This is the second time my ubuntu was killed with updating, it would freeze, or goof up, or something to mess itself up. I need a better way to update, one that will not corrupt my Ubuntu.
View 2 RepliesI'm trying to install 10.10 Alternate AMD64 on a laptop (eMachines e510) in order to then install a minimal desktop.I haven't found anything about this issue outside of this page, which describes the problem I encounter well: [URL]It basically happens right when the base system installation starts.The link shows screenshots of it.I tried burning a CD at minimum speed, and the CD check indeed says the files are corrupt.
View 6 Replies View RelatedWhat is the preferred utility for removing a significant quantity of packages from the alternate installer and adding a few, without going through the more full-featured, start to finish customizers?
View 1 Replies View RelatedWell the title says it all.. i don't want to lose all of my settings with a fresh install and I only have the desktop CD, so can you do the upgrade with it?
View 2 Replies View RelatedI have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
I searched the forums and used hours googling this, so sorry if there`s already a topic about this. Here is my problem: I do not have a broadband connection, I actually have to log on the internet using my android as a wi-fi hotspot, works great, except that it is slow and unstable (download rate at 19kb/s), I just re-installed ubuntu 10.04, the first thing you do is to update, so I set it to update, then went to sleep, it said to be finished in 2 hrs ( yeah..I know), during the night I lost the connection to the internet and it was ALL lost..everything, even what was already downloaded, so my question is, is there another way of updating the system so that I don`t loose all I have already downloaded in case my connection go a.w.o.l ?
View 3 Replies View RelatedI think my upgrade from 10.04 to 10.10 got corrupted. The update manager got half way through upgrading the system and then complained about some dependency. I forgot I hadn't closed the update manager and ran synaptic with it still open to update some packages. In any case I think the system got in a mess as
Code:
cat /etc/issue
gives
Code:
Ubuntu 10.10
[Code]...
I am running Windows 7 and wanted to install VMWare and Ubuntu on it. So I downloaded VMware and the Ubuntu install files but I got stuck on the Language prompt. So I researched and downloaded Ubuntu alternate iso file and the install went fine.
I now launch VMWare and get a prompt for username and Password which I enter.
Actually, thats a lie. It works on the initial screen (where you can select how you want to install via command line or text based etc etc).But whatever option i select from there it loses the keyboard.The first screen (asking for keyboard layout) just sits there on english but i am unable to advance. Its as if my keyboard is unplugged (has LED backlights and they turn off as soon as it hits this screen so im guessing its USB driver related).I wanted the alternate to do drive encryption but it doesnt seem to want to know. Normal CD works fine btw.
View 2 Replies View RelatedI am dual booting a lab of 30 machines in an elementary school. They already have XP installed and I don't want to mess with that. I certainly don't want to have to go to each one with a windows CD to 'repair' each one if this goes wrong.
So i tested on one (installed through PXE) and Ubuntu boots fine but I am getting:
'ntoskrnl.exe is corrupt' errors now. I can't move on until I sort this out.
have been trying for many hours to install Ubuntu 9.10, on a system that already had 9.10 installed on it at one point (so I know it should work!) I am using an alternate install, from a USB thumb drive. I use the alternate so I can encrypt the hd. Everything goes smoothly until I am to select extra packages to be installed. The only package I select is the ubuntu-desktop, and around 80% progress, or so, it fails. I then try and complete the base install, and then login to the command prompt and install there:
sudo apt-get install ubuntu-desktopIt then requests the Ubuntu disc, which of course I don't have. It has a landline internet connection. Do I need to configure something to tell it to look to the mirrors to find the desktop? Or, should it have been included in my iso image originally
Can I upgrade UNE with the alternate CD (10.04 > 10.10)? I have some limitations on my connection and need to upgrade 2 systems - ubuntu desktop and netbook. I'd like to save on some download bandwidth.
View 4 Replies View RelatedI am trying to upgrade from ubuntu 10.04 to 10.10 via the alternate CD/DVD , following the instruction mentioned at the link https://help.ubuntu.com/community/MaverickUpgrades after executing the last step which is :
Code:
gksu "sh /media/cdrom/cdromupgrade"
I am getting error
Code:
sh: Can't open /media/cdrom/cdromupgrade
I'm trying to format a 32GB USB flash drive to ext3 for Linux.
