I don't have idea how could I create a script that will forward my email from postfix to a script automatically to sms gateway right now I can receive a mail from solarwinds and I'm done configuring my kannel sms gateway .Could anyway help me how could I send my email-> sms automatically using script?
View 1 Replies
I have an email setup where all of the emails from our email host is downloaded to our Linux server using Fetchmail. Then some of the incoming emails are sent to an MS exchange server (server1.domain.com) using Postfix. What i want to do is to send a copy of all emails to Another server (server2.domain.com) for redundancy.Can postfix be configured to send copies out to both?
View 1 Replies View RelatedI recently Re-did my Postfix configuration using [URL] The thing that that guide did not tell me was how to get email to forward to other accounts or if I can point multiple accounts to the same place like here:
[Code]...
finally I tried putting a .forward record in /home/vmail/domain.com/username directory which didn't work either.
Im pretty sure this is trivial to config, but I havent had any luck searching on google.My situation is: I want to forward any emails sent to my domain to another account. So:
Code:
root@domain -> another_acc
any_other_system_user@domain -> another_acc
any_unknown_user@domain -> another_acc
I am trying to find a way to tell postfix to forward all emails from
dbsupport@thisdomain.com
and
helpdesk@thisdomain.com
to
be sent to admins@thatdomain.com, but it is not working. I am trying transport maps. The content of my transport file is:
Quote:
helpdesk@thisdomain.com smtp:admins@thatdomain.com
Quote:
dbsupport@thisdomain.com smtp:admins@thatdomain.com
Both [URL] and [URL] are on box1 as an alias in the /etc/alias file like this:
root: helpdesk@thisdomain.com
root: dbsupport@thisdomain.com
how to get this working?
My company is changing it's mail subdomain...Example: [URL]. I wanted to build a sendmail box up to handle this until all the sending parties get the new address. I'm sure it's in the rewrite hearder part of sendmail.cf but I just don't understand how to doit.
View 2 Replies View Relatedeasier way to forward email, in postfix, from a user to one domain for the user without listing every domain and user name? Example:send all of user joe's email to joe@somewhere, in which there are mulitple domains other than "somewhere".
Usual Given Example-
/etc/postfix/virtual:
joe@example.com joe@somewhere
jane@example.com jane@somewhere-else
[code]....
I'm looking for an easier way to forward email, verses having (ex) 50 different lines for 5 users and 10 domains.
Currently i'm figuring out how to send email notifications to users when services went down in Nagios. I know i need to install and configure Postfix, which i did already. I assume that when i configured to point it to "Satellite mail system" is the correct one instead of other things like "Internet.." etc. So the configurations is when you have installed the Postfix and there would pop a lot of questions right? Other than that, what have i missed?
Oh ya, i remember something. Hmm. I do not have any so-called real smtp server so would that be alright? I heard that installed and getting the Postfix running would be enough as it serves as a MTA (mail transfer agent). So if i do not have any smtp server, the relay host= ' ' what should i put it as?
recently i was raised my question about external and internal emailing using one domain name.Now i have another question about restriction.I can able to set email account and permit only local and external
now my question this kind of setup external and internal one thing i've noticed is that using prinzz1@domain.com(local only) was able to receive email from outside.is it possible to block all outside email if the prinzz1@domain.com is local only?
How to set outgoing mail limit? And what is the default value?
View 2 Replies View RelatedI am using postfix and dovecot installed in one machine running linux centos 5.4 and I have two lan card eth0 and eth1
the eth0 is my IP from ISP
the eth1 is my internal IP
Now since my postfix and dovecot are started without any errors what I mean is. I can able to send in yahoo,gmail,etc... and also i can recieve email from outside. My question is how can I restrict this email address prinzz@prinzz.com denied for outside but can send and recieve only in internal while this prinzz2@prinzz.com is allow to send and receive outside and inside.
I've just setup a new Ubuntu 10.04 LTS server on linode for myself. Followed an excellent instruction at: here to finish the installation of some basic stuff including postfix.
I am trying to figure out a way to send an email to my gmail address with an attachment, but cannot find how. Already confirmed that email can reach my gmail account.
