Ubuntu Installation :: 9.10 To 10.04 PostFix Has Stopped Delivery Email To Users
Jun 19, 2010
After upgrading from a working 9.10 system to 10.04 Postfix has stopped delivery email to users. Sending email is fine and IMAP(s) and POP are working fine but receiving messages now get the follwing message
postfix/pipe[14331]: 65B941B61F0: to=<me@fred.com>, relay=dovecot, delay=1081, delays=1081/0.02/0/0.1, dsn=4.3.0, status=deferred (temporary failure) Using Postfix with Dovecot, MySQL & Amavis plus spamassasin
Does anyone have any idea what the upgrade process may of changed in the upgrade none of the conf file were replaced during the upgrade and only one parameter caused a issue for Dovecot after the upgrade "ssl_disable = no" after disabling this dovecot started
View 1 Replies
ADVERTISEMENT
Jul 12, 2011
I am having problem to collecting email from remote POP3 (all the emails for a domain is stored here) and distribute it after collecting to several users defined to Linux server. I have install postfix in Linux server for email distribution.
View 3 Replies
View Related
Jun 14, 2011
I have installed ubuntu 10.04.2 LTS and followd all the steps from the tutorial from [URL], postfix and dovecot works fine ...but ...is there any way to create email accounts (postfix account) without creating linux accounts for each mail account ?
View 4 Replies
View Related
Apr 13, 2011
I configured a Postfix Server to relay the messages to an Exchange Server. To keep it simple I configured all my users locally and I setup local .forward files in their home folders, specifying their local Exchange address.
Everything seemed to work fine (for years now), until I upgraded postfix in October, 23rd 2010.
Alas, lately I noticed that, since then, even if I just realized it now, sometimes the server seems not to use the .forward file and tries to use the local delivery using cyrus, which does not find a local mail folder (obviously, since I never created them as I didn�t want to) and replies to the sender with a "550-Mailbox unknown" error. Today I enabled the "-v" mode for "local" in master.cf the debugging the problem a bit better, to see what's the problem.
If I was sure about the problem being the postfix version (2.3.3, which is way too old now!), I'd give it a try and substitute it with the latest 2.8.2 (even if the server is a production server and is almost untouchable).
Following the error and my main.cf and master.cf setup files:
View 10 Replies
View Related
Feb 11, 2010
My EeePC used to be called 'machine', but some time ago I renamed it 'deimos'. There's been no problem with this for ages; but today I got an email 'Delivery Status Notification (Failure)' - because of a failed job, Anacron had tried to send a message to 'root@machine'. I've checked /etc/hosts and /etc/hostname, and in both locations the computer's name is correctly configured as 'deimos'. Where else should I look?
View 1 Replies
View Related
Oct 30, 2009
I dont know why, but my postfix dont delivery local users, the virtual users works fine.
This is my main.cf:
When i try echo "Test" | mail -s Test root ; tail -f /var/log/maillog | grep "root" i see this error:
View 1 Replies
View Related
May 24, 2010
I'm running postfix with virtual domains and want to modify the delivery path. Right now, I have one path for each user that's found with a database lookup.Before mail hits Postfix, it will have an x-spam-header: yes/no/uncertain field. When mail with x-spam-header: yes the lookup for the path would return /var/mail/domain/username/.Inbox/.spam.
What I think I'd like to do is parse the x-spam-header value in postfix, populate a variable, then use the variable to modify the path lookup in the database. header_checks has a FILTER option, but that's just beyond my skillset at the moment.Or, maybe I'm better off modifying the path with a procmail recipe? Currently, my mailbox_command = procmail -a "$EXTENSTION"
View 6 Replies
View Related
Aug 31, 2010
I am setting up an FC7 box to replace a currently dying server and I'm having an issue with the mail setup. I am using sendmail and dovecot and system users for credentials. I won't include all of their configurations, because that would get long, but I can copy and paste any sections if they are needed.
The problem is all mail is being delivered to the root mailbox in /var/spool/mail/. I setup a laptop on a local network with the server to test things. And just brought up Evolution with one of my test accounts. I was able to authenticate and tried to send a test email to myself. The email went out fine but did not come back in.
View 3 Replies
View Related
Jun 9, 2010
The problem is to make sendmail use different LDA for diferent users in the same domain. For example, deliver bob@some.domain with procmail and genry@some.domain with mail.local.
View 1 Replies
View Related
Dec 31, 2009
I have an email setup where all of the emails from our email host is downloaded to our Linux server using Fetchmail. Then some of the incoming emails are sent to an MS exchange server (server1.domain.com) using Postfix. What i want to do is to send a copy of all emails to Another server (server2.domain.com) for redundancy.Can postfix be configured to send copies out to both?
