Ubuntu :: Lucid Lynx Won't Boot. No Recovery Option On Grub2?
Jul 6, 2010
After a lot of updates yesterday I have found that Lucid will no longer boot, I just get a blank screen that has a cursor flashing in the top left corner. I can't boot into recovery mode to see what the issue(s) might be because I took that option out when I ran update-grub.My question is this, is there a way to run update-grub -either from a live-cd or grub-rescue mode- that would put the recovery boot option back in? I have already edited the /etc/default/grub file to comment out the field.
I am trying to install Lucid on my Laptop but can't get the live cd to boot correctly. At the moment, it's giving me a purple screen with a white logo at the bottom, then a black screen with the underscore character blinking, and then nothing. (I have an HP tm2, with a USB DVD/CD drive. 64bit intel core 2 duo. I am using the Ubuntu 10.04 Desktop AMD64 .iso. I also tried the i386 .iso)
Is there someone from Dallas, Texas, USA area? I've got a friend there with lucid lynx on a netbook - and she says something's gone wrong with it - she cannot boot. Maybe someone could maybe somehow meet with her and see if there is a possibility to fix it? As i don't really know what's wrong but I am on another end of the world and have no chance to figure it out.
I'm dual booting Ubuntu and Windows 7. On my 7 partition I have Paragon Backup and Recovery Suite installed. This program has a boot screen, "press F6 to enter recovery console." Well, I have a boot disk for that console, rendering the boot screen useless to me. In addition to that, it replaces Grub2, so every time I want to boot Ubuntu I have to boot the livecd and reinstall grub. Is there any way to remove this boot screen?
I just downloaded the Lucid Lynx 10.04 LTS Install CD for the desktop. I am concerned that I have downloaded the wrong ISO or that the CD that I burned is not behaving properly. Unlike all of the other Ubuntu "Live CDs", this one doesn't offer you a choice of what Ubuntu does at Boot-up. There's no menu that asks what you'd like to do. This CD doesn't give you choices like:
- Test Drive Ubuntu without making any changes to your computer - Install Ubuntu - Test CD for Errors - Test Memory - Boot from Hard Disk
Instead, this CD just boots right to a Gnome desktop. Normally this wouldn't be a problem, but it turns out the the CD is performing some actions behind my back that I don't like. All that I wanted to do was to check the CD for errors to make sure that it burned properly. I didn't want it installing on the system where I was doing the burning. Instead of giving me options at boot, the CD automatically loaded Gnome, and then proceeded to mount all of the drives on my system, and then attempted to establish connection to IP address 91.189.90.132. I didn't like that. Luckily my firewall is secure enough that it stopped this unauthorized outbound data traffic dead in its tracks. I used reverse DNS to look up the owner if IP address 91.189.90.132. Here's what I found:
Code:
http://whois.domaintools.com/91.189.90.132 IP Information for 91.189.90.132
[code]....
Is this a Live CD, where you have some options about what to do at boot-up, or is this only an install CD? This information isn't clearly spelled out on the download page. this LiveCD taking control of my computer, mounting my drives, and then establishing contact with Canonical Ltd., without even giving me a menu option before doing so.
I installed bootchart and uploaded an image of my latest boot on imageshack: [URL] but I do not know really how to interpret it. Bare in mind that I did not use to have this problem while running Karmic...back then the OS started twice as faster as it does now after the update (now it takes at least 75 seconds to boot) .
Problem occurred after attempting to update firefox and configure evolution. Attempted to update firefox last night, it froze, attempted to open the system monitor to end the unresponsive process, and got a message saying the system was unable to support a new process because it couldn't fork. Did a forced reset, and the following now happens upon starting up. After selecting ubuntu (as it's a dual boot system with Windows XP) at the grub loader, blank screen, to this:
Code:
mount: mounting dev/disk/by-uuid/5b24d4b5-9b8d-4608-9387-0d92756dcdd8 on root failed: invalid argument mount: mounting /dev on /root/dev failed: no such file or directory
[code]....
It will not run recovery mode, and I have no bloody what it means by init=bootarg.
EDIT: Nevermind- I'm going to try the methods listed in [URL], and hope the gods of fsck smile upon my lowly hard drive.
ibm a31 2 gig ram and the nasty ati mobile 7500x graphic 10.04
been working like a charm. booting up flawlessly to desktop and then I decided to change my backround and now when I boot I get just past the ubuntu with the dots screen and then a mostly black with a few white and red scratches. if I go to recovery and then start x, boot up is flawless.
I am using a Dell XPS m1330 with ubuntu Maverick 10.10 and with a Nvidia card. Recently I wanted to add plymouth support to my boot screens via this script: [URL].... but maybe i did something that ruined my pc and now, in GRUB, i can only see recovery kernels. The situation is this: in grub i see
linux recovery kernel 1 linux recovery kernel 2 (old one) memtest windows 7
My "normal" linux kernels disappeared. When I want to boot linux I use a recovery kernel, then I simply hit "resume" in the process, do the textual login and than use the command "startx" to start the system. However i'm getting no Plymouth and no normal boot. I have already tried to fix grub recreating the linux kernels, but they just don't show.
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
Im dual booting vista and ubuntu 10.10 when i start up i get the option to boot linux OR i can boot window recovery (loader) which works or i can choose windows xp which doesnt even work and im not sure why its there since i dont have xo installed and i never have on this pc. it doesnt say anything about vista anywhere.
My question is...is this a problem? it seems to work fine but i dont want to have problems later on.
