Ubuntu Installation :: Can''t Boot Kernel - Error 15 / Fix It?
Aug 7, 2010
Had an issue after update in the nvidia module was not loading, after much messing about i found that system had installed kernel 2.6.32-24 but this had been added to grub even after running update-grub even though kernel was in /boot ?
It was booting into 2.6.31-17 fine
i removed 2.6.32-24 with apt-get remove and then reinstalled.
Now on reboot i can menu entry for 2.6.32-22/24 and 2.6.31-17 but none will load, just error 15 file not found?
View 4 Replies
ADVERTISEMENT
Sep 2, 2010
i used dual boot system (xp + ubuntu 10.04) and decided to replace them with jolicloud os and then it started In about 86% of jolicloud install it showed me error of hdd partition. I tried different versions of partion type, used also option to install on entire hdd - none of my tries actually worked (also with many hdd formating tries) so I was able to use only usb as live user for Jolicloud, and i burned ubuntu iso on disk - on boot up showed boot up error, i checked BIOS and everything seemed to be ok with boot order. So after many tries i took my old Gutsy Gibon 7.10 live cd. I first updated it with LTS version (8.04 Hardy Heron) and after that I updated it to 10.04 but it seemed to not finish when i saw some error in terminal and installer was exiting 13 minutes before finish then it had kernel panic - fuuuuck! After that i tried to download small versions of linux like Austrumi and puppy linux , but it showed me boot error or cd didnt even open install dialog without showing boot error.
View 1 Replies
View Related
Jan 21, 2010
I did the "yum update" today, the process was doing well but, the follow error appears:
Transaction Check Error:
installing package kernel-PAEdebug-2.6.31.12-174.2.3.fc12.i686 needs 9MB on the /boot filesystem
Look:
Code:
Transaction Summary
==================================
Install 10 Package(s)
Upgrade 33 Package(s)
Remove 1 Package(s)
[code]....
View 6 Replies
View Related
Jul 23, 2009
I have downloaded the i386-DVD.iso image and have burned it on a DVD using Nero Express 6, when it boots from the DVD, it give me an error message "Could not find kernel image: Linux" and the boot: prompt after that. I have burned another DVD using Infra Recorder with minimum write speed but with the same problem. I have Ubuntu already installed on the computer.
View 8 Replies
View Related
May 13, 2011
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies
View Related
Oct 12, 2010
I started installing the beta of Maverick a few days ago, but the update server was running inordinately slow, so I canceled it. Several times, I have attempted to continue the installation, but I've been unable to reach the server. Shortly after this happened, I could no longer boot normally--I get the error:
Code: Kernel Panic - not syncing:VFS:Unable to mount root fs on unknown-block(0,0) Choosing the previous kernel fixes the problem.
So, I obviously want to upgrade to the release version now. When I open the update manager, I get asked if I want to do a partial upgrade to complete the install. I'm a bit leery of doing this since I only have one previous kernel to go back to (my list got really long and I have another operating system entry underneath, so I set my automagic boot manager to only keep two), and if I can no longer boot after the upgrade, I'll have to use Windows until it gets fixed... So, should I finish the upgrade, try to troubleshoot the error, or do something else to jump right to the latest release, after being partway through the upgrade?
View 3 Replies
View Related
Jan 4, 2010
Over the past few days I have been trying to install an older kernel (kernel 2.6.28.1) on ubuntu 9.10 64-bit WUBI installation. I compiled, installed, and updated my grub for the kernel. When I reboot, the grub menu correctly gives me the option of booting into the older kernel but when I do so I receive the following error message:
error: you need to load the linux kernel first.
I am at a complete loss on how to fix this. I even downgraded grub but I still get the same error.
View 2 Replies
View Related
Apr 28, 2011
I tried to install last Ubuntu distribution (11.04) in a laptop that fits setup requirements. I downloaded de Iso, burnt on cd and restart the laptop with the cd inside it.The hard disk does not have any partition, it's empty, I suppose installation gives that opcion.At the begining of the installation, before any interactivity, I get this error:
View 2 Replies
View Related
Oct 1, 2010
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
View 1 Replies
View Related
Feb 11, 2010
I use a pretty fresh installed RHEL 5.4, which should be very similar to Fedora. After the basic installation I installed xen and xen-kernel via yum with no errors. I can select the xen-kernel at boot time. But after booting the normal kernel shows up.
[root@noname boot]# uname -r
2.6.18-164.11.1.el5
My /boot/grub/menu.lst looks like:
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
I can't see anything wrong and I did not change/try anything.
View 11 Replies
View Related
Mar 14, 2011
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
View 9 Replies
View Related
Oct 23, 2010
I have installed Ubuntu 10.10 on a USB 2.0 flash drive (8GB),like this: [url]
The installation was successfull, but when i want to boot ubuntu, it shows the grub, and after it, an error message: "You need to load the kernel first. Press any key to continue"
I've got a Macbook Pro 13'' (2010 edition) with a Intel processor.
