I've just moved from openSuSE to Kubuntu 10.10 - and I find almost all of emacs extentions not working. For example - see the report of emacs --degug-init
Here it says that emacs have encoutered problems while loading autopair.el
But it was working on openSuSE! Or I have done smth wrong?
I have a directory of a load of files without extensions. I know what the filetype should be, so is there any way of batch renaming the files to append a given extension onto it. i.e. text would be renamed as text.txt?
View 3 Replies View RelatedThe adapter I purchased (Zonet ZEW2508 ) uses the Ralink 2070 chipset - a fact that originally excited me because Ralink seems to be fairly loving to the Linux community. However, despite my best efforts I can't get the thing to work. Initially I tried following directions to set up the driver you can download from the Ralink website. The directions I found were written February first, and Ralink updated the driver February eighth - so as far as I can tell the directions no longer work. After screwing around trying to figure that out for a while I decided to give ndiswrapper a go.
Initially this seemed promising. I just harvested the drivers from the CD and followed one of the many ndiswrapper directions available - most helpful seemed initially to be the Ndiswrapper Troubleshooting Guide found in this forum, however the solutions offered there didn't work either. When I throw an ndiswrapper -l into the terminal it looks promising at first, it tells me the driver is installed and the device is present, but it just doesn't work. When I try iwconfig, or iwlist scan it tells me "no wireless extensions," and "interface doesn't support scanning" respectively. The only devices even listed are lo, eth0, and pan0. There's no wlan0 or anything of the sort.
with 11.2 and now with 11.3 (using KDE4) i got two issues with emacs:
1) The emacs window doesn't properly snap to other windows. There is mostly a small gap inbetween.
2) When switching between buffers with C-x b the emacs window shrinks vertically from below!
I was using the following code in my .emacs file to start emacs maximized:
Quote:
(defun toggle-fullscreen ()
(interactive)
(x-send-client-message nil 0 nil "_NET_WM_STATE" 32
'(2 "_NET_WM_STATE_MAXIMIZED_VERT" 0))
(x-send-client-message nil 0 nil "_NET_WM_STATE" 32
[Code]...
I have already downloaded and installed the latest version of Adobe Flashplayer...
Quote:
But flash still doesn't work - there is no flash plugin in Firefox plugin list also.
I've tried to close-open Firefox, log out-log in, reboot - nothing.
OS Fedora 11 x64. I don't know, what am I doing wrong?
Ubuntu 10.04 doesn't seem to work on my computer. When I install it (tried both CD, DVD and USB-stick) all I see is "Ubuntu" with a number of dots underneath, and after a while the screen turns black.I also tried the alternative ISO (with non-graphical interface), and that installation worked; I could partition the HD, enter username and password and it copied all files to the HD. But when it said it was finnished, and I rebooted the computer (without the installation media) "Ubuntu" shows on screen with a nuber of dots underneath, and after a while the screen turns black.The computer is new, has an i5-750 CPU, 4GB RAM and a XFX Radeon 5670 1GB graphics adapter and two identical HD:s, one with a working Windows 7 installation (disconnected when I try installing Ubuntu).
View 5 Replies View RelatedUpgraded from 10.04 to 10.10 using standard Update Manager procedure. Now themes don't work. When I change the theme, the window decorations change accordingly, but the contents of the windows (controls, panels) are in the raw X look (I don't know how else to put it) and do not change regardless of theme selection. I've tried customizing the theme and selecting something different on the "Controls" tab, but it doesn't work.
X is working properly with Nvidia driver, Compiz is working properly as well. Killing Compiz didn't help with the theme problem.I used 64-bit Lucid, so I guess it upgraded to 64-bit Maverick.
Every time I've tried to install 9.10, it will not run. I get "Grub - " and it just hangs there. I shouldn't have to deal with that. Why can't I just have a happy install like usual? 9.10 / Grub2 is not stable and it needs fixing. Grub2 sucks. It's in beta and no-one tells you that unless you do some looking. I've tried to fix it, can't. Linux really sucks for me right now.
View 3 Replies View RelatedI have a kind o Kubuntu-Studio 9.10
I installed from Ubuntu Karmic minimal, so i did install KDE.
i have update-manager-kde, update-notifier-kde and kpackage kit installed. for manual installing i use synaptic though.
in the repositry-manager the automatic updates are anabled (daily).
but it is not checking for updates. i checked manually in synaptic, and there are updates available.
so, how do i let it check automaticly for updates?