In the end I have to use mutt to send the email with attachments, probably SendEmails will also do well, but I am wondering how to do the same thing in postfix from command-line?
I happened to know my incoming and outgoing emails are being monitored by my superior. Just wondered, can i check from the mail header to find out all my emails (incoming/outgoing) are automatically being cc to another email account? We're running mail server using postfix.
View 5 Replies View RelatedI've been trying to send mail to email account even after installing postfix but am not able to do so.My distro is Centos 5.4. I followed the Centos user guide to install and configure postfix into the server,
Code:
http://wiki.centos.org/HowTos/postfix
but still didn't receive any email.
My server is running Centos 5. I need to forward and incoming email to a php script.e.g.myname@mysite.com forwarded to /home/path/script.php
View 14 Replies View RelatedIn transparent gateway mode can postfix forward single message to two different destinations with the help of transport file?
View 2 Replies View RelatedI have nagios running fine on Linux. I would like my nagios system to forward all the emails to our internal SMTP gateway. How can I configure this? Is it necessary to run sendmail on linux to achieve this?
View 5 Replies View RelatedWe have MS Exchange email server with postfix/amavis on FreeBSD as proxy for anti-spam and anti-virus. We use our own developed CRM and trying to implement such functionality that when CRM manager send email to CRM client or vice versa through email client like Outlook (no plugins for CRM) this message would be shown in CRM. There is already a solution to parse emails from specific emailbox and show it in CRM.
What I need is to create postfix email filter to check if sender email is in file CRM_managers_emails and recipient email is in file CRM_clients_emails then forward that email to [URL] Filter should check both incoming and outgoing messages. I will auto generate CRM_managers_emails and CRM_clients_email files containing all such emails taken from CRM database. I know i should use something like Postfix After-Queue Content Filter but most of examples are for blocking emails.
I am trying to setup a simple SMTP server to relay scanned documents from a Xerox machine to email addresses. Unfortunately the Xerox machine doesn't support TSL or SSL so sending mail over port 25 on gets blocked. I have setup postfix on a desktop running Fedora 13 and have been able to set it up to forward the mail onto the correct server (gmail for example). My question is, how do I get the server to encrypt the emails (scanned documents) when sending them over the internet?
I have tried adding:
Code:
smtpd_use_tls = yes
smtpd_tls_cert_file = /etc/postfix/smtpd.cert
smtpd_tls_key_file = /etc/postfix/smtpd.key
But when I look at the wireshark capture of the sending I can read my test message in plain text.
I have a server with an sms-terminal attached. There I use "gnokii" to send sms. Now I'm searching for a solution with postfix or something else to receive an email and resend the subject of this email as an sms with gnokii. I have already searched a lot. I found that I have to create a special "sms"-user and a .procmail / .forward-file. But I had no success with this solutions.
View 2 Replies View Relatedtell postfix to send email sent to one email address to another email address. What I really need to do is tell postfix that every email sent to [URL] and [URL] be sent to [URL] I tried transport maps like this: [URL] but that did not work. I then tried canonical maps like this:
recipient_canonical file:
/^((dbsupport|helpdesk).*)thisdomain[.]com$/ admins@thatdomain.com
sender_canonical file:
/^(.*@).*thisdomain[.]com$/ ${1}thatdomain.com
but it did not work either. I am really exhausted and I need to find a solution for this one since it is my boss asking me to get this working. This is what if in /var/log/mail in box1:
Dec 28 16:10:25 box1 postfix/pickup[19291]: 54D258F726: uid=0 from=<root>
Dec 28 16:10:25 box1 postfix/cleanup[23489]: 54D258F726: message-id=<4D1A5241.mailIBZ11LRR6@box1.thisdomain.com>
[code]....
My Nagios email Notification is not working, I'm trying to setup external relay server using GMAIL. I'm also using dynamic IP.
Please see the test below:
Here is my PoSTFIX CONFIGURATION:
i can't receive outside emails on a postfix server. i was able to get it to send emails with help in this thread. i can telnet into it via localhost, but not via domain name.
