Ubuntu Installation :: 10.04 Doesn't Work On Computer?
Jun 1, 2010
Ubuntu 10.04 doesn't seem to work on my computer. When I install it (tried both CD, DVD and USB-stick) all I see is "Ubuntu" with a number of dots underneath, and after a while the screen turns black.I also tried the alternative ISO (with non-graphical interface), and that installation worked; I could partition the HD, enter username and password and it copied all files to the HD. But when it said it was finnished, and I rebooted the computer (without the installation media) "Ubuntu" shows on screen with a nuber of dots underneath, and after a while the screen turns black.The computer is new, has an i5-750 CPU, 4GB RAM and a XFX Radeon 5670 1GB graphics adapter and two identical HD:s, one with a working Windows 7 installation (disconnected when I try installing Ubuntu).
View 5 Replies
ADVERTISEMENT
Jan 4, 2010
I have installed Ubuntu on my MSI Mega PC but have no sound, also the display on the front of the computer doens't work. Unsure if there are drivers for this but here goes:
[Code]...
View 5 Replies
View Related
Jul 23, 2011
My problem is that it doesn't seem to work right on my computer. It boots up, but when it goes to start the xserver, it seems to get problem, it just remains black with a blinking white mark. If i go ctrl, alt, f2; it takes me to the command line, and that works fine. The disc works fine on my other laptop. i would really like to use mepis, Does anyone know how to fix this issue.
View 3 Replies
View Related
Mar 21, 2011
I've been a long time Windows user, but I've started a small firm and because of lack of funds, I've decided to install Ubuntu on my company's PCs.I have 8 PCs in total - 6 of them with Intel CPUs, and the last two with AMD CPUs. I bought the extra two computers because I've managed to find an extra two people to work at my company, and AMD-based PCs are cheaper so I've decided to buy them instead of Intel.Long-story short, I've installed Ubuntu 9.10 and boot time takes about half-an-hour. After the computers finally boot, USB hardware doesn't work at all. I was forced to buy PS/2 keyboards & mice and they both work fine after the PCs boot.I don't know what's causing this delay.I've enabled Cool 'n Quiet from BIOS.I've tried several instructions like editing the /etc/modules file.I've installed cpufreqd, tried to configure it, but it didn't work.I've check the CPU stats and my CPUs are running at 800MHz. I can't believe nobody managed to fix the 800MHz problem as I've noticed it's quite common among AMD Ubuntu users. I think I've tried almost anything that I've found on this forum.I can't keep asking my employees not to reboot their PCs. Both Chrome/Firefox crash a lot on Ubuntu so they're forced to restart their computers.The computer specs are: AMD Athlon II X2 240 dual-core @ 2.800MHz, 2GB RAM, 500GB HDD, etc.
View 9 Replies
View Related
Dec 28, 2010
I have installed Linux Mint 10 on a HP Pro Book 4720s, see here: [URL]
After the installation I wanted to shut down the PC and used the button in the menu. Then appears the Linux Mint Screen and nothing happens.
I could just shut down the PC by pressing the power button for a few seconds, but that isn't a solution.
View 4 Replies
View Related
Jun 6, 2011
I am having a problem installing Fedora from a CD.When I put the installation CD into the drive and restart the computer, the computer does not recognize the CD and boots automatically into my old version (version 8) of Fedora.I have already made sure that the CD drive comes before the HDD drive in my BIOS settings, and I have already tried using different CDs.
View 10 Replies
View Related
Jan 11, 2011
EDIT: I got it to work. It turns out that mesa-common-dev works with my nVidia drivers.