Code:
sudo tail -f /var/log/messages
shows me:
Jan 1 23:40:42 rj kernel:
[13773.966516] sd 11:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[13800.780008] usb 2-1: new high speed USB device using ehci_hcd and address 8
[13800.932141] usb 2-1: configuration #1 chosen from 1 choice
[13800.932281] scsi12 : SCSI emulation for USB Mass Storage devi
[Code]...
When I try to boot from the Live CD of Ubuntu 10.10, I end up with a whitish corrupt screen, which should be the 'Desktop'. The CD is good and works on other PC's. I have tried two other graphics cards with the same result. It is therefore impossible even to install it. I have installed many other versions without problems. This PC works perfectly with Windows XPVistaWindows 7 and other Ubuntu versions.
View 3 Replies View RelatedI'm downloading 10.4 and I don't know which version I should use. I'm using a laptop so does that qualify as alternate? What is alternate and how is it different from desktop?
View 8 Replies View RelatedI've tried the Universal USB Installer, but that doesn't support the alternate iso. And if I select the regular desktop one, it screws up the installation when I try to boot.
Unetbootin gives me this error during the cdrom process. It says it can't find copy files from cdrom and stuff. Well of course, there's no cdrom...
I'm currently using Empathy as per 10.04's standard, but I need a new Yahoo client.
I've used Gyachi in the past, and it was great and all, but it's gone now. It's been missing from it's repository for a long time. (If that doesn't make any sense, what I'm trying to say is that it won't download from it's source, in the way that you usually install it.)
I've also heard about Yux, but out of curiosity, is there anything better? Empathy is missing some basic features, like webcam (understandable) to "message all in group"
i have a Compaq Presario S4020WM
2.0Ghz XP2400 CPU
768Mb RAM
2 40Gb Hdd
and a HD raedon 4650 AGB 1Gb Grafics Card
I have tried to install Ubuntu with this CD and it gets past the keyboard detection part and then it tells me i need to get the CD ROM drivers via removable media, i know this is a problem with ubuntu 10.04 because i can install just fine a 8.04 ubuntu.
i don't know what to do.I have tried to install from a USB but my comp is too old for that, i know its not the specific cd because i'v used about 5 different brands of cd just to see if it was the cds i was uesing,
I would just upgrade from 8.04 to 10.04 but i get to the dbus part and the comp starts to run really slowly and eventually colors just show up, i left it for an hour to see if they would go away and fix but they didn't. Iknow my comp CAN run 10.04 because i have done it before, but i uninstalled and now i can't seem to get it to work again.
P.S. i have tried the live cd, same effect.
I am trying to install ubuntu 10.04.2 onto a computer (alternate for RAID support). This is a fresh install - I am formatting all drives. Partitioning, setting up RAID, and the beginnings of the instilation appears to go fine. But part way through it "sticks" at a screen asking for a "media change" to the CD which is already in the CD tray. Nothing I do appears to stop this (i.e. clicking 'go back', removing/inserting the CD, etc). I've even tried unplugging the network connection.
The specific error reads:
Code:
[!!] Install the base system
Please insert the disk labeled: 'Ubuntu 10.04.2 LTS _Lucid Lynx_ -
release amd64 (20110211.3) in the drive '/cdrom/' and press enter.
Media change
<Go Back> <Continue>
How do I get past this point? (and yes, the red text is in red).
I want to conduct alternate CD installation with my netbook. It's going to be a dual-booting with windows XP. My version of choice is ubuntu-10.10-alternate-i386.iso. I want to implement LUKS full system partition encryption during my installation.Can anybody kindly provide some guide or step-by-step tutorials link?
View 1 Replies View RelatedI used to have Windows XP Professional on my computer, then I decided to install Ubuntu but it didn't work for me it gave me really weird errors, I thought I uninstalled it, and then I installed Debian on my computer, Debian ran smoothly but when I tried to start Windows the GRUB from ubuntu appeared and when I tried to start windows again it showed and that the hal.dll was missing, I reinstalled Windows but still the same error appeared, this also affected my Debian GRUB so I had to install it again, I don't know what I should do in this case. How can I delete ubuntu's GRUB for good? I've already formatted my windows partition but it keeps using Ubuntu's GRUB.
View 3 Replies View RelatedI am trying to reinstall ubuntu on my asus eee netbook. When I try to open ubuntu an error message appears saying that this file <windowsroot>system32hal.dll.> is corrupt or missing. How to I reinstall this file/what happened?