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now: - NTFS partition (containing general rubbish) - Ubuntu / partition - Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
how to change (rename, delete) lines from boot list in grub 2, Ubuntu 10.04? For example, when I boot my pc, I have a boot list with options "Ubuntu 10.04", "memtest" and "Windows 7". I want to delete "memtest" line, as I don't need it, and rename "Windows 7" line to, for example, "Windows 117". How can I do that? Where I should look and edit? In old grub it was enough to edit /boot/grub/menu.lst, but in Ubuntu 10.04 there is no such file and other grub2-related files (like grub.cfg) do not contain this info to rename or delete lines. So, I can't figure out what to do.
This started a few days ago and I checked back through recently installed packages and nothing looks related. If I boot into ubuntu normally, plymouth looks a mess, but then things boot fine but while the mouse is showing and ubuntu goes about with connecting to networks and so on, but it doesn't register the and input from the mouse or keyboard. It will sleep if you press the power button, but its no more responsive after waking up.
If I boot into recovery mode, and use the failsafe graphics option then everything runs fine. Apart from 3D graphics being pretty slow, which I can kind of understand. I get the same behaviour on all of the last three kernels. I'm running the latest maverick on an HP 6715b. i386 version although the processor is 64 bit compatible. 2Gb RAM.
I've set up a triple boot system (Ubuntu Karmic, Windows Vista and OSX86 -- a patched OS X which works on a PC) on a Dell 9200 (C2D 2.13 GHz, 4GB RAM, nVidia G210). I sue Grub2 as the bootloader and update-grub picks up OS X and it boots without any problem.
However, although when booting OS X using its own Darwin bootloader, I can apply the boot option "Graphics Mode"="1680x1050x32" to ensure that I get the screen resolution that I want, when OS X boots from Grub2, the only resolution available is 1024x768 which is disappointing. I have tried adding gfxmode=1650x1050x32 to the OS X section of /boot/grub/grub.cfg in Ubuntu but this does nothing.
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
i had a dual boot with xp and lucid lynx, then upgraded the xp to win7. windows commonly overwrites grub with it's bootloader. and so it did. now i can't access my lucid OS. i need to get grub back (i need to get lucid back).
Dual boot PC, boot disk and WIN XP are on good disk, Ubuntu was installed on failed disk. (I prefer separate disks for each OS).
I know I will need to reinstall Ubuntu later, and of course, GRUB2 now crashes without the Ubuntu disk.
Confirm that the only thing I need to do when I get the new drive installed and partitioned is to boot my XP disk in Recovery Mode and type "fixmbr", (then reboot to confirm clean WIN operation on the existing disk) then install Ubuntu as normal on the new disk.
I switched over from Ubuntu because I realized Ubuntu sucks now (lol), but anyways... Now I'm trying to get Grub2 to boot up properly, but this "xputs" error pops up and drops me to the recovery prompt. I tried the grub-install dev/sda and all it did was recognize my Windows 7 OS (as Vista) and added it to the bootloader list and didn't fix the "xputs" issue.
I heard that doing a chroot is the most effective solution. Forgive me, but I don't know what "chroot" means or how effective it is. I can specify more information about where the OS is if needed. I have the boot flag set to the Debian OS at the hd(0,5) or sda5 I think, and Windows is at sda1 (I think). I just want to make sure I can fix this without damaging Windows, and I'll try to get more information.
Right now, I can only get into Windows or Debian with UBCD and Grub2 Super Disk and I know that sometimes Parted Magic could orderly mount the disks differently, so I don't know if it was sdaX or sdbX, but probably sdaX. I'll check again.
after messing around with plymouth manager to try and get a decent boot screen(for the 3 weeks i've had 10.10 installed, it's just been a plain text bootup) it seemed to have removed my main boot option without recovery. i'm still able to boot into recovery and pull up my graphical environment but i can't seem to figure out how to get my normal boot option back.
Ubuntu 10.04 is unable to set up my Canon Pixma IP 6000D printer.So earlier tonight when my wife wanted 2 recipes she saw on this am's Today Show, I had to restart my computer with a Fedora 13 live CD in the drive. F13 quickly installs my Canon printer and I am able to print the recipes.But this sure is a convoluted way of printing 2 short text files.to get my printer to work with Ubuntu.I've been using Ubuntu almost 2 years now, and love it, love it, love it, except for this one little thing.
The new Wacom Bamboo Pen (CTL-460) doesn�t work in Ubuntu Lucid out-of-the-box. You need a newer kernel module than the one that comes with Lucid by default. It�s pretty easy to get it working though, you just need to know how.
First, install some compiling tools and header files:
Code:
Code:
Now unpack, configure compile and install it:
Code:
# I know this is the wrong version, but it's the highest available and it works
Code:
The tablet should work now. You can also add the module name to /etc/modules to automatically load it on boot.
He also says (and I can confirm) that the gray lines are the new borders of the tablet. A little annoying, but I imagine one could configure that, too.
I upgraded from Karmic to Lucid yesterday and today today I've noticed that I can no longer apt-get update through the terminal. I'm behind a corporate firewall, so up till now I've always exported the proxy address like so:
Code: export http_proxy=http://user:password@address:port This hasn't worked under Lucid. I did some searching and found that Lucid did away with
I have tried out Lucid Lynx Beta 1 back in march. During the installation I was announced that support for bluetooth was dropped. I installed anyway, thinking it would be back in the Final Release. Meanwhile (between March and April) I reinstalled Karmic because I really needed the bluetooth. I can see in the upgrade that bluetooth still isn't available. What should I do about this? Is there a way to keep Lucid Lynx and bluetooth? Or will I have to stay on Karmic until the end of times?