I'm new here, and to Linux/Ubuntu in general, so I apologize if this is in the wrong section or something. Anyways, I'm trying to get the OpenGL SDK to work on my computer. I've already gotten gcc/++ and whatnot, and I'm fairly sure I've upgraded my graphics drivers to the most current possible. A quick check reveals that my graphics card is nVidia:
Code:
01:00.0 VGA compatible controller: nVidia Corporation NV41.8[GeForce Go 6800] (rev a2)So I assume that I need to get the nVidia OpenGL packages:
Code:
sudo apt-get install nvidia-glx-dev
However, that nets me this error:
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package nvidia-glx-dev is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package 'nvidia-glx-dev' has no installation candidate
My only other thought is to apt-get mesa-common-dev, but I don't know if that will work with nVidia. (And this is a rather old computer, so the problem might just be one of obsoleteness, but it doesn't seem like so, from the error I'm getting).
View 4 Replies
View Related
Dec 30, 2009
I 've a Nokia CS-10 broadband stick (USB). I need to install and configure, and I don't know how do it. I found an article that review something like that: [URL]
1, The stick doesn't detected in the computer.
2. I made all the article steps, but shows me a error in the shell script on line 10.
View 3 Replies
View Related
Oct 7, 2009
I have already downloaded and installed the latest version of Adobe Flashplayer...
Quote:
But flash still doesn't work - there is no flash plugin in Firefox plugin list also.
I've tried to close-open Firefox, log out-log in, reboot - nothing.
OS Fedora 11 x64. I don't know, what am I doing wrong?
View 4 Replies
View Related
Oct 11, 2010
Upgraded from 10.04 to 10.10 using standard Update Manager procedure. Now themes don't work. When I change the theme, the window decorations change accordingly, but the contents of the windows (controls, panels) are in the raw X look (I don't know how else to put it) and do not change regardless of theme selection. I've tried customizing the theme and selecting something different on the "Controls" tab, but it doesn't work.
X is working properly with Nvidia driver, Compiz is working properly as well. Killing Compiz didn't help with the theme problem.I used 64-bit Lucid, so I guess it upgraded to 64-bit Maverick.
View 9 Replies
View Related
Feb 24, 2010
Every time I've tried to install 9.10, it will not run. I get "Grub - " and it just hangs there. I shouldn't have to deal with that. Why can't I just have a happy install like usual? 9.10 / Grub2 is not stable and it needs fixing. Grub2 sucks. It's in beta and no-one tells you that unless you do some looking. I've tried to fix it, can't. Linux really sucks for me right now.
View 3 Replies
View Related
Mar 20, 2010
I have a kind o Kubuntu-Studio 9.10
I installed from Ubuntu Karmic minimal, so i did install KDE.
i have update-manager-kde, update-notifier-kde and kpackage kit installed. for manual installing i use synaptic though.
in the repositry-manager the automatic updates are anabled (daily).
but it is not checking for updates. i checked manually in synaptic, and there are updates available.
so, how do i let it check automaticly for updates?
View 3 Replies
View Related
May 19, 2010
I just installed Ubuntu 9.10 amd64 on a laptop for my parents. They use SeaMonkey with Enigmail for their e-mail. They complained that they couldn't read their e-mail.
I did apt-get install enigmail.
Here are the versions that are installed:
enigmail 2:0.95.7-1ubuntu2
seamonkey 1.1.17+nobinonly-0ubuntu1
Unfortunately, enigmail didn't show up in SeaMonkey. I looked at the files it installed. It looks like it only points Thunderbird at enigmail, but not SeaMonkey.
How do I get enigmail to work with SeaMonkey? Is there another package I can install? Or do I have to manually move around the files?
View 2 Replies
View Related
Jun 10, 2010
I'm trying to install 10.04 but my Logitech diNovo Edge wireless USB keyboard doesn't work.
View 1 Replies
View Related
Jun 13, 2010
I installed Ubuntu 10.04 with WUBI. In the setup wizard in windows, I selected the D partition to install Ubuntu on. It extracted the files, and after a reboot, and selecting Ubuntu, the Ubuntu setup wizzard appeared. After it was done, it rebooted. I selected Ubuntu, and this appeared on my screen:
Code:
booting from (hd0,0)...
And there it stucks! I tried editing C:oot.ini, to let it select the ubuntu files.
My original boot.ini file:
Code:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS
[Code].....