View 1 Replies
View Related
Feb 25, 2011
I recently moved over user from an old box running postfix(v 2.0.16) over to rhel 6 running postfix (v mail_version = 2.6.6). ive tried to make sure all the files are of correct permissions and that the main.cf file is configured corectly. However there is something wrong as when i run postfix: service postfix server i get no error but when checking the status:service postfix status i get: master dead but pid file exists Looking into /var/log/mailog i find this line being the issue:
Feb 25 16:24:39 puny1 postfix/master[3517]: fatal: fifo_listen: create fifo public/pickup: Permission denied
I gather this is a file permission issue and ive tried to make sure the public folder in /var/spool/postfix is correctly set but still no avail.
View 2 Replies
View Related
Dec 3, 2009
Im pretty sure this is trivial to config, but I havent had any luck searching on google.My situation is: I want to forward any emails sent to my domain to another account. So:
Code:
root@domain -> another_acc
any_other_system_user@domain -> another_acc
any_unknown_user@domain -> another_acc
View 3 Replies
View Related
Jan 30, 2010
Working on ubuntu server for 1st time and need to create a new email address.The server has postfix
View 4 Replies
View Related
Jan 27, 2011
I'm running ubuntu 10.04 as a server that hosts a website and our email. I set up the email (Postfix) to work with Dovecot to enable IMAP and POP support.The mails can be retrieved and sent through this server with no hassles. We just have an issue that all emails sent via a client to any other address (be it on the same domain or not) will return to the inbox of that client.So basically, I open MS Outlook. Click new message and send it off to my GMail address. After I send it, it pops into my inbox on Outlook (stating that it came from me). The intended recipient also gets the message.
View 2 Replies
View Related
Jul 24, 2010
Currently i'm figuring out how to send email notifications to users when services went down in Nagios. I know i need to install and configure Postfix, which i did already. I assume that when i configured to point it to "Satellite mail system" is the correct one instead of other things like "Internet.." etc. So the configurations is when you have installed the Postfix and there would pop a lot of questions right? Other than that, what have i missed?
Oh ya, i remember something. Hmm. I do not have any so-called real smtp server so would that be alright? I heard that installed and getting the Postfix running would be enough as it serves as a MTA (mail transfer agent). So if i do not have any smtp server, the relay host= ' ' what should i put it as?
View 5 Replies
View Related
Apr 8, 2010
I recently Re-did my Postfix configuration using [URL] The thing that that guide did not tell me was how to get email to forward to other accounts or if I can point multiple accounts to the same place like here:
[Code]...
finally I tried putting a .forward record in /home/vmail/domain.com/username directory which didn't work either.
View 1 Replies
View Related
Aug 9, 2010
what do I need to change in postfix/ dns to send email to one one of the email server hosted by 1and1.
I'm using zenoss to monitor system/ network and devices. I wanted to setup email notification , so I installed postfix. All works fine when I use my private account on yahoo or hotmail. but when I specify email account that is hosted by 1and1 I receive error 421. "
xxxxmyserver postfix/smtp[5399]: B0A5B22A06: to=<1and1emailaddress>, relay=mx00.1and1.co.uk[212.227.15.169]:25, delay=0.8, delays=0.04/0.02/0.62/0.12, dsn=4.0.0, status=deferred (host mx00.1and1.co.uk[212.227.15.169] said: 421 invalid sender domain 'xxxxmyserver' (misconfigured dns?) (in reply to RCPT TO command))
View 1 Replies
View Related
Nov 20, 2010
I installed Postfix, Amavis-new + Spamassassin + Clamav, Dovecot, and SquirrelMail today, using the Ubuntu guides for each. I have 10.04 LTS Server. My PHP scripts can send email, but when I tried to log into Squirrelmail, I couldn't. Here is what my error log produced (the server name and user name have been changed) :
Code:
myserver dovecot: imap-login: Login: user=<username>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
myserver dovecot: IMAP(username): opendir(/home/username/Maildir) failed: Permission
[code].....
View 1 Replies
View Related
Apr 12, 2011
I have a very basic install of dovecot and postfix on the latest version of Ubuntu server. This is an internal only email server with internal only DNS. I can send email via clients and check said emails via the command line when logged in as the appropriate user. I cannot for the life of me check said emails via SquirrelMail on the server nor using IMAP clients. I have no idea where to look and I can't find a basic tutorial for the life of me. Where should I start?
