Ubuntu Installation :: Cannot See Any Partitions During Install On Dell E5410 / Corrupt GPT
Feb 14, 2011
Hey guys,
I' trying to install 10.10 Desktop from a CD onto a Dell E5410 notebook with Windows 7 installed.
The problem is that during the installation, the installer doesn't see the Windows partition, moreover, it doesn't see _any_ other partition.
I've tried with CentOS 5.5 as well and it returned some error related to GPT Partition Table corrupt which might have been corrupted by a software (or not).
Removing Windows 7 completely is not an option, there's a bunch of business applications which will not run on Linux even with Wine.
I'm not sure if the problem lies on the hardware, or the installer.
The BIOS provides advanced UEFI boot options and legacy boot, but this doesn't explain why no partition is discovered.
Tech specs: core i5, 4GB ram, 320 GB disk space. The installer is 32 bit, but I'm quite the architecture doesn't really matter.
If someone has more knowledge about this kind of issue, any answer is welcome.
View 9 Replies
ADVERTISEMENT
Aug 24, 2011
Partition limit is 4 on my Inspiron 1525 so even with the space available I cannot create a Fedora partition because:
50MB for Dell Diagnostics
**GB main vista partition
10GB recovery partition
2.5GB MediaDirect partition
I'm trying to dual boot vista/fedora. I know I can delete the MediaDirect partition but that causes boot problems if the button is pressed while the power is off. I'm not sure which of the 3 Dell Partitions to remove.
View 2 Replies
View Related
Oct 28, 2010
I am dual booting a lab of 30 machines in an elementary school. They already have XP installed and I don't want to mess with that. I certainly don't want to have to go to each one with a windows CD to 'repair' each one if this goes wrong.
So i tested on one (installed through PXE) and Ubuntu boots fine but I am getting:
'ntoskrnl.exe is corrupt' errors now. I can't move on until I sort this out.
View 9 Replies
View Related
Oct 3, 2014
Was I the only one having failure issues trying to install any Debian ISO Yesterday?I got big red screens about corrupt files all while trying to install Wheezy and Jessie.All with ISO versions downloaded and burned yesterday, net install. Disc and DVD.Mint and later Fedora installed perfectly well, but I wanted Debian.
View 1 Replies
View Related
Jul 24, 2010
I downloaded the first Lenny DVD for amd64, wrote it but on trying the install on my laptop (Gateway NV5389u) I cant get past the installing base system step: I get an error that some files are corrupt / cannot be read from the DVD. I am wondering whether there's a way I can download a minimal version or just the files needed for the base system installation then use the same DVD to install the packages, coz I have a terribly slow internet connection it took me a whole 2 days to download, and I surely cant stand any more of it.
View 4 Replies
View Related
Sep 16, 2010
I tried to help my friend install Ubuntu 10.04 side-by-side with Windows XP on his Acer Aspire One netbook.Unfortunately, the installation process came to a standstill and it quit due to "unexpected errors". The second time I started the installation, I realized that the option for installing side by side was gone and that I could not mount the C: partition on Ubuntu. The error message is listed below:====================BEGIN ERROR MESSAGE======================Error mounting: mount exited with exit code 12: Failed to read last sector (299982847): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
[code]...
View 8 Replies
View Related
May 28, 2010
I installed lilo and it boots. How do I installed grub again. Do I just use synaptic manager to uninstall lilo and install grub?
[code]....
I know grub2 does not work, giving me error: ntoskrnl.exe missing or corrupt. I did install grub-legacy and it worked, but I had to re-install squeeze due to other problems. So, now I want to replace lilo with grub legacy.
View 4 Replies
View Related
May 20, 2010
Am fairly new to linux and like opensuse distro so far and determine to get it to install on my system along side my default windows OS, iva tried 11.1 and manage to get it working, however my main goal was to set it up as a development environment i.e php,java, i had to remove it later on due to certian circumstance, lastweek ive decide to try gnomelivecd 11.2 but ran into a few errors during the final stages of installment while it was Automatically Creating Configuration, with the help of oldcpu i manage to ran installation again without a black screen but this time at the same instance where the error occurs first then direct me to the failsafe screen and am stuck there ever since. Am now downloading 11.3Mildstone6 which was recommended so what am asking now is help to remove those portions,grub and restore MBR. I have tried repairing it by booting from both a winodws7 DVD and external HD but failed, the error returned was an unexpected error occurs try again. However i can boot into gnome from the live CD and Check System > Boot Loader another error popup stating that
Because Of The Partitioning, The Boot Loader Cannot Be Installed Properly.