I have very little space on my system partition (C:) So, I installed it on D:. I'm using Windows XP Professional SP2.
View 4 Replies
View Related
Jun 28, 2010
I found it is impossible to format partition during Ubuntu 10.04 installation.
My storage configuration is as following. 1TB (500GB X 2) AHCI RAID 0 (it is said fake raid) and covers below 4 partitions.
/dev/mapper/pdc_dgbbagea1 9621688 5872752 3260168 65% /
/dev/mapper/pdc_dgbbagea4 945587172 95673304 802259056 11% /home
/dev/mapper/pdc_dgbbagea3 9698380 1363364 7846240 15% /opt
Partition 2 is swap partition and root partition is ext3 original.
Since there is no enough space for upgrading, I try to format root partition and install a complete pure new OS. After I booting up system from Live or Alternative disk, I try to switch root partition from file system ext3 to ext4 and format it. However, Formating process always get failed after couple trying. Even I quit installation and use tools "Disk Utility" to check and adjust partition information. It reports device is busy.
View 1 Replies
View Related
Jul 8, 2010
I first installed asterisk using sudo apt-get install asterisk on ubuntu 10.04. After doing this the SIP packages did not install for some odd reason.I uninstalled asterisk using sudo apt-get remove asterisk then reinstalled and now none of the asterisk config files are gone. deleted all files and directories I could find relating to asterisk, rebooted the machine, did a kernal upgrade, and a package update and reinstalled asterisk using sudo apt-get install asterisk, and all the config files are still missing. What am I missing here!
View 6 Replies
View Related
Aug 23, 2010
The announcement of several new make scripts in the 2.6.32 release notes is very exciting.Most people uses the kernel shipped by distros - and that's good. But some people like to compile their own kernels from kernel.org, or maybe they like following the Linux development and want to try it. Configuring your own kernel, however, has become a very difficult and tedious task - there're too many options, and some times userspace software will stop working if you don't enable some key option. You can use a standard distro .config file, but it takes too many time to compile all the options it enables.
To make easier the process of configuration, a new build target has been added: make localmodconfig. It runs "lsmod" to find all the modules loaded on the current running system. It will read all the Makefiles to map which CONFIG enables a module. It will read the Kconfig files to find the dependencies and selects that may be needed to support a CONFIG. Finally, it reads the .config file and removes any module "=m" that is not needed to enable the currently loaded modules. With this tool, you can strip a distro .config of all the unuseful drivers that are not needed in our machine, and it will take much less time to build the kernel. There's an additional "make localyesconfig" target, in case you don't want to use modules and/or initrds.
View 1 Replies
View Related
Oct 13, 2010
I have installed Ubuntu 10.10 on a 16GB USB-Stick using the Startup Disk Creator. After booting from it, I saw the progress dots running on the start screen running for ever (30 minutes until I switched off my Laptop). The whole time the in-use LED of my Harddrive was on. What is Ubuntu doing so long on my Harddisk?How can I manage, that it will work properly?
View 9 Replies
View Related
Nov 8, 2010
VirtualBox: So, with VB, testing out stuff without messing up your actual operating system (in my case Linux). (I had more to say but can't remember atm) Remastersys: Well, I think I MIGHT have a reason as to why Remastersys doesn't work for me. I think I might have downloaded the wrong repository thing. I downloaded:
[Code]...
I ask because of the word Lucid is in the sentence. What do you all think, should I un-install remastersys and downloaded the one with the word Lucid in it and see if that makes a difference as to whether the program makes a proper .iso file or not?
View 2 Replies
View Related
Dec 22, 2010
I installed ubuntu 10.10 today and when i open the browser it doesn't show any sites. I tried
> ping www.google.com
ping : unknown host www.google.com
> telnet > open localhost
[code]....
View 1 Replies
View Related
Feb 9, 2011
I've just moved from openSuSE to Kubuntu 10.10 - and I find almost all of emacs extentions not working. For example - see the report of emacs --degug-init
Here it says that emacs have encoutered problems while loading autopair.el
But it was working on openSuSE! Or I have done smth wrong?