I just installed Ubuntu 9.10 amd64 on a laptop for my parents. They use SeaMonkey with Enigmail for their e-mail. They complained that they couldn't read their e-mail.
I did apt-get install enigmail.
Here are the versions that are installed:
enigmail 2:0.95.7-1ubuntu2
seamonkey 1.1.17+nobinonly-0ubuntu1
Unfortunately, enigmail didn't show up in SeaMonkey. I looked at the files it installed. It looks like it only points Thunderbird at enigmail, but not SeaMonkey.
How do I get enigmail to work with SeaMonkey? Is there another package I can install? Or do I have to manually move around the files?
I'm trying to install 10.04 but my Logitech diNovo Edge wireless USB keyboard doesn't work.
View 1 Replies View RelatedI installed Ubuntu 10.04 with WUBI. In the setup wizard in windows, I selected the D partition to install Ubuntu on. It extracted the files, and after a reboot, and selecting Ubuntu, the Ubuntu setup wizzard appeared. After it was done, it rebooted. I selected Ubuntu, and this appeared on my screen:
Code:
booting from (hd0,0)...
And there it stucks! I tried editing C:oot.ini, to let it select the ubuntu files.
My original boot.ini file:
Code:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS
[Code].....
I have very little space on my system partition (C:) So, I installed it on D:. I'm using Windows XP Professional SP2.
I found it is impossible to format partition during Ubuntu 10.04 installation.
My storage configuration is as following. 1TB (500GB X 2) AHCI RAID 0 (it is said fake raid) and covers below 4 partitions.
/dev/mapper/pdc_dgbbagea1 9621688 5872752 3260168 65% /
/dev/mapper/pdc_dgbbagea4 945587172 95673304 802259056 11% /home
/dev/mapper/pdc_dgbbagea3 9698380 1363364 7846240 15% /opt
Partition 2 is swap partition and root partition is ext3 original.
Since there is no enough space for upgrading, I try to format root partition and install a complete pure new OS. After I booting up system from Live or Alternative disk, I try to switch root partition from file system ext3 to ext4 and format it. However, Formating process always get failed after couple trying. Even I quit installation and use tools "Disk Utility" to check and adjust partition information. It reports device is busy.
I first installed asterisk using sudo apt-get install asterisk on ubuntu 10.04. After doing this the SIP packages did not install for some odd reason.I uninstalled asterisk using sudo apt-get remove asterisk then reinstalled and now none of the asterisk config files are gone. deleted all files and directories I could find relating to asterisk, rebooted the machine, did a kernal upgrade, and a package update and reinstalled asterisk using sudo apt-get install asterisk, and all the config files are still missing. What am I missing here!
View 6 Replies View RelatedThe announcement of several new make scripts in the 2.6.32 release notes is very exciting.Most people uses the kernel shipped by distros - and that's good. But some people like to compile their own kernels from kernel.org, or maybe they like following the Linux development and want to try it. Configuring your own kernel, however, has become a very difficult and tedious task - there're too many options, and some times userspace software will stop working if you don't enable some key option. You can use a standard distro .config file, but it takes too many time to compile all the options it enables.
To make easier the process of configuration, a new build target has been added: make localmodconfig. It runs "lsmod" to find all the modules loaded on the current running system. It will read all the Makefiles to map which CONFIG enables a module. It will read the Kconfig files to find the dependencies and selects that may be needed to support a CONFIG. Finally, it reads the .config file and removes any module "=m" that is not needed to enable the currently loaded modules. With this tool, you can strip a distro .config of all the unuseful drivers that are not needed in our machine, and it will take much less time to build the kernel. There's an additional "make localyesconfig" target, in case you don't want to use modules and/or initrds.
I have installed Ubuntu 10.10 on a 16GB USB-Stick using the Startup Disk Creator. After booting from it, I saw the progress dots running on the start screen running for ever (30 minutes until I switched off my Laptop). The whole time the in-use LED of my Harddrive was on. What is Ubuntu doing so long on my Harddisk?How can I manage, that it will work properly?
View 9 Replies View RelatedVirtualBox: So, with VB, testing out stuff without messing up your actual operating system (in my case Linux). (I had more to say but can't remember atm) Remastersys: Well, I think I MIGHT have a reason as to why Remastersys doesn't work for me. I think I might have downloaded the wrong repository thing. I downloaded:
[Code]...
I ask because of the word Lucid is in the sentence. What do you all think, should I un-install remastersys and downloaded the one with the word Lucid in it and see if that makes a difference as to whether the program makes a proper .iso file or not?