My grub.cfg file is here:
Code:
View 9 Replies
View Related
Jul 26, 2010
I've been having a problem on my AMD based machine, 4cpu, gigabyte ga-ma78gm-s2h Mobo, 8GB mem, two 2 terabyte Sata HDs.One thing I've found is that any kernel after 2.6.32-17 has a randomness at boot time whether the system will completely boot or not.
For instance just today I downloaded and installed 2.6.32-24
It fails to boot (I've tried cold boot, warm boot).Running its repair also fails to completely boot.My experience is that if I keep trying it "may" eventually boot but I believe there was some change after 2.6.32-17-generic that's causing the problem.Because as with 2.6.32.23... which also fails to complete bootup many times... eventually my guess is that 2.6.32.24 will also boot "sometimes".But why does 2.6.32.17 always boot for me? Something changed and its not my setup.
View 1 Replies
View Related
Aug 4, 2010
I ran the update through yum (replicated results twice) and whenever I boot to the new kernel it either freezes on the F logo or screen goes black right after f logo. No commands work whatsoever (tried em all). I can boot to an older kernel (2.6.33.3-85.fc13.x86_64). the ones that fail are: 2.6.33.6-147.fc13.x86_64 and 2.6.33.6-147.2.4.fc13.x86_64.
The Fedora error system gave me a bug report I submitted, here's what I got:
Package: kernel
Latest Crash:Tue 03 Aug 2010 09:46:33 PM
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 00000000000005b8
Bug Reports:Kernel oops report was uploaded
View 14 Replies
View Related
Nov 19, 2009
I am using Centos 5 with an old kernel. I want to build the latest version for atheros 5K wireless drivers. So i downloaded, and compiled with the ".config" which is already in /boot , and made it ready to run.
However, whenever i try to boot with new kernel, after choosing it from the grub menu, i got the following error. I tried many many .config files but the result was the same.
Here is the screen capture of the error;
I'm trying this process for a week without any success...
View 5 Replies
View Related
Mar 15, 2010
I've just seen a strange set of error code during my boot sequence:
WARNING: at mm/page_alloc.c:1813 __alloc_pages_nodemask+0x5ce/0x6c0()
Hardware name: MS-7250
Modules linked in: lp fuse nvidia(P) joydev snd_cmipci gameport rtc_cmos rtc_core thermal processor snd_pcm snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore thermal_sys i2c_nforce2 rtc_lib button agpgart k8temp hwmon psmouse sg i2c_core ppdev parport_pc parport forcedeth serio_raw evdev
Pid: 1543, comm: mount Tainted: P 2.6.33 #2
Call Trace: .....
The machine appears to run normally otherwise.
View 4 Replies
View Related
Mar 27, 2011
I Installed Fedora 14 about 2 weeks ago and was just settling into using it more or les permanantly and had to turn of the power to do some maintenanace. When I rebooted I got the grub> prompt. As I have already shut down and rebooted several times over the last couple of weeks, I could not se why this happened, so I rebooted and stiull got the same problem. Things I have tried:
[code]...
I am currently using a 64 bit ASUS P75P55-M motherboard.
View 1 Replies
View Related
Jan 7, 2010
I just installed Fedora 12. When I boot, only the following three lines are printed: pnp 00:09: can't evaluate _CRS: 12298 ACPI: Expecting a [Reference] package element, found type 0 Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) I first installed Fedora using a RAID 1 setup that mirrored each partition, so I thought the problem was coming from GRUB and confusion from what to boot off of. However, I reinstalled Fedora using a simple single drive setup (left the second drive without any partition), and the same error was returned. Is this an ACPI issue with this particular motherboard/BIOS? Any ideas for how I can fix this?
View 1 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Jun 10, 2009
I am trying to install Fedora 11 from the full DVD iso on a system using an Intel D945GNT motherboard with a dual-core 3.2GHz Pentium D installed. The installation hangs quite quickly and produces the error "Kernel panic - not syncing"... The previous line is something along the lines of "EIP: [something] intel_i915_configure() [something else]". I have tried many different kernel boot options, such as acpi=off, nolapic, nommconf, and the like, but to no avail. It seems as though this has something to do with a memory mapping conflict due to the allocation of video memory for the on-board graphics chip, but I'm not at all certain about that.