View 2 Replies
View Related
Apr 20, 2011
I am having issue with my keypad( place where we move the mouse pointer), after installing rhel-6
View 2 Replies
View Related
Apr 29, 2011
I have been working on this problem for a year now. It is becoming critical because I need to upgrade Linux. I really want Ubuntu.
Keyboard works fine at power on. I can edit BIOS options. I put in the CD or DVD, it starts fine. Keyboard works for selecting boot options. Once the installation begins however, no more keyboard...
This is true across every version and distribution of Linux I have come across- I have dozens of liveCDs -EXCEPT Linux Mint 8.
Laptop = Acer 5517
Running Linux Mint 8 & Windows 7
I have no USB Legacy Emulation BIOS option
I've tried this: [url]
View 3 Replies
View Related
Apr 29, 2011
Before ubuntu can even boot I get this on my monitor
Out of range Please set to 1280x1080 @ 60Hz
I get that a grub. I'm not even sure if ubuntu can even boot because my monitor won't let me see anything. I'm using the driver off the nvidia website, not the stock one that came with ubuntu.
View 2 Replies
View Related
Aug 22, 2011
I been trying to update, but seems to open then close rally fast the same for package manager. So I try to update in terminal and the on'y thing comes up is ree... 50%. I have never seen that the many years using Ubuntu.
View 2 Replies
View Related
Jun 2, 2010
I'm trying to install Debian 5.0x to my miniITX computer.
Setup:
I had this setup running in a previous configuration. The only difference were the disks. I had a 120GB and a 1TB (/home). Because I need more space I swapped both disks for 2 x 2TB.
I tried a 64bit Debian 5.xx stable install. Everything goes fine until the first boot. After the POST and BIOS screen a cursor justs blinks and the computer does nothing. the computer doesn't start GRUB
Well I thought maybe a small error with downloading the DVD so I tried another debian but Testing now. There the setup hangs when it wants to make the file-systems. It says something like can't make ext4 filesystem. I also tried with ext3. So I manually tried to do fdisk and mkfs.ext4 (and mkfs.ext3) for both disks in the console during installation. fdisk works but when I try mkfs.ext4 /dev/sda1 it says that some bin-file is missing? How's that possible on an installation disc? Never ever had that before?
Well after 15 attempts (meanwhile lost 2kg of fingernails)I tried another 32 bit DVD install of Debian 5.xx. It can make the filesystems again and install everything but when it has to boot for the first time it just doesn't. I don't even see GRUB.
Seems to me that the computer doesn't refer to the HD to boot. In the BIOS the BOOT order is just fine (the previous config with the old HD's just worked fine). Even when I put in the install DVD it skips the HD and boots from the DVD?
I really don't get it. The disks are both shown in the BIOS. Is this a hardware or software issue? I think that Linux or GRUB should be able to work with 2TB discs isn't it?
View 8 Replies
View Related
Jan 4, 2010
After upgrading Jaunty to Karmic internet sharing (iptables) stoped working. Nothing in iptables configuration was changed.
Code:
# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
[code]....
View 2 Replies
View Related
Jan 17, 2010
The cooling fan on my Toshiba Satellite m500 doesn't work after installation of ubuntu 9.10. I've looked on the internet but i can't seem to find anything.
View 4 Replies
View Related
Feb 8, 2010
This weekend I did a distribution upgrade to Karmic, but it didn't go very well. Upon reboot, I see a white ubuntu logo on a black screen. I hear the speakers pop, and the screen flashes several times, sorta like the blank screen is maybe changing video modes. After a while I see what I think is garbled text but is unreadable, and it looks like I can log on even though I can't read anything. Now, booting into recovery mode gets me to a readable prompt. There are no upgrades to apply. Typing gdm from here gets me to the desktop just fine. Also when booting, if I choose an earlier kernel the system boots fine also, except the touchpad doesn't work.
View 1 Replies
View Related
