Ubuntu Installation :: Increasing Partition On Vista Dual Boot
Jan 17, 2010
I downloaded Ubuntu about 5 months ago and love it.Problem is, I didn't know if I wanted to make it permanent on my computer, so I used the option which allowed me to download it as an application on my Windows Vista Control Panel.How can I increase the partition (I think I only have 9 GB left on my home folder) without loosing all of the preferences, applications, and hardware solutions that I have put on there?
View 1 Replies
ADVERTISEMENT
Sep 18, 2010
Last week I installed Ubuntu 10.04.1 on his Windows Vista machine, it has a 200GB hard-drive and he wanted 100GB for Vista & 100GB for Ubuntu on there. So instead of selecting the default partition I split it to 100GB each.
Now, however, I can't boot back into Windows and when it loads I am taken to the 'Recovery Tools' options. Have I 'cked up his partition? I can still view all the files/folders on his Windows partition from within Ubuntu however, so maybe there is a chance I can shrink down the Ubuntu partition again and restore his Windows partition?
[Code]...
View 7 Replies
View Related
Jan 7, 2010
I wanted to start exploring web development and perhaps hosting my own server as well as learning about linux and all the things that go with it so I downloaded the ubuntu 9.1 Server edition and burned it to a CD. I thought to put it on my Dell laptop as it is newer than my main PC and I could bring it to and fro between class. It had Vista installed and I definitely wanted to keep that in the meantime until I got more familiar with Ubuntu. The laptop has a 320GB hard drive with a 10 GB recovery partition. I went ahead and formatted the 10GB to make room for ubuntu. Also I was able to "shrink" the main windows partition by 16GB to make even more room. I could not combine the two small drives but alas. I had hoped to use the 16GB partition for the main install and the 10GB for a necessary swap drive (I am completely new to all this).
So I reboot on the server CD and get to the partition section. I was following this guide here: [url]
It seemed I did not want to do anything "guided" or "automatic" because the options were listing the entire drive and again i wanted to keep my vista untouched. So I go to manual partitioning and although the guide didn't go into enough detail I went ahead and assigned an "ext2" filetype to the larger partition and a "swap" to the smaller partition. Then I went to write changes to disk and after completing one of the two successfully the installer failed to configure the swap drive. I don't know why. I restarted to make sure windows was OK and surely it was not, as I got the dreaded "missing operating system" screen. I ran the windows recovery CD and lo and behold it could not find any drives at all, much less repair them. The data I had on the vista partition were not particularly vital, but it would be nice to have it back.
So my questions are, is there a way to recovery the windows partition? And how is the correct way to configure a dual boot system with Vista and Ubuntu 9.1 Server edition?
View 5 Replies
View Related
Mar 18, 2011
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies
View Related
Jan 6, 2011
Trying to boot alongside windows (just in case!). I downloaded the ISO from Ubuntu website before I saw the windows installer. After which I downloaded the windows installer! Now each time I try to load either one it tries to download the iso again. I'm only on a PAYG connection ATM so downloading again is not really viable this month!
I've tried to make a new partition using:
my computer/ management/ shrink
But the size that windows allows is 140MB which obviously is not enough, I tried burning the ISO to a CDROM and booting this way but windows did not bother booting the disc. I entered F2 BIOS and changed the boot order to my CDRW drive 1st but still UBUNTU did not boot. Windows recovery manager or something booted.
View 2 Replies
View Related
Jan 8, 2009
I have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
View 5 Replies
View Related
Feb 13, 2010
The problem is, on a machine, you can only have 4 primary partitions. sda1 and sda2 are my Vista and Recovery partitions respectively, which eliminates two of my primary partitions already. I myself have never used logical partitions, and was wondering if any of the partitions the Beginner's Guide recommends (/, swap, /var, and /home) could be made logical, and if I even need a swap partition.
View 5 Replies
View Related
Jan 18, 2010
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
View 9 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
Jan 13, 2010
I'm trying to get a dual boot set up for vista and 9.10
I already have 3 logical partitions
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x48000000
[Code]....
View 1 Replies
View Related
Jan 26, 2010
If I were to install windows vista shrink the partition to fit only the OS and dual boot Ubuntu over it would I be able to use windows programs on the Ubuntu install.
