I have a server with an sms-terminal attached. There I use "gnokii" to send sms. Now I'm searching for a solution with postfix or something else to receive an email and resend the subject of this email as an sms with gnokii. I have already searched a lot. I found that I have to create a special "sms"-user and a .procmail / .forward-file. But I had no success with this solutions.
View 2 RepliesI upgraded my home server from openSUSE 10.3 to 11.2. From that day, postfix rejects every email I try to receive by using fetchmail. The main.cf file was unchanged after the upgrade, postfix starts correctly, but it does not accepts emails! The errors I receive are:
Code:
NOQUEUE: reject: RCPT from localhost[::1]: 504 5.5.2 <localhost>: Helo command rejected: need fully-qualified hostname; from=<> to=<correctuser@somedomain.com> proto=SMTP helo=
[code]....
I am running in a problem that i have put a postfix regex which needs to discard emails having no subjects, while it works fine for gmail,hotmail and other domains but it does not work for [URL] ultimate reason behind this is because yahoo does not send subject line if subject is not included in email.
View 3 Replies View RelatedI have an email setup where all of the emails from our email host is downloaded to our Linux server using Fetchmail. Then some of the incoming emails are sent to an MS exchange server (server1.domain.com) using Postfix. What i want to do is to send a copy of all emails to Another server (server2.domain.com) for redundancy.Can postfix be configured to send copies out to both?
View 1 Replies View RelatedIm pretty sure this is trivial to config, but I havent had any luck searching on google.My situation is: I want to forward any emails sent to my domain to another account. So:
Code:
root@domain -> another_acc
any_other_system_user@domain -> another_acc
any_unknown_user@domain -> another_acc
11.2 Old?? camera phone-just want the pics into my PC, have CA-50 USB cable.
View 2 Replies View RelatedI've been trying for a long time to send emails via gmail, but without any success.
I always got the following error: "Must issue a STARTTLS command first"
I then added the following to my main.cf file: smtp_enforce_tls = yes
I now get this when running postqueue -p
(TLS is required, but our TLS engine is unavailable)
How to set up gmail, but none worked.
This is what I added to main.cf:
I habe installed openSuSE 11.1 in textmode as a mailserver. Postfix running fine. I got policyd 2.x from sourceforge and installed it. Database is running ok web gui is running ok, but I can't start policyd/cluebringer as there are some perl modules needed. I found most of the but i am still missing one: perl(cache::FastMmap). I search any repositories I found, nor could get some source to compile.
Does anyone out there has running openSuSE 11.1 with postfix and cluebringer or can anyone give me some hint where to get that perl module for 11.1 or 11.2, upgrade from 11.1 to 11.2 would be no problem for me.
can't send or recieve E-mail. Running postfix , thunderbird squirrel mail. Thunderbird and squirrelmail connect to server but am unable to send or recieve. recieve connection refuses 111 can't open smtp stream. I seen a post mentioning port 25 : 587 for squirrellmail but I do not have exim.conf to update daemon_smtp_ports= 25 : 587 is this located in another file for suse 11.2?
View 3 Replies View RelatedI am brand new to sendmail. I have a web application running on APACHE2. I'm told that it uses a PHP mail function to send emails for notifications. I configured my php.ini to use sendmail by adding the following line:
sendmail_path= /usr/sbin/sendmail -t -i (I've tried it without the i as well)
As far as the sendmail configuration is concerned, I used the GUI interface provided in the KDE environment (labeled Mail Transfer Agent). I inputted my outgoing mail server's IP address and login information. I also unchecked TLS since my mail server does not use that.
The problem is that no email ever gets sent. The web application states that the email was successfully sent. But I think its because it hands the email to PHP (leaving the responsibility to PHP)...then it believes the email is sent. My mail server uses plain text for authentication. Im not doing anything special with it. I told my mail server to accept connections from my linux box. I also checked my mail server's logs and see that no record of any connection from my linux server is logged.
So it seems my linux server isnt even communicating with my mail server. Both boxes are on the same network. My linux box can ping my mail server just fine. Firewall is disabled. How do I correctly configure sendmail to use an outgoing SMTP server to send emails. And how do I verify that setting works without using the web application I installed? (I want to verify whether or not the issue is with sendmail or the web application). Where do I find sendmail's logs so I can check to see why it's not hitting my mail server?
I have setup up an Opensuse as a simple we/application server.It handles requests for various things and will need to send out email on occasion for things like password reset requests, information / warnings etc. etc.This is a standard OPenSuse 11.x install with defaults so it comes with Postfix as the mta.I do not want a mail server I just want to send out via my clients mail server which is hosted exchange rackspace, which simply requires SMTP auth to do so.What would be the proper way to do this so ALL e-mail send from this machine, regardless of account like WWWRun or when logged in and sending from the command line has the same sender all the time.
