Fedora :: F13 Get Postfix To Send Encrypted Email?
Sep 13, 2010
I am trying to setup a simple SMTP server to relay scanned documents from a Xerox machine to email addresses. Unfortunately the Xerox machine doesn't support TSL or SSL so sending mail over port 25 on gets blocked. I have setup postfix on a desktop running Fedora 13 and have been able to set it up to forward the mail onto the correct server (gmail for example). My question is, how do I get the server to encrypt the emails (scanned documents) when sending them over the internet?
I have tried adding:
Code:
smtpd_use_tls = yes
smtpd_tls_cert_file = /etc/postfix/smtpd.cert
smtpd_tls_key_file = /etc/postfix/smtpd.key
But when I look at the wireshark capture of the sending I can read my test message in plain text.
View 2 Replies
ADVERTISEMENT
Jul 24, 2010
Currently i'm figuring out how to send email notifications to users when services went down in Nagios. I know i need to install and configure Postfix, which i did already. I assume that when i configured to point it to "Satellite mail system" is the correct one instead of other things like "Internet.." etc. So the configurations is when you have installed the Postfix and there would pop a lot of questions right? Other than that, what have i missed?
Oh ya, i remember something. Hmm. I do not have any so-called real smtp server so would that be alright? I heard that installed and getting the Postfix running would be enough as it serves as a MTA (mail transfer agent). So if i do not have any smtp server, the relay host= ' ' what should i put it as?
View 5 Replies
View Related
Jun 2, 2011
How can I send email outside my LAN using postfix? Actually, I can received email from outside like yahoo. hotmail etc.. But when I am trying to send outside in my mail server here is the error I got..
Jun 2 21:19:51 microtontech postfix/smtp[4434]: connect to k.mx.mail.yahoo.com[98.139.54.60]: Connection timed out (port 25)
Jun 2 21:20:10 microtontech postfix/smtp[4435]: connect to
[code]....
I try to telnet yahoo.com and smtp.pldtdsl.net 25 here are the result, but when I try to telnet smtp.pldtdsl.net its showing trying only.. I checked if my ISP is blocking port 25 isn't. (I forgot what is the website I used to check if my ISP port 25 is block) I try already to used in my relayhost the [URL] but the email I sent still bouncing..But I remember last time when I was installed Hmailserver in my Win2K3 machine I sent email outside but I cannot received..
[code]....
View 3 Replies
View Related
Feb 8, 2011
I'm experimenting with with mail-servers now and I'm trying to configure postfix to send emails from one email(pop3 is gmail) to any email outside the local network. Server is Ubuntu 10.10 with the last updates.
View 1 Replies
View Related
Dec 11, 2010
I've just setup a new Ubuntu 10.04 LTS server on linode for myself. Followed an excellent instruction at: here to finish the installation of some basic stuff including postfix.
I am trying to figure out a way to send an email to my gmail address with an attachment, but cannot find how. Already confirmed that email can reach my gmail account.
In the end I have to use mutt to send the email with attachments, probably SendEmails will also do well, but I am wondering how to do the same thing in postfix from command-line?
View 3 Replies
View Related
Aug 9, 2010
what do I need to change in postfix/ dns to send email to one one of the email server hosted by 1and1.
I'm using zenoss to monitor system/ network and devices. I wanted to setup email notification , so I installed postfix. All works fine when I use my private account on yahoo or hotmail. but when I specify email account that is hosted by 1and1 I receive error 421. "
xxxxmyserver postfix/smtp[5399]: B0A5B22A06: to=<1and1emailaddress>, relay=mx00.1and1.co.uk[212.227.15.169]:25, delay=0.8, delays=0.04/0.02/0.62/0.12, dsn=4.0.0, status=deferred (host mx00.1and1.co.uk[212.227.15.169] said: 421 invalid sender domain 'xxxxmyserver' (misconfigured dns?) (in reply to RCPT TO command))
View 1 Replies
View Related
Jan 12, 2010
I've been trying to send mail to email account even after installing postfix but am not able to do so.My distro is Centos 5.4. I followed the Centos user guide to install and configure postfix into the server,
Code:
http://wiki.centos.org/HowTos/postfix
but still didn't receive any email.