View 7 Replies
View Related
Mar 25, 2010
I want to install ubuntu 9.10 on my HP nx9420. I left 48GB of unallocated space in between of windows and hp recovery partition. I attached screenshot of GParted. I need to make /dev/sda7 the home partition.
View 3 Replies
View Related
May 11, 2010
I am trying to install Ubuntu 10.04 on my Desktop and I am unable to see any partitions when trying to install I also checked to see if the partition manager would be able to see them and no luck there either.I already have windows xp and OpenSuse installed on the hard drive.
View 8 Replies
View Related
Mar 30, 2011
I am trying to duel boot win 7 and ubuntu 10.10. I have been dealing with this all day and cant figure out what's is going on. I create the partitions in windows and then reboot using a CD but when I go to select a oartition ubuntu do sent see any partitions its a totally blank drive. I have even wiped the drive totally and tried fresh install of windows and then creating partitions', even booted into the live CD area and it still dosent see any partitions just a blank drive. What am I doing wrong, or what is going wrong to cause this?
Running windows 7 x64 trying to install 10.10 x64
View 9 Replies
View Related
May 24, 2010
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
View 8 Replies
View Related
Jul 12, 2010
I downloaded Ubuntu 10.04 desktop and burned the CD. I changed the boot order on my Dell Inspiron 8100 to search for CD first. On startup, I see it flash - ISO LINUX something ............ The light flashes on my CD drive for a minute or so. I see a little icon at bottom of screen with a stick figure of a man and something else for a few seconds, then I see a white cloud flash on the screen that reduces in size and disappears, after another minute or so of the drive light flashing everything stops and still a black screen. Then, I tried hitting escape key a couple of times and I heard a few seconds of jungle music. The drive light flashes again for a while but nothing else happens. It seems like it's almost there, but not making it all the way for some reason.
By the way, if it matters, my Dell hard drive is partitioned to C: and D: I thought it would run a little faster that way, but not really noticable. I have most everything on C: right now. I hope to install side by side as I have a couple of applications I need Windows for, but would like to use Ubuntu for everything else. More questions about that later, on getting it to boot from the CD?
Since posting the above earlier under Dell, I have been able to boot from a borrowed 9.04 disk okay. And, was able to boot another computer with the 10.04 disk that I burned. The disk is apparently good, so why doesn't 10.04 work and 9.04 does?
View 2 Replies
View Related
Oct 14, 2010
I've been trying for three days to install Ubuntu 10.10 on a Dell GX240, with no luck. Each and every time, I boot from the Live CD and get as far as the language selection screen. I click "Forward," and the little gearwheel spins forever. Or until I power the machine down, whichever comes first. The BIOS is at its latest level (A05), and it's in original factory configuration -- I haven't made any modifications to it. I've also tried booting into "Try Ubuntu without installing," and running "Install Ubuntu" from within that environment, with the same non-results.
After a minute or so, the machine becomes completely unresponsive and I have to power down and start all over again. I've done a lot of prowling the web to find answers, most of which recommend adding "acpi=force" to the boot options. Unfortunately, that doesn't work for me. Nor have any of the various acpi/apic options. I don't think this is a hardware problem, since I am able to install and run XP on this machine without any problems whatever.
Specs for the machine are:
256M memory, at 133Mhz
CPU speed 1.7 GHz, Pentium 4
View 4 Replies
View Related
Mar 22, 2011
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
[Code]....
View 9 Replies
View Related
Feb 24, 2010
I'm trying to install Ubuntu 9.10 on a Asus P5KPL-VM mainboard. However the installation doesn't recognize my partitions. If I just boot Ubuntu the partitions are recognized with GParted and by just mounting them and browsing in file explorer. I'm using a SATA disk. I've tried boot option pci=nommconf irqpoll as found in this thread [URL] with no success.
View 2 Replies
View Related
May 2, 2010
trying to install 10.04, once i reach the dialog where i'm supposed to select partitions for mount/install, the installer reports my HDD is empty. it wants to create a partition table and proceed from there.in fact, my 1TB disk is 50% full and contains 10 partitions, including /boot /home, swap (which i wanna reuse) and 2 other OS partitions. these partitions do show up when running nautilus in 10.04 live, also "fdisk -l" shows them - the installer does not.