View 6 Replies View RelatedCurrently i'm figuring out how to send email notifications to users when services went down in Nagios. I know i need to install and configure Postfix, which i did already. I assume that when i configured to point it to "Satellite mail system" is the correct one instead of other things like "Internet.." etc. So the configurations is when you have installed the Postfix and there would pop a lot of questions right? Other than that, what have i missed?
Oh ya, i remember something. Hmm. I do not have any so-called real smtp server so would that be alright? I heard that installed and getting the Postfix running would be enough as it serves as a MTA (mail transfer agent). So if i do not have any smtp server, the relay host= ' ' what should i put it as?
I'm facing the best problem which I ever had, where is the previous vendor don't do any documentation. So my task actually do some enhancement on the filtering solution actually, but what I found out is like this..
here my cat /var/log/maillog
Jan 31 09:47:02 mws postfix/cleanup[11028]: 998464290DB: hold: header Received: from mail.jkm.gov.my (webmail.jkm.gov.my [10.0.223.2])??by webmail.jkm.gov.my (Postfix) with ESMTP id 998464290DB??for <hidzuan@gmail.com>; Mon, 31 Jan 2011 09:47:02 +0800 (MYT) from webmail.jkm.gov.my[10.0.223.2]; from=<e1@jkm.gov.my> to=<hidzuan@gmail.com> proto=ESMTP helo=<mail.jkm.gov.my>
[Code].....
I want postfix to send me the root mail to an external account, but I never do it and I don't know how to do it, anyone can explain me how to do it?
View 1 Replies View RelatedI am trying to setup a simple SMTP server to relay scanned documents from a Xerox machine to email addresses. Unfortunately the Xerox machine doesn't support TSL or SSL so sending mail over port 25 on gets blocked. I have setup postfix on a desktop running Fedora 13 and have been able to set it up to forward the mail onto the correct server (gmail for example). My question is, how do I get the server to encrypt the emails (scanned documents) when sending them over the internet?
I have tried adding:
Code:
smtpd_use_tls = yes
smtpd_tls_cert_file = /etc/postfix/smtpd.cert
smtpd_tls_key_file = /etc/postfix/smtpd.key
But when I look at the wireshark capture of the sending I can read my test message in plain text.
tell postfix to send email sent to one email address to another email address. What I really need to do is tell postfix that every email sent to [URL] and [URL] be sent to [URL] I tried transport maps like this: [URL] but that did not work. I then tried canonical maps like this:
recipient_canonical file:
/^((dbsupport|helpdesk).*)thisdomain[.]com$/ admins@thatdomain.com
sender_canonical file:
/^(.*@).*thisdomain[.]com$/ ${1}thatdomain.com
but it did not work either. I am really exhausted and I need to find a solution for this one since it is my boss asking me to get this working. This is what if in /var/log/mail in box1:
Dec 28 16:10:25 box1 postfix/pickup[19291]: 54D258F726: uid=0 from=<root>
Dec 28 16:10:25 box1 postfix/cleanup[23489]: 54D258F726: message-id=<4D1A5241.mailIBZ11LRR6@box1.thisdomain.com>
[code]....
My Nagios email Notification is not working, I'm trying to setup external relay server using GMAIL. I'm also using dynamic IP.
Please see the test below:
Here is my PoSTFIX CONFIGURATION:
I don't have idea how could I create a script that will forward my email from postfix to a script automatically to sms gateway right now I can receive a mail from solarwinds and I'm done configuring my kannel sms gateway .Could anyway help me how could I send my email-> sms automatically using script?
View 1 Replies View Relatedrecently i was raised my question about external and internal emailing using one domain name.Now i have another question about restriction.I can able to set email account and permit only local and external
now my question this kind of setup external and internal one thing i've noticed is that using prinzz1@domain.com(local only) was able to receive email from outside.is it possible to block all outside email if the prinzz1@domain.com is local only?
How to set outgoing mail limit? And what is the default value?
View 2 Replies View Relatedi can't receive outside emails on a postfix server. i was able to get it to send emails with help in this thread. i can telnet into it via localhost, but not via domain name.
View 8 Replies View RelatedI have an issue where postfix is setup to use dovecot auth and as far as I know it works, if i login using telnet to the mail server i can authorize myself y providing the base64 encoded user & password. so if i can login, why cant my email clients. have tried thunderbird and evolution. this is the mail.log relavant entries for sucessful login via telnet
[Code]...
Login by pop or imap works flawlessly that what i dont get. From what i see it SHOULD be working. It it changes things, im using postfixadmin, postfix, dovecot. passwords and info stored in mysql tables. passwords are md5 encrypted. I thought that may be the issue, but that dosnt make sence.