View 3 Replies
View Related
Apr 1, 2011
I have a website sitting on my private server (CentOS 5x) running plesk 9.2.2. There is a form for customers to fill out and when they press send it sends the data to a specified email address and a BCC if desired (email address present in BCC Field) and and response to the person submitting the form. The problem I am having is everyone gets their email after the submit button is pressed except the person listed in the TO field. Below is the output from postconf -n and below that is the maillog
[root@usloft1105 ~]# postconf -n
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases, hash:/var/spool/postfix/plesk/aliases
[code].....
View 2 Replies
View Related
May 3, 2011
I used this tutorial to setup to setup iSpconfig postfix courier: [URL] but i cannot send or receive email:
[Code]....
Basically when i create users in ISPconfig, something goes wrong, mysql is running and i have postfix-mysql installed and running too.
[Code]...
View 2 Replies
View Related
Mar 22, 2011
My company email server has been working flawlessly for the last 5+ years. Recently, one of our clients put their email server behind a firewall (an assumption on my part; details below). Ever since, email sent from within the company (192.168.xxx.xxx internal address; all computers and server is behind a NAT firewall [Netgear FVX538]) is either being sent to the client after some delay (if email is sent using Outlook) or is being deferred until the messages expire (Thunderbird, Squirrelmail, etc.). Email sent to the client from anywhere outside the company (using Thunderbird, Outlook or any other email client) is also delivered without any problems (usually after a short delay).
All other emails to the World are being sent without any problems at all (both inside and outside the company; using any email client or webmail). I did contact the client's postmaster, but the client, being a large government agency, will probably not address the problem (if it is on their side) anytime soon. I am not sure if I can do anything from my end to solve the problem. Ever since the problem with the client began, I added two statements to the postfix configuration file (smtp_pix_workaround_delay_time = 20s and smtp_pix_workaround_threshold_time = 0s); this seemed to a bit - it reduced the delay for emails sent via Outlook to a few minutes (as opposed to 30+ minutes); emails sent using Thunderbird/webmail are still being deferred.
Server details: Dual quad-core processor machine, 32 GB RAM, dual 1 gbps network, running Fedora 14 (64-bit; loosely modeled along the lines of Perfect Server (with ISPConfig2) as described on the howtoforge website). Running Postfix (v. 2.7.1), Dovecot (v. 2.0.9).
Postfix details:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
body_checks = regexp:/etc/postfix/mbl-body-deny
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
[code]....
I emailed the client's postmaster suggesting they disable smtp fixup. But still, what bothers me now is that Outlook works (both within and outside the company) while Thunderbird, webmail, etc. (used by ~90% of the users) do not. In addition, all email clients from outside the company can send email (authenticated via the company server) to the client without any problems. Is there anything I can do on my end to make non-Outlook clients work within the company (webmail is hosted on the company server; so, it would have an internal address as well)?
View 3 Replies
View Related
Dec 7, 2010
I just set up a new email server on Debian Lenny. It's Postfix for MTA and Dovecot for IMAPS server. I use Dovecot for authentication. I have two UNIX users on the system (except root), one was added before the installation of Postfix and Dovecot. I'm not doing any virtual things, just plain UNIX users and one domain on a dynamic IP. The first user, "webadmin" can send and receive emails just fine through the server from my mail client.
Now I just added a new user, "scarleo", and it turns out I'm unable to send and receive emails with this account. If I log in (SSH) with scarleo I can use bash mail to send emails, works fine. scarleo can also receive emails from webadmin and can connect to Dovecot to read emails. However scarleo cannot send or receive to or from anyone outside the server from my mail client. I have restarted both Postfix and Dovecot after adding the user. Do I have to do something else to make this account work like webadmin's?
A few relevant lines from mail.log: (I've modded my real IP)
Code:
Dec 7 17:44:42 homer dovecot: imap-login: Login: user=<scarleo>, method=PLAIN, rip=96.136.112.229, lip=192.168.0.18, TLS
Dec 7 17:44:42 homer dovecot: imap-login: Login: user=<webadmin>, method=PLAIN, rip=96.136.112.229, lip=192.168.0.18, TLS
Dec 7 17:45:16 homer postfix/smtpd[5915]: connect from bredband.comhem.se[96.136.112.229] .....
View 4 Replies
View Related
May 25, 2010
I'm trying to set up a basic smtp server on my local computer that I can send basic, unencrypted email through on port 25. I installed postfix, and I chose the following options:
Internet Site,
System Mail Name: localhost
Root and postmaster mail recipient: I left this blank
For other domains to accept mail, I entered : NONE, localhost
No force synchronous mail updates
Local networks: 127.0.0.0/8
[Code].....
