I have set up a cron job in linux server using the command 'wget -q -o wget_outputlog url'
But on every run, an empty file being created at root.
How to stop this.
Debugging some of my scripts after upgrading from Debian Lenny to Ubuntu 10.04. In so doing, I tripped over this "problem," the solution to which may give me a clue to others.
On a bash shell command line I created a file thusly:
sudo touch zero_file
and it lists as expected with default permissions 0644:
-rw-r--r-- 1 root root 0 2011-03-09 11:18 zero_file
But then this command fails
sudo echo abcdef >>zero_file
-bash: zero_file: Permission denied
I can place the command (minus the "sudo") in a script & run it under the auspices of sudo & it works. Am I missing something re the stdin redirection when using sudo?
I get a page of rssfeed.php in my root dir, whenever i run it once more, there goes a new rssfeed.php.0, rssfeed. php.1...etc, the number increases. but all of them stays empty, is there a tag that avoids this?I am not sure which one to use on the man page, there is -o for output, but none for no output?
View 1 Replies View RelatedI have an Ubuntu server in which a file is dumped every hour and a new file for the next hour and the process continues. If there is any problem due to which the creation of file stops then empty files are created every minute till the process is killed & started again. I need help to make a shell script to check if the empty files are being created and then kill the process and start it again.It would be a great help if anyone can help me regarding this.
View 9 Replies View RelatedI am a final year student doign Computer systems engineering and just been introduced to linux. While still strugling to catch up with the commands, I am now given an assignment under shell scripting.I seriously am strugling to understand this question, can you please assist me.Here follows the assignment:
Operating Systems III
Some tips
e.g. (test if a file is empty, if it is then display "file is empty" otherwise display
[code]....
I'm a little bit confused with partitioning the filesystem in Linux. the difference between creating the file system with fdisk and mkfs (when formatting the disk). I can't clearly tell my problem, so please look at this picture:
View 2 Replies View RelatedI installed qt-creator 4.5.3 in fedora 12 (gnome) . I then created an empty Qt projet and added a main.cpp as below
Code:
#include <QApplication>
#include <QPushButton>
[code]....
I scan a document with root pressing the scanner button. I would like to send an email using my gmail account. OK. nothing difficult with that... mbsmtp + mutt for sending trhough the sh script.
1-root is to be avoided at max to do some internet duties, due to security. Apt-get is good, but ok surfing or email sending shall be avoided for higher security.
2- sudo or su running mutt through this way, ok, using an existing user. OK, possible and simple, but not comfortable since you have to use an account of an user existing (create a new user for scanner and email?? - no, come on, we have linux and can maybe find a solution)
how to send an Email from root console using an non created USER?
when i wget aro2220.com it displays
--2011-03-02 16:35:58-- url... 127.0.1.1
Connecting to aro2220.com|127.0.1.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 177 [text/html]
Saving to: 'index.html'
100%
2011-03-02 16:35:58 (12.4 MB/s) - 'index.html' saved [177/177]
However, when I look into the file it is actually blank saying something like "It works! This is the default web page for this server" which can't be correct since that is not what Aro2220.com actually displays.
Furthermore, when I try to wget files I've put on the server for myself it returns a 404, file not found.
I would like to use wget to downlaod file from Redhat linux to my windows desktop , I tried some parameter but still not work , can advise if wget can do download file from linux server to windows desktop ? if yes , can advise how to do it ?
View 14 Replies View RelatedI'm having problems trying to install Ubuntu 10.10 onto a partition that I have created. I boot from disc, select that I want to instal it to a partition and when I get to the list of available partitions, it is not listed.
View 7 Replies View RelatedI was unable to find an answer to something that (I think) should be simple:
If you go here: [URL]
like so:
wget [URL]
you'll probably end up with a file called "download_script.php?src_id=9750"
But I want it to be called "molokai.vim", which is what would happen if I used a browser to download this file.
Question: what options do I need to specify for wget for the desired effect?
I'd also be ok with a curl command.
Example: [url]
This was what I tried...wget -A rar [-r [-l 1]] <mediafireurl>
That is to say, I tried with and without the recursive option. It ends up downloading an HTML page of a few KB in size, while what I want is in the range 90-100 MB and RAR.
What happens with MediaFire for those who may not be aware, is that it first says
Processing Download Request...
This text after a second or so turns into the download link and reads
Click here to start download..
How to write a proper script for this situation.
how can I define file type for wget to download . for example I do not want to download *.html or I just want to download *.jpg files . or if it does not support any of them do you know any other suggestion ?
View 1 Replies View RelatedI am calling a service using http post through wget, the command is successfully executing but for each execution its creating a file and saving variable names n data n it. I want to execute this command without creation of a file. Would anyone suggest me what needs to be done in this regard.
My command:
wget --post-data 'var1=99&var2=200' http://xyz.example.com:5555/invoke/Samples:httpInvoke
For every execution, its creating the files with names:
Samples:httpInvoke1
Samples:httpInvoke2
Samples:httpInvoke3
[Code]...
I have just recently installed Fedora 14 Standard Edition. Upon after mounting another parition, I attpempt to find the new partition files in the directory I created for the mount point, but it is not showing. I know the mounted parition is there becuase upon "ls -l /iso", all the files show up.