I installed ubuntu 10.10 today and when i open the browser it doesn't show any sites. I tried
> ping www.google.com
ping : unknown host www.google.com
> telnet > open localhost
[code]....
I am having issue with my keypad( place where we move the mouse pointer), after installing rhel-6
View 2 Replies View RelatedI have been working on this problem for a year now. It is becoming critical because I need to upgrade Linux. I really want Ubuntu.
Keyboard works fine at power on. I can edit BIOS options. I put in the CD or DVD, it starts fine. Keyboard works for selecting boot options. Once the installation begins however, no more keyboard...
This is true across every version and distribution of Linux I have come across- I have dozens of liveCDs -EXCEPT Linux Mint 8.
Laptop = Acer 5517
Running Linux Mint 8 & Windows 7
I have no USB Legacy Emulation BIOS option
I've tried this: [url]
Before ubuntu can even boot I get this on my monitor
Out of range Please set to 1280x1080 @ 60Hz
I get that a grub. I'm not even sure if ubuntu can even boot because my monitor won't let me see anything. I'm using the driver off the nvidia website, not the stock one that came with ubuntu.
I been trying to update, but seems to open then close rally fast the same for package manager. So I try to update in terminal and the on'y thing comes up is ree... 50%. I have never seen that the many years using Ubuntu.
View 2 Replies View RelatedI'm trying to install Debian 5.0x to my miniITX computer.
Setup:
I had this setup running in a previous configuration. The only difference were the disks. I had a 120GB and a 1TB (/home). Because I need more space I swapped both disks for 2 x 2TB.
I tried a 64bit Debian 5.xx stable install. Everything goes fine until the first boot. After the POST and BIOS screen a cursor justs blinks and the computer does nothing. the computer doesn't start GRUB
Well I thought maybe a small error with downloading the DVD so I tried another debian but Testing now. There the setup hangs when it wants to make the file-systems. It says something like can't make ext4 filesystem. I also tried with ext3. So I manually tried to do fdisk and mkfs.ext4 (and mkfs.ext3) for both disks in the console during installation. fdisk works but when I try mkfs.ext4 /dev/sda1 it says that some bin-file is missing? How's that possible on an installation disc? Never ever had that before?
Well after 15 attempts (meanwhile lost 2kg of fingernails)I tried another 32 bit DVD install of Debian 5.xx. It can make the filesystems again and install everything but when it has to boot for the first time it just doesn't. I don't even see GRUB.
Seems to me that the computer doesn't refer to the HD to boot. In the BIOS the BOOT order is just fine (the previous config with the old HD's just worked fine). Even when I put in the install DVD it skips the HD and boots from the DVD?
I really don't get it. The disks are both shown in the BIOS. Is this a hardware or software issue? I think that Linux or GRUB should be able to work with 2TB discs isn't it?
I would like to start using Firefox 4.X beta and I read it was possible to install extensions such as Ad Block and No Script . What I would like is step by step instructions on how to add these currently non compatible extensions.
View 4 Replies View RelatedAfter upgrading Jaunty to Karmic internet sharing (iptables) stoped working. Nothing in iptables configuration was changed.
Code:
# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
[code]....
The cooling fan on my Toshiba Satellite m500 doesn't work after installation of ubuntu 9.10. I've looked on the internet but i can't seem to find anything.
View 4 Replies View RelatedThis weekend I did a distribution upgrade to Karmic, but it didn't go very well. Upon reboot, I see a white ubuntu logo on a black screen. I hear the speakers pop, and the screen flashes several times, sorta like the blank screen is maybe changing video modes. After a while I see what I think is garbled text but is unreadable, and it looks like I can log on even though I can't read anything. Now, booting into recovery mode gets me to a readable prompt. There are no upgrades to apply. Typing gdm from here gets me to the desktop just fine. Also when booting, if I choose an earlier kernel the system boots fine also, except the touchpad doesn't work.
View 1 Replies View RelatedI have been trying to install Xubuntu 9.10 in an old desktop computer (Mobile AMD Duron, 213 Mb RAM) but the mouse doesn't work! Neither the Network connexion... When I boot with an USB (same OS) everything works fine... I can also boot with Puppy Linux (working in other partition) without any problem.
View 4 Replies View RelatedI have this weird problem because I upgraded to Lucid lynx beta, and my ATI drivers don't work anymore... no support yet I guess and because of the broken package it doesn't let me install skype what should I do? And by the way do you have any idea why when I accept to show or view webcams it cancels shortly before it shows.. Any ideas why?
View 3 Replies View Related
