRUB on /dev/sda4 and all was fine.
After my first software update my system is now broken, after rEFIt it got stuck on a black screen. I started up from the livecd, chrooted into my system, reinstalled GRUB on /dev/sda4, installed it on /dev/sda too, but that did not really help. I now get to the GRUB rescue shell, but I'm pretty clueless what to do. Also it does not seem a widespread problem, since I didn;t find many reports of dual-boot macintels breaking with this update. What can I do to restore my linux system ?
View 3 Replies
View Related
Jul 26, 2010
When I installed Ubuntu I set it up to dual-boot with windows and didnt put much thought into the partition sizes, and now I want to make the ubuntu partition bigger. I shrunk the windows partition from gparted fine and then booted up off my ubuntu 10.04 disk to make the ubuntu partition bigger, but it won't let me do so from gparted. Attached is a picture of how my hard drive's currently set up.
View 8 Replies
View Related
Nov 26, 2010
I'm thinking of dual-booting Ubuntu 10.10 and Arch Linux. It seems that I'll have to do some editing of the grub.cfg file, but I have seen numerous warnings not to do so. After a bit of poking around, I've heard about a script that does the editing for you built in to Linux (or maybe just Ubuntu).
My questions are:
- If the aforementioned script does exist, how do I use it?
- else if it doesn't exist, how do I not directly edit grub.cfg?
View 1 Replies
View Related
Jan 1, 2011
i have an acer aspire one with a 250 gb hdd the hdd is currently partitioned into two parts part 1 - 85 or so gb, has windows installed part 2 - the rest which is currently unallocated. i am trying to install ubuntu so that each has its own section and will dual boot once in the ubuntu installation window, how do i set up the partition to achieve this? i am trying to install ubuntu 10.10 netbook
View 4 Replies
View Related