View 2 Replies
View Related
Sep 8, 2010
After a reboot of my VPS, I keep getting the following error when sending email to my domain (hosted on Google Email). I can send to other email addresses but my own. So it seems like postfix thinks all mydomain.co.nz is to be sent internally?
Sep 9 09:25:05 mydomain postfix/pickup[20784]: 0316C3CC68: uid=1000 from=<sidb>
Sep 9 09:25:05 mydomain postfix/cleanup[20806]: 0316C3CC68: message-id=<20100908212505.0316C3CC68@mydomain.co.nz>
Sep 9 09:25:05 mydomain postfix/qmgr[20783]: 0316C3CC68: from=<sidb@mydomain.co.nz>, size=326, nrcpt=1 (queue active)[code].....
How do I tell postfix that mydomain.co.nz is to be sent to Google email server?
View 2 Replies
View Related
Dec 31, 2009
I have an email setup where all of the emails from our email host is downloaded to our Linux server using Fetchmail. Then some of the incoming emails are sent to an MS exchange server (server1.domain.com) using Postfix. What i want to do is to send a copy of all emails to Another server (server2.domain.com) for redundancy.Can postfix be configured to send copies out to both?
View 1 Replies
View Related
Nov 30, 2010
i m using code for sending email through GMAIL SMTP as given below... can any one tell me that how i can send EMAIL through Centos 5 CLI mode...in graphical mode we use webbrowser but in Command line how i can use this project.
View 1 Replies
View Related
Dec 28, 2010
tell postfix to send email sent to one email address to another email address. What I really need to do is tell postfix that every email sent to [URL] and [URL] be sent to [URL] I tried transport maps like this: [URL] but that did not work. I then tried canonical maps like this:
recipient_canonical file:
/^((dbsupport|helpdesk).*)thisdomain[.]com$/ admins@thatdomain.com
sender_canonical file:
/^(.*@).*thisdomain[.]com$/ ${1}thatdomain.com
but it did not work either. I am really exhausted and I need to find a solution for this one since it is my boss asking me to get this working. This is what if in /var/log/mail in box1:
Dec 28 16:10:25 box1 postfix/pickup[19291]: 54D258F726: uid=0 from=<root>
Dec 28 16:10:25 box1 postfix/cleanup[23489]: 54D258F726: message-id=<4D1A5241.mailIBZ11LRR6@box1.thisdomain.com>
[code]....
View 4 Replies
View Related
Oct 14, 2010
my ISP block port 25. So i enable the port 587 in my postfix but every time of external ISP try send email to me, it try send on port 25. How can i "tell" to every external postfix to send me on port 587 ? Exist some configuration on DNS to this ?
View 1 Replies
View Related
Jul 26, 2010
In my Windows environment, I use email client such as Microsoft Outlook to connect to our email server to send email with the following configuration:
Incoming server (POP3): 995 - (requires with SSL)
Outgoing server (SMTP): 465 - (use encrypted connection SSL)
[code]....
And the mail server requires user ID login and password.how do I setup a text command based email client in my Linux (Centos 5.1) to send out email through the existing email server above, which is in another machine? The email client has to be text command based because I need to use command line to send notification email from anothar application installed in my Linux (Centos 5.1) Since the email client will only be used to send email notification, I don't require setting up of an email server in my linux.
View 2 Replies
View Related
Jul 1, 2010
is there a way to allow unsubscribed email address to send emails to mailman list without having to manually set a filter for that email address?
View 1 Replies
View Related
Jun 3, 2009
Debian 5, apache 2.2 I've got Apache up and hosting multiple sites. Each site will have a php contact me page that will simply dump an email to a fixed address. What program should i be using to accomplish this? I've used nullmailer before but that assumes you have a fixed smarthost somewhere which I don't.
View 6 Replies
View Related
Feb 23, 2010
I'm attempting to send email used a textbook PHP application. The application fails to send an email.Do I need to setup an email server to get the ap to work?Right now, I'm getting email through Kontact via my web host, Yahoo mail and Google mail.
View 2 Replies
View Related
Jan 14, 2010
I have been running an email server on a Red Hat 9 system for 5 years, and wanting to upgrade it to the latest Fedora OS. A few days ago it crashed. The server is running Fedora 11 (up-to-date). Clients are Fedora 11 and Windows XP machines using Thunderbird for accessing email. The server is running Postfix and Dovecot. Within my local network I can send and receive emails. I can also send email to addresses outside of my local network. The only problem is that I cannot receive any email from outside the local network. I cannot think of anything aside from my firewall (iptables) or postfix config that could be causing the problem.