I had previously tried out Fedora 14, XFE, and this problem did not occur. I also previously installed this same Standard Edition, and this problem did not occur. This is from the exact same download, however, the only difference is I installed Grub into a different partition. But now I am unable to find my new folders in Gnome.
I have a large file that a process writes to. I would like to empty that file. If I delete it the process will stop writing to it. Just flush the content but keep the file.
View 9 Replies View RelatedI need to use wget (or curl or aget etc) to download a file to two different download destinations by downloading it in two halves:
First: 0 to 490000 bytes of file
Second: 490001 to 1000000 bytes of file.
I will be downloading this to separate download destinations and will merge them back to speed up the download. The file is really large and my ISP is really slow, so I need to get help from friends to download this in parts (actually in multiple parts)
The question below is similar but not the same as my need: How to download parts of same file from different sources with curl/wget?
aget
aget seems to download in parts but I have no way of controlling precisely which part (either in percentage or in bytes) that I wish to download.
Extra Info
Just to be clear I do not wish to download from multiple locations, I want to download to multiple locations. I also do not want to download multiple files (it is just a single file). I want to download parts of the same file, and I want to specify the parts that I need to download.
I have this nasty habit of refreshing desktop in a quick succession by right-clicking and selecting 'Refresh',on my XP system at office.(And,iam sure most of us do the same).With Ubuntu,if a right-click on desktop slowly and select 'align by...',it simulates the XP refresh action as explained above.But,if i perform the same action rapidly,it takes this first option from right-click context menu,which is 'Create Folder',and results in an empty folder being created on desktop.I tried double right-clicking and again it created an empty folder.Is there any workaround to handle this.I mean:Can the right-click context menu items be shuffled so that the 'Create Folder' option is moved from 1st place
View 9 Replies View RelatedI having been searching for a way to create an empty or blank iso file, so that I can mount it, and have a backup application think it's a blank CD. I am tired of wasting CD's by having the application write a recovery CD, just for me to turn around and export it to an iso image to be stored in a online archive, and then throw away the physical CD.
View 5 Replies View Relatedcreate one tar.gz file that contains my /home, /etc, /root directory.
a) The process ended with a 88GB file size (which is ok) but with the following message.Code: tar: Exiting with failure status due to previous errors.I have searched a little but I could not find what went wrong.
b) What are the limitations of tar and gz for backups. Of course I fully understand that they can not be used for differential backups (if it is called like that)
c) Let's say that my backup will be a file of 100GB and I want to see the contents of the .tar.gz. In kde there is a program called ark. Can ark handle so big files? Does it use my hard disk (eg. /tmp) to uncompress the file so to show me its contents? It might be the case that might be the compressed file is much bigger than the left space on the hard disk?
d) How can I do an integrity check when my tar.gz file is created?
My cron job is executing the below mysqldump command but it produces an empty sql file. However, when I run from the command line, it works as expected.
Code:
15 6 * * * root mysqldump -uroot -pXXXXXXX mydbname | gzip > /home/dbbackup/db_`/bin/date +\%Y\%m\%d\%H\%M`.sql.gz
I'm on CentOS 5.4 and use "env EDITOR=nano crontab -e" edit my cron (then paste the above command.
a server at work has been accessed through the desktop environment as root. I know this is a risk and since I have never done it before I was wondering if there are any files created by the desktop that could compromise the system and how could I clean it up.
View 2 Replies View RelatedI am using mint 8 for a 2 weeks, I am noob to linux but I like Mint than any other linux distro which is great alternative to windows. I have a problem regarding password reseting.
1. My laptop automatically get logged in without asking user name and password.
2. I tried to change password for newly created user and root user using graphical way but it does not work.
2. I can perform administrator task using only OEM user which is default inbuilt user of mint.
How can make my laptop to ask password when mint get booted? How to change password for other users?
I was created one folder in linux with current time was 1978(For example). I was moved this folder to usb(FAT32 file format).While seeing this folder in window its not showing the folder time created time stamp, because the USB file system only support the year after 1980 . But again i am putting the same folder in linux ,its showing the correct time stamp.How is it possible? Because FAT32 only supports timestamp after 1980, but still its showing 1978 in linux system
View 7 Replies View RelatedTo be specified,what I want to do is:
if I create xxx.php,#!/usr/bin/env php will be the first line of the file
if I create xxx.py,#!/usr/bin/env python will be added first.
Is there any way to know which process had created any file in Linux Red Hat/CentOS 5?
View 2 Replies View Relatedi created a script file named myscript.shi ran this by typing sh myscript.sh and i got my outputbut,when i tried to execute by typing ./myscript.sh i received permission denied errori gave permission as chmod 777 myscript.shthen i executed by typing ./myscript.sh . It worked fineso i wanted to know whether using sh and ./ with permissions are same.. ?or did it work for only this.. are there any differences
View 1 Replies View RelatedI am just starting out in LINUX and I know the basic commands but I am a having a problem. I scoped the man pages but I can't get it. Maybe one of know... Can anyone tell me the cmd to figure out the system a file was created on? I just can't figure out this problem.
View 6 Replies View RelatedI am looking for a way to be mailed a new file when it is created in a certain directory.I have found tools that will notify me when a file is created, such as iWatch with iNotify, but is there a way to actually be sent the new file when it is created.It is only a short text log file, but I would like to read it in my inbox rather than have to login and open the file each time an event is logged.
View 2 Replies View Related