In a sense I am wondering if I can use Ubuntu as my primary OS and use my Windows Utilities through Ubuntu on the Ubuntu partition?
If not would it be possible to install them on the windows partition and launch them through Ubuntu?
View 3 Replies
View Related
Mar 21, 2010
upgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[code]...
View 2 Replies
View Related
May 2, 2010
I just successfully upgraded to 10.04 on my Ubuntu-Vista dual boot SONY VAIO. I do have a separate Ubuntu partition for /home. I have decided I want to abandon Vista entirely and do a fresh install of 10.04 so I will be able to use GRUB2. How do I proceed, short of totally wiping out the drive?
View 1 Replies
View Related
Dec 5, 2010
I'm new to the world of Ubuntu 10.10. My PC had windows Vista running on an 80GB HDD, and on Friday 03/12/10 I decided to install Ubuntu 10.10 on a second 160GB HDD. Wrongly I assumed I could simply have 2 HDD's in my PC and it would magically allow me to chose between Windows Vista and Ubuntu 10.10. Well that was 50 hours ago and I still can't get it to work. As you can see I have the results of my boot_info_script055.sh below.
PHP Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
Grub 2 isnstalled in the MBR of /dev/sda and looks on the same drive in partition # 1 for (,msdos1)/boot/grub.
=> Windows is installed in the MBR of /dev/sdbsda1:
File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub .....
View 9 Replies
View Related
Mar 8, 2011
Firstlyi want to specify that i read many threads and guides before posting this, tried to follow some advice and solutions but nothing worked (but I am a beginner user, and maybe i did something wrong!)My laptop is a Lenovo SL410 (i bought it in China) which came with pre-installed Windows Vista.I had many trouble with resizing the partition in order to make room for Ubuntu but i finally managed. I successfully installed Ubuntu 10.04 and everything works fine.My problem is that Grub shows"Windows Recovery Environment (loader) (on /dev/sda1)" instead of normal Windows Vista (which is on /dev/sda2)If i choose Windows Recovery Env. i can load Vista but is not stable, keeps crashing, or giving me warning about low memory
View 9 Replies
View Related
Dec 23, 2010
I dual booted ubuntu with vista a while back, but I was running out of space on both partitions. So I thought I'd install ubuntu on another slightly smaller HDD from an old laptop. I thought all the ubuntu and grub stuff were on that one partition, so I thought if I just deleted it, all would be good. I isn't. Now when I boot up, I get a message saying 'Error, no such partition exists' and then 'Grub rescue:' and an input. So what I want now, is well, basically to be able to boot windows. I'm guessing I either have to remove grub, or just make it forget I ever had Ubuntu.
View 6 Replies
View Related
May 6, 2009
I have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?
View 4 Replies
View Related
Apr 16, 2010
I have always use dual-booting vista--ubuntu, I am getting bit tired of windows, so I want to install ubuntu, specially lucid is coming soon. I want to have the possibility to install windows in case I will need it in the future, like working with Visual Studio, ubuntu always detect if windows is installed, if windows is installed first, does windows also detect if ubuntu is installed ?
View 8 Replies
View Related
Jun 5, 2010
I'm currently running Ubuntu 9.04 and Windows Vista in a dual boot system. I would like to completely erase Windows without damaging Ubuntu. I rarely use Windows and would like to clear up hard drive space.
View 9 Replies
View Related
Aug 25, 2010
I have Vista installed a 500 gb and recently added a 320 gb hard drive. How do I install ubuntu on to the 320 gb HDD and be able to dual boot the 2 operating systems? Also how do I keep myself from getting the symbol 'grub_puts' not found error when updating to 10.4?
View 5 Replies
View Related
Dec 23, 2010
I haven't done this in a long time, so I probably just need a quick refresher on a few things. I had to revert to Vista as my primary OS for more than a year to do CAD work, but now I finally have the freedom to move back to Ubuntu. I have my Win7 upgrade that I still haven't done (yes, I know I'm late to the party) and I want to update my Ubuntu 9.04 install to 10.10.
If I remember how to do this correctly, I should upgrade Vista to Win7 first, and then install Ubuntu second. I have two separate hard drives, so each OS will go on a separate one. The only issue I had in the past is that the drive with Ubuntu on it must be set as the primary boot device, otherwise GRUB wouldn't load. Is this all correct? I've been out of the Ubuntu loop for quite a while, are there any caveats to this process that I should be aware of?