Below are my iptables file, and the postfix main.cf changes that I have made.
Iptables (the same file I was using on Red Hat version 9 with one minor deprecated syntax changed):
*nat
:PREROUTING ACCEPT [22:1894]
:POSTROUTING ACCEPT [14:840]
:OUTPUT ACCEPT [17:1356]
-A POSTROUTING -o eth0 -j MASQUERADE
COMMIT
*filter .....
View 11 Replies
View Related
Aug 16, 2009
Just recently I started using a cluster in my school to run some heavy tasks, which might require long periods to get done. The thing is that I can only send one task after the previous one has been completed (cluster use policies) and since I don't know in advance how much time each task will take, I'd like to have a way of knowing when one given task is already done (other than keep checking it).I am allowed to submit the jobs in bash scripts, so that's what I have at my disposal.
View 11 Replies
View Related
Jul 12, 2010
script for to check a logfile in frequently and the script need to send an email alert9to external email id's) incase of any new error in the log file.
View 3 Replies
View Related
May 21, 2009
I have an email server configured with postfix, dovecot, saslauthd and squirrelmail. It works great. In fact I'd even say it works too well: in squirrelmail, I can configure any sender address and my server will accept it. Message will be sent, wether the sender's address is [URL] or [URL]. Is there any way of limiting it in such way that only [URL] is accepted as sender's address?
View 6 Replies
View Related
Mar 14, 2009
How to sending email from command line? Im just try send email look at below:
Code:
[root@fedora sniper]# echo "test" | mail -v -s test tazmanic76@hotmail.com
tazmanic76@hotmail.com... Connecting to [127.0.0.1] via relay...
220 localhost.localdomain ESMTP Sendmail 8.14.3/8.14.3; Sat, 14 Mar 2009 15:50:43 +0800
>>> EHLO localhost.localdomain
250-localhost.localdomain Hello localhost.localdomain [127.0.0.1], pleased to meet you
250-ENHANCEDSTATUSCODES
250-PIPELINING
[Code]....
View 4 Replies
View Related
Jul 12, 2010
Has anyone had success sending email with Balsa and Gmail. I can receive email, just can't send.
update. need to add the port to the server name.
View 3 Replies
View Related
Mar 8, 2010
I am trying to configure virtual alias using regular expression.
For example :
Email send to user.1@example.com and user.2@example.com will deliver to user mailbox.
Email send to user2.1@example.com and user2.2@example.com will deliver to user2 mailbox.
And the numbers or alphabet in between user name and the domain will be vary , I can't just do a normal alias.
I been try to play around with main.cf and the virtual alias table but still not able to get work. So I am not sure is the main.cf didnt configure correctly or the regular expression is not working.
View 3 Replies
View Related
Jan 21, 2010
I have an issue with sendmail. I need to configure sendmail to send email from command prompt to any domain. This is just for the notification purpose. I installed sendmail and sendmail-cf and sm-client. The following are the configuration I have done.
/etc/mail/sendmail.mc
1) dnl # DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
2) m4 /etc/mail/sendmail.mc > /etc/mail/sendmail.cf
3) /etc/hosts = 127.0.0.1 localhost.localdomain
/etc/hosts = 192.168.2.50 mysystem
4) /etc/hosts.allow = sendmail:ALL
[Code].....
View 1 Replies
View Related
Apr 27, 2011
I have the following problem with sendmail on F14 (had the same on F13 already):
I have a network setup using bridging which is controlled through traditional ifup/ifdown (because NetworkManager can't handle bridging). My sendmail configuration differs from the Fedora default only by having a SMART_HOST relay. The queueing interval in /etc/sysconfig/sendmail is the default (1h).
When my network connection is up, sendmail normally sends email through the relay immediately. Sometimes I have to interrupt the connection for a few minutes. When my network connection is down, sendmail starts queueing email (OK this far). When the network connection comes back up, I'd expect sendmail to restart sending mail through the relay again. But sometimes, that doesn't happen. Instead, sendmail keeps queueing my mail infinitely (I have seen it happen for several days) until I finally notice that my email isn't received, and run sendmail -q by hand (by that time, my boss is already angry that I'm not responding to his email). In that state, even new mail is queued rather than forwarded by sendmail. It appears that the only way to stop that behavior is to restart the sendmail service.
View 1 Replies
View Related