For legal reasons, I may soon be required to have the ability to provide a user's emails to authorities as part of a discovery action.Not just a copy of backup.I'm running postfix with dovecot on rhel5.I'd need to be able to produce emails sent and received in a given time frame by a given user.
View 1 Replies View Relatedmailman configured with postfix & dovecot on the same server. Postfix & dovecot configured using iredmail script. This situation is possibly caused by dovecot LDA but I do not know how to configure it to recognize mailman lists I'm using RHEL 5.5
Here's my configs:
/etc/postfix/main.cf
Code:
alias_database = hash:/etc/postfix/aliases
alias_maps = hash:/etc/postfix/aliases, hash:/etc/mailman/aliases
allow_min_user = no
biff = no
[code]....
I have postfix sort of working correctly. postfix can send email to the internet but it doesn't want to send email to my local exchange server. What I need is for postfix to send emails directed to @xyz.com to my exchange server instead of itself.
My setup
mail.xyz.com - exchange 2003 server
www.xyz.com - centos 5.3 server with postfix
www.xyz.com can send emails to my hotmail.com account so that part works correctly. www.xyz.com can't send email to username@xyz.com. postfix seems to be delivering the email to itself and not the exchange server.
How can I tell postfix to send the @xyz.com emails to my exchange server?
Here is a sample of my /var/log/maillog
Jul 22 15:43:43 list postfix/smtpd[9802]: D63168604A3: client=localhost.localdomain[127.0.0.1]
Jul 22 15:43:53 list postfix/cleanup[9805]: D63168604A3: message-id=<20090722204343.D63168604A3@www.xyz.com>
[Code].....
How can I send email outside my LAN using postfix? Actually, I can received email from outside like yahoo. hotmail etc.. But when I am trying to send outside in my mail server here is the error I got..
Jun 2 21:19:51 microtontech postfix/smtp[4434]: connect to k.mx.mail.yahoo.com[98.139.54.60]: Connection timed out (port 25)
Jun 2 21:20:10 microtontech postfix/smtp[4435]: connect to
[code]....
I try to telnet yahoo.com and smtp.pldtdsl.net 25 here are the result, but when I try to telnet smtp.pldtdsl.net its showing trying only.. I checked if my ISP is blocking port 25 isn't. (I forgot what is the website I used to check if my ISP port 25 is block) I try already to used in my relayhost the [URL] but the email I sent still bouncing..But I remember last time when I was installed Hmailserver in my Win2K3 machine I sent email outside but I cannot received..
[code]....
For about a week now I've been seeing mass attempts to relay through postfix and login to dovecot from the same 2 addresses, none are successful due to how postfix/dovecot are configured and I wouldn't be overly worried but my isp have picked up on it and are nagging at me
What ways do people go about just dropping connection attempts from offending addresses/ranges when stuff like that happens? An ideal thing would be something that detects repeated failed attempts from a host or range and subsequently ignore/ban them, perhaps for a specified length of time, something along the lines of denyhosts and fail2ban for ssh would be great Don't know if there's anything out there or just a plain tried and trusted method anyone might use for stuff like this, if not a hint on the most appropriate way to go about it 'manually' would do
I have been running an email server on a Red Hat 9 system for 5 years, and wanting to upgrade it to the latest Fedora OS. A few days ago it crashed. The server is running Fedora 11 (up-to-date). Clients are Fedora 11 and Windows XP machines using Thunderbird for accessing email. The server is running Postfix and Dovecot. Within my local network I can send and receive emails. I can also send email to addresses outside of my local network. The only problem is that I cannot receive any email from outside the local network. I cannot think of anything aside from my firewall (iptables) or postfix config that could be causing the problem.
Below are my iptables file, and the postfix main.cf changes that I have made.
Iptables (the same file I was using on Red Hat version 9 with one minor deprecated syntax changed):
*nat
:PREROUTING ACCEPT [22:1894]
:POSTROUTING ACCEPT [14:840]
:OUTPUT ACCEPT [17:1356]
-A POSTROUTING -o eth0 -j MASQUERADE
COMMIT
*filter .....
Working on ubuntu server for 1st time and need to create a new email address.The server has postfix
View 4 Replies View RelatedI'm running ubuntu 10.04 as a server that hosts a website and our email. I set up the email (Postfix) to work with Dovecot to enable IMAP and POP support.The mails can be retrieved and sent through this server with no hassles. We just have an issue that all emails sent via a client to any other address (be it on the same domain or not) will return to the inbox of that client.So basically, I open MS Outlook. Click new message and send it off to my GMail address. After I send it, it pops into my inbox on Outlook (stating that it came from me). The intended recipient also gets the message.
View 2 Replies View Related