View 9 Replies
View Related
Jan 21, 2011
I have a pretty good grasp on general computer works and I have read alot about the dual boot system and can do it with multiple variations of linux. My problem lies within my laptop, that I want to do a dual boot on (which is my only one with wireless). It is currently running Vista Home Premium-x86 and I would like the upgrade to Windows 7 Proffessional-x64. I have access to it but I have to keep Vista as is in order to keep Windows 7 as an upgrade which will have to be a custom install. This HD is dedicated to Vista and the backup partition as it is already.
I've read just about everywhere that you first have to do Ubuntu install and partition and then Windows, which makes sence, and then change the GRUB. However, I'm unsure about this case.
What would be the best way of going about making the partitioning scheme? I've already backed up everything possible so loosing that info is not the problem. Vista is the problem. My HD is a toshiba 320gbs- 2.5" form factor. My plan was to make 3 partitions. Windows, Ubuntu, and then the back up partion for Windows. I wanted to allocate Windows 150gb, Ubuntu 150gb, and then the other 20gb as back up for Windows.
View 1 Replies
View Related
Jun 11, 2009
One of the screens in the installer( middle of screen) will show what systems are on the grub menu, and one will be marked the default.
If the vista is not there (usually indicated by other), then click the add and select the correct boot partition (sda for vista) and change it's label to Windows Vista.
If other is there, click the edit button and change other to Windows Vista.
Finally, click the check box for the one you want to be the default boot. (you can always change that in the grub.conf later.)
View 14 Replies
View Related
Aug 27, 2009
I have Windows Vista Home Premium and I don't want to switch entirely to Fedora because I'm not as familiar with it as I am Windows. I mainly wanted to install Fedora for my Linux class at the Community College I attend. How do I install it with a dual boot so it doesn't take over Windows Vista? I had that happen once and it was a mess to fix and reinstall Windows Vista too.
View 7 Replies
View Related
Sep 13, 2010
I have been messing around with F13 in VM VirtualBox for awhile now. I have read in some places that it is better to install F13 into its own partition on the hdd creating a dual boot system for, in my case, Vista and F13. Any truth to this? I have been having problems with system settings in F13 while using VB. i.e.: sometimes the system will see 3d support, other times it won't. Sometimes it will see ethernet eth0 and then other times it won't. All my hardware from my MB to Display is supported according to the documentation I have looked at.
View 2 Replies
View Related
Jul 22, 2010
I run Lucid on ext3. I really miss not being able to reach Lucid from my dual boot Vista.I have installed the latest fsdriver. I have also tried this:[URL].. which does not work. (Is it because fsdriver is still in the system?) I also tried these methods but to no avail.[URL]. The problem seems to be related to fsdriver not being able to handle ext3 with Inode size = 256. Going back to ext2 for only the home partition seems complicated?
View 1 Replies
View Related
Oct 11, 2010
Installing Ubuntu on the laptop said it succeeded and required a restart, then before shutting down and after the cd popped out a string of
end_request: I/O error dev sr0, sector 2xxxxxx...
end_request: I/O error dev sr0, sector
end_request: I/O error dev sr0, sector
Thing is, grub didn't install! I'm pretty sure a full install of ubuntu 10.10 in on a partition that I can't access. To complicate matters further, loading Vista necessitated a restart when it installed a "generic volume driver" by itself. Restarting vista doesn't show any difference (obviously since vista can't see linux formatted partitions).
View 3 Replies
View Related
Jan 29, 2011
Cannot install Ubuntu10.10 from usb stick to Vista PC for dual boot-installer crashes.Launchpad report bug not allowing me to report new bug either!I have been trying to install 10.10 ALL day unsuccessfully. Unhappy about unsuccessful outcome!
View 9 Replies
View Related
Feb 1, 2011
I have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
View 2 Replies
View Related
Jun 15, 2011
I have just downloaded Ubuntu 11.04 and am trying to install it on a dual boot system with Windows Vista. I get as far as "Allocate drive space" but there are no partitions to choose from. I currently have Windows and Linux Mint on the hard drive and want to install Ubuntu in the same partition as Mint to overwrite it.
View 9 Replies
View Related