View 3 Replies
View Related
Apr 26, 2010
I've been looking forward to making the switch to Ubuntu for a while, but ever since I did, the road's been pockmarked with errors and hassles. That's, primarily, because I don't know what the hell I'm doing. Let me explain how I installed Ubuntu: All I did to install Ubuntu was download the file from the website and run the program. I didn't burn anything onto a CD or USB; I just clicked on the .exe file and let it run from there. Everything worked great - all I had to do was boot my laptop and choose from either Windows 7 or Ubuntu. Now, I had no idea how to watch videos, so I started to install a lot of stuff from the Synaptic Download Manager. Now, I don't know all of what I downloaded, but it was mainly games. The next thing I know, I get this page when I choose Ubuntu:
Code:
GNU GRUB version 1.97~beta4
[minimal BASH-like line editing is supported. For the first word, TAB lists possible command completion. Anywhere else TAB lists possible device/file completions.]
sh:grub> _
So I hit TAB and try the easiest command on the list, BOOT. This is what I get when I try boot:
Code:
error: no loaded kernel
So I don't know what I did wrong.
View 4 Replies
View Related
Jun 28, 2010
I have windows xp and now I have installed UBUNTU 9.10. When my laptop starts it comes up with the option of Windows Xp and Ubuntu. Selecting windows xp works fine here but Selecting UBUNTU comes up with another screen giving three options.
1. UBUNTU
2. UBUNTU recovery and
3. Windows Xp
Selecting any of the above doesnt work here. With option 1 & 2 it gives the error message
error: you need to load the kernel first
I am totally new to this UBUNTU.
View 1 Replies
View Related
Oct 11, 2010
I've finally gotten around to installing Ubuntu 10.10. I currently have it installed on on a 320GB HDD. It's the 64bit. I also have Windows 7 x64 on a 1TB HDD. After I installed it, I keeping getting "Error: You Need To Load the Kernel First." Windows 7 boots up fine, but Ubuntu doesn't. I'm almost completely new to Ubuntu so I don't know how I would go about fixing this.
View 9 Replies
View Related
Aug 17, 2010
i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
[Code]...
View 3 Replies
View Related
Dec 2, 2010
I changed my motherboard battery last night, and now get "Read Error" on booting to Ubuntu, on dual boot system. This is the most frustrating thing in an otherwise great operating system. It is the second time I have encountered this issue (last time was a change of power supply). I fixed it last time after three days of re-loading Grub2 and playing around Grub 2 updates, etc. Fixed it eventually, but as usual, no idea of what eventuality fixed it. I think I found a web page buried deep in the 'net, which talked about device.map. Do you think I can find it again - not yet - day 2 searching for the answer... This is what the grub script tells us:
[Code]....
View 7 Replies
View Related
Aug 3, 2011
I updated my kernel from 2.6.38-8 last week via the Update Manager. Now my IBM Thinkpad Z60t just sits there with my Caps Lock indicator blinking below a black screen if I try to boot into Linux 2.6.38-10. I can go to the "Previous Versions" sub-menu, click on "Linux 2.6.38-8" and it boots just fine. I'm running Xubuntu Natty.
No kernel updates available since this happened..
View 1 Replies
View Related
Jul 22, 2010
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
View 5 Replies
View Related
Mar 7, 2010
I've been using Ubuntu since 7.10 Gutsy Gibbon. I only recently fully switched to Linux OS's, and Ubuntu is now my primary. I currently have 9.10 installed. CURRENTLY I also have Backtrack 4, and Fedora 12 (Ugh!).Previously, I thought something was wrong with my my filesystem in Ubuntu 9.10, and after an upgrade of the linux kernel, I started to get Error: You need to load the Kernel First. That's where my problems started. I had upgraded to 9.10 from 9.04 and I still had Grub Legacy, so I went through hoops to try and get it to work, but eventually everything just kind of broke, and I completely wiped off my partitions on it and started fresh installs of all 3.
And now that the new linux kernel is released, 2.6.31-20 generic (I think... That's what the highest number on a file I can find in /boot is)I went through a few more hoops and ladders and tried to get it to work, but to no avail. I've looked the internet for a solution to this and tried just about everything but there is no unified answer, and I've seen on Launchpad there are alot of bugs that are classified as 'Fixed', but the problem still remains.I took out the 'quiet splash' part in the GRUB2 line for the newest kernel and it didn't do anything. It only changed it to "Error: Couldn't find file".This is the top two kernels (Main and Recovery for the new, and Main and Recovery for the previous working one)
Quote:
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-20-generic" {
recordfail=1
[code].....
View 9 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Aug 30, 2010
I'm trying to install Ubuntu on a computer with Vista SP2, my BIOS supports booting from a USB drive. Ive used unetbootin and Universal USB installer to setup the ISO on the drive, as well as trying Ubuntu version 10.04 and 9.10. The problem is that during the boot it stops at a line reading "SYSLINUX 3.86 2010-04-01 CBIOS Copyright ...", no error messages, it doesn't appear to be frozen as there is a blinking cursor under this line. The boot performs normally up to this point, it happens when, during a normal boot to vista, it says "boot from CD/DVD" then loads windows.It shouldn't be a hardware issue, the computer is pretty new, and I had an older version of Ubuntu install on it temporarily.
View 1 Replies
View Related