View 9 Replies
View Related
Sep 13, 2010
I am trying to setup a simple SMTP server to relay scanned documents from a Xerox machine to email addresses. Unfortunately the Xerox machine doesn't support TSL or SSL so sending mail over port 25 on gets blocked. I have setup postfix on a desktop running Fedora 13 and have been able to set it up to forward the mail onto the correct server (gmail for example). My question is, how do I get the server to encrypt the emails (scanned documents) when sending them over the internet?
I have tried adding:
Code:
smtpd_use_tls = yes
smtpd_tls_cert_file = /etc/postfix/smtpd.cert
smtpd_tls_key_file = /etc/postfix/smtpd.key
But when I look at the wireshark capture of the sending I can read my test message in plain text.
View 2 Replies
View Related
Apr 26, 2010
I have a server with an sms-terminal attached. There I use "gnokii" to send sms. Now I'm searching for a solution with postfix or something else to receive an email and resend the subject of this email as an sms with gnokii. I have already searched a lot. I found that I have to create a special "sms"-user and a .procmail / .forward-file. But I had no success with this solutions.
View 2 Replies
View Related
Dec 28, 2010
tell postfix to send email sent to one email address to another email address. What I really need to do is tell postfix that every email sent to [URL] and [URL] be sent to [URL] I tried transport maps like this: [URL] but that did not work. I then tried canonical maps like this:
recipient_canonical file:
/^((dbsupport|helpdesk).*)thisdomain[.]com$/ admins@thatdomain.com
sender_canonical file:
/^(.*@).*thisdomain[.]com$/ ${1}thatdomain.com
but it did not work either. I am really exhausted and I need to find a solution for this one since it is my boss asking me to get this working. This is what if in /var/log/mail in box1:
Dec 28 16:10:25 box1 postfix/pickup[19291]: 54D258F726: uid=0 from=<root>
Dec 28 16:10:25 box1 postfix/cleanup[23489]: 54D258F726: message-id=<4D1A5241.mailIBZ11LRR6@box1.thisdomain.com>
[code]....
View 4 Replies
View Related
Feb 15, 2011
My Nagios email Notification is not working, I'm trying to setup external relay server using GMAIL. I'm also using dynamic IP.
Please see the test below:
Here is my PoSTFIX CONFIGURATION:
View 3 Replies
View Related
Sep 23, 2010
I don't have idea how could I create a script that will forward my email from postfix to a script automatically to sms gateway right now I can receive a mail from solarwinds and I'm done configuring my kannel sms gateway .Could anyway help me how could I send my email-> sms automatically using script?
View 1 Replies
View Related
Jun 1, 2011
recently i was raised my question about external and internal emailing using one domain name.Now i have another question about restriction.I can able to set email account and permit only local and external
now my question this kind of setup external and internal one thing i've noticed is that using prinzz1@domain.com(local only) was able to receive email from outside.is it possible to block all outside email if the prinzz1@domain.com is local only?
View 11 Replies
View Related
Jan 19, 2010
How to set outgoing mail limit? And what is the default value?
View 2 Replies
View Related
May 7, 2010
i can't receive outside emails on a postfix server. i was able to get it to send emails with help in this thread. i can telnet into it via localhost, but not via domain name.
View 8 Replies
View Related
May 13, 2010
I have an issue where postfix is setup to use dovecot auth and as far as I know it works, if i login using telnet to the mail server i can authorize myself y providing the base64 encoded user & password. so if i can login, why cant my email clients. have tried thunderbird and evolution. this is the mail.log relavant entries for sucessful login via telnet
[Code]...
Login by pop or imap works flawlessly that what i dont get. From what i see it SHOULD be working. It it changes things, im using postfixadmin, postfix, dovecot. passwords and info stored in mysql tables. passwords are md5 encrypted. I thought that may be the issue, but that dosnt make sence.
View 6 Replies
View Related
Nov 4, 2009
For legal reasons, I may soon be required to have the ability to provide a user's emails to authorities as part of a discovery action.Not just a copy of backup.I'm running postfix with dovecot on rhel5.I'd need to be able to produce emails sent and received in a given time frame by a given user.
View 1 Replies
View Related
Jan 22, 2011
mailman configured with postfix & dovecot on the same server. Postfix & dovecot configured using iredmail script. This situation is possibly caused by dovecot LDA but I do not know how to configure it to recognize mailman lists I'm using RHEL 5.5
Here's my configs:
/etc/postfix/main.cf
Code:
alias_database = hash:/etc/postfix/aliases
alias_maps = hash:/etc/postfix/aliases, hash:/etc/mailman/aliases
allow_min_user = no
biff = no
[code]....
View 2 Replies
View Related