View 8 Replies View RelatedI have an issue where postfix is setup to use dovecot auth and as far as I know it works, if i login using telnet to the mail server i can authorize myself y providing the base64 encoded user & password. so if i can login, why cant my email clients. have tried thunderbird and evolution. this is the mail.log relavant entries for sucessful login via telnet
[Code]...
Login by pop or imap works flawlessly that what i dont get. From what i see it SHOULD be working. It it changes things, im using postfixadmin, postfix, dovecot. passwords and info stored in mysql tables. passwords are md5 encrypted. I thought that may be the issue, but that dosnt make sence.
For legal reasons, I may soon be required to have the ability to provide a user's emails to authorities as part of a discovery action.Not just a copy of backup.I'm running postfix with dovecot on rhel5.I'd need to be able to produce emails sent and received in a given time frame by a given user.
View 1 Replies View Relatedmailman configured with postfix & dovecot on the same server. Postfix & dovecot configured using iredmail script. This situation is possibly caused by dovecot LDA but I do not know how to configure it to recognize mailman lists I'm using RHEL 5.5
Here's my configs:
/etc/postfix/main.cf
Code:
alias_database = hash:/etc/postfix/aliases
alias_maps = hash:/etc/postfix/aliases, hash:/etc/mailman/aliases
allow_min_user = no
biff = no
[code]....
I have postfix sort of working correctly. postfix can send email to the internet but it doesn't want to send email to my local exchange server. What I need is for postfix to send emails directed to @xyz.com to my exchange server instead of itself.
My setup
mail.xyz.com - exchange 2003 server
www.xyz.com - centos 5.3 server with postfix
www.xyz.com can send emails to my hotmail.com account so that part works correctly. www.xyz.com can't send email to username@xyz.com. postfix seems to be delivering the email to itself and not the exchange server.
How can I tell postfix to send the @xyz.com emails to my exchange server?
Here is a sample of my /var/log/maillog
Jul 22 15:43:43 list postfix/smtpd[9802]: D63168604A3: client=localhost.localdomain[127.0.0.1]
Jul 22 15:43:53 list postfix/cleanup[9805]: D63168604A3: message-id=<20090722204343.D63168604A3@www.xyz.com>
[Code].....
How can I send email outside my LAN using postfix? Actually, I can received email from outside like yahoo. hotmail etc.. But when I am trying to send outside in my mail server here is the error I got..
Jun 2 21:19:51 microtontech postfix/smtp[4434]: connect to k.mx.mail.yahoo.com[98.139.54.60]: Connection timed out (port 25)
Jun 2 21:20:10 microtontech postfix/smtp[4435]: connect to
[code]....
I try to telnet yahoo.com and smtp.pldtdsl.net 25 here are the result, but when I try to telnet smtp.pldtdsl.net its showing trying only.. I checked if my ISP is blocking port 25 isn't. (I forgot what is the website I used to check if my ISP port 25 is block) I try already to used in my relayhost the [URL] but the email I sent still bouncing..But I remember last time when I was installed Hmailserver in my Win2K3 machine I sent email outside but I cannot received..
[code]....
I have been running an email server on a Red Hat 9 system for 5 years, and wanting to upgrade it to the latest Fedora OS. A few days ago it crashed. The server is running Fedora 11 (up-to-date). Clients are Fedora 11 and Windows XP machines using Thunderbird for accessing email. The server is running Postfix and Dovecot. Within my local network I can send and receive emails. I can also send email to addresses outside of my local network. The only problem is that I cannot receive any email from outside the local network. I cannot think of anything aside from my firewall (iptables) or postfix config that could be causing the problem.
Below are my iptables file, and the postfix main.cf changes that I have made.
Iptables (the same file I was using on Red Hat version 9 with one minor deprecated syntax changed):
*nat
:PREROUTING ACCEPT [22:1894]
:POSTROUTING ACCEPT [14:840]
:OUTPUT ACCEPT [17:1356]
-A POSTROUTING -o eth0 -j MASQUERADE
COMMIT
*filter .....
Working on ubuntu server for 1st time and need to create a new email address.The server has postfix
View 4 Replies View Related