View 3 Replies View RelatedI think I managed to corrupt my master boot record, or have a very intractable problem with Grub.
I'm not sure how I did this, but my desktop will boot Ubuntu fine from a USB, but every time I try to install it, the install seems to go fine, but when I finish the install and the machine tries to boot the OS from it's hard drive, it does not work. The monitor does not get a signal and it just goes to sleep.
I tried posting here to resolve the problem before, tried everything on this thread: [URL]
But nothing worked.
I have even tried running the system from a USB, running a "shred" command for the hard drive and then reinstalling - my theory was that the shred command would destroy all the data on the hard drive anyway, and allow a "clean" install from whatever was corrupt on it, but no luck - when I installed Ubuntu on the hard drive, same problem.
I'm not clear where the problem lies now, I'm assuming there is something up with it's master boot record, but there are no partitions on it's hard drive and I started with a completely blank, unformatted drive.
Hey guys,
I' trying to install 10.10 Desktop from a CD onto a Dell E5410 notebook with Windows 7 installed.
The problem is that during the installation, the installer doesn't see the Windows partition, moreover, it doesn't see _any_ other partition.
I've tried with CentOS 5.5 as well and it returned some error related to GPT Partition Table corrupt which might have been corrupted by a software (or not).
Removing Windows 7 completely is not an option, there's a bunch of business applications which will not run on Linux even with Wine.
I'm not sure if the problem lies on the hardware, or the installer.
The BIOS provides advanced UEFI boot options and legacy boot, but this doesn't explain why no partition is discovered.
Tech specs: core i5, 4GB ram, 320 GB disk space. The installer is 32 bit, but I'm quite the architecture doesn't really matter.
If someone has more knowledge about this kind of issue, any answer is welcome.
I can't boot to Windows XP after recently installing Ubuntu (Ubuntu boots fine). The error that comes up (straight after selecting XP) is that it can't find "system32hall.dll".
Reason for the problem: Ubuntu is looking at the old, corrupted version of XP that I have. The 'real' version is on another partition, for reasons too lengthy to explain. Note: neither of these partitions were touched when installing Ubuntu - I placed Ubuntu in the pre-existing partitions I had setup when installing previous versions of Linux (last was Mandrake 8.)
Now, I can understand why it is looking at the old version, because it is on the first partition of the hard drive, "dev/sda1", the new version is on "dev/sda3" (nomenclature according to Ubuntu, obviously).
Question: How do I point the config file to sda3? I have tried setting root to "hd0,3" and "hd3,1" with no luck. Original code is below:
Code:
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
[Code]....
Halfway through upgrading from 9.10 to 10.04 (i386 desktop) using the Alternate CD, you are prompted to insert "Ubuntu 10.04 LTS _Lucid Lynx_ - Release i386 (20100429)".Luckily, I'd already burnt a full installation CD so swapped this and the run continued for a moment. It then asked for the Alternate CD again (20100427.1).If you haven't got a full install CD handy before you start, you may not be able to complete the upgrade.
View 9 Replies View RelatedFails to insatll from a SD card using USB, it looks for a CD rom when there is none... will not allow me to go on without a CD rom? i need to encrypt my drive? why don't the normal cd do this just like the other linux sysetems? hide it if you have to.
View 1 Replies View RelatedToday I decided to replace my 9.04 install with 10.04. (I did this on a separate hard disk.) As I am a big fan of LVM I used the 'Alternate' install CD. Everything installed fine.
However, upon booting I observed two things: firstly there was no grub menu. No countdown timer, no menu. Just a flickering cursor. After 15 seconds or so I got a message telling me that:
Code:
/dev/mapper/bromine-root (My root partition.) does not exist and that it had given up waiting. Finding this kind of strange I tried the alpha of 10.10 --- same again. Hence I have two questions: firstly, where did the nice grub menu go; secondly, what is wrong with LVM and grub these days? At the initframfs prompt I am thrown to there are some LVM utilities and they appear to show my volumes.
Switching back to my old pair of hard disks and everything works as expected (i.e, the hardware is fine and supported by Linux.)
I am trying to install Xubuntu (lucid) via the ALTERNATE CD... Everything goes smoothly until the Installer tries to install Software... There it presents me with something like: "There was a problem installing software. You can abort or choose to retry installation by choosing off the menu"
View 1 Replies View Related