View 9 Replies
View Related
Mar 3, 2010
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
Code:
sudo fdisk -lu
sudo sfdisk -d
sudo parted /dev/sda print
and have received the following output:
Code:
ubuntu@ubuntu:/mnt$ sudo fdisk -lu
omitting empty partition (5)
Disk /dev/sda: 60.0 GB, 60011642880 bytes
[code]....
View 3 Replies
View Related
Feb 9, 2011
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies
View Related
Jan 9, 2010
I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
View 3 Replies
View Related
Feb 1, 2010
I am trying to install ubuntu server 9.10 on two dell poweredge 2550 servers that I have at work and I can't get the install to complete on either. I saw some posts somewhere saying that it could be bad memory in the computers so I even put brand new memory in each, which needed upgraded anyway but the install still fails.The install usually hangs when trying to detect network drivers and it also hangs on some other file (I forget now). I remember I had an older version of linux on one of them before. The install says the file is corrupted on the cd. I have burned multiple cd's in different drives on different computers using the lowest speed on all of them, and all install attempts fail. I can even take the exact same cd's and install in vmware on my mac so I know for a fact the cd's are fine. What makes me more confused is that I can install windows server 2003 without a hitch on both the servers I am trying to install Ubuntu on.
View 3 Replies
View Related
Feb 12, 2010
I am trying to install ubuntu 8.04 general desktop flavour in dell poweredge 2650, but it is not working..doesnt ubuntu 8.04 supports installation in a dell poweredge 2650..if not so thn what can be done for that..any other latest version which does so??
View 2 Replies
View Related
Feb 23, 2010
this is my first post sorry if im not clear OK i downloaded Ubuntu 9.1 32bit burned it to a CD and popped it in my dell latitude c600 i was going to set it up to dual boot with xp i already have 2 partions so every thing was ready
i hit install and saw a Ubuntu symbol fading in and out after that i got a whole heap of i/o errors ranging from 350 to 500 for the first number, then a bit later it loaded up the busy cursor for Ubuntu on a black screen it then changed to a cross outline and no matter how long i let i go for i do not change at all off that the disc isn't the problem because it works on my desk top live and install
View 2 Replies
View Related
Aug 20, 2010
I am trying to install Ubuntu 10.04 on a dell Inspiron laptop. When I choose the install option in the boot menu it loads my to a log in screen. but Ubuntu has never been installed in my laptop.
View 5 Replies
View Related
Oct 25, 2010
I am attempting to load 10.10-i386 on a Dell Inspiron. I have created my boot CD and all works fine with the install manager until it gets to the "Who are you?" page. It will not let me advance past this page. I am a complete rookie on Ubuntu and Linux OS.
View 5 Replies
View Related
Nov 9, 2010
Followed all the steps to install the Netbook Edition. Boot up on Live USB worked great, install went thru without a hitch. Changed the BIOS settings to boot on the SSD HD. Unfortunately, after th BIOS splash screen, all I get is a blinking cursor on the upper-left corner of the screen. I suspect my SSD is starting to fail.
View 2 Replies
View Related
Apr 13, 2011
im trying to install ubuntu 10.10 on a dell precision m2400.The problem is that it goes into the "ubuntu" logo and it reads the cd... and nothing happens, it never leaves that screen
View 9 Replies
View Related
May 1, 2011
Just installed 11.04. Before install, during live cd preview, it detected my dell wireless card and offered to install a Broadcom (as I remember) proprietary driver. However, after a proper install, it did not make the same offer and left no wireless available.
View 4 Replies
View Related
Jul 6, 2011
I just installed 10.04 on a Dell Dimension T7500. I first set up linux partitions following first FAT16 (Dell Utilities) and second FAT32 (labeled OS) partitions. The installer suggested there was no OS when I was installing Ubuntu 10.04. After restart I see that the first option in boot order is "Onboard or USB CDROM drive". But Ubuntu never booted. I then changed boot order to first look in ID00 LUN0 ATA. Same thing..no boot of Ubuntu. On the other machines on which I've installed Ubuntu I have dual boot with Windows and have GRUB installed. So....how best to set this up and find out if I have a workable OS?
View 8 Replies
View Related
May 1, 2010
I'm currently running a Ubuntu 9.10 64bit machine with one of those 2TB WD disks that does have 4KB blocks.Unfortunately the current partition layout is misaligned, so I plan to back up my home directory and start fresh with a 10.04 install, trying to make the partitions aligned as suggested here:what I'm wondering is, does the 10.04 partitioning program take care of the alignment today or I have to resort doing manual partitioning with a separate tool?
View 1 Replies
View Related
